PERIODICAL SERVICES INCLUDING SMART PERIODICAL TO INTERNAL OF BLDGS IN TECH AREA UNDER GE (AF) TECH AREA AT AF STN AGRA

Amount

Taking down cement plaster in cement or cement lime mortar on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc, Including removal of debries out side MoD land etc complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM (1:6) finished even and smooth (without using extra cement) etc complete all as specified and directed.

M&L for rendering 10mm thick in CM (1:3) on ceiling surfaces finished even & smooth without using extra cement etc complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of distemper oil emulsion white or tinted with roller, complete all as specified and directed.

M&L for prepration of new plastered ceiling surfaces and applying three coat of white wash etc complete all as specified and directed

M & L for preparation of old decorated surfaces of walls (plastered or unplastered) and cornices, by brooming down , scrapping down smoke soot, moss and efflorescent salts and trading oil and greasy spots etc and applying one coat of white wash after filling hole with putty etc complete all as specified and directed. Note:- All pot holes / cracks to be filled by putty and the same shall deemed to be included in the quoted rates.

Description all as per item (6) here in before but on ceiling surfaces and ditto.

M&L for complete removal of existing treatment on wall/ roof projections including facia, cornices etc by scrapping with mechanical sander (having mechanical vaccum machanism) with sanding pad of appropriate grit to make surface clean, free from dust, loose paint etc by skilled labour etc complete all as specified and directed.

M&L for preparation of old plastered surfaces of walls and applying two coats of distemper oil emulsion white or tinted with machanical means, etc complete all as specified and directed. Note:- All pot holes / cracks to be filled by putty and the same shall deemed to be included in the quoted rates.

M&L for preparation of old plastered surfaces of walls and applying One Coat of distemper oil emulsion white or tinted with machanical means, incl repair of holes and cracks in cm 1:4 and putty etc complete all as specified and directed.

M&L for preparation of old plastered surfaces of Ceiling and applying one coat of distemper oil emulsion white or tinted, with roller complete all as specified and directed. Note:- All pot holes / cracks to be filled by putty and the same shall deemed to be included in the quoted rates.

M&L for preparation of old painted surfaces of any description over 10cm girth or width, not otherwise described and applying two coats of Plastic emulsion paint complete all as specified and directed Note:- Plastic emulsion paint to be applied through mechanical means only. All pot holes / cracks to be filled by putty and the same shall deemed to be included in the quoted rates.

M&L gunniting to RCC works in column ,beams, slabs, landing, balconies etc by removing loose concrete including cleaning of plastered surfaces with wire brushes and applying epoxy, anti corrosive paint coating of minimum 40-50 microns thick to rusted steel reinforcement after removing/ cleaning all rust by sand/grit blasting and supply and fixing welded steel wire mesh of size 75mm x 75mm with 3mm dia steel wire as in facia/ drops and similar works etc and applying expoxy based bonding materials against treatment to be carried out on old concrete surface by using Sikadur 32 of Sika. Nito bond EP of fosroc or equivalent (as per manufacturers instruction) to bond old and new concrete by mixing @ 2% by weight of cement polycrete and providing gunniting with a minimum pressure of 2.5 Kg/sqcm and applying 25mm thick layers of gunniting in cement mortar (1:2) using ordinary port land cement of 43 grade wherever required complete all as specified and directed. Note:- (a) After placing the additionnal reinforcement all concrete surface shall be throughly scrubbed down with brushes washed with water and allow dry and apply, plaster complete all as specified. (b) Work to be carried out as in patches as directed by Engr-in-charge. The quoted rate shall be deemed the following:- (i) Scaffolding to carryout work ,15mm thick plaster in CM 1:4 and TMT bars (where applicable) . (ii) Preparation of new plastered surface and applying two coat of OBD with one coat of primer. "over 1mm thick wall care putty deemed to be included in this item"

M&L for preparing old decorated wooden or wood based surfaces over 10cm width or girth not otherwise described and applying one coats of synthetic enamel paint complete all as specified and directed.

M & L for prepararing old decorated steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint etc complete all as specified and directed.

Dismantling wall and ceiling boards ( fibre, pulp, insulation etc or insulation boards/ slabs/ blankets any thickness including cover filletts complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from steel frames complete all as specified and directed.

M & L sheet glass ordinary quality 3mm thick and glazing with oil putty in squares n.exc. 0.5 sqm each pane complete all as specified.

Providing & fixing false ceiling at (a) all heights with GRG (Glass Fibre With Semi With fully Reinforced Gypsum) false ceiling tiles of perforated perforated 12mm Size 595 x 595 mm of approved texture, 12mm thick thick micro tegular design and patterns having moisture micro tegular edged or 10 mm content less than 2%, humidity resistanceedged GRG thick square edged of 99%, NRC0.50 to 0.75 as per IS false ceiling GRG false ceiling 8225:1987, Noncombustible as per BS tiles tiles 4 76 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter?locking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main?T runners of size (Sleek 15 x 32 mm) of length 3000mm,cross-T of size (Sleek 15x 32mm) of length 1200mm and secondary intermediate cross-T of size (Sleek 15 x 32 mm) of length 600mm to form grid module of s1ze 600x 600mm , suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L?shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in?Charge.

M&L for GI powder coated snap grid frame work for false ceiling of approved (ISI marked) make fixed to galvanised iron steel angle grid 600x600mm size suspended system fixed to GI framed work with main runner (32x24x6.5)mm cross tee (27x24x2.5)mm and moulding (19x19)mm of approved make and section as specified in SSR Part II with suitable hook/fasteners and GI/aluminium suspenders not less than 4mm dia upto 1200mm length @ 1.00m C/C minimum. ceiling system is to be fixed in water level without any sag including ceiling cleats made out of GI flat iron 40x3mm size 60mm long and expansion hold fastner 12.5 mm dia 40mm long complete all as specified and directed.

S&F HPSC pre prime non asbestos fiber cement building board 4mm thick size 595x595mm with decorative finish fixed to GI powder coated snap grid frame work with screw in ceiling complete all as specified and directed.

S&F steel windows/ ventilators fabricated from 0.6mm thick roll formed section made of galvanised steel powder coated (Base steel as per IS- 513 'D' quality) galvanised as per IS-277 with Zinc of 120 gm/sqm. Windows/ventilators having frame suitable for dual shutter i.e. inner and outer shutter with grill, glazed shutter with 4.0 mm thick glass, mesh shutter with 32 gauge stainless steel mesh, 6mm x 12mm flat iron with 10mm square bar MS grill and all fitting, fixtures accessories complete including taking down of exstisting window and making good of surface all as specified NOTE: The quoted rate shall be deemed to be included the following:- (i) Glazed shutter with 4.00 mm thick glass, mesh shutter with 32 gauge stainless mesh and MS grill as per above mentioned drawing is deemed to be inclusive in the rate quoted. (ii) Glass, stainless steel mesh will be fixed to window by authorised rep of manufacturer of window only.

S&F in repair Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specifed and directed.

Note for all items :- (i) Any CI/AC/PVC pipes or pipe fittings damaged during the process of work shall be replaced by new one without any extra cost to the department. The decision of the GE at in this regrd shall be final and binding. (ii) The labour employed by the contractor for carrying out the work shall be provided with safety equipment and quoted rate shall be deemed to include the same. (iii) All window, joineries, mirrors, fittings and doors etc shall be covered before painting the surfaces and the same shall be cleaned including cleaning of floors as directed by the Engr in Charge, failing which a recovery shall be done from the RAR as decided by Garrison Engineer and quoted rate shall be deemed inclusive of these provision. (iv) Work to be carried out upto 25.00mtr ht with necessary MS scaffolding including all other safety precautions. Nothing extra shall be admissible on this account.

M/s Srijan Construction Company (BID ID -3403780)

aman construction & general suppliers (BID ID -3404004)

M/s M S Sharma and Co. (BID ID -3403473)

M/s K Prashad and Sons (BID ID -3397115)

Captainkomalchaharconstructions (BID ID -3410936)