Construction of 5MVA Sub-Station and 200 kVA transformer with L.T. Line complete at Ward no.41 Ganiyari PMAY Awas

Amount

Non SOR item

Supply installation testing and fixing of hanging /tension type clamp with 4 no connector

L.T.DB box

Pole painting

Energy meter

Supply and fixing clamp Patti G.I. pipe 32m.m. dia band type and nut bolt

Supply & fixing LED street light 90 watt with ISI make

Guarding per one span

Bracing set for 5 feet (1`.5 mtr.) center DP angle of 65x65x6 m.m.

Anti climbing device (barbed wire 3.5 kg) GS 2.5m.m. dia (12SWG)

Bracing set for 8 feet (2.45 mtr.) center DP angle of 65x65x6 m.m.

ACSR Dog conductor 0.10 Sq. inch (100 Sq.mm. AL. EQ.)

Jointing sleeves (alluminium) for dog conductor

Stone block / RCC base plate size 450x450x75 m.m. (3no. per stay & 1no. per pole for base padding as per drawing no discom/EZ/47 & 48)

Fencing of S/S land with barbed wire (as per drawing no. misc 22)

Yard fencing with chain link mesh over rcc beam (as per drawing no. misc-5)

MS main and wicket gate on RCC column (as per drawing no. no. misc-6)

MS sign board, bay indication board & RYB phase indication board (as per tender drawing no. misc-7)

Control room & internal electrification work for control room (as per drawing no.misc-1, 2, 3 & 4 size 6.00 X 5.00 m)

Yard leveling and metalling (as per drawing no. misc-10)

Toilet for staff and consumers including septic tank as per DRG. No. as per drawing no. misc-14

Approach road (WBM) with hume pipe culvert (as per drawing no. misc-11,12 & 13)

Approach road (RCC with ratio- 1:2:4) from main gate to power transformer foundation, size-(20x3) mtr (as per drawing attached ) fro black soil

Approach road, made by 60mm. thick factory made cement concrete paver block of m-30 grade, along the cable trenches upto various equipements in the yard

Approach road (RCC with ratio- 1:2:4) from main gate to power transformer foundation, size-(20x3) mtr (as per drawing attached ) fro hard soil

60 mtr. Deep 150 m.m. dia tube well

1000 liter P/F sintex overhead tank & GI pipe (with length of 125 mtrs) fitting for water supply including providing water tap(17no.) near transformer neutral earthing

Provinding and fixing 5HP Submersible pump

Providing & fixing perforated cable tray 300 mm. wide & 2 mm. thick fixed on 45x45x5 mm. M.S. angle stand grouted in C.C. 1:24 as per drawing misc-8)

Cost of retaining wall 1.5 m. high as per site requirement

Providing and fixing earth pit of brick massonery 0.6 x 0.6 m. inner size with flag stone cover for watering system for 18 no earth pits

Fire detection equipment

PTR 33/11 KV of TC 5000KVA (Loss 5.5 + 33KW)

11 KV VCB, outdoor porcelain clad type with complete structure and accessories

11 KV CT outdoor type 300-150 / 5 amp

11 KV control & relay panel with numerical static relay for transformer protection (1T)

33 KV VCB, outdoor porcelain clad type with complete structure and accessories

33 KV CT outdoor type 300-150 / 5 amp

33 KV control & relay panel with static relay for feeder protection

33 KV CT outdoor type 200-100/ 5-5 amp

33 KV control & relay panel with numerical static relay for transformenr protection

11KV CT outdoor type 200-100 / 5 amp

11 KV control & relay panel with numerical static relay for double feeder protection (2F)

Lead acid battery set 30 volt 100 AH

Battery charger 230 V AC input 10 amp. 30 v DC output solid state type

33 KV, isolator 600 amp, W/O earth switch TP gabg operated

11 KV, isolator 800 amp. W/O earth switch TP gabg operated

33 KV LA polymer type gapless/ metal oxide substation type

11 KV LA polymer type gaples /metal oxide 9 KV 10 KA substation type

33 KV/110 V 3P4W CT/PT ratio 400-200 /5 amp. outdoor oil immersed type

33 KV single phase PTS oil immersed

11 KV single phase PTS oil immersed

HT trivector energy meter, DLM compliant category-A (for substation /feeder metering), 3 phase 4 wire, 110 volts, 5 AMP, accuracy class 0.5 S with GSM (GPRS compatible ) modem

Sheet metal meter box suitable for H.T. static travector meters with TTB

DC distribution board with MCB

AC distribution board with MCB

Copper control cable 8 core, 2.5 sq.mm. PVC unarmoured

Copper control cable 4 core, 2.5 sq.mm. PVC unarmoured

Copper control cable 2 core, 2.5 sq.mm. PVC unarmoured

T clamp aluminum for bus bar panther run panther TAP

Bimetallic clamps for power transformer 11KV side

LT trivector energy meter, DLMS compliant category-A (for substation/ feeder metering), 3 phase 4 wire, 440 volts, 5 amp, accuracy class 0.5S with GSM (GPRS compatible) modem with Box

AAAC panther conductor 0.20 Sq. inch (200 Sq.mm. AL.EQ.)

Bracing set for 4 feet (1.2 mtr.) centre DP angle of 65x65x6

DC cross arms 8’ (2.4 meter ) centre to centre 100x50x6 mm. channel

Galvanised D.O. Mounting channel 75x40x6m.m.

GI earthing rod, 20 mm. dia, 2000mm. long

Rail 2 meter 52 KG/meter

PVC cable 2 core armoured 2.5 Sq.mm. aluminium conductor

PVC cable 4 core armoured 16 Sq.mm. aluminium conductor

Earthing for each sub-station

Earthing of transformer neutral with Two numbers 50x5 mm. copper strips, 3 Nos. 11 KV pin insulators mounted on 100x50 mm. MS channel support and AL. pad clamp with two bimetallic strips for twin panther conductor and AAACConductor

Chemical earthing at 33/11 KV S/S hardsoil min11 nos. of chemrod

Paiting of structures

11KV 1500 KVAR auto switch capacitor bask including associated EQ such as 11KV VCB, control panel, 11 KV outdoor current X’mer with adequated metering & protection class of service, bus & EQ

D.C. channel 2.70 mtr. Long

D.C. channel 4.8 mtr. Centre 100x50x6mm.

11 KV composite polymer strain set with hard ware suitable for panther conductor

Terminal clamps

Concreting (1:3:6) of foundation of VCB @3.5 CMT

Sheet metal meter box suitable for H.T. static travector meters with TTB

33 KV, 45 KN Disc polymer long rod type T&C insulator

33 KV composite polymer strain set with hard ware suitable for panther conductor

T clamp aluminum for bus bar panther run panther TAP

Concerting (1:3:6) of structure & foundation @ 0.5 CMT. Per structure

Piercing connector type-1, 1P/3P (main 16-50Sq.mm. Tap-off 16-50Sq.mm.)

Piercing connector type-II, (main 16-50Sq.mm. Tap-off 16-50Sq.mm.)

Stone block / RCC base plate size 450x450x75mm (3 no per stay & 1 no per pole for base padding as per drawing no. disc M/EZ/47 & 48

Spring loaded busbar system suitable for 1 incoming 6 outgoing 1 phase circuit

Spring loaded busbar system suitable for 1 incoming 3 outgoing 3 phase circuit

100 kVA, bis certified, level-II transformer

11 KV, LA polymer type gapless /metal oxide 9 KV 5 KA line type

Transformer mounting channel 100x50x6mm.

Transformer clamping set 50x50x6mm. angle 460mm long

Transformer belting set 50x50x6mm. angle with two cross fixing channel

XLPE LT 1 - core aluminium unarmoured 70 sq.mm. cable

XLPE LT 1 - core aluminium unarmoured 150 sq.mm. cable

PTR 33/11 KV of TC 3150 KVA (Loss 3+15 KW)

PTR foundation as per attached drawing

11 KV AB switch three phase 600 amp TP gang operated

33 KV AB switch 600 amp TP gang operated

Bidder Name

Amount

SHARDA ENTERPRISES(GSTN-23CHAPS7494D1Z7)

REMARK ELECTROCON PRIVATE LIMITED(GSTN-23AAGCR4790K1Z1)

R D ASSOCIATES(GSTN-23AKGPD0491C1ZU)

S D SINGH CONSTRUCTION(GSTN-NA)

REMARK ELECTROCON PRIVATE LIMITED

S D SINGH CONSTRUCTION

SHARDA ENTERPRISES

S D SINGH CONSTRUCTION

REMARK ELECTROCON PRIVATE LIMITED

SHARDA ENTERPRISES