REPAIR TO CERTAIN MISC B/R AND E/M ITEMS AT MURADPUR UNDER AGE (I) AF AMRITSAR

Amount

M&L for Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits,manholes, pier holes, etc. nexc 10 sq m on plan and n exc 1.5 m in depth and getting out all as specified and directedby Engineer in Charge.

M&L for removal of excavated material exc. 250m but n exc. 500m and depositing all as specified and directed by Engineer-in-charge.

M&L for demolition of and breaking of any dia in cement mortar all as specified and directed by Engineer in charge .

M&L for laying concrete pipes of 300 mm dia , class NP2 laid and jointed complete with collars all as specified and directed by EIC.

M&L for concrete bed to drain pipes of dia 300mm including packing under and haunching against the sides of pipes after they are laid and tested all as specified and directed by EIC.

M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 , all as specified and directed by EIC.

M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls radius built in cement mortar 1:6 , all as specified and directed by EIC.

S&F Expanded metal n exc. 4 Kg/sqm cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members complete all as specified and directed

M&L for two coat synthetic enamel paint over a coat red oxide primer on new steel surface of any description over 10 cm width or girth not otherwise described including prepration of surface complete all as specified and directed by Engineer-in-Charge.

Demolition of Mud in roof any thickness including plastering and leeping (Whether full thickness removed or only a part therof) including removal outside defence land as directed by Engr-in-charge.

M&L for Demolition of reinforced cement concrete in any position and any description including cutting of reinforcement bars to facilitate demolition complete all as specified and directed.

M&L for Separating, scraping and cleaning of reinforcement (Demolition of concrete measured separately) all as specified and directed by Engr-in-charge

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete rail ings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizon tal or sloping and similar work exc 10cm but n exc 20cm wide to give fair finished surfaces all as specified and directed by EIC

M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping)

Material and labour for Formwork to sides and soffits of roof beams, lintels, cantilever, shelves, splay between floor and beam etc., flat fair finished concrete surfaces, complete all as specified and directed.

M&L for design mix M-25 using 20mm graded aggregate in roof slabs supported on walls, beams and columns in floors, shelves etc.complete all as specified and as directed by Engr-in-charge.

S&F mild steel TMT bars 10mm dia and over cut to length bent to shape reqd, incl cranking bending spirally for hooping for col,hooking ends and binding with and incl MS wire (annealed) not less than 0.9 mm dia or securing with clips qty confirming to Fe-410W(Gde- E-250) or Fe-290(Gde-E-165) complete all as specified and as directed.

-ditto- as per item No 7 here-in-before but 5mm dia & over upto and incl 10mm dia in stirrups, spacers and binders complete all as specified and as directed.

Taking down cement plaster on brick or concrete walls, ceiling etc, including racking out joints , hacking for key, scrubbing down with water etc complete all as specified & directed by EIC .

M&L for Rendering 12 mm thick in cement mortar 1:6 on brick or concrete surfaces of walls, finished even and smooth without using extra cement complete all as specified and directed by Engr-in-charge.

M&L rendering 15 mm thick in CM 1:4 on fair faces of brick work or concrete surfaces incl WPC, finished even and smooth without using extra cement all as specified and as directed.

M&L for preparing new plastered surface and applying two coats of whitewash on plastered surface of ceiling, walls all specified and directed by Engr-in-charge.

Demolition of cement concrete (unreinforced) in ground floors and pavings not excceding 15cm thickness (above or below ground level) all as specified.

M&L PCC type D2, 1:4:8 (using 40mm graded stone aggregate) as in foundation,filling , mass concrete as sub base all as specified and directed by Engr-in-charge.

M&L PCC type B-1, 1:2:4 (using 20mm graded stone aggregate) as in flooring etc all as specified and directed by Engr-in-charge.

M&L for dismatling of wrought iron or mild steel work of any description as specified and directed by engineer in charge all as specified and directed by Engr-in-charge.

S&F Pre-painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified.

M&L Framed work such as grills, gratings , etc with ends of bars shouldered and/or riveted, or forged into spikes; framed gaurd bars;barred iron doors ;ladders; framed balusters;walk ways;railings; frameworks of water tanks and similar work conforming to Fe 290.Gde-E-165 for portions framed and hung as gates , including hand made sliding bolts etc in doors or gates of angle or other section with gusset plates, rails, braces, etc., fixing complete all as specified and directed by EIC.

Providing and laying 80 mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved design & pattern and colour as in footpath , parks , lawns,drive ways or light traffic parking etc. of required strength , thickness & size/shape, made by table vibratory method using PU mould , laid in required colour & pattern over and including 50 mm thick compacted bed of fine sand , compacting and proper embedding/laying of interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator,filling joints with sand and cutting of paver block as per required size and pattern,finishing and sweeping extra sand including coping at sides of tiles from PCC 1:2:4 all as specified and directed by engineer in charge.

Providing and laying at or near ground level factory made kerb stone/saucer drain of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete.

S&F in repairs door closer hydraulicaly regulated, aluminium(Die cast ) body Designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed

S&F in repairs, Rotational moulded PVC water storage tanks 500 lit capacity, double walled (ISI marked) with ISI marking embossed on it (cylindrical vertical with closed top) hoisted and fixed in position including dismantling of old tank and removing to store all as specified and directed by engineer in charge .

S&F in repairs 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed by engineer in charge .

S&F in repairs 20 mm float/BALL valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe or brass ferrule complete all as specified and directed by engineer in charge .

S&F in repairs Mortice lock, vertical type, size 100 mm made of brass with two lever complete all as specified

Material and labour for fixing 3mm thick glass sheet of ordinary quality and glazing with oil putty in sqaures in n.exc 0.5 sqm in each panes including taking out of old broken glass ( any thickness,size,quality or description ) from wooden or steel frames with putty or fixed with beads, punching or drilling out old glazing pins/ spring clips and providing and fixing new ones complete all as specified and directed by engineer in charge.

Material and labour for applying two coats of Acrylic weather coat emulsion paint on newly plastered walls/ceiling/facias/ramp Surface etc in disruptive pattern having percentage of Six- colour as 29.04% of RGB Value (143, 152, 113), 22.48% of RGB Value (112,139,86), 14.98% of RGB value (123,137,126), 13.80% of RGB Value (84,97,75), 14.15% of RGB Value (123, 137, 94) and 5.55% of RGB Value (206,193,141) as per sample approved by AGE (I) for building of height upto 7.5 meter, over and including a coat of alkali resistance primer complete all as specified and directed. Note:- The rate quoted by contractor is demmed to include preparation of surfaces and necessary scaffolding for painting upto required height.

Taking down carefully copper / aluminum point wiring (light, fan, socket or power) complete with fittings such as switches, ceiling roses, pendants, lamp holders, bracket, light fittings, bulk head fittings, tube light fittings etc. and making good disturbed surfaces of walls, floors etc as per existing complete all as specified and directed.

Material and labour for Point wiring for One light / Celing fan/ Exhaust fan point/Bell point, controlled by one switch 5 Amp SP one-way complete with 1.5 Sq mm (nominal area) PVC insulated, unsheathed and multi strand copper conductor FRLS cable (ISI marked) drawn into and including PVC concealed conduit (medium quality) and conduit fittings including 1.5 Sq mm PVC insulated unsheathed and multi stranded copper conductor FRLS cable as earth wire to common earth and connecting to earth dolly including MS sunken box covered with 3mm thick bakelite laminated “hylem or Philips“ sheet top cover and machine made brass screw and washers etc complete all as specified and directed. Notes;- (i) For Internal wiring colour to be used as per IE rule for Phase - Red/Yellow/Blue, Neutral - Black and Earth – Green (ii) Making good on disturbed surfaces and quoted rate including M&L for white/colour wash (existing colour) to macth with existing surfaces, complete as directed by Engineer-in-Charge (iii) Switch/socket to be measured and paid separately.

(a) For one light/fan/bell point controlled by one 6 Amp one way switch

(b) All as per item No. 2 hereinbefore but wiring for one 3 pin 6 Ampere socket outlet point on the same board, controlled by other switch complete all as specified and directed.

(c) All as per item No. 2 hereinbefore but wiring for one 3 pin socket outlet 6 amps independent board.

All as per item No 2 hereinbefore but with 2.5 Sqmm size cable multy stranded FRLS copper wire unsheathed for one 3 pin socket outlet 16 Amp on independent board including continous copper solid conductor connecting to comman earth dolly completed all as specified and directed ny Engineer-in-charge for the following - (Note :- Sunken boxes, frame, plate is included in the quoted rate)

S & F of switch piano flush type single pole one-way 6 Ampere complete all as specified and directed.

S & F of switch piano flush type single pole one-way 16 Ampere complete all as specified and directed.

S & F of 6 Ampere socket outlet flush type, multi purpose suitable for 2 and 3 pins (Total 5 Pins) complete all as specified and directed.

S & F of socket outlet two-in-one, 3 pin each suitable for 6 and 16 Ampere flush type with shuttered complete all as specified and directed.

S & F of ceiling rose, surface bakelite, 65 X 50 mm, 3 terminals complete all as specified and directed.

S&F of lamp holder PVC / polycorbonate type insulated body with back plate suitable for batten fitting / angle fitting complete all as specified and directed.

Supply and fixing LUMENO LED tube light fitting 1x20 watts Havells with PVC insulated flexible copper cable from ceiling rose to tube light fitting complete all as per specified and directed.

S & F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd heavy duty 230 volts complete all as specified and dircted.

S & F On Load Changover 4 pole for DG set of frequency 50Hz current rating 100 Amp voltage of 415 V of make L& T, HPL or equivalvent with steel sheet enclosure conforms to IEC 947, EN 60947-3 complete all as specified.

Note: The Total amount shall subject to adjustment of credit for old Materials as per Schedule of Credit.

rajan builders (BID ID -3338145)

M/s AKG Engineers & Contractors (BID ID -3327945)

L-7 Primewave Communications (BID ID -3329656)

M/S SIMRAN WALIA ENTERPRISES (BID ID -3328630)

innovative associates (BID ID -3329642)

kapoor and co (BID ID -3327360)

MAAN ENTERPRISES (BID ID -3329747)