PROVN OF VISITORS ROOM, TOILET BLOCK AND CERTAIN REVENUE WORK / MINOR WORK AT VARIOUS UNITS UNDER GE SATWARI

Amount

Surface excavation n.exc. 30 cm deep and averaging 15 deep and getting out in any type of soil and etc complete all as specified and as directed

Surface dressing n.exc 15cm deep and getting out in any type of soil and etc complete all as specified and as directed

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5M in depth for foundation etc and getting out in any type of soil complete all as specified and as directed.

Excavating in post holes (or similar holes) soft/loose each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n exc 25cm, watering and removing surplus soil to a distance n exc 50mm and making good surface complete all as specified and as directed.

Rough excavation not exceeding 1.5m deep and getting out in any type of soil complete all as specified and as directed.

Returning filling including spreading, levelling, watering and well ramming in layers n exc. 25cm etc complete all as specified.

Earth filling under floor including spreading, levelling, watering and well ramming in layers n exc. 25 cm thick etc complete all as specified and as directed

Removing excavated material n .exc 50 m and depositing, where directed at a level n. exc 1.5 m above the starting point complete all as specified and as directed.

Removing excavated material exc 50m but n .exc 100 m and depositing, where directed at a level n. exc 1.5 m above the starting point complete all as specified and as directed.

M&L for cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) as in foundation filling and mas concrete complete all as specified and as directed.

M&L for cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation filling and mas concrete complete all as specified and as directed.

M&L for RCC 1:2:4 Nominal mix type B1 using 20mm gradded stone aggregate as in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc.; basement slabs, under reamed piles and mass concrete etc complete all as specified and as directed

M&L for RCC 1:2:4 Nominal mix type B1 using 20mm gradded stone aggregate as in Columns, pillars, piers, posts and struts etc complete all as specified and as directed

Ditto all as per item No 13 above but as in Beams, cantilevers, bressummers, lintels over 1.5m span etc complete all as specified and as directed

M&L providing reinforced cement concrete type B1 (1:2:4) using 20 mm graeded stone aggregate as in roof slabs supported on walls surfaces of concrete flat etc complete all as specified.

Ditto all as per item No 15.00 above but in chajjas etc complete all as specified and as directed.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter etc complete all as specified and as directed.

Use and waste for form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200 mm thick (Horizontal or slopping) fair finished flat surfaces etc complete all as specified and as directed

Formwork to chullah hoods, chajjas, troughs and similar items including edges etc complete all as specified and as directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc complete all as specified and as directed.

Formwork to sides of pillars, posts, struts, piers, columns, and stanchions etc complete all as specified and as directed

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs exc 10cm but n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide etc complete.

M&L TMT bars 8mm dia cut to length, bent to shape required incl cranking, bending spirally for hoping for columns hooking ends and bindind with ms wire (annealed) not less than 0.9mm dia quality etc complete all as specified and as directed.

Ditto all as per item No 23 but 10 mm dia and over etc complete all as specified and as directed

Ditto all as per Item No 23 but 5 mm dia and over and incld 10mm dia in stirrups, spacers and binders etc complete all as specified and as directed.

M&L brick work with sub class B bricks burnt straight or curved on plan exc 6 M mean radius built in cement mortar 1:6 complete all as specified and as directed.

M&L brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified.

M&L rendering 15mm thick in cement plaster 1:4 on surfaces other than fair faces of brick work and surface finished even and smooth without using extra cement etc complete all as specified and as directed

M&L rendering 10mm thick in cement plaster 1:6 on fair faces of brick work and surface finished even and smooth without using extra cement etc complete all as specified and as directed

M&L rendering 10mm thick in cement plaster 1:3 on ceiling surfaces other than fair faces of brick work and surface finished even and smooth without using extra cement etc complete all as specified and as directed

Supply only liquid water proofing compound/admixture, ISI marked.

M&L Hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc.15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for 25 mm thick PCC (1:2:4) type B-O (Using 12.50mm graded stone aggregate) as in floor etc complete and all as specified and as directed.

Material and labour Vitrified Ceramic (Double Charged) edge cut joint free coloured or printed any shade tiles 10 mm thick (square/ rectangular) polished area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and set in neat cement slurry and pointed with coloured/ white cement to match with spacers over and including 15 mm thick screed bed in CM 1:4. (Sample as approved & Kept in GE's sample room)

M&L non skid joint free ceramic coloured tiles 7 to 8 mm thick (square / rectengular) area of each tile exceeding 0.11 sqm but not exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match. Including 15 mm thick screed bed in CM 1:4 etc complete. ( sample as approved & kept in GE's sample room)

Material and labour glazed ceramic coloured Digital tiles in vertical surface 300x450x7 mm thick, set and jointed in neat cement slurry and pointed white or colored cement to match the surface over and including 10 mm thick CM 1:4 all as specified. (Sample as approved & Kept in GE's sample room)

M&L for 15 mm thick rendering in cement mortar 1:4 on concrete surfaces when concrete is still green finished even and fair including mixing of water proofing compound as per manufacturer instruction etc complete all as specified and as directed. Note :- Water proofing compound shall be measured separately as supply only

M&L for water proofing treatment of any description incl under layer, taking down of cement plaster / demolition of cement concrete any thickness and removal of debris off the premises including grubbing up of trees and preparation of concrete surfaces by scrubbing down with steel brushes and cleaning with water to remove toremove all loose dirt/dust and applying roof treatment as below:-- (i) Applying a coat of bitumen primer membrane 0.4ltr/sqm by the same membrane manufacturer of density at 25 degree C’ 0.87-0.89Kg/Litre and viscosity 70-160 CPS till the surface properly impregnates and insolvent oil primer evaporates completely. (ii) Applying a coat of blown 85/25 graded bitumen confirming to IS 702 @ 1.2 Kg/sqm. (iiI) Applying Polymeric Polypropylene polymer membrane “APP” (Atactic poly propylene polymer ) modified prefabricated five layer 3mm thick not less than 3.6 Kg/Sqm with 160 grams/sqm non woven polyster made at centre core reinforced laid with 75 mm side overlap and 100 overlap in length using butane torch with 10cm over laps which shall be thermo fused by flame cpmplete all as specified.

Applying two coats of aluminium paint over the APP membrane all as specified. All joints and change in direction shall be covered with cement mortar 1:3 mixed with SBR latex @ 200 ml/bag of cement and curved before laying membrane.

S&F steel window 1.25 mm thick Box type (Double Shutter) ERW hollow P section of size 60 mm x 25 mm single rebated comprises glazed & wire gauged skelton shutter ERW sec 50 mm x 20 mm and 1 mm thick with two Nos sash bar of T- section 20 mm x 3 mm complete welded to frame with one vertical mullion of ERW box type T- section of size 60 mm x 25 mm and 1.25 mm thick including cutting holes and making good dismantled portion in PCC 1:2:4 type B-1 four No for each window incl following fitting welded to frame shutter hold fast of 150 mm long of 12 mm x 3 mm FI made to shape 4 No, handle of Z section 20 mm x 25 mm x 100 mm long 1 No per leaf, MS tower bolt 150 mm long 2 No per leaf, Z sec 20 mm x 25 mm, 100 mm long stopper 1 No on per leaf, MS Pintal hinges of size 75 mm x 12 mm 2 No per leaf fabrication, 10 mm Square bar gril, specing of gril 100 mm center to center and fixing arrangement as per drg No CEPZ/TD-324,325/0 ( Note:- Grill measured separately)

S&F steel Ventilator ( N exc 0.70 Sqm) 1.25 mm thick Box type (Double Shutter) ERW hollow P section of size 60 mm x 25 mm single rebated comprises glazed & wire gauged skelton shutter ERW sec 50 mm x 20 mm and 1 mm thick with two Nos sash bar of T- section 20 mm x 3 mm complete welded to frame with one vertical mullion of ERW box type T- section of size 60 mm x 25 mm and 1.25 mm thick including cutting holes and making good dismantled portion in PCC 1:2:4 type B-1 four No for each window incl following fitting welded to frame shutter hold fast of 150 mm long of 12 mm x 3 mm FI made to shape 4 No, handle of Z section 20 mm x 25 mm x 100 mm long 1 No per leaf, MS tower bolt 150 mm long 2 No per leaf, Z sec 20 mm x 25 mm, 100 mm long stopper 1 No on per leaf, MS Pintal hinges of size 75 mm x 12 mm 2 No per leaf fabrication, 10 mm Square bar gril, specing of gril 100 mm center to center and fixing arrangement as per drg No CEPZ/TD-324,325/0 ( Note:- Grill measured separately)

S&F Mild steel works of flat iron, square bar, round bars etc. as in framed work such as grills, guard bars, gratings etc incl bending, cutting and welding as necessary of confirming to Gde Fe 310-0 all as specified.

S&F 4 mm thick sheet glass ordinary quality glazing with steel pins,oil putty to steel windows and, beads nails etc to wooden surfaces as in square exc 0.50 sqm in each pane, all as specified.

S&F 4 mm thick figured glass, pin head/frosted type and glazing with oil putty in square n.exc 0.5 sqm in each pane.

M&L for PCC 1:3:6 type C-2 (40 mm stone agg) as in plinth protection 75 mm thick finishing cement concrete even and smooth without using extra cement etc complete all as specified and as directed

S & F pressed steel frames made of size 1.25mm thick MS steel for door with one or more rebates incl lugs, hold fast, lock strike plate etc complete of size 125 x 60mm including PCC 1:3:6 as in back fill to chowkats all as spfd.

M&L Flush shutters, 30 mm thick solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified. Note:- Sampel approved by Engr-in-Charge or GE.

Supply and fixing 35mm thick 2nd Class hard wood glazed, gauzed and skelton shutters open rebated and prepare to receive glass, gauge etc but divided into squares with plain chamfered or rounded mitred and rebated sash bars,stiles and rails as specified in SSR Part-I Sec 8 clause 8.24 (a) complete all as specified

S&F Galvanised mild wire cloth. 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples complete all as specified.

S&F Soild PVC door frame of size 50mm x 47mm made out of 5 mm plain coloured PVC sheet, reinforced with MS square tube supplying and fixing in opening as per specification and drawing.

S & F Factory made solid panel PVC door shutter 30 mm thick ( style ) consisting of frame work made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour P.V.C‘ C’ channel having a PVC sheet strip 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail lock rail and bottom rail on either side and as gap inserts for top rail; and bottom rail paneling of plain, colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles and rail with suitable PVC sheets beading and jointed together with solvent cement S&F in frame at site as per specification.

S&F Aluminium alloy, anodised, sliding door bolt Size 250 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed cpmplete all as specified.

S&F Aluminium anodised, barrel tower bolts size 200 mm of extruded section and fixed complete all as specified. (ISI Marked)

S&F Aluminium handles, cast type, anodised Size-150 mm, anodised section and fixed complete all as specified. (ISI Marked)

S&F butt hinges extruded aluminium alloy with galvanised mild steel hing pin anodised and fixed type C-21, 100 mm size complete all as specified and as directed

Supply and fixing mild steel helical ordinary rat tail rod pattern springs 300mm including roller and roller plate complete including fixing to pressed steel frames necessary welding work all as specified and as directed.

S&F aluminium Floor door stopper fixed complete all as specified.

S&F 25mm outer dia stainless steel decorative drapery rod of thickness 20-22 gauge and with stainless steel brackets near to ends with stainless steel finials for 25mm dia drapery rod at both ends. The drapery rod shall be projecting 150 mm outer side from the clesr opening of doors/windows. ( Including necessary fittings)

M&L for 75 mm thick plain cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregates) as in sub base to floors complete, all as specified and as directed by Engr-in-Charge

M&L for 75 mm thick plain cement concrete 1:4:8 type C-2 (using 40mm graded crushed stone aggregates) as in sub base to floors complete, all as specified and as directed by Engr-in-Charge

Material and labour for Cement concrete tiles 30cm x 30cm and 25mm thick, machine pressed set jointed and pointed in neat cement slurry with grey cement and in floors, and cut and polished, over and including 15 mm thick screed bed or bedding layer in cement mortar 1:4 for laying floor finishes, complete all as specified and as directed by Engr-in-Charge.

M&L for PCC 1:2:4 type B 1 using (20 mm graded aggregate) as in blocks for hold fasts, benching, coping apex stones, bed plates and the like including weathering slightly rounded or chamfered angles and throating all as specified. Note : Form work required for these items included in the unit rate of this item.

M&L Plain cement concrete 1:3:6 type C-1 (using 20mm graded aggregate) as in surface channel and drain including all necessary form work, complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc.complete all as specified.

M&L for preparation of new plastered surfaces of walls, & applying two coats of oil bound distemper over two coat of wall care putty of 1 to 2 mm thick and one coat of primer complete all as specified.

M&L three coat of white wash on walls including preparation of new plastered surface and complete all as specified

M&L for preparation of new ceiling, cornices surfaces and applying three coats of white wash complete all as specidfied.

M&L for preparing newly plastered surfaces of wall and applying two coats of cement base paint over a coat alkali resistant priming paint etc complete all as specified and as directed

M&L for preparation of new decorative plastered/concreat surface of wall surface finishing walls with premium acrylic smooth exterior paint wit silicone additive of required shade (Two or more coats applied @ 1.43/10Sqm over and including priming coat of exterior primer applied @ 2.20 Kg/10 Sqm ) with necessary scaffoding, including necessary filling of wall care putty on uneven surface as and where required all as specified.

M&L for applying two coat of synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description having width/girth exceeding 10 cm including preparation and rubbing with sand paper to make surface even and smooth complete all as specified.

M&L for applying two coat of synthetic enamel paint on new wooden surfaces of any description over a coat of pink primer having width/girth exceeding 10 cm complete all as specified including preparation and necessary filling by chalk putty as and where requered to make surface even and smooth.

M&L 16 to 18 mm thick Granite black (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, over 15 mm thick CM 1:4 as directed by Engr-in-charge.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth

Supplying, laying, jointing & testing galvanised iron pipe 15 mm bore medium grade with screwed joint together with all fitting such as bends, elbows, tees, short pieces and union etc fixed to walls or laid in floors complete all as specified and directed.

Supplying, laying, jointing & testing galvanised iron pipe 20 mm bore medium grade with screwed joint together with all fitting such as bends, elbows, tees, short pieces and union etc fixed to walls or laid in floors complete all as specified and directed.

Supply and fixing Rotational moulded polyethylene water storage tanks of 1000 litres capacity,(cylindrical vertical with closed top) with plastic lid cover, triple layered, white, hoisted and fixed in position all as specified in SSR Part-I including PTMT Ball valves high pressure with epoxy coated Aluminium rod & high density plastic ball complete, screwed for iron pipe or brass ferrule and fixed for 20 mm bore pipe, including making connections complete all as specified.

S&F Gun-metal, 20 mm bore, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified.

S&F Gun-metal, 15 mm bore, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified.

S&F 150mm internal dia, NP-2 RCC drain pipe grade 'A' laid in trenches laid and jointed complete with collars, with cement joints all as specified

Concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested, for 150mm bore of pipe plain cement concrete 1:3:6 type C-2 (Using 40mm graded stone aggregates) including necessary form work, complete all as specified and directed.

S&F PVC (SWR) pipes single socketed, 110 mm dia, in any length with rubber ring joints, laid in trenches or in floors complete all as specified.

S&F PVC (SWR) pipes single socketed, 75 mm dia, in any length with rubber ring joints, laid in trenches or in floors complete all as specified.

S&F PVC (SWR) bends any radius, 110 mm dia complete all as specified.

S&F PVC (SWR) bends any radius, 75mm dia complete all as specified.

S&F PVC (SWR) junction single, (Single T) equal or unequal, 110 mm bore complete all as specified.

S&F PVC (SWR) junction single, (Single T) equal or unequal, 75 mm bore complete all as specified.

S&F PVC (SWR) reducers 110 mm bore complete all as specified.

S&F PVC (SWR) vent cowl 75 mm bore all as specified.

S&F PVC (SWR) floor trap, plain with grating including jointing with solvent cement, 75 mm dia complete all as specified.

S&F CP Bib taps,long body, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified.

S&F fancy type CP stop angle valves, concealed type,cast copper alloy,chromium plated with long shank and cup screwed both ends for iron pipe or for unions and fixed for 15mm bore pipe, complete all as specified.

S&F Cromium plated, minimum 20 mm dia, single towel rail 600mm long complete all as specified.

S&F vitreous china wash basin white, flat back of size 580x 450mm including 32mm dia PVC waste pipe CP brass wast coupling 32 mm dia, pair of MS angle brackets or MS fastener/ bolts for fixing arrangements 450mm long PVC connection with PVC nut and washer complete at site and all as directed by Engr-in- charge.

S&F for full pedestal for WHB complete all as specified.

S&F Urinal with complete accessories Set, CP waste cuppling, waste pipe, sprader etc. Size 375 x 390 x 590mm complete all as specified.

S&F Vitreous china wash down water closet white colour, Size 520x360x390 with 'S' trap, closed pattern with flat bottom, including seat cover complete all as directed.

S&F WC Orissa pattern white with integral foot rest 580x 440 mm including L bend, & PCC bedding in 1:2:4 and making good disturbed floor connecting to trap and flush pipe compete all as specified.

S&F PVC valveless,syphonic action type, flushing cistern, low level,white with inlet, ball valve, float and handle including brackets, PVC 32 mm 'L' bend of capacity 10 litres complete all as specified and as directed by Engineer-in-charge.

S&F stainless steel lock grating plain/hole size 100 mm dia including embeding in tiles with white cement complete all as specified.

S&F jet spray (stainless steel) with 1 meter PVC tube complete all as specified.

S&F cromium plated hand shower (health faucet) with 8mm dia 1.20m long flexible tube and wall hook, complete all as specified.

S&F PVC Connection 15mm size with PTMT nuts of length 600mm for inlet/ outlet water connection complete all as specified directed.

S&F Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed.

M&L for Septic tanks, excavation in ordinary soil, foundation in PCC 1:2:4 brick work in CM 1:4 slab covers including RCC precast manhole cover having 6mm plate embadded all around / fibre reinforced cover with angle iron frame vent shaft and sludge chamber etc, complete for 10 users.

M&L for Soakage well excavation in any type of soil, foundation in PCC 1:3:6 wells of honey combed and solid in M-25 concrete, including intercepting chamber brick work in CM 1:4, RCC cover slab in M-25, filling with brick bats, complete of size 2.40 mtr dia x 3.0 mtr deep.

M&L for 100 mm thick plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in sub base to floors complete, all as specified and as directed by Engr-in-Charge

M&L for 75 mm thick plain cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) finished the floor even and smooth without using extra cement complete, all as specified and as directed by Engr-in-Charge

Supply only glass dividing strips 3mm thick 38mm depth fixed in concrete all as specified.

Demolition of brick work built in cement mortar or cement lime mortar incl all quoins, arches pillars etc and removing unserviceable material from the work site ouside defence premises complete all as specified.

Demolition of cement concrete (unreinforced) of any description not specifically provided for and removing unserviceable material outside defence premises complete all as specified.

M&L for MS work such as angle iron fencing posts struts and flat iron fillets etc, including drilling hole punching, splitting ends to secure chain link fencing or fixing of barbed wire to posts including all necessary cutting, welding bolting or riveting etc complete all as specified and similar work conforming to Fe-290 Gde E-165.

S&F Pre- painted galvalume aluminum zinc coating (AZ-150 Micron) GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified.

Supply only chain link MS galavnised gencing, of mesh size 100mm x 100mm of 4 mm dia, complete all as specified and as directed.

Fixing only chain link fencing incuding lines wires, any mesh, size and type to any type of standards rails, straining bolts etc including provision of binding wire, complete all as specified and as directed.

M&L for rolled section (MS flat iron) of size as required for supporting fence and similar work and bend to shape & welded as required conforming to Fe 410-W Gde-250

S&F for mild steel screwe bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends each screwed end to be fitted with washers and one hexagonal or square but, exc 5 cm long but n exc 10 cm long and dia of neck not less than 10mm.

S&F Galavanised 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails staining bolts, including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins etc as directed (each line wire to be measured).

M&L preparation of new steel surface of any descretion n exc 10 cm width or grith when unconnected with other painting or when painted in different time & applying two coat of synthetic enamelpaint over a coat of primer.

M & L for complete point wiring with 1.5 Sqmm single core multi stranded copper conductor FRLSH insulated and unsheathed heavy duty cable in colour code including contineous earth wire with cable of size 1.5 sqmm copper conductor flexible FRLSH insulated drawn in and including concealed PVC rigid conduit medium grade ISI marked after cutting chases in wall , plastering after concealing conduit , including modular galvanised flush boxes of suitable size and white cover plate with frame as per relevant IS for mounting modular switches, sockets, fan regulators etc complete all as specified and as directed for the following :- (a) One Light / Fan point controlled by one, one way switch 6 Amp complete

(b) One 3 pin socket outlet 6 amp independent

(c) One 3 pin socket outlet 6 amp same board

All as per srl item No 120 above but for one 3 pin socket outlet 16 Amp independent with cable of size 2.5 Sqmm for point wiring and 2.5 sqmm as in continuous earth wire.

Supply and fix modular type switch, one way 6 Amps , 1 module complete all as specified and directed.

Supply and fix modular type socket 5 pin, 6 Amps 2 module complete all as specified and directed.

Supply and fix modular type switch, one way 16 Amps, 1 module complete all as specified and directed.

Supply and fix modular type socket 5 pin, 6 A/16 Amps 2 module complete all as specified and directed.

Supply and fixing modular type fan regulator step down 120 watt 2 Module all as specified and directed.

Supply and fix ceiling rose surface, backelite, three terminal, 240 volts complete all as specified and directed.

Supply and fix LED light fitting 1 x 18Watt, 220V, AC decorative box type with driver, holder including LED Tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete with all fixing arrengenment all as directed by Engr in chage. Note:- The LED batten and LED tube rod shall be of same make.

Supply and fix of Recess mounting 2x2 LED luminarie, 36 W deep drawn CRCA housing with high power LED premium white powder coated frame blends seamlessly with ceiling layout, suitable for 600x600 mm modular ceiling grid and also can be suspended with provided kit, complete fitting with all fixing arrangement all as specified and directed by Engr-in-Charge.

S&F of lamp holder PVC/polycarbonate type with back plate for batten fitting.

S&F LED lamp suitable for B22 holder of capacity 10watt.

Supply and fix energy saving new generation 10W LED IP65 bulk head luminaire with opal diffuser complete all as specified and directed.

Supply and fix Distribution Board (SPN) double door 08 Way and should be IP 43 protected with Copper Bus bar 200 Amp rated, Earth Bar, neutral Bar Door Earthing.

Supply and fix Distribution Board (SPN) double door 04 Way and should be IP 43 protected with Copper Bus bar 100 Amp rated, Earth Bar, neutral Bar Door Earthing.

Supply and fix MCB SPN complete 32 Amp with rupturing capacity 10 KA 'C' series, complete all as specified and directed.

Supply and fix MCB Single pole 6 to 32 Amp with rupturing capacity 10 KA 'C' series, complete all as specified and directed

Supply and fixing ceiling fan complete with blade, down rods and accessories, 230 V, 1200 mm sweep, Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) and connected from ceiling rose/ connector with & including suitable size flexible copper conductor PVC insulated sheathed cord, complete.

Supply and fixing of exhaust fan, steel body AC single phase, 230V of size 300mm sweep with blades, and frame and louvers and including making of holes in wall, floor etc all as directed by Engr-in-charge.

M & L for complete earthing with galvanised mild steel earth plate electrode of size 600x600x6mm thick burried directly in ground earth (in vertical) earth pit not less than 2.25 mtr deep below normal ground level with top edge of the earth plate not less than 1.5 mtr below ground level connected to galvanised iron or earth lead wire 4mm dia (8 SWG) by means of nut, bolt, check nuts and washer of galvanised ironl including PCC pit in PCC 1:2:4 type B-1 pre-cast RCC cover slab using reinfocement with XPM weighing not less than 1.87 kg/Sqm with suitable handle made of 12mm round bar, including necessary excavation and earth work in any type of soil, 20mm dia medium grade galvanised steel tube for watering with one end fixed with cast iron funnel and wire mesh 15mm dia bore light grade galvanised steel tubing upto 7.5 m length for drawing earth lead wire protection, common salt, charcoal, etc complete all as shown in electrical plate No 3 of SSR Part-I and testing on completion.

Supply, laying or fixing or passing through pipe 1100 Volts grade heavy duty electric cable XLPE insulated & PVC outer sheathing with aluminium stranded conductor, armoured cable 16 sq mm 2 core cable nominal cross section complete all as specified.

Supply, laying or fixing or passing through pipe 1100 Volts grade heavy duty electric cable XLPE insulated & PVC outer sheathing with aluminium stranded conductor, armoured cable 25 sq mm 2 core cable nominal cross section complete all as specified.

Supply & fixing geysers of capacity 25 Ltr vertical storage type electric driven AC 230 Volt single phase BEE 5 star rating, rated pressure: 0.8 Mpa, inner tank: ultra-thick super cold rolled steel plates with CFC free thicker PUF insulation and incoloy glass-coated heating element 2000 watt including its fixing accessories complete all as specified and directed.

S&F sub main wiring with single core cable 2 x 2.5 sq mm FRLS insulated Unsheathed stranded copper conductor cable 1100 Volts grade in rigid PVC conduit (Concealed type) medium grade alongwith 1x 2.5 Sq mm FRLS insulated unheathed copper conductor cable as earth wire connected with main earth dolly including chiseling, cutting & making good to match with the existing surface complete all as specified and directed.

S&F socket residual current device (SRCD) DBOXx in steel enclosure with MCB SP 20 Amp and plug top 15/16 Amp all as specified and directed.

Supply and fix Desert Cooler Electric Driven (single phase), having nominal air flow capacity of 4000 Cum per hour (or nearest) steel body. (a) Size - 660x660x825mm with GI sheet 20 SWG (b) Fan Motor - Havey duty 200 watt (appx) 1400 RPM 230V 50 Hz (c) Pump Motor - ISI Marked (d) Pads - Wood wool pad of proper thickness in each panel. (e) Drain Plug - Brass drain plug shall be fitted on cooler body.

Supply, installation, testing & commissioning air cooled split unit air conditioner electric driven AC 230 V, 50 Hz single phase of capacity 1.5 TR, BEE 5 Star rated with cooling and intelligent heating facility incl its fixing accessories with fwg specification: Rated cooling capacity: 18000 Btu/Hr, Rated Current cooling : 7.8 Amp, Rated heating capacity: 18000 Btu/Hr, Copressor type: High EER twin Rotary, Anti dust/Anti-bacterial Filter, Dehumidifier, Refrigerant gas: R32, Operation: LCD Remote with self dignosis facility all as specified and directed. Note: Rate includes powder coated stand (bracket) for fixing of outdoor unit and cutting, chasing of wall/surface and making good as per site requirement.

Supply and fix Voltage stabiliser buck boost type, copper wound, wall mounted type for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 130 V to 300 V with output voltage stabilised at 230 V with accuracy of ± 2.5 % and of capacity 5.0 KVA incl inbuilt voltmeter with time delay relay all as specified and directed.

Supply & fix of MCB single pole (SP) 240 volt 25-32 amp, 10 KA rating 'C' curve for inductive load connected through cable lugs of suitable size complete all as directed and specified.

Supply & fixing of single pole and neutral sheet metal enclosure SPN MCB distribution board enclosure 2 way double door , 240 volts complete all as specified..

M & L for submain wiring alongwith earth wire with the sizes of 4 sqmm 2 single core multistranded FRLS PVC insulated copper conductor single core cable , multistranded and including suitable size of PVC Concealed conduit and all accessories fixing on walls / roofs / ceiling etc. earth dolly, terminated in terminal box complete.

Harsh Electricals

STAR CONSTRUCTIONS

Bidder Name

M/S PARAMJEET SINGH