Loading
Loading…
Loading…
Tender Value
₹3.1 Cr
EMD Value
₹6.1 L
Closing Date
5 Jun 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
WORKS
14 conditions · 3 needing a document upload
Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V=Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Technical Eligibility Criteria: Given in Special Condition of Contract. (a)The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, o r (iii) One similar work each costing not less than the amount equal to60% of advertised value of the tender. (b)(i) In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note for b(i): Separate completed works of minimum required values for each component shall also be considered for fulfillment of technical eligibility criteria for different components. (b) (ii) In such cases, what constitutes a component in a composite work shall be clearly predefined with estimated tender cost of it, as part of the tender documents without any ambiguity. (iii) To evaluate the technical eligibility of tenderer, only components of work as stipulated in tender documents for evaluation of technical eligibility, shall be considered. The scope of work covered in other remaining components shall be either executed by tenderer himself if he has work experience as mentioned in clause 7 of the Standard General Conditions of Contractor through subcontractor fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract or jointly i.e., partly himself and remaining through subcontractor, with prior approval of Chief Engineer in writing. However, if required in tender documents by way of Special Conditions, a formal agreement duly notarised, legally enforceable in the court of law, shall be executed by the main contractor with the subcontractor for the component(s) of work proposed to be executed by the subcontractor(s), and shall be submitted along with the offer for considering subletting of that scope of work towards fulfilment of technical eligibility. Such subcontractor must fulfill technical eligibility criteria as follows: The subcontractor shall have successfully completed at least one work similar to work proposed for subcontract, costing not less than 35% value of work to be subletted, in last 5 years, ending last day of month previous to the one in which tender is invited through a works contract. Note: for subletting of work costing up to Rs 50 lakh, no previous work experience of subcontractor shall be asked for by the Railway.
Definition of similar nature of work is: "Satisfactory execution of any electrical work related to HT/LT installation".
11 conditions · 1 needing a document upload
Please submit bank details of the firm / individual/ JV / partnership etc. i.e.Name of the Bank along with Bank Branch Code, Account Number, IFSC Code, PAN Number and other necessary & relevant documents.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
It is the responsibility of the tenderer to see corrigendum, if any, to tender notice up to the date of tender opening. IRGCC-2022 (works matter) is for reference only. Any correction issued by competent authority up to date of opening will be applicable. Tenderer should quote accordingly.
The work will be executed under supervision of Railway Engineer in-charge or his authorized representative at site.
The schedule of quantity is only approximate and may vary as per site condition. Any items may be added or deleted as directed by Engineer-in-charge to complete the work in all respect.
Contractor will issue identity cards to all his supervisors/laborers working at site as per Proforma given by Railway.
General Electrification work and other Electrical item as required in Bhadan SWS Buidling, Bore well in TSS/SP/SSP and Replacement of Wiring and Lights in DY.CEE/PU/CNB office.
DyCEE-PU-CNB-26-27-T-01
DyCEE-PU-CNB-26-27-T-01
Open
Works - General
12 Months
Prayagraj, Uttar Pradesh
₹0
₹6.1 L
5 Jun 2026
14 May 2026
22 May 2026
61 items across 2 schedules · ₹3,05,44,190 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Supply, Erection, testing, connecting and commissioning of energy efficient luminaries complete with all accessories of capacity 18/20 watt, 4 feet length, T8 LED lamps with suitable current control driver circuit , suitable for surface and connecting with PVC copper flexible wire | Numbers | 300.00 | 481 | 1,44,300 |
| 2 | Supply, Erection, Testing and Commissioning & fixing BLDC Electric Ceiling Fan,1200 mm sweep,along with minimum air delivary 220 cu.meter/min,5 star rating complete with down rod asper suitable length, electronoic regulator/remote,Fan hook with flexible copper cable with PVC pipe. | Numbers | 50.00 | 3,429 | 1,71,450 |
| 3 | Supply , erecting , testing & commissioning of exhaust fan 380 mm sweep , 1400 RPM , four blade, suitable to work on 230V AC supply .It should be fixed on wall with reg bolt, nut washer etc. | Numbers | 10.00 | 3,280 | 32,800 |
| 4 | Supply of materials & making wiring of various points such as FT fittings/ceiling fans/ordinary light point etc with 2.5 sqmm (FRLS/FRLSH) PVC insulated multistranded copper conductor cable single core conforming to IS : 694 orlatest version on surface PVC casing capping channel heavy duty 2mm thickness double locking / in recessed PVC conduit pipe heavy duty 2 mm thickness ISI mark ( As per site requirement ) with Bakelite batten holder/angular holder / ceiling rose ,5A flush type switch/Modular switch , white phenolic laminated sheet cover on front of recessed MS box or suitable size or PVC box / modular box for surface system with brass screws, cup washers etc including earth continuity copper wire of 1.5sqmm PVC insulated copper wire complete ( Note :- The wire from SDB to switch board shall be of 04 sq.mm PVC insulated copper wire. & In recessed type wiring system after wall/surface excavation, filling should be with same material in all respect required as per site .) (Also inclusive Removal of existing wiring if required ) | Numbers | 700.00 | 643 | 4,50,100 |
| 5 | Supply of materials & makingwiring point of 6 pin combinedpower point 15A/5A withwiring by 4 sqmm PVCinsulated multistrandedcopper conductor cable (FRLS/FRLSH) single coreconforming to IS : 694 ORlatest version on surface PVCcasing capping channel heavyduty / in recessed PVC conduitpipe heavy duty (ISI mark),with 15 A flush type switch/modular switch, 16 Amps MCBSP , white phenolic laminatedsheet cover on front ofrecessed MS box or Modularbox/PVC box of suitable sizewith brass screws, cupwashers etc including earthcontinuity copper wire of1.5sqmm PVC insulatedcopper wire complete. (Alsoinclusive Removal of existingpoint if required ) | Numbers | 100.00 | 835 | 83,500 |
| 6 | Supply, erection, Testing & Commissioning of sub main consisting of 2x4 Sq. mm (P & N) PVC insulated and sheathed copper wire(FRLS/FRLSH) multistranded single core 1.1 KV grade along with 1.5 Sq. mm PVC insulated copper wire 1.1 KV grade for earthing.(Quantity 1 Mtr. Equal to 02 Nos., wire of 4 Sq.mm of 01 Mtr. each. and 01 No. earth wire 1.5 Sq. mm. of 01 M) (No cable joint is permitted inside the MS conduit pipe cable | Metre | 1000.00 | 62 | 62,000 |
| 7 | Supply, erection, testing and commissioning of sub main of 2x6 Sq.mm PVC insulated and sheathed copper wire single core (FRLS/FRLSH), multi strands,1100 volts grade, continues PVC insulated sheathed copper earth wire of 1.5 sqmm, through PVC heavy duty conduit pipe/PVC Channel complete with all other accessories required as persite ( Also inclusive Removal of existing) | Metre | 500.00 | 91 | 45,500 |
| 8 | Supply, of 2x10 sq. mm PVC insulated sheathed multistranded copper cable single core (FRLS/FRLSH)1100 v grade as per IS : 694 (latest ) for sub mains within PVC conduit pipe heavy duty not less than 25mm dia. in recessed /surface of the wall with earth continuity PVC copper wire(FRLS/FRLSH) including , erection testing and commissioning | Metre | 500.00 | 136 | 68,000 |
| 9 | Supply , erection, testing and commissioning of metal clade SDB with 12way DB complete with 1x63 Amp MCB isolator 4 pole . & 4x20A MCB SP ,6x10 amp MCB SP & 01 No. RCCB of 63 Amps with all other accessories required as per site. complete with all other accessories as per site requirement. | Numbers | 10.00 | 6,465 | 64,650 |
| 10 | Supply & erection of pipe earth electrode of 50 mm dia. 3m long, GI pipe Class B conforming to IS :1239 latest complete with earth box including connection from earth electrode to MDB/SDB/poles /with 8 SWG GI wire | Numbers | 50.00 | 2,432 | 1,21,600 |
| 11 | Supply & recessing/fixing on surface 6 SWG GI wire for loop earthing as required as per technical specification & conformity to IS 5613/PtI/section I&II/1985(latest version). | Metre | 50.00 | 6 | 300 |
| 12 | Supply,testing,fixing & connecting & commissioning of pressure die cast aluminimum housing LED Street light luminaries with IP 66 with mounting bracket and complete with all accessories with LED lamp 60 Watt, similar to Bajaj model no. BRTFG 60W LED including MS clamps and wiring with flexible PVC pipe as required make Philips, Bajaj, Crompton Greaves or similar. | Numbers | 50.00 | 3,498 | 1,74,900 |
| 13 | Laying / cleating of HT/LT cable 03/04 core on wall with all accessories and refilling of cable trench (as per IE Rule) after laying of cable . (Cable will be supplied by the Rly free of cost at consignee depot | Metre | 800.00 | 38 | 30,400 |
| 14 | Supply, Erection, Testing and commissioning of MS/PVC conduit pipe 25mm dia and 1.6mm thick, recessed in the wall and through the wall by making hole and replastering the same in original condition complete with Tee, elbow, junction box, sadle & Other accessories for sub main wiring. (Item Directory - Not Applicable) | Metre | 250.00 | 42 | 10,500 |
| 15 | Supply, erection, testing & commissioning of Iron clad socket 20 Amp. with SPN MCB 32Amp. & metal clad plug top 20 Amp. as per Tech. Spec fn. to IS 732/1989 | Numbers | 10.00 | 962 | 9,620 |
| 16 | LT. Distribution board comprising with MCCB 4 pole 200 Amp 35 KA = 1 no as incoming. Out going MCB SPN C series10 KA 32 Amp =15 nos. with voltmeter, Ammeter and copper bus bar 40 mmx 5 mm complete. | Numbers | 5.00 | 96,670 | 4,83,350 |
| 17 | Supply, Erection, Testing and Commissioning of following Modular Type switch 10 A (1- way)complete in all respect. | Numbers | 100.00 | 68 | 6,800 |
| 18 | Supply, Erection, Testing and Commissioning of following Modular type Plug socket outlet 2/3 Pin 10A complete in all respect | Numbers | 50.00 | 112 | 5,600 |
| 19 | Supply, Erection, Testing and Commissioning of following Modular Type switch 20 A (1- way)complete in all respect. | Numbers | 100.00 | 138 | 13,800 |
| 20 | Supply, Erection, Testing and Commissioning of following Modular type Plug socket outlet 5/3 Pin 20A complete in all respect. | Numbers | 50.00 | 160 | 8,000 |
| 21 | Supply, Erection, Testing and Commissioning of following Modular type step type Electronic Fan Regulator complete in all respect. | Numbers | 20.00 | 217 | 4,340 |
| 22 | Supply and Erection of Modular type switch blanking set to fill the blank space White finished mounting cover plate complete in all respect | Numbers | 50.00 | 8 | 400 |
| 23 | Supply and Erection of white finish single mounting cover plate with base frame suitable 3 module suitable for mounting of Modular type piano switches/ plug Socket, fan regulator and connection to wiring. | Numbers | 20.00 | 72 | 1,440 |
| 24 | Supply and Erection of white finish single mounting cover plate with base frame suitable 8 module suitable for mounting of Modular type piano switches/ plug Socket, fan regulator and connection to wiring. | Numbers | 50.00 | 153 | 7,650 |
| 25 | Supply and Erection of white finish single mounting cover plate with base frame suitable 12 module suitable for mounting of Modular type pianos witches/ plug Socket, fan regulator and connection to wiring. | Numbers | 50.00 | 220 | 11,000 |
| 26 | Supply and Erection of Modular Metal boxesconcealed Boards suitable for mounting of 3 modulewhite finish single mounting cover plate with Frameand Modular type piano switches/ plug Socket, fanregulators. Metal board boxes are to be concealed inwall | Numbers | 20.00 | 47 | 940 |
| 27 | Supply and Erection of Modular Metal boxes concealed Boards suitable for mounting of 8 module white finish single mounting cover plate with Frame and Modular type piano switches/ plug Socket, fan regulators. Metal board boxes are to be concealed inwall. | Numbers | 50.00 | 83 | 4,150 |
| 28 | Supply and Erection of Modular Metal boxesconcealed Boards suitable for mounting of 12module white finish single mounting cover platewith Frame and Modular type piano switches/ plugSocket, fan regulators. Metal board boxes are to beconcealed in wall. | Numbers | 50.00 | 134 | 6,700 |
| 29 | Supply, erection, testing & commissioning of (36-42)watt, 2'x2' LED panel light &fittings complete with required connecting wire and all other fixing accessories required asper site. | Numbers | 20.00 | 3,432 | 68,640 |
| 30 | Transportation of less/heavy material and man power including supply & running of one MUV to the sites of work as per requirement &direction of site in charge .The rates includes all the taxes, license fee, Road permit,driver wages,fuel,repair & maintenance costetc.Complete in all respet. | Kilometre | 12000.00 | 37 | 4,44,000 |
| 31 | Supply of MCB/MCB Isolator single pole /double pole /tripple pole /Four pole of following rating in MDB/SDB Specified above completed with connection testing and commissioning,:-MCB single pole 06-32A | Numbers | 200.00 | 204 | 40,800 |
| 32 | Supply of MCB/MCB Isolator single pole /double pole /tripple pole /Four pole of following rating in MDB/SDB Specified above completed with connection testing and commissioning,:-MCB Isolators double pole 40/25A | Numbers | 25.00 | 459 | 11,475 |
| 33 | Supply, installation &commissioning of 12.5 mtr motorized high mast with accessories | Numbers | 50.00 | 1,99,857 | 99,92,850 |
| 34 | Supply, installation & commissioning of foundation bolts including making foundation for high mast complete .( as per specification attached in tender document ) | Numbers | 50.00 | 31,309 | 15,65,450 |
| 35 | Supply, installation, testing and commissioning of twin do me aviation obstruction red light with two nos. incandescent LED lamp of 9 watt . | Numbers | 50.00 | 2,705 | 1,35,250 |
| 36 | Supply, installation, testing and commissioning of floor mounted outdoor feeder post for high mast | Numbers | 50.00 | 26,847 | 13,42,350 |
| 37 | Supply, fixing, testing and commissioning of digital timer24 hrs/7days 16(6) amp with 2(CO) changeover switching with multi programming to switch ON/OFF lights at pre set time . | Numbers | 50.00 | 2,602 | 1,30,100 |
| 38 | Supply, fixing, installation &commissioning of weatherproof LED floodlight luminaire complete 150watt, IP ratings 65 system efficiency (Im/W)100, color temp (K) 5700, CRI70, Housing LM6 high pressure die cast aluminium, cover glass mounting wall/bracket,THD0.95, operating voltage140- 270 V AC 50 Hz . | Numbers | 600.00 | 7,936 | 47,61,600 |
| 39 | Supply and erection of Octagonal galvanized steel pole 6 meters with base plate 220x220x12 mm, top 70 mm and bottom 130mm of 3mm thick sheet suitable for maximum wind speed upto 160 km/Hr.including foundation bolt and foundation with M 20grade RCC and FE 415 grade reinforcement(450x450x800 cm deep) (foundation should be asper design approved by pole manufacture) | Numbers | 50.00 | 13,481 | 6,74,050 |
| 40 | Supply and erection of factory fabricated hot dipped galvanised bracket 1500 mm long to hold street type fittings -Single arm type. | Numbers | 50.00 | 1,856 | 92,800 |
| 41 | "Supply,fixing,testing,connecting and commissioningof Philips Bollard Garden Light Model Pylon 9 Watt ofDimension 85 x 85 x 650 mm or similar completewith lamp & with all accessories including make-Philips, Bajaj or Crompton Greaves or similar withtwisted twin flexible cord of minimum size 16/0.2mm copper conductor through flexible pipe as perrelevant technical specification. " | Numbers | 50.00 | 7,440 | 3,72,000 |
| 42 | Supply , Erection, testing and commission of1*60 Watt street light LED with fittingspressure die cast aluminum housing,reflectorand enclosed with toghened glass IP65.complete with copper connection wire and all other fixing accessoriesas per site requirement(For building &Approach road) | Numbers | 50.00 | 3,800 | 1,90,000 |
| 43 | "Design, Fabrication,supply,installation, testing and commissioning of Glow Signboard Acrylic sheet , both sided2 mm acrylicsheet with vinylletters, covered with 2 mmunbreakable transparent sheetwith rectengular box .Boxmade by Aluminum angle of 20SWG with provision of 0.5 inchbidding of 22 SWG and LEDmodule light with adaptersuitable for LED light for input110/220 voltsAC supply andbox shall be made available forproper mounting arrangementon thewall/ceiling. Note:- Thebox shallbe made suitablearrangement for easymaintenance in future." | Square Foot | 400.00 | 1,765 | 7,06,000 |
| 44 | Aquaguard Reverse Osmosis based Water Treatment System above 50 LPH Capacity Above100 LPH and upto 250 LPH Storage Tank (Inclusive in the scope of Supply) Yes As per"Construction of Self Contained Water Cooler" Brand: Aquaguard (Detailed Description/Specification as per Product # 1 of GeM Contract No. GEMC- 511687706701381 dt.02/02/2026) | Numbers | 3.00 | 1,20,900 | 3,62,700 |
| 45 | Miscellaneous items not covered in any of the schedule for GPS | Lumpsum | 1.00 | 6,00,000 | 6,00,000 |
| 46 | Supply, Erection, testing and commissioning of Reflux valve suitable for above pump set complete with all other accessories required asper site | Numbers | 31.00 | 3,270 | 1,01,370 |
| 47 | Supply, installation, testing &commissioning of submersible pump starter panel in powder coated MS sheet enclosure with PU gasket suitable for above submersible pump motor. The panel should have star delta starter, MCB, ammeter &voltmeter with selector switch, ON/OFF & all trip indications. It should have protection against phase failure, phase imbalance ,phase reversal, short circuit &Dry run etc.(upto 5HP pump) | Numbers | 31.00 | 8,154 | 2,52,774 |
| 48 | "Supply and fixing of GI pipe class 'B' as perIS:1239 Pt I latest of size 50 mm dia. with allfixing accessories for fixing of above pump setwith seam less coupling with locking devices ,screwed both side only, or complete with MSround flange , rubber gasket , of not less than5mm thick , with nut bolt, spring washer etc.including connection to Rly's delivery pipe line. Each length of pipe should be 3 mtr. approx." | Metre | 1500.00 | 287 | 4,30,500 |
| 49 | Supply, Erection, Testing and Commissioning of 2.5 Sq. mm, Water proof, Flat Submersible Copper Cable suitable for above Pump | Metre | 1000.00 | 86 | 86,000 |
| 50 | Supply, Erection, Testing and commissioning of Open well submersible pump set 02 HP - Single Phase Head range 9-21 M, Discharge Range -475-130(LPM) | Numbers | 27.00 | 17,413 | 4,70,151 |
| 51 | Supply, testing and commissioning of Occupancy sensors | Numbers | 10.00 | 9,736 | 97,360 |
| 52 | Digital Two AC Timer for window/split AC for 2.0TR/3.0TR each(DIGITAL DISPLAY LCD MODEL) LCDModel latest intelligent Microcontroller basedTechnology (3 AC TIMER) program-1 hr to 24 hrswith 30 amps Heavy Duty 2relay output for Two ACAuto/Manual facility for Three phase/single phase HIWALL ORCASSETE TYPE OR DUCTABLE TYPE AC,Dynamic/Saitech System/Om Energy Savers /BELLNutronics Make. | Numbers | 5.00 | 4,070 | 20,350 |
| 53 | Supply ,installation ,testing & commissioning of copper pipe with insulation for cooling and condensing unit. | Metre | 50.00 | 1,800 | 90,000 |
| 54 | Supply, installation, testing & commissioning of Drain pipe | Foot | 50.00 | 164 | 8,200 |
| 55 | Fixing and connecting Split AC 2 Ton with 10 feet (3Mtr.) extra connecting kit (Copper Pipe, Drain Pipe)and wall excavation and filling with POP in all respect required as per site. | Numbers | 10.00 | 3,996 | 39,960 |
| 56 | Supply, erection & Testing Profile Strip light (5mtr. & 240 LED) including driver | Numbers | 20.00 | 1,500 | 30,000 |
| 57 | Supply, replacement, fixing, testing, connecting and commissioning of energy efficient luminaries complete with all accessories of capacity 2x18/20watt, 4 feet length, T8 LED lamps with sutablecurrent control driver circuit , suitable for surface/recessed mounting. LED Luminaries:- (1) Acomplete LED lighting unit consisting of a lightsource and driver together with parts of distributelight,to position and protect the light source,and toconnect the light source to a branch circuit.The lightsource itself may be an LED array and LED module,or an LED lamp. (2):-Supplied LED luminaries shallconfirm to IS:16101(2012) IS :16106(2012) .LightSource (LED) in the Luminaries should be of make:-(1):-NICHIA/ CREE/OSRAM/ SEOUL/PHILIPS/LUMILEDS /LEDNIUM. (2):-LEDs to IS:16105(2012). IS:16108(2012), IEC:62471.1.Inputoperating voltage :-105-295 V AC. 2:-NormalVoltage- 220V AC.3.Driver type: constant currentdriver with short circuit protection(For tube light).4.Control of distribution:-Full cut off. 5.Drivecomponent :Industrial grade only .6.Efficiency ofdriver electronic: > 85% (For tube light).7.Colourtemperature:5000- 6500K(For tube light). 8.Colourrendering index(CRI):>75(For tube light). 9.Ingressprotection :IP-20. 10.Lumen output: >100lumens/[email protected] drive current(For tubelight). 11.Power factor:- >0.90(For tube light).12.Total hormonics distrotion(THD):- <20% (Fortube light). 13. Lamp cover :Acrylic cover whichdoes not result in loss of lumens. 14.Finishing:Power coated /Anodized. 15.Secondryoptics:poly corbonate reflector/ poly carbonate lens.16. Construction of housing: extrudedaluminum/CRCA/ Pressure die cast aluminum.17.Mounting :Suitable for surfacemounting/recessed mounting. 18.Certificate: Firmto submit LM80(In respect of LED used) & LM79 (Inrespect of luminare used) test certificate fromNational/ International accredited Laboratory andOEM certificate for complience of BIS/IEC.19.Warranty:Firm to submit warranty certificate forfive year along with the supply.All fittings shall befitted as surface mounting/recessed mounting withtwisted twin flexible cord of minimum size 16/0.2mm copper conductor as per relevant technicalspecification. Materials prameters must remainunchanged during entire warranty period. 2x18/20watt" | Numbers | 50.00 | 733 | 36,650 |
| 58 | Supply erection, testing & commissioning ofbasic Earthing Kit 1set as per RDSO spec. NoRDSO/PE/SPEC /PS/0109(REV.0)- 2008,Amendment '1' or latest specification. Make: Any vendor complying spec. (Maintenance free) | Set | 60.00 | 13,412 | 8,04,720 |
| Schedule total | ₹2,59,81,890 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
GCCACS11_compressed.pdf
ATTACHMENT
ExplanatorynotesofGPST-01.pdf
ATTACHMENT
PCECircularforFoundationworksnearTrack.pdf
ATTACHMENT
GCCApril2022.pdf
ATTACHMENT
CorrectionSlip1-10.pdf
ATTACHMENT
System of verification of credentials
ATTACHMENT
ContractorMBGuidelines.pdf
ATTACHMENT
2023_09_05RBCE_CE-I-CTSystemofVerificationofTendererCredentials.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .