SPL REP BLDG NO T-15A(OFFRS MD ACCN)AT KURUKSHETRA LINE, REWIRING AT BLDG NO T-2 AND T-5,PROVN OF LED LIGHT, CEILING FAN AND EXHAUST FAN A/W ACCESSORIES AND NEW TOILET BLOCK(03XWC AND 01 WASH BASIN) INCL SEWAGE SYS AT RAMESHWARAM LINE UNDER GE RANCHI

Amount

Excavation in trenches n.exc 1.5 m in depth and n exc 1.5 m in width for foundation and getting out in hard/dense soil, complete all as specified and directed.

Demolition of cement concrete (unreinforcement) in ground floors and pavings n exc 15 cm thickness ( below or above ground level), complete all as specified and directed.

Demolition of cement concrete (reinforcement) any description and position not other wise specifically, complete all as specified and directed.

Demolition of brick wk masonry built in cement mortar incldg all quoins arches pillars etc, complete all as specified and directed.

Dismantling of AC sheet (corrugated or semi corrugated etc) including AC ridges as in roof covering, complete all as specified and directed.

Dismantling of wall and ceiling board any thickness/description including cover fillet, complete all as specified and directed.

Dimantling Plain or corrugated steel sheeting,any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and directed.

Taking down chowkat or frames with shutters (without taking off shutters from the frames) n.exc 1.5 Sqm each, complete all as specified and directed.

All as per item No 8 above but exceeding 1.5 Sqm and not exc 4 Sqm each, complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories, complete all as specified and directed.

Taking down cement plaster of any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.

Dismantling floor, hearth or wall tiling includiing cemenet mortar bedding, removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness bedded and pionted in any mortar asin floors, aprons etc, complete all as specified and directed.

Taking up or down 15mm dia steel tubing and connection including cleaning for re-fixing or removal from site, complete all as specified and directed.

Taking up or down 20mm dia steel tubing and connection including cleaning for re-fixing or removal from site, complete all as specified and directed.

Taking up or down 25mm dia steel tubing and connection including cleaning for re-fixing or removal from site, complete all as specified and directed.

Dismantling water tanks Capacity in Exc 500 & n exc 1000 litres and removing to store, complete all as specified and directed.

Removing excavated material (soil) to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m the starting point complete, complete all as specified and directed.

Returning filling in including spreading, levelling, watering and well ramming in layers n.exc 25 cm thick in soft / loose soil complete, complete all as specified and directed.

S & F 6 mm thick non-asbestos fibre cement corrugated sheet fixed with ‘L’ type or ‘J’ type or cranked hook bolts, complete all as specified and directed.

All as per item No 20 above but except sheets.

M&L Plain, galvanised, mild steel sheeting 0.63 mm, in ridges,hips, valley gutters,chajjas, drip and straight flashings, complete all as specified and directed.

M&L PCC 1:4:8 type D-2 using 40mm graded stone aggregare as in foundation filling & mass concrete, complete all as specified and directed.

M&L Brick wk with sub class ‘B’ bricks straight or curved on plan exc. 6m means radius in CM 1:6, complete all as specified and directed.

M&L for half brick wall work with old size brick straight or curved on plan to any radius built in cement mortar 1:4, complete all as specified and directed.

M&L for Plain Cement Concrete Cast-In-Situ Type B1, 1:2:4 (using 20 mm graded aggregateas in lintels upto 1.5m clear span, cills, copings, water troughs and the like weathering, slightly rounded or chamfered angles and throatings, complete all as specified and directed.

M&L for rendering in cement mortar (1:6) , 15 mm thick on fair faces of brick work / Concrete /stone surfaces finished even & smooth without using extra cement, complete all as specified and directed.

All as per Item No 27 above but in cement mortar (1:4), complete all as specified and directed.

M&L for GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel at 457mm centre to centre incl 2mm dia G.I. ( upto 1200 mm length ) adjusting level to Purlins/ Rafter, complete all as specified and directed.

M&L 4mm thick non asbestos fibre cement building designer ceilling board/E-board of size 600X600 fixed or laid/inserted to timber/GI/Aluminium framework with screws, complete all as specified and directed.

Providing & Fixing 100% solid WPC ( Wood Polymer Composite)- Door Frame 125 mm x 80mm Double Rebated Mullion Section made from Wood Polymer Composite ( Single Extruded Process) material comprising of virgin PVC polymer of K Value 57-60 ( Suspension Grade), Calcium Carbonate and nutral fibres ( wood Powder/Rice Husk/ Wheat Husk) and non toxic additives fabricated with meter Joints after applying PVC Solvent Cement & screwed with full body treated star headed screw holding capacity ( screw Withdral strength of ( Min 990 N), Minimum Compressive Strength of 58 N/Sqmm, Modulus of Elasticity 900 N/Sqmm and Resistance to spread of flame of class A category with property of being termite/ borer proof, Water/ Moisture Proof & fire Retardant & Fixed in position with SS Dash Fasteners/ Hold Fasts of required dia and length, complete all as specified and directed. (Hold Fast or Dash Fasteners shall be paid separately) Make: RAJSHRI.

S&F 100% solid WPC ( Wood Polymer Composite)- Door Frame 100 mm x 50mm Single Rebated Mullion Section made from Wood Polymer Composite ( Single Extruded Process) material comprising of virgin PVC polymer of K Value 57-60 ( Suspension Grade), Calcium Carbonate and nutral fibres (wood Powder/Rice Husk/ Wheat Husk) and non toxic additives fabricated with meter Joints after applying PVC Solvent Cement & screwed with full body treated star headed screw holding capacity ( screw Withdral strength of ( Min 990 N), Minimum Compressive Strength of 58 N/Sqmm, Modulus of Elasticity 900 N/Sqmm and Resistance to spread of flame of class A category with property of being termite/ borer proof, Water/ Moisture Proof & fire Retardant & Fixed in position with SS Dash Fasteners/ Hold Fasts of required dia and length, complete all as specified and directed. (Hold Fast or Dash Fasteners shall be paid separately) Make: RAJSHRI.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing, complete all as specified and directed.

S&F, factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rails, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles and rails with suitable PVC sheet beading and jointed together with solvent cement, in the frame at site as per specification and shown on drawing in SSR Part-II (2020) .

S&F factory made solid PVC Moulded door shutter 30mm thick(stiles) with 2 mm thick Moulded PVC sheet on the front face & 2 mm plain colour PVC sheet on back faces,and with particle board core supplying and fixing in frame at site as per specification and drawing, complete all as specified and directed

S&F factory made wire gauzed PVC door shutter 30 mm thick style consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded both side prelam PVC Sheet and stile & rails feathered at edges having a PVC sheets strip of 20 mm width stuck inside with solvent cement for stiles and prelam PVC sheets for top rail, lock rail and bottom rail on either side and as gap inside for top rail and bottom rail.panel will be wire gauze in lieu of prelam sheet ,the wire gauze shall be wrapped on an additional square 8mm M.S.Solid tube and this tube shall be welded to M.S Tube.the wire gauge shall be stretched to tighten firmly supplying and fixing in the frame at site as per specification and drawing, complete all as specified and directed.

Supply and fix for Three Track Sliding powder coated aluminium Window of sizes of Top/Side and Bottom track section of 91.80mm x 31.75mm x 1.20mm thick and Shutter section of sizes 39.40 mm x 17.70mm x 1.20mm thick including joining cleats, beading,locking arrangement, rubber gasket for fixing etc complete with 5.5 mm thick tinted glass & stailness steel wire cloth, 0.36 mm nominal dia of wire and average, complete all as specified and directed. Make: Hindalco or equivalent

Supply and fix for powder coated aluminium ventilator cross section 61.60x31.75x1.2mm consisting of two portions one portion shall have louvers with 4mm thick pin headed glass and aluminium wire cloth 0.36mm nominal dia of wire and average width of aperature 1.40 mm fixed with aluminium beads and securing on outer face of frame and second portion shall consist a opening for exaust fan, complete all as specified and directed. Make: Hindalco or equivalent

S&F frame work such as grills, grating etc with ends of bars shouldered and or rivetted or forged into spikes, framed guard bars, barred iron doors, ladders etc and similar wks conforming to Fe-290 Gd E-165.

S&F for straps, supports or suspenders, hooks for hanging fans, hold fast , clamps ,hooks,Wind ties for roof including securing bolt and similar small article etc. confirming to Fe 290 Gde E165, complete all as specified and directed.

M&L for Plain Cement Concrete cast in situ Type B1 1:2:4 (20mm graded aggregate) using 20 mm graded aggregate as in hold fast, complete all as specified and directed.

Cutting holes in brick walls built in cement mortar for inserting hold fast and making good dismantled portion in cm (1:3) or cement mortar 1:2:4 Type B-1 exc half brick but n.exc one brick thick, complete all as specified and directed.

All as per item No 42 above but n.exc half brick.

S&F 100 mm Butt hinges medium weight medium cold rolled mild steel.

S&F 200 mm long aluminium anodised barrel tower bolt of extruded section, complete all as specified and directed.

S&F of 150 mm size aluminium handles cast type anodised.

S&F Mild steel 300 mm long ordinary rat tial rod pattern springs including roller and roller plate complete all as directed.

S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixibng bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed.

M&L for Stainless steel wire cloth for 0.36 mm nominal dia of wire & average width of aperture 1.40mm fixed with tinned tacks or galvanised wire staples etc, complete all as specified and directed.

S&F floor door stopper 150 mm of aluminium alloy body and tongue anodised with hard drawn steel spring fixed in repair, complete all as specified and directed.

M&L for 75 mm thick plain cement concrete type C-2 , 1:3:6 (40mm graded aggregate) as in plinth protection making surfaces even and fair, complete all as specified and directed.

M&L cement concrete type B-2, 1:2:4 (40 mm graded aggregate) 100 mm thick making fished surfaces even and fair (without using extra cement), complete all as specified and directed.

M&L for 25mm thick plain cement concrete type B-1 , 1:2:4 (20mm graded aggregate) as in sub base in floor, complete all as specified and directed.

M&L for 15mm thick in screed bed or bedding layer of Cement Mortar in 1:4 for laying floor finishes, complete all as specified and directed.

M&L for rendering 10mm thick in Cement Mortar 1:3 on fair faces of brickwork or concrete surfaces to receive wall finishes, complete all as specified and directed.

M&L light shade vitrified tiles 10 mm thick ( square / rectangular) area of each tiles not exceeding 0.36 sqm in as in floor etc. set & jointed in neat cement slurry & pointed in white cement to match, complete all as specified and directed.

All as per item No 56 above but on vertical surface as dado/ skirting.

M&L non-skid joint free ceramic coloured tiles 7 to 8 mm thick ( square / rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm in as in floor etc. set & jointed in neat cement slurry & pointed in white cement to match, complete all as specified and directed.

All as per item No 58 above but on vertical surface as dado/ skirting, complete all as specified and directed.

M&L glazed ceramic coloured tiles in vertical surface 350x250x7mm/450x350xx7mm thick set and jointed in neat cement slurry & pointed in white or coloured cement to match the surfaces as in vertical surfaces, complete all as specified and directed.

M&L 18-20mm thick Granite slab (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including circular cutting,chamfering of edges as required, complete all as specified and directed.

S & F 15mm bore galvanized steel water tubing medium grade with all fittings such as bend, elbow, socket reducer etc fixed to walls and ceilings or laid in floors, complete all as specified and directed.

Refixing old 15mm bore GI tubing medium grade galvanized with fitting fixed in new or old position, complete all as specified and directed.

S&F 20mm bore galvanized steel water tubing medium grade with all fittings such as bend, elbow, socket reducer etc fixed to walls and ceilings or laid in floors, complete all as specified and directed.

Refixing old 20mm bore GI tubing medium grade galvanized with fitting fixed in new or old position, complete all as specified and directed.

S&F 25mm bore galvanized steel water tubing medium grade with all fittings such as bend, elbow, socket reducer etc fixed to walls and ceilings or laid in floors, complete all as specified and directed.

Refixing old 25mm bore GI tubing medium grade galvanized with fitting fixed in new or old position, complete all as specified and directed.

S&F Rotational moulded polyethlene water storage tanks (cylindrical vergical with closed top) capacity in 1000 litres hoisted and fixed in position all as specified in SSR Part -I.

S&F PVC Ball valves, high pressure, with polythene float & steel rod & fly nut complete, screwed for iron pipe or brass ferrule and fixed 25 mm bore pipe, complete all as specified and directed.

S&F, vitreous china pedestal type watre closet, white (excluding flushing cistern and flush pipe) but including connection to trap, and to flushing pipe, anti-syphonage pipe & EWC seat cover etc complete and making good to floor, complete all as specified and directed.

S&F in repair 10 litres capacity PVC low level flushing cistern, white inlet ball valve, float and handle and connection to pipe including bracket, complete all as specified and directed.

S & F in repair vitreous china wash hand basin, white flat back of size 550 mm x 440 mm including brackets and making necessary arrangement for fixing, complete all as specified and directed.

S&F brass chromium plated wall mixer with hot and cold arrangement, long shank suitable for 15 mm bore of pipe of approved quality as approved by EIC.(make- Essco, cat no MQT-5178)

S&F brass chromium plated Basin mixer with hot and cold arrangement, long shank suitable for 15 mm bore of pipe of approved quality as approved by EIC..(make- Essco, cat no SQT-516KN)

S&F in repair PVC cabinet mirror box type of size 355 x 455 mm, complete all as specified and directed. Make-Prayag

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm incl waste pipe, complete all as specified and directed.

S&F stainless steel plate rack 1mm thick of size 750X600x250 mm , fixed on wall surface as per manufacturer's instruction and making good the surfaces, complete all as specified and directed.

S&F 18 mm thick Rajshree Celuka ply or equivalent as approved of grade 1 quality with both side plain white or coloured fixed with stainless steel screwes, solvent cement /adhesive to fabricate kitchen cabinet sides , top and bottom, door, shelf inside the cabinet and drawer including ,drawer chanel, magnetic ballcatch & other all fittings complete all as per manufacturers instructions incl taking out old existing wooden cabinate, complete all as specified and directed.

S&F auto closing hinges 35mm of crank (KH-001) or 8 crank (KH-002) openable at 110 degree of make as approved.

S&F stainless steel handles of 100mm size.

S&F in repairs aluminium anodised Tubular towel rail 20mm dia, D type, 60cm long between flanges, complete all as specified and directed.

S&F in repair chromium plated health faucet for EWC with 1 meter PVC tube and hook, complete all as specified and directed.

S&F grating doom 100mm dia PTMT min weight 25gm fixed in repair, complete all as specified and directed.

S&F grating doom 125mm dia eith waste hole of PTMT (minimum weight 40 gms), complete all as specified and directed.

S&F in repair 100 mm dia outlet PVC (SWR) floor trap plain with steel grating including jointing with solvent cement.

S&F PVC (SWR) pipes 75 mm single socketed in any length with rubber ring joints, fixed to walls, complete all as specified and directed.

S&F 110 mm bore PVC (SWR) pipes single socked in any length with rubber ring joints laid in trenches or in floors, complete all as specified and directed.

S&F, 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in treches or in floors, complete all as specified and directed.

S&F PVC (SWR) bends any radius 110 mm dia.

S&F PVC (SWR) 75 mm bore bends of any radius.

S&F 110mm bore PVC (SWR) reducers.

S&F 75mm bore PVC (SWR) vent cowl.

S&F in repair, 15 mm bore fancy type bib taps, chromium plated cast copper alloy, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed.

S&F 15 mm bore two way long body bib taps, chromium plated cast copper alloy, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed. Make- Esscco cat no TQT 512A

S&F in repairs stop valve/angle cock fancy type of 15 mm dia cast copper alloy chromium plated screwed down, high pressure, with crutch or butter fly handle long shank and cup (concealed type) screwed both ends for iron pipes or for unions, complete all as specified and directed.

S&F PVC connections 15 mm size with PTMT nuts of length 450mm.

S&F chromium plated toilet paper holder with flap of standard size, complete all as specified and directed.

S&F in repairs Glass shelf assembly consisting of 5.5 mm thick sheet glass with CP brackets and CP frame Size 600mm long , complete all as specified and directed.

S&F CP Towel ring, square type including CP screws, complete all as specified and directed. Make : JAQUAR Code. ACN-1121BN

S&F CP Hand Shower with rubit cleaning system, size 100 x 55mm and 130mm long arm including 1.5m long flexible stainless steel hose, complete all as specified and directed. Make : CERA Cat No. CG-F7030101 Rain shower, Cat No. CG-104 shower arm.

S&F in repair brass Chromium plated shower rose 125 mm size with or without swivel joints any size incl fixing of steel pipe or union, complete all as specified and directed.

M&L for providing RCC (1:2:4) type B-1 (concrete cast -in- situ) using 20 mm graded stone aggregate as in llintels upto 1.5m clear span, cills, steps, copings etc, complete all as specified and directed.

M&L for RCC (Nominal Mix) 1:2:4 type B-1 using 20 mm graded stone aggregate as in slab supported on wall, complete all as specified and directed.

Use & waste frame work to sides and soffits of floor or roof slab, chajjas not exc 200 mm thick (Horizontal or slopeing) making fair finished surfaces, complete all as specified and directed.

S&F TMT bars 10mm dia and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to.

S&F TMT bars 6mm to 8mm dia and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to.

S&F TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders binding with the mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality conforming to.

M&L including preparation of new plastered wall surfaces and treating with two coat of oil bound distemper over a coat of primer over one coat of wall care putty, complete all as specified and directed.

M & L including preparation of new plastered wall surfaces and treating with two coat of cement base paint of approved colour, complete all as specified and directed.

Complete removal of existing treatment and applying two coat of oil bound distemper over a coat primer over one coat of wall care putty on old plastered wall surfaces, complete all as specified and directed.

Complete removal of existing treatment and applying two coat of cement base paint of approved colour over and including a coat of cement wash with white cement including preparation of wall surface, complete all as specified and directed.

M&L including preparation of old steel surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint, complete all as specified and directed.

S&F Harrision rails , mild steel of anodised alloy with fixing brackets , stops, rollers etc, complete all as specified and directed.

Surface dressing n.exc 15cm deep getting out in soft/loose soil, complete all as specified and directed.

Surface excavation n.exc 30cm deep and average 15cm deep and getting out in soft/loose soil, complete all as specified and directed.

Rough excavation not exc 1.5m deep and getting out in soft/ loose soil, complete all as specified and directed.

Rough excavation not exc 3.0m deep and getting out in soft/ loose soil, complete all as specified and directed.

M&L for broken bricks hardcore of gauge n exc. 63mm, deposited, spread and levelled in layer n exc. 15cm thick, watered and rammed to a true surface, complete all as specified and directed.

M&L for loose filling with aggregates of gauge 80 to 150 mm in soakage pits, soakage wells, complete all as specified and directed.

M&L for broken stone hardcore of gauge n exc. 63mm, deposited, spread and levelled in layer n exc. 15cm thick, watered and rammed to a true surface, complete all as specified and directed.

M&L for 75mm thick PCC type D-2, 1:4:8 (using 40mm graded stone agg) as in sub base floor surface, complete all as specified and directed.

Providing PCC jallies type B-0, 1:2:4 (12.5mm graded aggregate), 25mm thick, incl all moulding but excluding frame set in CM 1:4, complete all as specified and directed.

M&L for 40mm thick cement concrete type B0 1:2:4 (20 mm graded aggreate) as in damp proof course etc similar work, complete all as specified and directed.

Applying evenly a coat of blown type bitumen at the rate of 1.50 kg per squarw meter and blinding with clean dry sand @ 0.05 cum per Sqm, complete all as specified and directed.

M&L for PCC type C2 1:3:6 (using 40mm graded stone agg) as in surface channels and drains, complete all as specified and directed.

M&L for extra forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra, including forms, moulds, mitred/ stopped end etc, complete all as specified and directed.

S&F pre-painted galvalum alm zink coating GI based corrugated/ semi - corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering fixed with coach screw as per manufacturers instrution, complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering as ridge/cladding to wall, fixed with self tapping screws, complete all as specified and directed.

M&L 15mm thick screed bed or bedding layer of mortar in CM (1:6) for lying floor finishes and surface fair and even, complete all as specified and directed.

M&L 10mm thick rendering as screed bed or bedding layer of mortar in CM (1:4) for lying floor finishes and surface fair and even, complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 200x200X 7mm thick as in vertical surface etc set and jointed in neat cement slurry and pointed in colour cement to match the tiles, complete all as specified and directed.

M & L brick wk with sewer bricks straight or curved on plan exc 6 m mean radius for man-holes/ septic tank/ soakwell etc. in sewer works in CM 1:4, complete all as specified and directed.

M&L 10mm thick rendering on fair faces of brick work/concrete surface in CM (1:6) surface finished fair & even, complete all as specified and directed.

M&L 15mm thick rendering on fair faces of brick work/concrete surface in CM (1:4) with applying water proofing compound (As per manufrature instruction) surface finished fair & evencomplete all as specified and directed. (WPC will be paid saperatelly)

M&L 15mm thick rendering on fair faces of brick work/concrete surface in CM (1:3) with applying water proofing compound (As per manufrature instruction) surface finished fair & even, complete all as specified and directed. (WPC will be paid saperatelly)

Supply only liquid water proofing compound.

M&L Mild steel bars 10mm dia TMT Bars and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with theincluding mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality conforming to.

All as per item No 138 above but 6mm to 8mm dia.

S&F 75mm Butt hinges extrucded aluminium alloy with galvanised mild steel hinge pin anodised and fixed, type C-21.

S&F of 100 mm size aluminium handles cast type anodised.

S&F 100 mm long aluminium anodised barrel tower bolt of extruded section, complete all as specified and directed.

S&F Rotational moulded polyethlene water storage tanks (cylindrical vertical with closed top) Capacity in 500 litres hoisted and fixed in position all as specified in SSR Part I.

S&F Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed for 25 mm bore pipe, complete all as specified and directed.

M&L for 150mm dia reinforced concrete pipes, class NP2, laid and jointed complete with collars.

M&L for concrete bed to drain pipes including packing under, andhaunching against the sides of pipes after they are laid and testedf in cement concrete 1:4:8 type D-2, complete all as specified and directed.

S&F Vitreous China bowl urinal flat back, size of (465mmx355mmx265 mm) white with grating and union for discharge pipe type complete including providing and fixing plugs, complete all as specified and directed.

S&F urinal spreader of PTMT any colour for fixing with 15mm dia pipe, complete all as specified and directed.

S&F in repair vitreous china squating pan 'ORRISA' pattern, size 580X450mm white with integral foot rest complete including connection to trap and to antisyphonage pipe etc complete including making good to floor, complete all as specified and directed.

S&F 110mm PVC (SWR) WC connector bent type.

S&F 10 ltr capacity PVC low level flushing cistern, white inlet ball valve, float and handle and connection to pipe including bracket.

S&F 450mm long, 15mm dia, PVC connection pipe, with brass unions on both ends.

S&F 32 mm dia waste/flush pipe for urinal and WHB, complete all as specified and directed.

Supply only 15 mm pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'hot' or 'cold' with long screwed shanks and fly nuts, screwed for iron pipe, complete all as specified and directed.

S&F Grating doom 100mm dia of PTMT (Minimum weight 25gms), complete all as specified and directed.

M&L 75mm dia PVC(SWR) floor trap, plain with grating including jointing with solvent cement, complete all as specified and directed.

M&L PVC (SWR) gully trap 125/110mm, setting and jointing with solvent cement, complete all as specified and directed.

M&L preparation of new surface of wall and applying three coat of white wash, complete all as specified and directed.

M&L applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of newly steel surfaces of any description over 10cm width or girth not otherwise described, complete all as specified and directed.

S&F for Roof trusses (framed), trusses, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) incl distance pieces, cleats etc complete Fe 410-W(Gde E-250) quality-A.

S&F Flat iron/ angle iron, complete all as specified and directed.

Taking down copper/ aluminium point wiring (light, fan, socket or power) complete with screws, gutties including fixture and fittings such as switches, ceiling rose, pendants, regulators, sockets, light fittings, etc. removing materials to store for taking credit and making good disturbed surfaces of walls, floors, ceiling, etc.to match with existing surfaces, complete all as specified and directed.

M&L for point wiring (concealed) with 1.5 Sqmm PVC insulated FR unseathed multi stranded copper conductor cable 1100 volts confirming to IS-694-1990 and one run continious earth wire with 1.5 Sqmm stranded core PVC insulated unsheathed FR copper conductor confirming to IS-6941990 in PVC Conduit concealed type incl PVC conduit/fitting etc, switch, sockets fixed to modular MS boxes and metal colour plate and all as specified and directed :-

One light point controlled by one switch

One fan/exaust point controlled by one switch

One light point controlled by two 2 way switches, with cables 1.5 sqmm size

One 3 pin socket outlet 5 Amps, on the same board with other switches

One socket 3 pin outlet 5 amp on independent board

One bell/ buzzer point controlled by one push button on the same board with other switches or independent with cable 1.5 sq mm size

All as per item No 163 above but with copper conductor cable for one 3 pin socket outlet 15 amp independent board with cable 2.5 sq mm including one run of 2.5 sq mm copper conductor as earth contnuity wire, complete all as specified and directed.

S&F Modular Switch piano, flush type single pole, one way 5 Amp 1 module, all as specified and directed.

S&F Modular switch 2 way 6A, 1 module, all as specified and directed.

S&F modular white cover plate with frame,2 module. Make : Anckor/Legrand/Havells (Crabtree)

S&F modular white cover plate with frame,3 module. Make : Anckor/Legrand/Havells (Crabtree)

S&F modular white cover plate with frame,4 module. Make : Anckor/Legrand/Havells (Crabtree)

S&F modular white cover plate with frame,6 module. Make : Anckor/Legrand/Havells (Crabtree)

S & F modular white cover plate with frame,12 module. Make : Anckor/Legrand/Havells (Crabtree)

S&F ceiling rose, 3 phase/ PVC/ polycarbonate, isolated body, ac, 230 volts, complete all as specified and directed.

S&F in replacement of flexible wire twin core copper conductor of size 23/ 0.0076 for fans and fluorescent tube light, pendant fittings connection upto 1.50 mtr length, complete all as specified and directed.

S&F in replacement modular type electronic fan regulator, complete all as specified and directed.

S&F modular socket outlet 2 in 1, 3 pin, 5A multipurpose, flush type, complete all as specified and directed.

S&F Modlaru Switch socket outlet 3 pin 5 amp' flush type multipurpose, flush type, complete all as specified and directed.

S&F Switch socket outlet 3 pin, 15 amp, flush type flush type universal, complete all as specified and directed.

S&F Bell push 6A 1 module, flush type, complete all as specified and directed.

S&F bell multi music type, AC, 230 V, single pole, complete all as specified and directed.

M&L in replacement of lamp holder, alongwith 12 watt inverter bulb with 4 hours backup lightfacility PVC/ Polycarbonate type with back plate suitable for batten fitting, complete all as specified and directed.

S&F LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and directed.

Taking down and Refixing only ceiling fan and connecting up with round flexible copper conductor Flame retardant PVC insulated and sheathed 3 core multi stranded of size 0.50 Sq mm from ceiling rose to connector of C / Fan ccomplete all as specified and directed. Note : 1. Cost of Flame retardant PVC insulated unsheathed multi stranded round flexible copper conductor 1100 V grade 3 Core 0.5 Sqmm from ceiling rose to connector of C / Fan is deemed to be included in the rate quoted.

S&F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed.

Taking down sub main wiring of any size from the ceiling, walls etc and incl making good to the disturbed surfaces of wall/ ceiling to match with the existing surface, complete all as specified and directed.

S&F in replacement sub main wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper 1100 V grade conductor, single core cable in surface/ recessed as required drawn in and including PVC conduit with all accessories such as saddles, screws etccomplete all as specified and directed. (a) 2 x 4.0 sq. mm + 1 x 2.5 sq. mm earth wire

S&F in replacement sheet metal enclosure for DB's for using MCB, MCB DB, single pole and neutral 8 ways double door with 200 amps rated bus bar 240 volts and all accessories, complete all as specified and directed.

S&F in replacement of MCB single pole and neutral 32-63 amps, 240 Volts.

S&F in replacement of MCB 6 to 32 amps single pole 240 Volts.

M&L for Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB, complete all as specified and directed.

S&F in replacement of of XLPE insulated heavy duty electric cables with aluminium conductor, 1100 volt grade, cross sectional area 16 Sq mm 4 core, complete all as specified and directed.

Excavation in trenches, not exceeding 1.5 Mtr wide and not exceeding 1.5 Mtr in depth in loose / soft soil and getting out for laying of LT UG cable including levelling bottom surface, complete all as specified and directed.

M&L for sand cushioning in trenches including watering and consolidation as in cable protection complete all as specified all as per SSR Part-I.

M&L for sub class 'B' bricks, laid flat in trenches with width equal to width of the brick for the protection of under ground cable complete all as specified and as specified in SSR Part-I

Returning and filling including spreading, levelling, watering and well ramming in layers not exceeding 25 Cm thick, complete all as specified and directed.

Removing of excavated material to a distance not exceeding 50 Mtrs and depositing where directed at a level not exceeding 1.5 mtr above the starting point, complete all as specified and directed.

M&L for GI tube, light grade, 50mm with all fitting; laid in trenches/with pole, complete all as specified and directed.

S&F exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm with cutting of wall and masonry work, complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode of size 600 x 600 x 6 mm thick, buried directly in ground (earth pit not less than 2.25 mtr below normal ground level) with top edge of earth plate not less than 1.5 mtr below normal ground level,connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, checknuts and washers of galvanised iron or steel including earth work in any type of soil, charcoal, salt filled around the earth plate as shown in electrical plate No. 5 of SSR part I 1991, 20 mm dia watering medium grade 1.50 mtr long GI protection pipe light grade 15 mm dia from earth pit to main board including earth pit in PCC (1:3:6) type C-1 and 40 mm thick RCC cover reinforced with 8 mm dia MS bars @ 100 c/c both ways, funnel etc & testing, complete all as specified and directed.

S&F in replacement post LED top lantern light fitting for 70 Watt SV lamp complete With all accessories, complete all as specified and directed.

S&F LED bldg security light 60 W IP 65.

Supply and install, testing and commissioning 3 phase 4 wire, 50 Hz, 433 Volt ,Indoor door type LT Main distribution panel board 3'x2' double door with front opening made of 1.60 mm MS sheet powder coated fixing on wall complete. With arrangement of three phase cable incomming lower side, fixing of MCCB 63 Amp-01 Nos as incomming , fixing of MCB 6-32 Amp DP-04 Nos and fixing of electronic energy Meter with LCD display-04 Nos including connection with suitable size of cable, complete all as specified and directed.

Material and labour for point wiring (concealed) with 1.5 Sqmm PVC insulated FR unseathed multi stranded copper conductor cable 1100 volts confirming to IS-694-1990 and one run continious earth wire with 1.5 Sqmm stranded core PVC insulated unsheathed FR copper conductor confirming to IS-6941990 in PVC Conduit concealed type incl PVC conduit/fitting etc, modular MS boxes complete all as specified and directed. Make:- Havells/Finolex/Anchor (a) One light/fan/ Exhaust point controlled by one one way switches.

S&F modular white cover plate with frame,8 module. Make : Anckor/Legrand/Havells (Crabtree)

S&F exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers. Make :- Anchor / Legrand Havells.

S&F 1100 volts grade heavy duty PVC insulated aluminium conductor, served with inner sheathing of PVC in service connections suspended by insulating hangers not more than 1 mtr apart including 4mm dia GI suspension wire, one twin core cable of size 6 Sqmm multi -strand, complete all as specified and directed. Make : Finolex

M&L for House service bracket (hook type complete with 3.0m long G.I. pipe 40mm dia Med. grade, two nos 90° bends. M.S. hook and stay or guy, complete all as specified and directed.

S&F 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning, complete all as specified and directed. Make :- Havells /Anchor/Schneider

S&F 25mm bore dia tubes,' medium grade', galvanized, with all fittings; laid in trenches, complete all as specified and directed.

S&F in replacement of Gun metal gate valves, with iron wheel head, screwed both ends for iron pipe and fixed of size 25 mm dia bore, complete all as specified and directed.

S&F exhaust fan 380mm suitable for operation on 230 volt, AC single phase, 50 Hz electric supply system, complete all as specified and directed. Make- Havells/Oriennt /Usha.

S&F switch piano flush button single pole one way 5 amp, complete all as specified and directed.

M & L for making hole in wall for fixing exhaust fan in size 380 mm sweep including grouting nut and bolt with all meterial including making good surface with C M 1:4 complete with meterial, complete all as specified and directed.

S&F louver shutter for exhaust fan 380mm sweep, complete all as specified and directed.

S&F wall fans 400mm suitable for operation on 230 volt, AC single phase, 50 Hz electric supply system, complete all as specified and directed. Make- Havells/Orient /Usha/Bajaj.

S&F switch socket outlet 3 pin and 6 Amps, flush type, 240 volt, complete all as specified and directed.

S&F fans ceiling complete with electronic type regulator and accessories 230 V, 1200 mm sweep BEE 5 star rated.

S&F in repair stop valve 15mm chromium plated screw down, high pressure with crutch or butterfly handle, screwed fboth ends for or iron pipe or for unions and fixed complete all as specified and directed.

S&F LED ceiling light recessed full open 2x2 tile glare free uniform illumination with longer life and less maintenance 36 Watt. Make : Crompton/Philips/Havells/Bajaj/HPL

india trading company

Associated Engineers

Rajeev Ranjan

Excel Enterprises

M/S SWASTIK HI-TECH BUILDERS PVT LTD

M/s Kundu Enterprises

M/S AMOD KUMAR PANDEY