8295/E8

Amount

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

Dismantling fencing wire mesh any type complete all as specified and as directed.

Demolition of plain cement concrete (unreinforced) in ground floors and pavings not exceeding 15 Cm thickness. (below or above ground level) complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water complete all as specified and directed

Taking down chowkats or frame, n.exc 1.5 Sqm each with shutters (without taking off shutter from the frame) complete all as specified and directed.

Taking down chowkats or frames, exe 1.5 but n.exc. 4 Sqm in each with shutter (without taking off shutter from the frame) complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm but n. exc 2 Sqm each complete all as specified and directed.

Material and Labour for plain cement concrete 1:2:4, type B-1 (using 20mm graded stone aggregate) for embedding holdfast, bed block, cills, etc including necessary form work complete all as specified and directed.

Material and Labour Brick work with fly ash bricks of designation 7.5, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directeded.

All as per item No. 11.00 here-in-before but for half brick wall in cement mortar 1:4.

Supply and fix 30 mm thick, Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides complete all as specified and directed.

Materials and Labour 2nd class hardwood plain, solid straight chowkats and frames, wroght, framed rebated on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.

Supply and fix factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified & directed by the Engr-in-Charge.

Supply and fix factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded, plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, as per specification and drawing and as directed.

Supply and fix Anodised aluminium anodised window and ventilator shutters, sliding / side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No), hinges type B-21 100mm long (2 Nos) suitable handle (1 No) including 4.0mm thick tinted glass, ordinary quality and glazing with aluminium / wooden beading in Square exc 0.50 Sqm in each pane complete all as specified and directed by Engineer-in-Charge.

Supply and fix Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws including 4.8mm thick tinted glass, ordinary quality and glazing with aluminium / wooden beading in Square exc 0.50 Sqm in each pane etc.complete all as specified and directed. Note for Item No.16 & 17:- Cost of glazing shall be measured and paid separately under relevant item of these Schedule.

Supply and fix Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat confirming to IS 1868-1996 for fixing etc. complete all as specified and directed. Note : (i) Thickness of aluminium section shall not be less than 1.5 mm.

Supply and fix Steel windows or ventilators, fixed type, with glazing bars complete including taking out old unserviceable one all as specified and as directed .

Supply and fix 100mm long butt hinges stainless steel complete all as specified and as directed.

Supply and fix 100 mm size, Butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.

Supply and fix 150mm Aluminium anodised barrel tower bolts of extruded section complete all as specified and as directed.

Supply and fix 200mm Aluminium anodised barrel tower bolts of extruded section complete all as specified and as directed.

Supply and fix 150 mm extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.

Supply and Fix 300mm aluminium, anodised sliding door bolt with hasp, staple(bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and as directed.

Material and Labour Mild steel framed work such as grills, gratings, gates etc., with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bar, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-410-0 Gde E-250 complete all as specified and directed.

Supply & fix Flat iron as in wind ties for roof including securing bolts, all necessary drilling, bolting or riveting, etc. and similar work conforming to Fe-290 Gde E-165 complete all as directed by the Engr-in-Charge.

Supply Only Mild steel TMT bars 8mm dia including binding with mild steel wire ( annealed) not less than 0.90mm dia complete.

Supply and fix Mild steel work in posts and struts and flat iron in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.

Supply only PVC coated MS galvanised Chain link fencing with straining bolts and binding wire complete all as specified and as directed. Note:- Line wires shall be measured and paid separately under relevant items of these schedule.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and as directed.

Material and Labour Water proofing treatment on RCC roof etc. comprising with the following operation and as specified here in below complete all as specified and as directed including taking out old unserviceable APP membrane alongwith roof padding concrete and screed bed:- (a) 20 mm thick screed bed in cement mortar 1:4 as in roof padding with slope 1:40. (b) Applying one coat of cold bituminous primer to the plastered surface @ 0.40 litres per Sqm conforming IS-3384. (c) A layer of APP based polymeric membrane membrane 3mm thick (minimum) weighing 3.6 Kg per Sqm reinforced with polyster non woven fabric (weighing not less than 160 gms/Sqm ) shall be applied over bituminous primer as specified above. Application of polymeric membrane shall be by torch application. The over lap shall be minimum 100 mm on transverse direction and 75 mm in longitudinal direction. (d) One coat of bituminious aluminium paint over the APP based membrane @ 0.11 Ltr/Sqm.

Material and Labour for 75 mm thick, plain cement concrete 1:3:6, type C-2 (using 40mm graded stone aggregate) as in plinth proction or pavings etc finishing cement concrete surface even and fiar without using extra cement complete all as specified and directed.

Materials and labour for non-skid, ceramic, coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 Sqm but n.exc 0.18 Sqm, in floors etc, including 15 mm thick screed bed in cement mortor 1:6 and set & jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed by Engineer-in-Charge.

All as per item No.34.00 here-in-before but on vertical surfaces such as skirtings, dados, risers etc over and including 10mm thick backing course in CM 1:4 complete all as specified and directed.

Materials and labour Glazed ceramic colour tiles in vertical surfaces such as skirtings, dados, risers etc of size 300 x 200 x 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement ot match the tiles over and including 10mm thick backing course in CM 1:4 for receiving tiles.

Material and Labour 25mm thick Pre polished coloured cement concrete chequerred tiles of size 300X300 mm jointed and pointed in neat cement slurry with white or coloured to match including over 20 mm thick screed bed CM 1:4 including dismentling old unserviceable chequerred tiles complete all as specified and directed.

Materials and Labour Machine cut kota stone slab flooring 20-25mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and including cement screed bed 15mm thick in cement sand mortar 1:6 including dismentling old unserviceable one all as specified and directed.

All as per item No.38.00 here-in-before but on vertical surfaces such as skirtings, dados, risers etc over and including 10mm thick backing course in CM 1:4 complete all as specified and directed.

Material and Labour Rendering 15mm (10 + 5 mm) thick in cement mortar 1:4 on fair faces of brick work or concrete surface in two layers each mixed with integral water proofing compound @ 2% by weight of cement (WPC shall be mixed with top layer only i.e 5mm thick) finished the surfaces even and smooth without using extra cement complete all specified and as directed. Note : - Water proofing compound shall be measured and paid separately as "Supply only" item under relevant item of these schedule.

Material and Labour Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished the surfaces even and smooth without using extra cement complete all as specified and directed.

Material and Labour Rendering 5 mm thick in cement mortor 1:3 on concrete surfaces as in ceilings (sunshed, chajja etc) and finishing surfaces even and smooth without using extra cement complete all as specified and directed.

"Supply only"lequid water proofing compound (ISI marked) complete all as specified and directed. Make:- STP NO 1/ PEDILITE(DR FIXIT)/ FOSROC/ CICO/ SIKA

Materials and labour Preparation of newly plastered wall surfaces of any description and applying two coats of Acrylic distemper of any colour / tint over a coat of primer complete all as specified and directed.

All as per item No. 45.00 here-in-before but in ceiling

Materials and labour Preparation of newly plastered wall surfaces of any description and applying two coats of Exterior emulsion paint ( Weather Coat) of any colour / tint over a coat of primer complete all as specified and directed.

Supply and fix 4.8 mm thick sheet glass ordinary quality and glazing with aluminium/wooden beading in square n.exc. 0.5 Sqm in each pane complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair 4 mm thick sheet glass ordinary quality and glazing with aluminium/wooden beading in square n.exc. 0.5 Sqm in each pane complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair 4mm thick pin headed/figured/frosted glass ordinary quality and glazing with aluminium/wooden beading in square n.exc. 0.5 Sqm in each pane complete all as specified and directed by Engr-in-Charge.

Material and Labour Preparation of new steel surfaces of any description, n.exc 10 Cm width or girth when unconnected with other painting or when painted in different tint and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Material and Labour Preparation of new steel surfaces of any description, over 10 Cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Material and Labour Synthetic enamel paint, two coats over a coat of pink primer over girth exc 10 Cm on wood or wood based surfaces after necessary preparation of surfaces complete all as specified and directed.

Material and Labour for Preparation of new steel surfaces of any description, over 10 Cm in width or girth, not otherwise described and applying two coats of Aluminium paint over a coat of Aluminium primer complete all as specified and directed.

Supply and fix 15 mm bore, steel tubes, galvanised, medium grade with all fittingSupply and fixixed complete to wall and ceiling or laid in floors etc complete all as specified and directed including taking down old unserviceable GI tubing with fiitings.

Supply and fix 20 mm bore, steel tubes, galvanised, medium grade with all fittingSupply and fixixed complete to wall and ceiling or laid in floors etc complete all as specified and directed including taking down old unserviceable GI tubings with fittings.

Supply and fixing in repair bib cock 15 mm bore cast copper alloy chromium plated with crutch or butterfly handle screwed for iron pipe or for brass ferrule etc complete all as specified and directed. Make- Essco Cat Part No. SQT 511KN or equivalent in Prayag/Jaquar .

Supply & fix in repair 15mm Pillar Taps, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with or without lettered "Hot" or "Cold" with long screwed shanks and fly-nuts, screwed for iron pipecomplete all as specified and directed. Make :Essco Cat Part No. SQT 507 KN or equivalent in Prayag/Jaquar .

Supply & fix in repair 15mm bore stop cock, cast copper alloy, chromium plated , screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed. Make :Essco Cat Part No. SQT 513AKN or equivalent in Prayag/Jaquar .

Supply and fixing in repair 10 litre capacity low level PVC flushing cistern (any colour), syphonic action type, with inlet, ball valve, float, handle, fixed with cast iron bracket (of suitable size) and providing 32 mm dia PVC flush pipe and making all necessary connections complete as directed. Make : Parryware Model No C-8090 or equivalent model of make “Hindware”/ Cera.

Supply and fix 550x400 size vitreous china wash basin white including 32 mm waste coupling of PTMT (half or full threaded, minimum weight 45 gms), waste pipe low density polyethylene pipe 32mm bore and brackets including taking down old wash hand basin alongwith fittings all as specified and as directed. Make:- Hindware Cat No. 10010 or equivalent of approved make in Jaguar, Cera, Prayag.

Supply and fix in replacement Vitreous China squatting pan of ‘Orissa pattern’, size 580 mm x 440mm (white) with ‘P’ or ‘S’ trap, front or back inlet and foot rests, any pattern complete including provision of PCC bedding and connection to trap, and to flushing pipe, antisyphonage pipe, etc. complete including making good to floor all as specified and directed by the Engr-in-Charge. Make : Hindware Cat No 20042 equivalent of approved make in Jaguar, Cera, Prayag.

Supply and fix in repair PVC connection 600 mm long fixed to 15mm GI pipe complete all as specified and directed. Make- Prayag/ Polytuf.

Supply and fix in repairs, Flush pipe of polyethylene of low or high density or PVC 32 mm dia, for low level cistern complete all as specified and directed

S&F Rotational moulded HDPE water storage tanks of 500 ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position,tripple layered ISI marked complete all as specified and directed including taking down old unserviceable tank . Make:- Sintax/ Polycon/ Oriplast

Supply and fix in repair 20mm bore ball valve PTMT high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule complete all as specified and as directed. Make- Prayag/ Polytuf.

Supply and fix 20mm bore ball valve PTMT high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule complete all as specified and as directed. Make- Prayag/ Polytuf.

Supply and fix 110 mm bore, PVC (SWR) pipe, single socketed, in any length with rubber ring joints fixed to wall etc complete all as specified and directed including taking down old unserviceable PVC(SWR) pipe with unserviceable fittings.

Supply and fix in repair 110 mm bore, PVC (SWR) pipe, double socketed, in any length with rubber ring joints fixed to wall etc complete all as specified and directed.

Supply and fix 110 mm bore, PVC (SWR) bends of any radius complete all as specified and directed.

Supply and fix 110 mm bore, PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

Supply and fix Steel rolling shutters, 1.25mm thickness of lath without ball bearing, as specified including top cover, an-choring rod, hasp and staple and one shop coat of primer; erected in position as indi-cated, complete: push pull or manual type including taking down old one complete all as specified and directed.

Supply and fix in repairs safety lever locks mild steel with 4 levers for rolling shutter complete all as specified and directed.

Supply and fix repairs Ball bearing for rolling shutter of existing type and size including taking down old one complete all as specified and directed.

Supply and fix repairs Profile for rolling shutter including taking down old one complete all as specified and directed.

Supply and fix repairs Locking plate for rolling shutter including taking down old one complete all as specified and directed.

Supply and fix repairs Spring for rolling shutter including taking down old one complete all as specified and directed.

Materials and labour Oiling and greasing of rolling shutter for smooth functioning complete all as directed by Engineer-in-Charge for shutter size n.exc 7 Sqm each complete all as directed by Engineer-in-Charge.

Materials and labour Oiling and greasing of rolling shutter for smooth functioning complete all as directed by Engineer-in-Charge for shutter size exc 7 Sqm but n.exc 12 Sqm each complete all as directed by Engineer-in-Charge.

Materials and labour Oiling and greasing of rolling shutter for smooth functioning complete all as directed by Engineer-in-Charge for shutter size exc 12 Sqm but n.exc 18 Sqm each complete all as directed by Engineer-in-Charge.

MS JYOTI INDUSTRIES

R.K.TRADING CO. INDIA

SOMANI BUILDERS

Tractors Machinary Components

M A ENTERPRISES