PERIODICAL SERVICES TO SAILORS MARRIED ACCOMMODATION AT INS MANDOVI UNDER GE (P) NAVY MANDOVI

Amount

M & L for washing, rubbing down and stopping of distempered wall surfaces, preparation of the surface, making surface smooth by applying ready mix putty where ever required and applying two coats of oil bound distemper of any tint complete all as specified and directed.

M & L for preperation of old painted ceiling surfaces, making surface smooth by applying ready mix putty where ever required and applying one coat of distemper oil emulsion complete all as specified and directed.

M & L for complete removal of existing treatment and preparation of old ceiling surfaces and applying two coats of distemper oil emulsion over a coat of primer complete all as specified and directed.

M & L for preparation of old plastered wall surfaces and applying two coats of white wash complete all as specified and directed.

M & L for preparation of old plastered ceiling surfaces and applying two coats of white wash complete all as specified and directed.

M & L for preperation of old decorative wall surfaces, ceiling cornices etc by brooming, scrapping down dust particle, smoke soot, moulds, moss and efforescent salts etc, making surface smooth by applying ready mix putty where ever required and applying two coats of acrylic emulsion exterior paint including necessary scaffolding complete all as specified and directed.

M & L for washing, rubbing down and stopping of cemented wall surfaces, preparation of the surface and applying one coat of cement based paint complete all as specified and directed.

M & L for preparation of old painted wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M & L for preparation of old painted steel surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

M & L for rendering 15 mm (10+5) thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 in two layers i.e first layer 10 mm thick and 5 mm thick outer layer mixed with WPC as per manufacturer's instruction and surfaces finished even and smooth without using extra cement complete all as specified and directed. Note : Quoted rate shall be deemed to be inclusive of cost of WPC.

M & L for rendering 10 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces and surface finished even and smooth without using extra cement complete all as specified and directed..

M & L for rendering 5 mm thick in cement mortar 1:3 on fair faces of brick work or concrete ceiling surfaces and surface finished even and smooth without using extra cement complete all as specified and directed.

M & L for preparation of newly plastered wall surfaces and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed.

M & L for preparation of newly plastered wall surfaces, applying chalk whiting preparatory to distempering and distempering with two coats of distemper oil emulsion complete all as specified and directed.

M & L for preparation of newly plastered ceiling surfaces and applying three coats of white wash complete all as specified and directed.

Taking up or down steel tubing and connections of 15 mm dia bore complete all as specified and directed.

Taking up or down steel tubing and connections of 20 mm dia bore complete all as specified and directed.

Supplying and laying of CPVC pipe SDR 11 & plain CPVC SDR 11 fittings of 20 mm dia on walls/ ceiling or laying in floors complete all as specified and directed.

Supplying and laying of CPVC pipe SDR 11 & plain CPVC SDR 11 fittings of 25 mm dia on walls/ ceiling or laying in floors complete all as specified and directed.

S & F in repairs 2 in 1 health faucet with hook, chromium plated, with 1.5 m tube complete all as specified and directed.

S & F in repairs stop valve of PTMT, any colour, high pressure, screwed for iron pipe of 15 mm dia bore complete all as specified and directed. (Note: Minimum weight 15mm-90gms/ 20mm- 92gms)

S & F in repairs pillar taps of PTMT, any colour, high pressure, screwed for iron pipe of 15 mm dia bore complete all as specified and directed. ( Note: Minimum weight 15mm-110gms)

S & F in repairs bib tap, standard, of PTMT, any colour, high pressure, screwed for iron pipe of 15 mm dia bore complete all as specified and directed. (Note: Minimum weight 15mm-90gms/20mm- 125gms)

S & F in repairs bib taps (long body), cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule of 15 mm dia bore complete all as specified and directed.

S & F in repairs stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15 mm dia bore complete all as specified and directed.

S & F in repairs pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe of 15 mm dia bore complete all as specified and directed.

S & F in repairs swivel shower of PTMT (minimum weight 40gm), any colour for fixing with 15mm dia pipe and shower arm of 15 mm size, 195mm long with 45 degree bend and flange of PTMT any colour complete all as specified and directed.

S & F in repairs brass chromium plated shower rose, 125 mm size with shower arm of 15 mm size, 195mm long with 45 degree bend and flange, including fixing to steel pipe or union complete all as specified and directed.

S & F PVC connections of size 15 mm, 450 mm long with PTMT nuts complete all as specified and directed.

Taking down shutters of any descrption not exceeding 1.0 sqm each from chowkhats, complete all as specified and directed.

Taking down shutters of any description, exceeding 1.0 sqm but not exceeding 2 sqm each, from chowkhats, complete all as specified and directed.

Taking down chowkats or frames not exceeding 1.5 sqm each complete all as specified and directed.

Taking down chowkats or frames exceeding 1.5 sqm but not exceeding 4.0 sqm each complete all as specified and directed.

S & F 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S & F 2nd class hard wood, 35 mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); and fitted to chowkats complete all as specified and directed.

S & F factory made plain framed, panelled shutter (two panel) of 40 mm thick, with 2nd class hardwood rail and style, with lock rail and panel of 9 mm thick BWP commercial ply or 12 mm thick veneered particle board with commercial veneering on both faces, the size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

M & L for preparation of new wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.

S & F factory made panelled FRP door shutter, 30 mm thick with 2 mm FRP lamination top rail of size 30 x 150 mm; lock rail & bottom rail of size 30 x 150 mm with 12 mm thick panels of FRP section of box type construction as per IS 4020, core shall be polyurethane foam / high density (more than 40 kg per cubic meter) cellurar foam done in situ and fixed in position as per manufacturer's instructions complete all as specified and directed.

S & F 100mm X 63 mm size factory made FRP door frame, frame fixed with 3 nos on either side with MS flat iron 25mm x 3mm, cut to size & made to shape & fixed as in hold fast after necessary tarring & sanding and fixed as per manufacturer's instructions; with 2 mm thick FRP lamination, core made of polyurethane foam/ high density (more than 40kg per cubic meter) cellular foam done in situ including provision of second class wooden blocks to hold the fittings complete all as specified and directed. Note: Size of chowkats shall be inclusive of 2mm thick FRP lamination.

S & F in repairs mild steel ordinary rat tail door springs (capsule type), 300 mm long, including roller and roller plate complete all as specified and directed.

S & F in repairs extruded aluminium alloy handles, fabricated type, anodised, of 150 mm size complete all as specified and directed.

S & F in repairs aluminium anodised, barrel tower bolts of extruded section, 150 mm size complete all as specified and directed.

S & F in repairs aluminium alloy, anodised, sliding door bolt of 300 mm size, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed.

S & F 100 mm long butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.

S & F in repairs aluminium alloy wire cloth, 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples to wooden doors complete all as specified and directed. Note : Wooden beading will not be measured separately if changed during repairs.

S & F in repairs aluminium alloy wire cloth, 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples to aluminium windows complete all as specified and directed. Note: Aluminium u-clips will not be measured separately if changed during repairs.

S & F in repairs 32 mm dia waste pipe, 800mm long complete all as specified and directed.

S & F in repairs aluminium anodized alloy curtain rod, 19 mm dia, decorative type, including a pair of brackets for each window length complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M & L for 15mm thick screed bed or bedding layer of cement mortar 1:6 for laying floor finishes complete all as specified and directed.

M & L for rendering 10 mm thick on fair faces of brick work or concrete vertical surfaces in cement mortar 1:4 complete all as specified and directed.

M & L for glazed ceramic coloured tiles in vertical surface, 350 x 250 x 7 mm/ 450 x 350 x 7 mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M & L for glazed ceramic coloured tiles in vertical surface, 300 x 2050 x 7 mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M & L for non - skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular), area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M & L for non - skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular), area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

SANTOSH CONSTRUCTION

Ramesh Enterprises