GE/BAS-12/2025-26 Special repair to culvert and path near building No P-39, P-07, P-17 and certain places at Basoli under GE Basoli

Amount

M & L for excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in any type of soil complete all as specified and directed.

M&L for earth work in excavation all type of soil by mechanical means (Hydraulic excavator) means over areas (exceeding 30 cm in depth,1.5 m in width as well as 10sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m, complete all as specified and directed.

M&L returning, filling and including spreading, levelling , watering and well ramming in layers not exceeding 25 cm complete all as specified and directed.

Removing excavated material to a distance n exc 50m and depositing where directed at a level n exc 1.5mtr above the starting point, complete all as specified and directed.

Removing excavated material to a distance exc 250m but n exc 500m and depositing where directed at a level n exc 1.5mtr above the starting point, complete all as specified and directed.

M&L Reinforced cement concrete M-25 (Design mix) using 20mm graded crushed stone aggregates as in foundations, including rafts, footings, foundation beams, plinth beams, bases of columns etc basement slabs, under-reamed piles and mass concrete complete all as specified and directed

M&L Reinforced cement concrete M-30 (Design mix) using 20mm graded crushed stone aggregates as in foundations, including rafts, footings, foundation beams, plinth beams, bases of columns etc basement slabs, under-reamed piles and mass concrete complete all as specified and directed

M&L for RCC M-25 (Design Mix) as in walls, retaining walls, basement walls and like including attached pilasters and buttresses complete all as specified and directed.

M&L for RCC M-30 (Design Mix) as in walls, retaining walls, basement walls and like including attached pilasters and buttresses complete all as specified and directed.

M&L Reinforced cement concrete M-30 (Design mix) using 20mm graded crushed stone aggregates as in slabs, supported on walls, beam and columns in floors, and in shelves and the like complete all as specified and directed.

Steel Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams,sides and sofits of foundation and plinth beams; and similar works; vertical or to batter for rough finished flat surfaces complete all as specified and directed.

Steel Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc with fair finishes; vertical or to batter complete all as specified.

M&L for fomwork to soffits of suspended slabs, landings and similar work exceeding 200mm thick (Horizontal or sloping) including fair finished surface complete all as specified and directed.

M&L for precast Reinforced cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) as in man hole covers set in cement mortar 1:6 including necessary form work. all as specified and directed Note: Steel reinforcement shall be measured and paid separately under respective items

M&L TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

-ditto- here-in-before but 8mm dia and over upto and including 10mm dia as in stirrups, spacers, binders complete all as specified and directed.

Material and labour for plain cement concrete type B-1 1:2:4 (20mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses,lacing courses, parapets and railings upto 60 cm in height,copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.

Demolition of Reinforcement concrete in any description and in any position complete all as specified and directed.

Demolition of plain cement concrete in ground floors or above ground floor and paving n.exc 15 cm thickness (Below or above ground level) complete all as specified and directed.

M&L for 75 mm thick PCC type C-2, 1:3:6 (using 40mm graded crushed stone aggregate) as in sub base complete all as specified and directed.

M&L for 100 mm thick PCC type B-2, 1:2:4 (using 40mm graded crushed stone aggregate) as in flooring/floor finishes complete all as specified and directed.

M&L for 100 mm thick PCC type C-2, 1:3:6 (using 40mm graded crushed stone aggregate) as in sub base complete all as specified and directed.

M&L for Premium Quality Durastone / Endura heavy duty vitrified tiles of size 300 mm x 300 mm x 10mm to 12mm thick as in floors and skirting set and jointed in neat cement slurry and pointed in white cement to match the surface complete over screed bed or bedding layer of mortar 15mm thick in cement mortar 1:4 for laying floor finishes complete all as specified and directed.

M&L 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc.,of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand completed all as specified and as directed.

M&L 80mm thick factory made chamfered edge cement concrete paver block of M-40 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc.,of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand completed all as specified and as directed.

M&L providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with CM 1:3 including making joints with or without grooves (Thickness of joints except at sharp curve shall not be more than 5mm), including making drainge opening wherever required complete all as specified and directed.

Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed

Supply & Fix in Trenches for Reinforced concrete pipes, class NP-3 600 mm dia, laid and jointed complete with collars, complete all as specified and directed.

M&L Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius with old size bricks built in cement mortar 1:4 incl complete all as specified and directed

M&L Cement concrete M-10 (Nominal mix),type C-2, 1:3:6, (using 40 mm graded crushed stone aggregates) in foundation filling and mass concrete, post holes etc complete all as specified and directed

M&L Cement concrete M-10 (Nominal mix), type C-1, 1:3:6, (using 20 mm graded crushed stone aggregates) in surface channel and drain etc complete all as specified and directed

Material and labour for Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and directed.

Taking down cement plaster on brick or concrete surface including racking out joints hacking for key scrubbing down with water etc. complete all as specified and directed.

M&L for Rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or conrete surfaces finishing the surface even and smooth without using extra cement complete all as specified and directed

M&L for preparation of new plastered surfaces of walls, etc. and applying two coat of cement based paints on the surfaces complete all as specified and directed

M&L for chequered cement conrete tiles 30cm x 30cm x 25mm thick with grey cement and pigment, set jointed and pointed in neat cement slurry as in floor including 20mm thick cement screed bed or bedding layer in CM 1:6 complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

M&L for Steel Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

Supply and laying for XLPE insulated, armoured, heavy duty electric cable with aluminum conductor, 1100 Volts grade, of size 185 Sqmm, 3.5 core and taking down old/brunt out electric cable any size and rating complete all as specified and directed. Note: Earth work including excavation, returning filling , removing, sand cushioning, GI pipe,brick covering for mechanical protection of cable etc will be measured and paid separately under respective items of BOQ

Supply & laying of approved quality sand under cable upto 15cm before laying the cable and 8cm over the cable after laying, punned down to overall thickness of 18cm in trenches for cable cushioning complete all as specified and directed. (Punned thickness shall be measured)

Material and labour for well burnt, old size Sub Class 'B' brick covering protection to the eletric cable laid dry flat transversally along the length of cable with width equal to length of brick complete all as specified and directed .

M&L Applying two coats of synthetic enamel paint over & including a coat of red oxide zinc chrome primer over new steel & iron surfaces of any description, not otherwise described, over 10 cm in width or girth, including preparation of surfaces complete all as specified and directed.

Supply and laying in trenches/under roads/under floor/on walls in new position tubing GI Light grade of 80 mm nominal bore of pipe with screwed sockets joints (such as bends, elbow, tees, etc) complete all as specified and directed.

Ms International Engineers (BID ID -3342068)