Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.8 CrAccepted-AOC HOUSE NO 869 GALI NO 8 GANESH NAGAR BATHINDA DISTT BATHINDA | BATHINDA | BATHINDA | PUNJAB | ₹4.8 Cr Quoted ₹5.3 Cr | L1 | Accepted-AOC low rate |
| 2 | L2₹5.7 CrRejected-AOC 60 ST NO 1 D GTB NAGAR NEAR KK ROAD BYPASS SHRI MUKTSAR SAHIB | ₹5.7 Cr | L2 | Rejected-AOC High |
| Sl No | Description | Qty | Unit | JASKARAN SINGH GILL CONTRACTORS L2 | BHUPESH MITTAL CONTRACTOR L1 |
|---|---|---|---|---|---|
| 1.00 | Excavation by mechanical means (JCB or Hydraulic excavator) in trenches for pipe lines with straight or open cutting in streets or open area including and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation,watering , including the cost of diversion for traffic, crossing over trenches for access to the houses, watching, fencing, etc. and removal of surplus soil out side/inside the town involving lead upto 15 meter complete in all respect. | 80,656.71 | cum | 115 ₹92.8 L | 93 ₹75.0 L |
| 2.00 | Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed
within lead of 30 metres. | 2,784.21 | cum | 259 ₹7.2 L | 210 ₹5.8 L |
| 3.00 | Cement Concrete 1:4:8with
(i) stone ballast 20mm gauge (PCC) mixing by mechanical means. | 210.62 | cum | 4,741 ₹10.0 L | 4,579 ₹9.6 L |
| 4.00 | Reinforced cement concrete M-25 with cement @375/kg per cum hand mixed but excluding steel reinforcement centring and shuttering in foundation and Plinth Mechanical means | 10.16 | cum | 7,019 ₹71,313.04 | 6,543 ₹66,476.88 |
| 5.00 | First class burnt brick work laid in cement sand mortar 1:4 in foundation and plinth | 445.21 | cum | 8,221 ₹36.6 L | 7,315 ₹32.6 L |
| 6.00 | 12.5 mm thick cement plaster 1:4 | 1,403.37 | sqm | 266 ₹3.7 L | 245 ₹3.4 L |
| 7.00 | Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering) | 425.5 | sqm | 307 ₹1.3 L | 267 ₹1.1 L |
| 8.00 | Cold twisted deformed (Ribbed/ Tor Steel Bar) Bars Fe 500 grade as per IS 1786-1985, for R.C.C works, where not including in the complete rate of RCC including bending and placing in postion complete. | 12.77 | qtl | 9,854 ₹1.3 L | 9,213 ₹1.2 L |
| 9.00 | Supply and installation of alfa valve including fittings etc complete in all aspects of 90 mm . | 31 | Each | 649 ₹20,119 | 605 ₹18,755 |
| 10.00 | Supply and installation of alfa valve including fittings etc complete in all aspects of 75 mm . | 124 | Each | 608 ₹75,392 | 562 ₹69,688 |
Updated dates
Tender Value
₹4.5 Cr
EMD Value
₹8.9 L
Closing Date
30 Mar 2026, 11:00 amClosed
Executive Engineer
office of Executive Engineer,Ropar canal and GWD
Estimate for gravitational distribution Network 2 and 3 from OHSR tank 1 to provide surface water to villages abiana kalan ,abiana khurd, nangal , Chonta etc in District Ropar
2026_WR_162525_2
84/22A/2025-26
Open Tender
Civil Works
100 days
Village Abhiana Khurd, kalan, Nangal nurpur bedi
Please refer Tender documents.
2 documents required · 2 mandatory
₹2,000
₹8.9 L
office of Executive Engineer,Ropar canal and GWD
15 May 2026
17 Mar 2026
30 Mar 2026
17 Mar 2026
30 Mar 2026
17 Mar 2026
24 Mar 2026
Excavation by mechanical means (JCB or Hydraulic excavator) in trenches for pipe lines with straight or open cutting in streets or open area including and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation,watering , including the cost of diversion for traffic, crossing over trenches for access to the houses, watching, fencing, etc. and removal of surplus soil out side/inside the town involving lead upto 15 meter complete in all respect.
Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres.
Cement Concrete 1:4:8with (i) stone ballast 20mm gauge (PCC) mixing by mechanical means.
Reinforced cement concrete M-25 with cement @375/kg per cum hand mixed but excluding steel reinforcement centring and shuttering in foundation and Plinth Mechanical means
First class burnt brick work laid in cement sand mortar 1:4 in foundation and plinth
12.5 mm thick cement plaster 1:4
Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering)
Cold twisted deformed (Ribbed/ Tor Steel Bar) Bars Fe 500 grade as per IS 1786-1985, for R.C.C works, where not including in the complete rate of RCC including bending and placing in postion complete.
Supply and installation of alfa valve including fittings etc complete in all aspects of 90 mm .
Supply and installation of alfa valve including fittings etc complete in all aspects of 75 mm .
Providing&fixingC.I/D.I Flangedend, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing, testing&cost of Nut ,Bolt & insertion sheet, all carriage complete (with theapproval of Engineer in charge). Class PN-1.6 as per ISI B. (d) 200mm i/d Sluice Valves flanged
Providing&fixingC.I/D.I Flangedend, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing, testing&cost of Nut ,Bolt & insertion sheet, all carriage complete (with theapproval of Engineer in charge). Class PN-1.6 as per ISI B. (e) 250mm i/d Sluice Valves flanged
Providing&fixingC.I/D.I Flangedend, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing, testing&cost of Nut ,Bolt & insertion sheet, all carriage complete (with theapproval of Engineer in charge). Class PN-1.6 as per ISI 315mm Sluice Valves flanged
Providing&fixingC.I/D.I Flangedend, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing, testing&cost of Nut ,Bolt & insertion sheet, all carriage complete (with theapproval of Engineer in charge). Class PN-1.6 as per ISI B. 355mm Sluice Valves flanged
Providing&fixingC.I/D.I Flangedend, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing, testing&cost of Nut ,Bolt & insertion sheet, all carriage complete (with theapproval of Engineer in charge). Class PN-1.6 as per ISI B. (h) 400mm i/d Sluice Valves flanged
Providing&fixingC.I/D.I Flangedend, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing, testing&cost of Nut ,Bolt & insertion sheet, all carriage complete (with theapproval of Engineer in charge). Class PN-1.6 as per ISI B. (i) 450mm i/d Sluice Valves flanged
Providing&fixingC.I/D.I Flangedend, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing, testing&cost of Nut ,Bolt & insertion sheet all carriage complete (with theapproval of Engineer in charge). Class PN-1.6 as per ISI B. 500mm Sluice Valves flanged
Providing&fixingC.I/D.I Flangedend, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing, testing&cost of Nut ,Bolt & insertion sheet, all carriage complete (with theapproval of Engineer in charge). Class PN-1.6 as per ISI B. 550mm Sluice Valves flanged
Providing & fixing double air valve ISI Markedasper IS-14845 including jointing all carriages complete. (a) C.I Double air valve (Size 65mm)
Providing and laying, jointing, fixing and testing ISI Marked uPVC Pipe Lines as per ISI 4985-2000, including cutting, testing in the ground complete in all respects. (B) upvc pipe 4 kgf / cm2 A) 75MM
Providing and laying, jointing, fixing and testing ISI Marked uPVC Pipe Lines as perISI 4985-2000, including cutting,testing in the ground complete in all respects.B) upvc pipe 2.5 kgf / cm2 A) 90MM
Providing and laying, jointing, fixing and testing ISI Marked uPVC Pipe Lines as perISI 4985-2000, including cutting,testing in the ground complete in all respects.B) upvc pipe 2.5 kgf / cm2 A) 110MM
Providing and laying, jointing, fixing and testing ISI Marked uPVC Pipe Lines as per ISI 4985-2000, including cutting, testing in the ground complete in all respects. B) upvc pipe 2.5 kgf / cm2 A) 160MM
Providing and laying jointing fixing and testing ISI Marked uPVC Pipe Lines as per ISI 4985-2000, including cutting,testing in theground complete in all respects.B) upvc pipe 2.5 kgf / cm2 A) 200MM
Providing and laying, jointing, fixing and testing ISI Marked uPVC Pipe Lines as per ISI 4985-2000, including cutting,testing in the ground complete in all respects. B) upvc pipe 2.5 kgf / cm2 A) 250MM
Providing laying upvc pipe as per ISI-4985(ISI marked with the prior approval of engineer-in-charge ) along the trenches and laying the same in trenches to correct alignment and gradients,cutting,jointing, and testing complete as per specification 1) 125mm @ 2.5 kg/sqcm
Providing laying upvc pipe as per ISI-4985(ISI marked with the prior approval of engineer-in-charge ) along the trenches and laying the same in trenches to correct alignment and gradients,cutting,jointing, and testing complete as per specification 2) 140mm @ 2.5 kg/sqcm
Providing laying upvc pipe as per ISI-4985(ISI marked with the prior approval of engineer-in-charge ) along the trenches and laying the same in trenches to correct alignment and gradients,cutting,jointing, and testing complete as per specification 3) 180mm @ 2.5 kg/sqcm
Providing laying upvc pipe as per ISI-4985(ISI marked with the prior approval of engineer-in-charge ) along the trenches and laying the same in trenches to correct alignment and gradients,cutting,jointing, and testing complete as per specification 4) 225mm @ 2.5 kg/sqcm
Providing laying upvc pipe as per ISI-4985(ISI marked with the prior approval of engineer-in-charge ) along the trenches and laying the same in trenches to correct alignment and gradients,cutting,jointing, and testing complete as per specification 4) 280mm @ 2.5 kg/sqcm
Providing laying hdpe pipe as per ISI-4984(ISI marked with the prior approval of engineer-in-charge ) along the trenches and laying the same in trenches to correct alignment and gradients,cutting,jointing, and testing complete as per specification dia 355mm (2.5 kgf)
Providing laying hdpe pipe as per ISI-4984(ISI marked with the prior approval of engineer-in-charge ) along the trenches and laying the same in trenches to correct alignment and gradients,cutting,jointing, and testing complete as per specification dia 400 mm(2.5 kgf)
Providing laying hdpe pipe as per ISI-4984(ISI marked with the prior approval of engineer-in-charge ) along the trenches and laying the same in trenches to correct alignment and gradients,cutting,jointing, and testing complete as per specificationdia 450 mm(2.5 kgf)
Providing laying hdpe pipe as per ISI-4984(ISI marked with the prior approval of engineer-in-charge ) along the trenches and laying the same in trenches to correct alignment and nts,cutting,jointing, and testing complete as per specification dia 500mm (2.5 kgf)
Providing and laying, jointing, fixing and testing ISI Marked uPVC Pipe Lines as per ISI 4985-2000, including cutting, testing in the ground complete in all respects. B) upvc pipe 4 kgf / cm2 A) 90MM
Providing and laying, jointing, fixing and testing ISI Marked uPVC Pipe Lines as per ISI 4985-2000, including cutting, testing in the ground complete in all respects. B) upvc pipe 4 kgf / cm2 A) 110mm
Providing and laying, jointing, fixing and testing ISI Marked uPVC Pipe Lines as per ISI 4985-2000, including cutting, testing in the ground complete in all respects. B) upvc pipe 4 kgf / cm2 A) 125mm
Providing and laying, jointing, fixing and testing ISI Marked uPVC Pipe Lines as per ISI 4985-2000, including cutting, testing in the ground complete in all respects. B) upvc pipe 4 kgf / cm2 A) 160mm
Providing and laying, jointing, fixing and testing ISI Marked uPVC Pipe Lines as per ISI 4985-2000, including cutting, testing in the ground complete in all respects. B) upvc pipe 4 kgf / cm2 A) 200mm
Providing and laying, jointing, fixing and testing ISI Marked uPVC Pipe Lines as per ISI 4985-2000, including cutting, testing in the ground complete in all respects. B) upvc pipe 4 kgf / cm2 A) 225mm
Providing and laying, jointing, fixing and testing ISI Marked uPVC Pipe Lines as per ISI 4985-2000, including cutting, testing in the ground complete in all respects. B) upvc pipe 4 kgf / cm2 A) 250mm
Providing laying upvc pipe as per ISI-4985(ISI marked with the prior approval of engineer-in-charge ) along the trenches and laying the same in trenches to correct alignment and gradients,cutting,jointing, and testing complete as per specification 2) 140mm @ 4 kg/sqcm
Providing laying upvc pipe as per ISI-4985(ISI marked with the prior approval of engineer-in-charge ) along the trenches and laying the same in trenches to correct alignment and dients,cutting,jointing, and testing complete as per specification 3) 180mm @ 4 kg/sqcm
Providing laying upvc pipe as per ISI-4985(ISI marked with the prior approval of engineer-in-charge ) along the trenches and laying the same in trenches to correct alignment and gradients,cutting,jointing, and testing complete as per specification 5) 280mm @ 4 kg/sqcm
Providing laying hdpe pipe as per ISI-4984(ISI marked with the prior approval of engineer-in-charge ) along the trenches and laying the same in trenches to correct alignment and gradients,cutting,jointing, and testing complete as per specification dia 315 mm (4 kgf)
Providing laying hdpe pipe as per ISI-4984(ISI marked with the prior approval of engineer-in-charge ) along the trenches and laying the same in trenches to correct alignment and gradients,cutting,jointing, and testing complete as per specification dia 355 mm(4 kgf)
Providing laying hdpe pipe as per ISI-4984(ISI marked with the prior approval of engineer-in-charge ) along the trenches and laying the same in trenches to correct alignment and gradients,cutting,jointing, and testing complete as per specification dia 400 mm(4 kgf)
Providing laying hdpe pipe as per ISI-4984(ISI marked with the prior approval of engineer-in-charge ) along the trenches and laying the same in trenches to correct alignment and nts,cutting,jointing, and testing complete as per specification dia 450 mm (4 kgf)
Providing laying hdpe pipe as per ISI-4984(ISI marked with the prior approval of engineer-in-charge ) along the trenches and laying the same in trenches to correct alignment and gradients,cutting,jointing, and testing complete as per specification dia 500mm(4 kgf)
Providing and fixing elbow/bends 90 degree dia 75mm as per IS code 4985 complete in all respect.
Providing and fixing elbow/bends 90 degree dia 90mm as per IS code 4985 complete in all respect.
Providing and fixing elbow/bends 90 degree dia 125mm as per IS code 4985 complete in all respect.
Providing and fixing elbow/bends 90 degree dia 140mm as per IS code 4985 complete in all respect.
Providing and fixing elbow/bends 90 degree dia 160mm as per IS code 4985 complete in all respect.
Providing and fixing elbow/bends 90 degree dia 180mm as per IS code 4985 complete in all respect.
Providing and fixing elbow/bends 90 degree dia 200mm as per IS code 4985 complete in all respect.
Providing and fixing elbow/bends 90 degree dia 225mm as per IS code 4985 complete in all respect.
Providing and fixing elbow/bends 90 degree dia 250mm as per IS code 4985 complete in all respect.
Providing and fixing elbow/bends 90 degree dia 280mm as per IS code 4985 complete in all respect.
Providing and fixing elbow/bends dia 90 degree 315mm as per IS code 4985 complete in all respect.
Providing and fixing elbow/bends 45 degree dia 75mm 6kgf/sqcm as per IS code 4985 complete in all respect.
Providing and fixing elbow/bends 45 degree dia 90mm as per IS code 4985 complete in all respect.
Providing and fixing elbow/bends 45 degree dia 125mm as per IS code 4985 complete in all respect.
Providing and fixing elbow/bends 45 degree dia 140mm as per IS code 4985 complete in all respect.
Providing and fixing elbow/bends 45 degree dia 160mm as per IS code 4985 complete in all respect.
Providing and fixing elbow/bends 45 degree dia 180mm as per IS code 4985 complete in all respect.
Providing and fixing elbow/bends 45 degree dia 200mm as per IS code 4985 complete in all respect.
Providing and fixing elbow/bends 45 degree dia 225mm as per IS code 4985 complete in all respect.
Providing and fixing elbow/bends 45 degree dia 250mm as per IS code 4985 complete in all respect.
Providing and fixing elbow/bends 45 degree dia 280mm as per IS code 4985 complete in all respect.
Providing and fixing elbow/bends 45 degree dia 315mm as per IS code 4985 complete in all respect.
Providing and fixing Equal tee dia 75mm as per IS code 4985 complete in all respect.
Providing and fixing Equal tee dia 90mm 6kgf/sqcm as per IS code 4985 complete in all respect.
Providing and fixing Equal tee dia 125mm as per IS code 4985 complete in all respect.
Providing and fixing Equal tee dia 140mm as per IS code 4985 complete in all respect.
Providing and fixing Equal tee dia 160mm 6kgf/sqcmas per IS code 4985 complete in all respect.
Providing and fixing Equal tee dia 180mm as per IS code 4985 complete in all respect.
Providing and fixing Equal tee dia 200mm as per IS code 4985 complete in all respect.
Providing and fixing Equal tee dia 225mm as per IS code 4985 complete in all respect.
Providing and fixing Equal tee dia 250mm6kgf/sqcm as per IS code 4985 complete in all respect.
Providing and fixing Equal tee dia 280mm as per IS code 4985 complete in all respect.
Providing and fixing Equal tee dia 315mm as per IS code 4984 complete in all respect.
Providing and fixing Equal tee dia 355mm as per IS code 4984 complete in all respect.
Providing and fixing Equal tee dia 400mm as per IS code 4984 complete in all respect.
Providing and fixing Unequal tee dia 200*160 mm as per IS code 4985 complete in all respect.
Providing and fixing Unequal tee dia 200*125 mm as per IS code 4985 complete in all respect.
Providing and fixing Unequal tee dia 200*90 mm as per IS code 4985 complete in all respect.
Providing and fixing Unequal tee dia 160*125 mm as per IS code 4985 complete in all respect.
Providing and fixing Unequal tee dia 160*90 mm as per IS code 4985 complete in all respect.
Providing and fixing Reducer Size 90mm to 75mm per IS code 4985 complete in all respect.
Providing and fixing Reducer Size 140mm to 125 mm as per IS code 4985 complete in all respect.
Providing and fixing Reducer Size 140mm to 160 mm as per IS code 4985 complete in all respect.
Providing and fixing Reducer Size 200mm to 160 mm as per IS code 4985 complete in all respect.
Providing and fixing Reducer Size 225mm to 200 mm as per IS code 4985 complete in all respect.
Providing and fixing Reducer Size 250 mm to 200 mm as per IS code 4985 complete in all respect.
Providing and fixing Reducer Size 250mm to 225 mm as per IS code 4985 complete in all respect.
Providing and fixing Reducer Size 315mm to 225 mm as per IS code 4985 complete in all respect.
Providing and fixing Reducer Size 315mm to 250 mm as per IS code 4985 complete in all respect.
Providing and fixing Reducer Size 355mm to 250mm as per IS code 4985 complete in all respect.
Providing and fixing Reducer Size 355mm to 315 mm as per IS code 4984 complete in all respect.
Providing and fixing Reducer Size 400mm to 355 mm as per IS code 4984 complete in all respect.
Providing ,and fixing cast iron adaptor of 6kg/cm2 pressure including testing,comisioning ,cpmplete in all respect to the satisfaction of engineer encharge. Dia 550
Providing ,and fixing cast iron adaptor of 6kg/cm2 pressure including testing,comisioning ,cpmplete in all respect to the satisfaction of engineer encharge. Dia 500
Providing ,and fixing cast iron adaptor of 6kg/cm2 pressure including testing,comisioning ,cpmplete in all respect to the satisfaction of engineer encharge. dia 450 mm
Providing ,and fixing cast iron adaptor of 6kg/cm2 pressure including testing,comisioning ,cpmplete in all respect to the satisfaction of engineer encharge. 400 mm
Providing ,and fixing cast iron adaptor of 6kg/cm2 pressure including testing,comisioning ,cpmplete in all respect to the satisfaction of engineer encharge. Dia 355 mm
Providing ,and fixing cast iron adaptor of 6kg/cm2 pressure including testing,comisioning ,cpmplete in all respect to the satisfaction of engineer encharge. Dia 315 mm
Providing ,and fixing cast iron adaptor of 6kg/cm2 pressure including testing,comisioning ,cpmplete in all respect to the satisfaction of engineer encharge. Dia 250 mm
Providing ,and fixing cast iron adaptor of 6kg/cm2 pressure including testing,comisioning ,cpmplete in all respect to the satisfaction of engineer encharge. Dia 200 mm
Providing and fixing MS Service saddle of dia 75mm*50mm including testing ,comissioning complete in all respect to the satisfaction of Engineer enchage.
Providing and fixing MS Service saddle of dia 90mm*50mm including testing ,comissioning complete in all respect to the satisfaction of Engineer enchage.
Providing and fixing MS Service saddle of dia 110mm*50mm including testing ,comissioning complete in all respect to the satisfaction of Engineer enchage.
Providing and fixing MS Service saddle of dia 125mm*50mm including testing ,comissioning complete in all respect to the satisfaction of Engineer enchage.
Providing and fixing MS Service saddle of dia 140mm*50mm including testing ,comissioning complete in all respect to the satisfaction of Engineer enchage.
Providing and fixing MS Service saddle of dia 160mm*50mm including testing ,comissioning complete in all respect to the satisfaction of Engineer enchage.
Providing and fixing MS Service saddle of dia 180mm*50mm including testing ,comissioning complete in all respect to the satisfaction of Engineer enchage.
Providing and fixing MS Service saddle of dia 200mm*50mm including testing ,comissioning complete in all respect to the satisfaction of Engineer enchage.
Providing and fixing MS Service saddle of dia 225mm*50mm including testing ,comissioning complete in all respect to the satisfaction of Engineer enchage.
Providing and fixing MS Service saddle of dia 280mm*50mm including testing ,comissioning complete in all respect to the satisfaction of Engineer enchage.
Providing and fixing MS Service saddle of dia 355mm*50mm including testing ,comissioning complete in all respect to the satisfaction of Engineer enchage.
Providing and fixing MS Service saddle of dia 400mm*50mm including testing ,comissioning complete in all respect to the satisfaction of Engineer enchage.
Providing, laying, jointing, fixing and testing ISIMarkeduPVCPipewithG.I. specialsas per ISI-4985, includingcost of G.I. specials such as tees, bends, sockets, elbows etc. testing inside building complete. uPVC Pipe 6 Kgf/cm2 50 mm dia
Providing and fixing Reducer Size 65to 50 mm as per IS code 4984 complete in all respect.
Any Other Items
Please Enable Macros to View BoQ information
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 2.09 MB
BOQ_331945.xls
BOQ • 0.29 MB
retender1of84.pdf
Tender Documents • 0.12 MB
cltrcess.pdf
Tender Documents • 0.43 MB
gstletter.pdf
Tender Documents • 0.32 MB
Download all tender documents and submit your bid