REPAIR/REPLACEMENT OF WOODEN/ALUMINIUM JOINERY AND PARTITIONS AND PVC DOORS AND OTHER CONNECTED B/R WORKS OF OTM ACCN AND MD ACCN OF VARIOUS UNIT AT SHILLONG UNDER GE SHILLONG

Amount

Taking down chowkhat with shutter (without taking off shutter from the frame) and area exc 1.5 sqm but n.exc 4 sqm each including make good and all as specified.

Taking down shutters of any description exc 1.0 sqm but n. exc 2.0 sqm each all as specified

Taking down shutters of any description exc 1.0 Sqm and nexc 2 sqm refixing in same opening complete.

S&F 2nd class hard wood plain, solid, straight chawkhats and frames, wrought, framed, rebated on the solid rounded or chamfered, put together with glue pinned at joints all as specified.

S&F 30mm thick flush shutter solid core construction with block board core and plywood face panels, decorative face veneer with lipping/frame to match on both sides .

S&F 35 mm thick 2nd class hard wood plain framed panneled shutter any number of panels with panel of 9mmB.W.P. commerical play flat on both side with feather edged all as specified and directed

M&L for 35mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats

Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing

5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing.

Taking down shutters of any description but not exc 1 Sqm each all as specified.

M&L 30mm thick 2nd class hard wood factory made glazed and skeleton shutter, open rebated and prepared to receive glass, gauge etc. devided into squares with plain chamfered or rounded, mitred and rebated sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part-I Section-8 clause 8.24(b) complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of wood and wood based materials of any description not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint over a coat of pink primer all as specified and as directed.

Taking down chowkhat with shutter (without taking off shutter from the frame) but n.exc 1.5 sqm each including make good and all as specified.

S&F factory made pre laminated solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with single piece extruded pvc profile both side prelam PVC sheet 'C' channel having a 5mm thick PVC sheet strip of 20mm width stuck inside with solvent cement, forming stiles, and 5mm thick both side prelam single piece extruded pvc profile for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of both side prelam 5mm thick PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading, and jointed together with solvent cement complete all as specified and shown on drawing given in SSR Part II. The width of stiles & rails shall be in proportion to the width of the door shutter as given in SSR Part I.

S&F pre laminated solid PVC Door Frame of size 50mm x 47mm made out of 5mm single side prelam single piece extruded pvc profile and edgs will be painted to match with prelam sheet , PVC sheet are to be reinforced with 19x19mm MS square tube EPDM rubber gasket weather seal shall be provided through out the frame. The profile shall be mitre cut at two corners and joint by insrting 2 nos of 150mm long backets of 15mmx15mm MS square tube inside the 19mmx19mm MS square tube and suitably screwed and fixing in opening as per specification & drawing complete all as specified and directed.

S&F Butt hinges, medium weight, cold rolled mild steel, size of hinges 100mm.

S&F Butt hinges, medium weight, cold rolled mild steel, size of hinges 75mm.

S&F Extruded Aluminium, anodised, bow handles of size 150mm.

S&F Extruded Aluminium, anodised, bow handles of size 100mm.

S&F aluminium anodised barrel bolts and fixed of 200 mm length

S&F aluminium anodised barrel bolts and fixed of 100 mm length

S&F for 4 leversBrass Mortice lock,vertical type,100mm length

S&F for 50mm dia cupboard polished hardwood knobs fixed with screws

S&F Satinless steel Butt hinges, medium weight, cold rolled mild steel, size of hinges 100mm.

S&F Mild steel sliding door bolt, plate type stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate, length of bolt 300mm.

S&F powder coated anodized aluminium frame for doors/windows /ventilators/, partitions with one or more rebates including joining cleats for fixing to existing tiled/concrete floring as required. etc complete all as specified and as directed. (Note : Any damage made to existing flooring with fixing frames shall be made good by contractor without any extra cost and match with existing flooring)

S&F Power coating, anodised door shutters , aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing , handles 2 nos in each door , hinges , anodised aluminium snap beading screws etc complete all as specified

S&F Powder coating anodised window and ventilator shutters side hung/sliding type without sash , aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing , anodised aluminium snap beading screws ,anodised aluminium fittings such as peg stays 150 mm long(1 no) hinges type B-21 100 mm long (2 no) suitable handle (1 no ) complete as specified

M&L double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover,governing pivot made of brass,other parts made of mild steelheavy duty and fixed

S&F Sheet glass, 4.8mm thick ordinary quality, in squares,n exceeding 0.50 sqm in each pane including rubber packing and aluminium beadingcomplete all as specified and directed

S&F Sheet glass, 5.5mm thick ordinary quality, in squares,exceeding 0.50 sqm in each pane including rubber packing and aluminium beadingcomplete all as specified and directed

M&L 12mm thick prelaminated particle board, interior grade prelaminated both side with decorative choice laminations ,fixed with screw etc complete all as specified.

S&F in repair Aluminium extruded section door closer hydraulially regulated, designation No 3, universal type suitable for door shutter of 851 to 1000mm width and of weight of between 61 to 80 kg and fixed all as specified (ISI Marked)

Dismantling of timber scantling 40 sqcm over in section in any position (unframed work).

Ditto in fillets, rails, posts, rafters, purlins etc under 40 sqcm in section unframed work.

M&L 2nd class hard wood in scantling clean sawn timber fixed all as specified.

M&L Preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with Two coats of Creosote

Dismantling boarding any description fixed in any position with nails

M&L for 18/19 mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice laminations and other side balancing white lamination as in kitchen cabinet/cup-board completed all as specified and directed.

M&L 12 mm thick Plywood, grade BWR, type BB, fixed with screws to timber frame work ® Plywood, grade BWP,

M&L 6 mm plywood, grade BWR,type BB, fixed with screws to timber frame work

M&L for 1.5mm decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturers instructions

M& L for 0.90mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions.

M&L french polishing on surfaces of any description,width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats completed all as specified and directed.

Bees-wax polishing on wooden surfaces of any description,width or girth including cleaning and preparing the surface completed all as specified and directed.

M&L 2nd class hard wood plain fillets, square, rectangular or triangular in section, clean sawn secured with nails or brads of sectional area exc. 13 & n. exc. 25 Sqcm complete all as specified and directed.

S&F Continuous (Piano) hinges, brass, width of flaps 30 mm (when open)

S&F Magnet catches for cupboard shutter, brass body and striking plate including letting in all as specified and as directed

S&F Extruded brass handles, 100 mm size, fabricated type, polished all as specified and as directed

S&F in repairs 50mm dia, cupboard polished, hard wood knobs fixed with crews and washer of mild steel, bright finished

Dismantling of wall/ceiling boards (fibre, pulp,insulation, etc.) or insulation boards/ slab/blankets, any thickness including cover fillets.

S&F 15mm bore bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed

S&F in repair Health faucet(ABS Body)mild steel chroumium plated suitable for 15mm dia pipe with 1.25metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S&F PVC 32mm bore waste pipe of make Prayag/Hindaware/parryware

S&F Gl frame work for snapgrid false ceiling comprising of Gl perimeter channnel 0.55 mm thick with Main T- flange of 25 mm and web of 30 mm fixed to surrounding wall angle with flange and web 25 mm each , Cross T with flange 25 mm and web 25 mm fixed to main T, Main T is suspended from soffit @ 1200 mmm c/c using GI wire of 4mm thickness GI frame will be 60 x 60 cm to recieve E-board ceiling complete all as specified and as directed .

M&L for 4mm thick non asbestos fiber cement building boards 600x600 mm prepainted fibre boards ceiling designer/decorative type with different designs as approved by the Engr-in-charge fixed or laid in ceiling timber /GI/ aluminium frame work in ceiling flat or sloping complete all as per manufacturer instruction complete all as specified and directed.

S&F in repairs toilet paper holder with flat recessed type stainless steel complete all as specified and directed.

S&F in repairs Soap dish, any type, fixed to plugs with chromium plated brass screws

S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, overall length of cover plate 140mm complete all as specified and directed.

S&F 300mm long MS Helical door spring Welded to steel /Fixed to wooden door frame including roller and roller plate etc of approved quality complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frame including taking out old wooden beads complete all as specified and directed.

S&F 3 mm thick figured glass, pin head type and glazing with oil putty or wooden beads in squares n.exc 0.5 sqm in each pane complete all as specified and directed.

M&L for 3mm thick sheet glass ordinary quality and glazing with wooden beading in square n exc 0.5 sqm in each pan.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples.

S&F in repairs stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples.

S&F 40mm thick 2nd class hardwood clean sawn boards or planks, width n exc. 20 cm for wooden flooring etc all as specified.

S&F in repairs Soap dish holder of make Jaguar/Marc/Parryware/Prayag

S&F in repairs Toilet roll holder with stainless steel flap of Make Jaguar/Marc/Parryware/Prayag

S&F repairs towel ring sqare shape stainless steel of Make Jaguar/Marc/Parryware/Prayag

S&F in repairs corner glass shelf with bracket of make Jaguar/Marc/Parryware/Prayag

S&F half round PVC rain gutter of dia 180 mm.

Fixing only half round rain gutter (any dia size) with clamps including bolts and nuts.

S&F bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165

M/S U.K ENTERPRISE (BID ID -3354972)

SUNITA DEVI (BID ID -3355089)