Improvements to Raichur Bachi Sh-20 from Km 166.00 to 169.00 In Bagalkote constituency of Hungund taluk Bagalkote district (Under 4059-80-051-0-60-132 for the year 2025-2026)

Order Item Details Floor/Lift No. Base Rate Final Rate (Excluding GST) Quantity Net Amount (Excluding GST) Actions

1 Category : Vol - 3 -Chapter -4- SUB-BASES, BASES (NON-BITUMINOUS), SHOULDERS AND STABILIZATION METHODS --- 2359 2359 1584 3736656

Item Code : 4.2.B.v

Item Description : Granular Sub-Base - By Mix in Place Method - Construction of Granular Sub-Base of required grading as per design spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with front end loader at OMC and compacting with vibratory roller to achieve the desired density, complete as per clause 401 - For Grading -V Material. Ref to MoRT&H : IRC - 401

Rate Analaysis Performed ?: Yes

2 Category : Vol - 3 -Chapter -4- SUB-BASES, BASES (NON-BITUMINOUS), SHOULDERS AND STABILIZATION METHODS --- 2559 2559 1980 5066820

Item Code : 4.17

Item Description : Wet Mix Macadam (Plant Mix Method) - Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver/grader in sub-base / base course on well prepared surface and compacting with vibratory rollerto achieve the desireddensity. Ref to MoRT&H : IRC - 406

Rate Analaysis Performed ?: Yes

3 Category : Vol - 3 -Chapter -5- BASES AND SURFACE COURSES (BITUMINOUS) --- 41 41 7920 324720

Item Code : 5.1.A.i

Item Description : Prime Coat over WMM/WBM - Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 kg/m2 using mechanical means. Ref to MoRT&H : IRC - 502

Rate Analaysis Performed ?: Yes

4 Category : Vol - 3 -Chapter -8- TRAFFIC CALMING MEASURES, ROAD SIGNAGES & MARKING (ROAD FURNITURE) --- 530 530 1188 629640

Item Code : 8.15

Item Description : Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface - Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 g/m2 area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35:2015.The finished surface to be level, uniform and free from streaks and holes. Ref to MoRT&H : IRC - 803

Rate Analaysis Performed ?: Yes

5 Category : Vol - 3 -Chapter -8- TRAFFIC CALMING MEASURES, ROAD SIGNAGES & MARKING (ROAD FURNITURE) --- 365 365 975 355875

Item Code : 8.43

Item Description : Supplying and Fixing of Molded Shank Raised Pavement Markers / Cats Eye made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face and shall support a load of 16000 kg tested in accordance to ASTM D 4280 Type H and complying to Specifications of Category A of MORTH Circular No RW/NH/33023/10-97 DO III Dt 11.06. 1997. The height, width and length shall not exceed 50 mm, 100 mm and 102 +/- 2 mm and with minimum reflective area of 13 cm2 on each side and the slope to the base shall be 35 +/- 5 degree. The strength of detachment of the integrated cylindrical shanks, (of diameter not less than 19 +/- 2 mm and height not less than 30+/- 2 mm) from the body is to be a minimum value of 500 Kg. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturers recommendation and complete as directed by the engineer.The contractor shall submit a two year warranty for satisfactory field performance including stipulated retro-reflectance of the reflecting panel, to the Engineer. Ref to MoRT&H : IRC - MoRTH 806

Rate Analaysis Performed ?: Yes

6 Category : Vol - 3 -Chapter -8- TRAFFIC CALMING MEASURES, ROAD SIGNAGES & MARKING (ROAD FURNITURE) --- 8995 8995 1.08 9714.6

Item Code : 8.7

Item Description : Direction and Place Identification Signs upto 0.9 m2 Size Board. - Providing and erecting direction and place identification retro- reflectorised sign as per IRC:67:2022 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick or Aluminium composite material sheet with overall thickness of 4mm with area not exceeding 0.9 m2 fixed over back support frame of min 35 x 35 x 3mm angle mounted on a mild steel circular pipe 65 NB, firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 x 45 x 60 cm, 60 cm below ground level as per approved drawing. Ref to MoRT&H : IRC - 801

Rate Analaysis Performed ?: Yes

7 Category : Vol - 3 -Chapter -8- TRAFFIC CALMING MEASURES, ROAD SIGNAGES & MARKING (ROAD FURNITURE) --- 2889 2889 2 5778

Item Code : 8.16.ii

Item Description : Kilometre Stone - Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc - Ordinary kilometer stone (precast). Ref to MoRT&H : IRC - 805

Rate Analaysis Performed ?: Yes

8 Category : Vol - 3 -Chapter -8- TRAFFIC CALMING MEASURES, ROAD SIGNAGES & MARKING (ROAD FURNITURE) --- 820 820 8 6560

Item Code : 8.16.iii

Item Description : Kilometre Stone - Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc - 200 m stone (precast). Ref to MoRT&H : IRC - 805

Rate Analaysis Performed ?: Yes

9 Category : Vol - 3 -Chapter -5- BASES AND SURFACE COURSES (BITUMINOUS) --- 14 14 25740 360360

Item Code : 5.4.ii

Item Description : Tack coat on Granular surface treated with primer - Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.25 kg/m2 on Granular Surface. Ref to MoRT&H : IRC - 503

Rate Analaysis Performed ?: Yes

10 Category : Vol - 3 -Chapter -5- BASES AND SURFACE COURSES (BITUMINOUS) --- 9449 9449 1287 12160863

Item Code : 5.12.C

Item Description : Dense Graded Bituminous Macadam Grading - II for traffic <20 MSA - Providing and laying Dense Graded Bituminous Macadam with 40/60 TPH capacity HMP using crushed aggregates of specified grading, premixed with bituminous binder VG-30, @ 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with mechanical paver finisher to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects. Ref to MoRT&H : IRC - 505

Rate Analaysis Performed ?: Yes

11 Category : Vol - 3 -Chapter -5- BASES AND SURFACE COURSES (BITUMINOUS) --- 10626 10626 772.2 8205397.2

Item Code : 5.14.A.C

Item Description : Bituminous Concrete Grading I for traffic <20 MSA - Providing and laying Bituminous Concrete with 40/60 TPH capacity hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder VG-30 @ 5.2 per cent of mix and filler, transporting the hot mix to work site, laying with mechanical paver finisher to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects. Ref to MoRT&H : IRC - 507

Rate Analaysis Performed ?: Yes

12 Category : Vol - 3 -Chapter -8- TRAFFIC CALMING MEASURES, ROAD SIGNAGES & MARKING (ROAD FURNITURE) --- 3562 3562 10 35620

Item Code : 8.5.iv

Item Description : Retro-Reflectorised Traffic Signs - Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC:67:2022 made of Class B Type IV retro reflective sheeting fixed over 2 mm thick aluminium sheeting vide clause 803.1, 3mm/4mm thick Aluminium composite material sheet depending on the size of the sign fixed over the back support frame of min 25 x 25 x 3mm angle mounted on a mild steel circular pipe 65 NB, 3.2 mm thickness firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing.The sign shall be maintained as per section 12 of IRC:67:2022 - 60 cm equilateral triangle

Rate Analaysis Performed ?: Yes

13 Category : Vol - 3 -Chapter -6- CEMENT CONCRETE PAVEMENTS --- 1300 1300 60 78000

Item Code : 6.8.3

Item Description : Precast Cement Concrete Interlocking Blocks - Providing and laying 100mm thick factory made precast M -40 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Commercial Traffic Axle load repetitions more than 10MSA upto 20MSA for Industrial Streets, Bus & Truck parking of approved shape and colour, laid in required pattern and including over 40mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. (WMM/WBM Base to be paid separately as per relevant technical specification). Ref to MoRT&H : IRC - IRC SP 63:2018

Rate Analaysis Performed ?: Yes

14 Category : Vol - 3 -Chapter -8- TRAFFIC CALMING MEASURES, ROAD SIGNAGES & MARKING (ROAD FURNITURE) --- 9000 9000 1 9000

Item Code : 8.54

Item Description : Providing and fixing board displaying information, such as Name of work, Tender cost, Name of Contractor, Work completion and liability period etc, having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge & MoRTH specification 804. Ref to MoRT&H : IRC - MoRTH 804

Rate Analaysis Performed ?: Yes

15 Category : Vol - 3 -Chapter -8- TRAFFIC CALMING MEASURES, ROAD SIGNAGES & MARKING (ROAD FURNITURE) --- 51869 51869 4 207476

Item Code : 8.60.2.iii

Item Description : Pedestrian Crossings as per IRC 99-2018 - Providing Speed Breakers/Raised pedestrian crossings in Trapezoidal section with 2.5 m Top width and transition length of 0.8 m length and height of 0.1 m as per IRC 99:2018 using Dense Bituminous Macadam (DBM) Gr II and Bituminous Concrete (BC) Gr II for entire formation width & WBM Gr II for Shoulder hump portion only (150 mm thick), completing with road marking paint with applied thermoplastic compound with reflecting glass beeds on bituminous surface and providing 2 Nos. retro reflective traffic signs as per IRC 67 -2022 - Two lane with formation width of 9.00 m. Ref to MoRT&H : IRC - IRC 99 : 2018

Rate Analaysis Performed ?: Yes

16 Category : Vol - 1 -Chapter -I- Earth Work --- 102 102 3564 363528

Item Code : 1.14.1

Item Description : Mechanical Means - Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. In all kinds of soils Depth upto 3 m

Rate Analaysis Performed ?: Yes

Order Item Details Floor/Lift No. Base Rate Final Rate (Excluding GST) Quantity Net Amount (Excluding GST)

1 Category : Vol - 1 -Chapter -I- Earth Work --- 102 102 86.06 8778.12

Item Code : 1.14.1

Item Description : Mechanical Means - Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. In all kinds of soils Depth upto 3 m

Rate Analaysis Performed ?: Yes

2 Category : Vol - 1 -Chapter -II- Concrete Works 0 5918 5918 19.12 113152.16

Item Code : 2.1.3

Item Description : Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. - Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates

Rate Analaysis Performed ?: Yes

3 Category : Vol - 1 -Chapter -II- Concrete Works 0 6327 8541.45 94.19 804519.18

Item Code : 2.4.1

Item Description : Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - Mix 1:2:4 (M15) Using 20 mm nominal size graded crushed coarse aggregates

Rate Analaysis Performed ?: Yes

4 Category : Vol - 3 -Chapter -9- CROSS DRAINAGE WORKS --- 207 207 4050.06 838362.42

Item Code : 9.3

Item Description : Solid Round Glass Fibre Reinforced Polymer (GFRP) Bars for Concrete Reinforcement. - Supplying, fitting & placing GFRP (Glass fibre Reinforced Polymer) bars conforming to IRC 137:2022 for structures such as Crash Barriers, Concrete drains, Concrete pavements, Approach slabs as per drawing & technical specification. (Only GFRP Bars manufactured using Vinyl Ester Resin systems and Glass fibres classified as E-CR or R that meet the requirements of ASTM D578 shall be used.). Ref to MoRT&H : IRC - IS 18256:2023

Rate Analaysis Performed ?: Yes

Order Item Details Floor/Lift No. Base Rate Final Rate (Excluding GST) Quantity Net Amount (Excluding GST)

1 Item Code : SE BGM Circle Approved rates 36230 3.96 No --- 143470.8

Item Name : Road Maintenance for 3rd year for road with DBM+BC as wearing coat for Intermediate Line Maintenance of Road for 3rd year by Clearing and Uprooting Vegetation on either sides of the road, Maintenance of surface drains by clearing, cleaning, reshaping, deepening of side drains, Stripping excess soil from the shoulder surface and Making up loss of material/ irregularities on shoulder wherever necessary , Maintenance & painting of 200 metre and km stones , White washing of parapet walls of CD work and tree trunks , Patching of shallow and deep potholes using premixed bitumen mixes corresponding to the layers of the road and Repairs to CDs including Vent Clearance.

2 Item Code : SE BGM Circle Approved rates 64240 3.96 No --- 254390.4

Item Name : Road Maintenance for 4th year for road with DBM+BC as wearing coat for Intermediate Line Maintenance of Road for 4th year by Clearing and Uprooting Vegetation on either sides of the road, Maintenance of surface drains by clearing, cleaning, reshaping, deepening of side drains, Stripping excess soil from the shoulder surface and Making up loss of material/ irregularities on shoulder wherever necessary , Maintenance & painting of 200 metre and km stones , White washing of parapet walls of CD work and tree trunks , Patching of shallow and deep potholes using premixed bitumen mixes corresponding to the layers of the road and Repairs to CDs including Vent Clearance.

3 Item Code : SE BGM Circle Approved rates 87690 3.96 No --- 347252.4

Item Name : Road Maintenance for 5th year with DBM+BC coat as wearing coat for Intermediate Line Maintenance of Road for 5th year by Clearing and Uprooting Vegetation on either sides of the road, Maintenance of surface drains by clearing, cleaning, reshaping, deepening of side drains, Stripping excess soil from the shoulder surface and Making up loss of material/ irregularities on shoulder wherever necessary , Maintenance & painting of 200 metre and km stones , White washing of parapet walls of CD work and tree trunks , Patching of shallow and deep potholes using premixed bitumen mixes corresponding to the layers of the road and Repairs to CDs including Vent Clearance.

1 Item Code : Part-III P No.5 IT No. 2.3, 2.3.2 26 30 No --- 780

Item Name : Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:2010 1.5 mm2

2 Item Code : Part-III P No.5 IT No. 2.3.3 42 30 No --- 1260

Item Name : Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:2010 2.5 mm2

3 Item Code : Part-III P No.5 IT No. 2.3.4 63 30 No --- 1890

Item Name : Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with pecified IS-694:2010 4 mm2

4 Item Code : Part-III P No.6 IT No. 2.5.8 113 600 No --- 67800

Item Name : Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working voltage upto 1100 Volts as per IS-694:1990 3C x 2.5 mm2

5 Item Code : Part-III P No.16 IT No.5.13.3 5950 6 No --- 35700

Item Name : Supply and fixing of 3pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947.60 A

6 Item Code : Part-III P No.17 IT No.5.18.1 415 74 No --- 30710

Item Name : Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 6-32 A SP

7 Item Code : Part-III P No.17 IT No.5.18.4 739 12 No --- 8868

Item Name : Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 6-32 A DP

8 Item Code : Part-III P No.17 IT No.5.18.9 3088 3 No --- 9264

Item Name : Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 50-63 A TPN

9 Item Code : Part-III P No.20 IT No.5.40.1 2465 1.5 No --- 3697.5

Item Name : Supplying . A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete 100 A 4 x 30 x 6 mm Aluminium Strips

10 Item Code : Part-III P No.20 IT No.5.41.1 305 30 No --- 9150

Item Name : Supplying and fixing angle iron frame work fabricated out of M.S. angle iron. and M.S. Flat.with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. 40 x 40 x 6 mm

11 Item Code : Part-III P No.20 IT No.5.42.1 0.5 63000 No --- 31500

Item Name : Fabricating supplying and mounting MS box made out .SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc., complete. 14 SWG

12 Item Code : Part-III P No.21 IT No.5.48 4843 6 No --- 29058

Item Name : Supplying and fixing Microprocessor Based Astronomical timer Switch with using necessary bolts, nuts and washers.

13 Item Code : Part-III P No.46 IT No. 11.8.6 14705 50 No --- 735250

Item Name : Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70 degrees. CCT , 5500K, IP66 optical and electrical compartment & impact resistance of complete luminaire IK08. Power Factor 0.9 with mains, Surge Protection- Min 5KV along with Over voltage, Overload, short circuit,miss-wiring protection. Compatible for pole mounting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322 IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with .W System Power consumption. LED Efficiency 1301m/w, nominal CRI 75. Luminaire manufacturer should have in-house facility accredited by NABL,CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008. Housing with supplier word mark ,name shall be Engraved , Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree,Nichia,Lumileds Osram make LED Source. LED Streetlight 150 W. `

Item Name : Decorative light single poles Fabricating supplying and erection of 10 Mtrs long hot dip Galvanized conical pole with BSEN 10025 Grade S 355 J0 Steel plate for shaft I5 2052 for base plate with door opening arrangements including suitable boards, bakeling 50

Item Name : Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work

Item Name : Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates

Item Name : Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retalning walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine ciivil sr aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including lead & lifts, cost of all materials of quality, labour, Usage charges of machinery,

18 Item Code : 9.3 KPWD SR Volume-1 Page - 18 89457 1.25 No --- 111821.25

Item Name : Supplying, Fitting and Placing TMT Fe 500 & above Reinforcement in Foundation / Substructure / Superstructure complete as per Drawing and Technical Specifications.

19 Item Code : Part-III P No.54 IT No. 12.56 3510 15 No --- 52650

Item Name : Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit should be filled with equal proportion of salt and charcoal 150 mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as per lSI specification 7.3.3. of IS 732 using 12 mm dia bolts, nuts, washers and check nuts etc., the pipe shall have 16 through holes of 12 mm dia

Item Name : 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 16 Sqmm, 4 Core, (11 GI Strips - 4 x 0.8 mm)

Item Name : 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 25 Sqmm, 3.5 Core, (12 GI Strips - 4 x 0.8 mm)

Item Name : Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff LT Cable 2.5 to 25 Sqmm

Item Name : Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricading, caution lights, bracing, using sight rails & bonding rods at every 100 mm wherever necessary as directed, removal of stumps and other deleterious matter, dressing of sides and levelling the bottom of trench to the extent required , utilising the available excavated earth locally for the work etc., and all other appurtenances complete in the following strata All kinds of soils. Depth upto 1.50 m

Item Name : Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and rolling and lowering into trenches, laying true to line and jointing of pipes and specials with electrofusion welding, giving hydraulic test as per relevant ISS with all lead and lifts including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excation, testing and commissioning. The rate is exclusive of required specials and fittings HDPE Grade PE80-PN6.0, 63mm dia

25 Item Code : Stock material I.No. 8.02 75040 0.87 No --- 65284.8

Item Name : 8 SWG GI Wire(4.064 mm Dia), Std Wt: 131 Kg/KM

26 Item Code : Stock material P.No.27 I.No. 60.02 2 220 No --- 440

Item Name : Aluminium End Terminal (Lug) 16 Sqmm

27 Item Code : P.No. 19 I.No. 5.38 515 9 No --- 4635

Item Name : Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C.

28 Item Code : Part-III P No.19 IT No.5.31 4390 3 No --- 13170

Item Name : Supplying and fixing Electronic Trivector Meter (ETV) suitable for operation LT operation and -CT operated meter in polycarbonate body in class 0.5 accuracy as per IS 14697 and completely wired.

NAME OF WORK:Improvements to Raichur Bachi Sh-20 from Km 166.00 to 169.00 In Bagalkote constituency of Hungund taluk Bagalkote district (Under 4059-80-051-0-60-132 for the year 2025-2026) WI.NO-PWD/2025-26/RD/WORK_INDENT29692

Sl No Item Name Item Code Unit Quantity Amount

1 Item Name : Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:2010 1.5 mm2 Item Code : Part-III P No.5 IT No. 2.3, 2.3.2 M 30.00 780.00

2 Item Name : Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:2010 2.5 mm2 Item Code : Part-III P No.5 IT No. 2.3.3 M 30.00 1260.00

3 Item Name : Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with pecified IS-694:2010 4 mm2 Item Code : Part-III P No.5 IT No. 2.3.4 M 30.00 1890.00

4 Item Name : Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working voltage upto 1100 Volts as per IS-694:1990 3C x 2.5 mm2 Item Code : Part-III P No.6 IT No. 2.5.8 M 600.00 67800.00

5 Item Name : Supply and fixing of 3pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947.60 A Item Code : Part-III P No.16 IT No.5.13.3 Each 6.00 35700.00

6 Item Name : Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 6-32 A SP Item Code : Part-III P No.17 IT No.5.18.1 Each 74.00 30710.00

7 Item Name : Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 6-32 A DP Item Code : Part-III P No.17 IT No.5.18.4 Each 12.00 8868.00

8 Item Name : Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 50-63 A TPN Item Code : Part-III P No.17 IT No.5.18.9 Each 3.00 9264.00

9 Item Name : Supplying . A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete 100 A 4 x 30 x 6 mm Aluminium Strips Item Code : Part-III P No.20 IT No.5.40.1 M 1.50 3697.50

10 Item Name : Supplying and fixing angle iron frame work fabricated out of M.S. angle iron. and M.S. Flat.with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. 40 x 40 x 6 mm Item Code : Part-III P No.20 IT No.5.41.1 M 30.00 9150.00

11 Item Name : Fabricating supplying and mounting MS box made out .SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc., complete. 14 SWG Item Code : Part-III P No.20 IT No.5.42.1 Cm 63000.00 31500.00

12 Item Name : Supplying and fixing Microprocessor Based Astronomical timer Switch with using necessary bolts, nuts and washers. Item Code : Part-III P No.21 IT No.5.48 Each 6.00 29058.00

13 Item Name : Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70 degrees. CCT , 5500K, IP66 optical and electrical compartment & impact resistance of complete luminaire IK08. Power Factor 0.9 with mains, Surge Protection- Min 5KV along with Over voltage, Overload, short circuit,miss-wiring protection. Compatible for pole mounting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322 IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with .W System Power consumption. LED Efficiency 1301m/w, nominal CRI 75. Luminaire manufacturer should have in-house facility accredited by NABL,CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008. Housing with supplier word mark ,name shall be Engraved , Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree,Nichia,Lumileds Osram make LED Source. LED Streetlight 150 W. Item Code : Part-III P No.46 IT No. 11.8.6 Each 50.00 735250.00

14 Item Name : Decorative light single poles Fabricating supplying and erection of 10 Mtrs long hot dip Galvanized conical pole with BSEN 10025 Grade S 355 J0 Steel plate for shaft I5 2052 for base plate with door opening arrangements including suitable boards, bakeling 50 Item Code : AR Each 50.00 3150000.00

15 Item Name : Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work Item Code : 1.14.1 Cum 28.12 2868.24

16 Item Name : Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates Item Code : 2.1.3 Cum 2.82 16888.98

17 Item Name : Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retalning walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine ciivil sr aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, Item Code : 2.3.1 Cum 35.16 222292.65

18 Item Name : Supplying, Fitting and Placing TMT Fe 500 & above Reinforcement in Foundation / Substructure / Superstructure complete as per Drawing and Technical Specifications. Item Code : 9.3 KPWD SR Volume-1 Page - 18 Tonne 1.25 111821.25

19 Item Name : Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit should be filled with equal proportion of salt and charcoal 150 mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as per lSI specification 7.3.3. of IS 732 using 12 mm dia bolts, nuts, washers and check nuts etc., the pipe shall have 16 through holes of 12 mm dia Item Code : Part-III P No.54 IT No. 12.56 Nos 15.00 52650.00

20 Item Name : 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 16 Sqmm, 4 Core, (11 GI Strips - 4 x 0.8 mm) Item Code : 32.05 Km 2.70 382974.67

21 Item Name : 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 25 Sqmm, 3.5 Core, (12 GI Strips - 4 x 0.8 mm) Item Code : 32.07 Km 0.30 41864.70

22 Item Name : Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff LT Cable 2.5 to 25 Sqmm Item Code : 21.05 Km 2.88 60150.56

23 Item Name : Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricading, caution lights, bracing, using sight rails & bonding rods at every 100 mm wherever necessary as directed, removal of stumps and other deleterious matter, dressing of sides and levelling the bottom of trench to the extent required , utilising the available excavated earth locally for the work etc., and all other appurtenances complete in the following strata All kinds of soils. Depth upto 1.50 m Item Code : 1.17.1 M 937.50 245625.00

24 Item Name : Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and rolling and lowering into trenches, laying true to line and jointing of pipes and specials with electrofusion welding, giving hydraulic test as per relevant ISS with all lead and lifts including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excation, testing and commissioning. The rate is exclusive of required specials and fittings HDPE Grade PE80-PN6.0, 63mm dia Item Code : 9.1.1 Mtr 2680.00 506520.00

25 Item Name : 8 SWG GI Wire(4.064 mm Dia), Std Wt: 131 Kg/KM Item Code : Stock material I.No. 8.02 Mtr 0.87 65284.80

26 Item Name : Aluminium End Terminal (Lug) 16 Sqmm Item Code : Stock material P.No.27 I.No. 60.02 Nos 220.00 440.00

27 Item Name : Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C. Item Code : P.No. 19 I.No. 5.38 Nos 9.00 4635.00

28 Item Name : Supplying and fixing Electronic Trivector Meter (ETV) suitable for operation LT operation and -CT operated meter in polycarbonate body in class 0.5 accuracy as per IS 14697 and completely wired. Item Code : Part-III P No.19 IT No.5.31 Each 3.00 13170.00

29 Item Description : Granular Sub-Base - By Mix in Place Method - Construction of Granular Sub-Base of required grading as per design spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with front end loader at OMC and compacting with vibratory roller to achieve the desired density, complete as per clause 401 - For Grading -V Material. Ref to MoRT&H : IRC - 401 Item Code : 4.2.B.v Unit : m³ 1584.00 3736656.00

30 Item Description : Wet Mix Macadam (Plant Mix Method) - Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver/grader in sub-base / base course on well prepared surface and compacting with vibratory rollerto achieve the desireddensity. Ref to MoRT&H : IRC - 406 Item Code : 4.17 Unit : m³ 1980.00 5066820.00

Milestone-1 14645589.35

31 Item Description : Prime Coat over WMM/WBM - Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 kg/m2 using mechanical means. Ref to MoRT&H : IRC - 502 Item Code : 5.1.A.i Unit : m² 7920.00 324720.00

32 Item Description : Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface - Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 g/m2 area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35:2015.The finished surface to be level, uniform and free from streaks and holes. Ref to MoRT&H : IRC - 803 Item Code : 8.15 Unit : m² 1188.00 629640.00

33 Item Description : Supplying and Fixing of Molded Shank Raised Pavement Markers / Cats Eye made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face and shall support a load of 16000 kg tested in accordance to ASTM D 4280 Type H and complying to Specifications of Category A of MORTH Circular No RW/NH/33023/10-97 DO III Dt 11.06. 1997. The height, width and length shall not exceed 50 mm, 100 mm and 102 +/- 2 mm and with minimum reflective area of 13 cm2 on each side and the slope to the base shall be 35 +/- 5 degree. The strength of detachment of the integrated cylindrical shanks, (of diameter not less than 19 +/- 2 mm and height not less than 30+/- 2 mm) from the body is to be a minimum value of 500 Kg. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturers recommendation and complete as directed by the engineer.The contractor shall submit a two year warranty for satisfactory field performance including stipulated retro-reflectance of the reflecting panel, to the Engineer. Ref to MoRT&H : IRC - MoRTH 806 Item Code : 8.43 Unit : No. 975.00 355875.00

34 Item Description : Direction and Place Identification Signs upto 0.9 m2 Size Board. - Providing and erecting direction and place identification retro- reflectorised sign as per IRC:67:2022 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick or Aluminium composite material sheet with overall thickness of 4mm with area not exceeding 0.9 m2 fixed over back support frame of min 35 x 35 x 3mm angle mounted on a mild steel circular pipe 65 NB, firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 x 45 x 60 cm, 60 cm below ground level as per approved drawing. Ref to MoRT&H : IRC - 801 Item Code : 8.7 Unit : m² 1.08 9714.60

35 Item Description : Kilometre Stone - Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc - Ordinary kilometer stone (precast). Ref to MoRT&H : IRC - 805 Item Code : 8.16.ii Unit : each 2.00 5778.00

36 Item Description : Kilometre Stone - Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc - 200 m stone (precast). Ref to MoRT&H : IRC - 805 Item Code : 8.16.iii Unit : each 8.00 6560.00

37 Item Description : Tack coat on Granular surface treated with primer - Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.25 kg/m2 on Granular Surface. Ref to MoRT&H : IRC - 503 Item Code : 5.4.ii Unit : m² 25740.00 360360.00

38 Item Description : Dense Graded Bituminous Macadam Grading - II for traffic <20 MSA - Providing and laying Dense Graded Bituminous Macadam with 40/60 TPH capacity HMP using crushed aggregates of specified grading, premixed with bituminous binder VG-30, @ 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with mechanical paver finisher to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects. Ref to MoRT&H : IRC - 505 Item Code : 5.12.C Unit : m³ 1287.00 12160863.00

Milestone-2 13853510.60

39 Item Description : Bituminous Concrete Grading I for traffic <20 MSA - Providing and laying Bituminous Concrete with 40/60 TPH capacity hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder VG-30 @ 5.2 per cent of mix and filler, transporting the hot mix to work site, laying with mechanical paver finisher to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects. Ref to MoRT&H : IRC - 507 Item Code : 5.14.A.C Unit : m³ 772.20 8205397.20

40 Item Description : Retro-Reflectorised Traffic Signs - Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC:67:2022 made of Class B Type IV retro reflective sheeting fixed over 2 mm thick aluminium sheeting vide clause 803.1, 3mm/4mm thick Aluminium composite material sheet depending on the size of the sign fixed over the back support frame of min 25 x 25 x 3mm angle mounted on a mild steel circular pipe 65 NB, 3.2 mm thickness firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing.The sign shall be maintained as per section 12 of IRC:67:2022 - 60 cm equilateral triangle Item Code : 8.5.iv Unit : each 10.00 35620.00

41 Item Description : Precast Cement Concrete Interlocking Blocks - Providing and laying 100mm thick factory made precast M -40 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Commercial Traffic Axle load repetitions more than 10MSA upto 20MSA for Industrial Streets, Bus & Truck parking of approved shape and colour, laid in required pattern and including over 40mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. (WMM/WBM Base to be paid separately as per relevant technical specification). Ref to MoRT&H : IRC - IRC SP 63:2018 Item Code : 6.8.3 Unit : m² 60.00 78000.00

42 Item Description : Providing and fixing board displaying information, such as Name of work, Tender cost, Name of Contractor, Work completion and liability period etc, having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge & MoRTH specification 804. Ref to MoRT&H : IRC - MoRTH 804 Item Code : 8.54 Unit : No. 1.00 9000.00

43 Item Description : Pedestrian Crossings as per IRC 99-2018 - Providing Speed Breakers/Raised pedestrian crossings in Trapezoidal section with 2.5 m Top width and transition length of 0.8 m length and height of 0.1 m as per IRC 99:2018 using Dense Bituminous Macadam (DBM) Gr II and Bituminous Concrete (BC) Gr II for entire formation width & WBM Gr II for Shoulder hump portion only (150 mm thick), completing with road marking paint with applied thermoplastic compound with reflecting glass beeds on bituminous surface and providing 2 Nos. retro reflective traffic signs as per IRC 67 -2022 - Two lane with formation width of 9.00 m. Ref to MoRT&H : IRC - IRC 99 : 2018 Item Code : 8.60.2.iii Unit : No. 4.00 207476.00

44 Item Description : Mechanical Means - Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. In all kinds of soils Depth upto 3 m Item Code : 1.14.1 Unit : m³ 3564.00 363528.00

45 Item Description : Mechanical Means - Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. In all kinds of soils Depth upto 3 m Item Code : 1.14.1 Unit : m³ 86.06 8778.12

46 Item Description : Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. - Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates Item Code : 2.1.3 Unit : m³ 19.12 113152.16

47 Item Description : Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - Mix 1:2:4 (M15) Using 20 mm nominal size graded crushed coarse aggregates Item Code : 2.4.1 Unit : m³ 94.19 804519.18

48 Item Description : Solid Round Glass Fibre Reinforced Polymer (GFRP) Bars for Concrete Reinforcement. - Supplying, fitting & placing GFRP (Glass fibre Reinforced Polymer) bars conforming to IRC 137:2022 for structures such as Crash Barriers, Concrete drains, Concrete pavements, Approach slabs as per drawing & technical specification. (Only GFRP Bars manufactured using Vinyl Ester Resin systems and Glass fibres classified as E-CR or R that meet the requirements of ASTM D578 shall be used.). Ref to MoRT&H : IRC - IS 18256:2023 Item Code : 9.3 Unit : kg 4050.06 838362.42

49 Item Name : Road Maintenance for 3rd year for road with DBM+BC as wearing coat for Intermediate Line Maintenance of Road for 3rd year by Clearing and Uprooting Vegetation on either sides of the road, Maintenance of surface drains by clearing, cleaning, reshaping, deepening of side drains, Stripping excess soil from the shoulder surface and Making up loss of material/ irregularities on shoulder wherever necessary , Maintenance & painting of 200 metre and km stones , White washing of parapet walls of CD work and tree trunks , Patching of shallow and deep potholes using premixed bitumen mixes corresponding to the layers of the road and Repairs to CDs including Vent Clearance. Item Code : SE BGM Circle Approved rates Unit : Per Km 3.96 143470.80

50 Item Name : Road Maintenance for 4th year for road with DBM+BC as wearing coat for Intermediate Line Maintenance of Road for 4th year by Clearing and Uprooting Vegetation on either sides of the road, Maintenance of surface drains by clearing, cleaning, reshaping, deepening of side drains, Stripping excess soil from the shoulder surface and Making up loss of material/ irregularities on shoulder wherever necessary , Maintenance & painting of 200 metre and km stones , White washing of parapet walls of CD work and tree trunks , Patching of shallow and deep potholes using premixed bitumen mixes corresponding to the layers of the road and Repairs to CDs including Vent Clearance. Item Code : SE BGM Circle Approved rates Unit : Per Km 3.96 254390.40

51 Item Name : Road Maintenance for 5th year with DBM+BC coat as wearing coat for Intermediate Line Maintenance of Road for 5th year by Clearing and Uprooting Vegetation on either sides of the road, Maintenance of surface drains by clearing, cleaning, reshaping, deepening of side drains, Stripping excess soil from the shoulder surface and Making up loss of material/ irregularities on shoulder wherever necessary , Maintenance & painting of 200 metre and km stones , White washing of parapet walls of CD work and tree trunks , Patching of shallow and deep potholes using premixed bitumen mixes corresponding to the layers of the road and Repairs to CDs including Vent Clearance. Item Code : SE BGM Circle Approved rates Unit : Per Km 3.96 347252.40

Milestone-3 11408946.68

earth work 3650.06 2920.048

WMM/WBM 1980.00 1584

NAME OF WORK:Improvements to Raichur Bachi Sh-20 from Km 166.00 to 169.00 In Bagalkote constituency of Hungund taluk Bagalkote district (Under 4059-80-051-0-60-132 for the year 2025-2026) WI.NO-PWD/2025-26/RD/WORK_INDENT29692

Milestone dates Physical works to be completed Period from the date of issue of Notice to proceed with the work Amount Liquidated damages 0.1% of the contract price per day in Rupees rounded off to nearest hundred (Rs)

1 Item Name : Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:2010 1.5 mm2 2months 14645589.35 14645.59 36.70

2 Item Description : Prime Coat over WMM/WBM - Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 kg/m2 using mechanical means. Ref to MoRT&H : IRC - 502 2months 13853510.60 13853.51 34.71357726

3 Item Description : Bituminous Concrete Grading I for traffic <20 MSA - Providing and laying Bituminous Concrete with 40/60 TPH capacity hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder VG-30 @ 5.2 per cent of mix and filler, transporting the hot mix to work site, laying with mechanical paver finisher to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects. Ref to MoRT&H : IRC - 507 2 months 11408946.68 11408.95 28.58808597

Executive Engineer

PUBLIC WORKS DEPARTMENT DIVISION

Financial Year Total value of Civil Engineering works executed and payments received in the last five years (in Rs.lakhs)

Billed upto date during 2024-25

Attach Chartered Accountant's Yearwise Statements

Work executed as prime contractor (in the same name) on works of similar nature during the five years specified)

Project Name Name & Address of the Employer Name of Work Contract Number Value of contract Rs. Lakhs Date of markout / Date of Handing over of site Specified period of completion (including/ excluding Monsoon) Actual date of completion Remarks (appreciation letter received for early completion or reasons, if there is delay in completion)

Attach Workdone Certificate for each work indicated above, in Format 3, obtained from the Competent Authority.

FORMAT FOR WORK DONE CERTIFICATE TO BE OBTAINED FROM COMPETENT AUTHORITY

This is to certify that M/s Sri / Smt.

has executed / is executing (strike off which ever is not applicable) the work of..

in this Organisation. The details of the work is as under :

1 Name of the Project

2 Name of the Work

3 Contract Amount

4 Date of signing the Agreement

5 Date of handing over of the Site

6 Progress 2017

January February March April May June July August September October November December

Earthwork Physical in Cum

Financial in lac

GSB Physical in Cum

Financial in lac

WBM/WMM Physical in Cum

Financial in lac

Asphalting (Including DBM/BC/BM/SDBC) Physical in Cum

Financial in lac

6 Progress 2018

January February March April May June July August September October November December

Earthwork Physical in Cum

Financial in lac

GSB Physical in Cum

Financial in lac

WBM/WMM Physical in Cum

Financial in lac

Asphalting (Including DBM/BC/BM/SDBC) Physical in Cum

Financial in lac

PCC/RCC Physical in Cum

Financial in lac

TMT Steel Physical in Tonne

Financial in lac

6 Progress 2019

January February March April May June July August September October November December

Earthwork Physical in Cum

Financial in lac

GSB Physical in Cum

Financial in lac

WBM/WMM Physical in Cum

Financial in lac

Asphalting (Including DBM/BC/BM/SDBC) Physical in Cum

Financial in lac

PCC/RCC Physical in Cum

Financial in lac

TMT Steel Physical in Tonne

Financial in lac

6 Progress 2020

January February March April May June July August September October November December

Earthwork Physical in Cum

Financial in lac

GSB Physical in Cum

Financial in lac

WBM/WMM Physical in Cum

Financial in lac

Asphalting (Including DBM/BC/BM/SDBC) Physical in Cum

Financial in lac

PCC/RCC Physical in Cum

Financial in lac

TMT Steel Physical in Tonne

Financial in lac

6 Progress 2021

January February March April May June July August September October November December

Earthwork Physical in Cum

Financial in lac

GSB Physical in Cum

Financial in lac

WBM/WMM Physical in Cum

Financial in lac

Asphalting (Including DBM/BC/BM/SDBC) Physical in Cum

Financial in lac

PCC/RCC Physical in Cum

Financial in lac

TMT Steel Physical in Tonne

Financial in lac

7 Stipulated Period of Completion (including monsoon)

8 Prescribed Date of completion.

9 Actual Date of Completion/Probable Date of Completion.

10 Cost of balance work (if work is in progress)

11 Reasons if any for delay in completion, if work completion is delayed

12 Penalty if any imposed

13 Any other information.

* Monthlywise progress shall be furnished seperately.

Place : (Authorised Signatory)

Address for correspondence:

Monthly Physical and Financial Progress Achieved in all Contracts which are referred to in Format 3

Names of Works Item of work Names of Employers 2017

January February March April May June July August September October November December Remarks (Indicate contract reference)

Earthwork Physical in Cum

Financial in lac

GSB Physical in Cum

Financial in lac

WBM/WMM Physical in Cum

Financial in lac

Asphalting (Including DBM/BC/BM/SDBC) Physical in Cum

Financial in lac

PCC/RCC Physical in Cum

Financial in lac

TMT Steel Physical in Tonne

Financial in lac

Names of Works Item of work Names of Employers 2018

January February March April May June July August September October November December Remarks (Indicate contract reference)

Earthwork Physical in Cum

Financial in lac

GSB Physical in Cum

Financial in lac

WBM/WMM Physical in Cum

Financial in lac

Asphalting (Including DBM/BC/BM/SDBC) Physical in Cum

Financial in lac

PCC/RCC Physical in Cum

Financial in lac

TMT Steel Physical in Tonne

Financial in lac

Names of Works Item of work Names of Employers 2019

January February March April May June July August September October November December Remarks (Indicate contract reference)

Earthwork Physical in Cum

Financial in lac

GSB Physical in Cum

Financial in lac

WBM/WMM Physical in Cum

Financial in lac

Asphalting (Including DBM/BC/BM/SDBC) Physical in Cum

Financial in lac

PCC/RCC Physical in Cum

Financial in lac

TMT Steel Physical in Tonne

Financial in lac

Names of Works Item of work Names of Employers 2020

January February March April May June July August September October November December Remarks (Indicate contract reference)

Earthwork Physical in Cum

Financial in lac

GSB Physical in Cum

Financial in lac

WBM/WMM Physical in Cum

Financial in lac

Asphalting (Including DBM/BC/BM/SDBC) Physical in Cum

Financial in lac

PCC/RCC Physical in Cum

Financial in lac

TMT Steel Physical in Tonne

Financial in lac

Names of Works Item of work Names of Employers 2021

January February March April May June July August September October November December Remarks (Indicate contract reference)

Earthwork Physical in Cum

Financial in lac

GSB Physical in Cum

Financial in lac

WBM/WMM Physical in Cum

Financial in lac

Asphalting (Including DBM/BC/BM/SDBC) Physical in Cum

Financial in lac

PCC/RCC Physical in Cum

Financial in lac

TMT Steel Physical in Tonne

Financial in lac

* Monthlywise progress shall be furnished seperately.

Place : CONTRACTOR

Address for correspondence:

Information on works which are yet to be completed.

Project Name Name & Address of the Employer Name of Work Contract Number Value of contract Rs.Lakhs Date of Markout / Date of Handing over of site Speified period of completion (including / excluding Monsoon) Cost of balance works remaining Rs.in Lac Probable date of completion.

Attach Certificate for each work indicated above, in Format 3, obtained from the Competent Authority

Information of the works for which Tender acceptance letters are received.

Project Name Name & Address of the Employer Name of Work Tendered Amount in Rs. Lac Specified period of completion (including / excluding Monsoon) Probable Date of Handing over of site.

Attach letters of Acceptance received.

Information of the works for which Tenderer has submitted Tender.

Project Name Name & Address of the Employer Name of Work Amount put to Tender in Rs.lac Specified period of completion (including / excluding Monsoon) Prescribed last date of submission of tender Probable date of decision on the Tender Remarks if any.

List of Machinery

Item of Equipment Requirement Owned / Hired / Leased Owner / Hired / Lease and available Remarks

No. Capacity Number / Capacity Age / Condition

BANKER’S CERTIFICATE

This is to certify that M/s. ________________________________________________ is a reputed company with a good financial standing. If the contract for this work, namely ________________________________________________________ (name of the work) is awarded to the above firm, we shall be able to provide overdraft/credit facilities to the extent of Rs._______________________________ to meet the working capital requirements for executing the above contract

Signature of the Bank Manger

along with Seal

Information on litigation in which the Tenderer is involved:

Other Party/Parties Employer Details of Dispute Amount involved Remarks showing Present Status