Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹13.5 LAccepted-AOC | ₹13.5 L | L1 | Accepted-AOC THE LOWEST TENDERER |
| 2 | L2₹16.6 L+₹3.1 L (23.1%)Rejected-Finance SHOP NO 18 1ST FLOOR NORTH LAND BUILDING SECTOR NO 1 BACK SIDE OF BANK OF MAHARASHTRA INDRAYANI NAGAR BHOSARI PUNE 411039 | PUNE | MAHARASHTRA | 411039 | ₹16.6 L+₹3.1 L (23.1%) | L2 | Rejected-Finance NOT THE LOWEST TENDERER. |
| 3 | L3₹16.9 L+₹3.4 L (25.1%)Rejected-Finance | ₹16.9 L+₹3.4 L (25.1%) | L3 | Rejected-Finance NOT THE LOWEST TENDERER. |
| 4 | L4₹17.2 L+₹3.7 L (27.2%)Rejected-Finance SR NO 281 3 7 ANAND NAGAR NEAR DHANORI JAKAT NAKA LOHEGAON PUNE 411047 | PUNE | PUNE | MAHARASHTRA | 411047 | ₹17.2 L+₹3.7 L (27.2%) | L4 | Rejected-Finance NOT THE LOWEST TENDERER. |
| 5 | L5₹18.9 L+₹5.4 L (40.3%)Rejected-Finance A 63 ELDECO COUNTY PHASE II RAJGARH JHANSI U P 284135 | JHANSI | JHANSI | UTTAR PRADESH | 284135 | ₹18.9 L+₹5.4 L (40.3%) | L5 | Rejected-Finance NOT THE LOWEST TENDERER. |
| Sl No | Description | Qty | Unit | M/S SUGAM CONSTRUCTION L1 | JAGPREET SINGH L6 | Mayur Haridas Kumbhar L12 | S V CONSTRUCTION L3 | Rohit Enterprises L5 | RK ENTERPRISES L11 | VP DEVELOPERS AND CONTRACTOR L4 | M/S SHREE HARE KRISHNA INFRA L7 | AGREN ENTERPRISES L9 | M/S J J ENTERPRISES L8 | ShreHari Civil Enginneering and Contractors L2 | SHREE DNYANRAJ ENTERPRISES L10 | R K Construction L13 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Dismantling wall and ceiling boards (Fiber pulp, insulation etc or insulation boards any thickness including cover fillets complete all as specified and directed. | 1,190 | Sqm | 5 ₹5,950 Lowest | 10 ₹11,900 | 50 ₹59,500 | 5 ₹5,950 Lowest | 10 ₹11,900 | 25 ₹29,750 | 5 ₹5,950 Lowest | 5 ₹5,950 Lowest | 9 ₹10,710 | 5 ₹5,950 Lowest | 5 ₹5,950 Lowest | 10 ₹11,900 | 60 ₹71,400 |
| 2.00 | Material & labour for false ceiling of plain gypsum board 12mm thick and frame made out of MSGI BPS grade, angle 24mm x 24mm x 0.35mm, 'T' section 24mm x 25mm x 0.30mm and main runner 'T' section 24mm x 38mm x 0.43mm complete with angle fixed to wall with rawl plug 100mm long of maximum 600mm c/c , hanging with 2.50mm / 3.00 mm dia GI wire suspenders fixed to ceiling with 80mm long rawl plug providing 1 No per Sqm complete with and including painting two coats of plastic emulsion paint over and including one coat of primer and preparation of surface complete all as specified and directed by the Engr-in-charge. | 60 | Sqm | 500 ₹30,000 Lowest | 900 ₹54,000 | 1,150 ₹69,000 | 900 ₹54,000 | 900 ₹54,000 | 1,100 ₹66,000 | 800 ₹48,000 | 975 ₹58,500 | 999 ₹59,940 | 1,020 ₹61,200 | 800 ₹48,000 | 1,200 ₹72,000 | 1,050 ₹63,000 |
| 3.00 | Supply & fix POP decorative cornice 100mm size of approved design and pattern fixing along wall and ceiling juction complete all as specified. | 40 | Rm | 200 ₹8,000 | 200 ₹8,000 | 100 ₹4,000 Lowest | 300 ₹12,000 | 500 ₹20,000 | 250 ₹10,000 | 300 ₹12,000 | 100 ₹4,000 Lowest | 759 ₹30,360 | 320 ₹12,800 | 200 ₹8,000 | 400 ₹16,000 | 200 ₹8,000 |
| 4.00 | Supply & fix in repair 5 mm thick coloured of any selecetd design hollow PVC wall cladding strips interlocked to each other fitted to wall including PVC 'U' shapes at top/ bottom and PVC angles at windows/door openings all as per manufacturer’s fixing instructions complete all as specified and directed. | 550 | Sqm | 800 ₹4,40,000 Lowest | 1,200 ₹6,60,000 | 1,150 ₹6,32,500 | 900 ₹4,95,000 | 999 ₹5,49,450 | 1,700 ₹9,35,000 | 1,000 ₹5,50,000 | 950 ₹5,22,500 | 999 ₹5,49,450 | 1,210 ₹6,65,500 | 875 ₹4,81,250 | 1,200 ₹6,60,000 | 1,500 ₹8,25,000 |
| 5.00 | Supply & fix 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall and make PVC frame/grid as per manufacturers instruction complete all as directed by the Engr-in-Charge. | 200 | Rm | 150 ₹30,000 | 200 ₹40,000 | 50 ₹10,000 | 20 ₹4,000 Lowest | 25 ₹5,000 | 250 ₹50,000 | 150 ₹30,000 | 150 ₹30,000 | 299 ₹59,800 | 330 ₹66,000 | 150 ₹30,000 | 300 ₹60,000 | 90 ₹18,000 |
| 6.00 | Material and Labour for snap grid ceiling with and including 19mm thick semi - perforated edge 60cm x 60cm in ceiling board over and including GI grid prelude XL 24 mm grid main runner height 37mm and secondary runner height 30mm including 2.6mm/2.8mm GI wire suspenders of suitable length as per manufacturers instructions complete all as directed by the Engr-in-Charge. | 480 | Sqm | 500 ₹2,40,000 Lowest | 950 ₹4,56,000 | 1,200 ₹5,76,000 | 900 ₹4,32,000 | 1,000 ₹4,80,000 | 1,100 ₹5,28,000 | 800 ₹3,84,000 | 1,190 ₹5,71,200 | 1,799 ₹8,63,520 | 1,100 ₹5,28,000 | 650 ₹3,12,000 | 1,200 ₹5,76,000 | 1,200 ₹5,76,000 |
| 7.00 | Material & labour for 10mm thick PVC insulated panels 600mmx600mm with EPS stuck to 1mm printed PVC sheet suitabley placed in and including flase ceiling grid made of GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 mm and 30 mm and web 27 mm fixed to surrounding wall using nylon sleeves and screw at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx. 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2mtr length) of 0.55 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. Hangers 6 mm dia. GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. Flat 40mm x 3mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed. | 100 | Sqm | 800 ₹80,000 | 950 ₹95,000 | 1,200 ₹1,20,000 | 850 ₹85,000 | 980 ₹98,000 | 2,000 ₹2,00,000 | 1,100 ₹1,10,000 | 1,475 ₹1,47,500 | 1,299 ₹1,29,900 | 1,050 ₹1,05,000 | 750 ₹75,000 Lowest | 1,200 ₹1,20,000 | 1,300 ₹1,30,000 |
| 8.00 | Demolition of brickwork or stone work/boulder masonary built in cement mortar or cement lime mortar complete all as specified and directed. | 2 | Cum | 400 ₹800 | 100 ₹200 | 500 ₹1,000 | 150 ₹300 | 250 ₹500 | 300 ₹600 | 110 ₹220 | 100 ₹200 | 50 ₹100 | 20 ₹40 Lowest | 25 ₹50 | 200 ₹400 | 1,000 ₹2,000 |
| 9.00 | Material and Labour for precast cement concrete 1:3:6, type C-1, (20mm graded stone aggregate) masonary with solid blocks, exc 10cm in width and setting in cement mortar (1:6) complete all as specified and directed. | 2 | Cum | 3,000 ₹6,000 Lowest | 3,500 ₹7,000 | 11,000 ₹22,000 | 3,500 ₹7,000 | 4,000 ₹8,000 | 5,000 ₹10,000 | 4,000 ₹8,000 | 4,500 ₹9,000 | 4,000 ₹8,000 | 5,800 ₹11,600 | 3,500 ₹7,000 | 5,000 ₹10,000 | 6,200 ₹12,400 |
| 10.00 | Material and Labour for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 complete all as specified and as directed | 50 | Sqm | 100 ₹5,000 Lowest | 120 ₹6,000 | 500 ₹25,000 | 120 ₹6,000 | 251 ₹12,550 | 275 ₹13,750 | 120 ₹6,000 | 180 ₹9,000 | 150 ₹7,500 | 210 ₹10,500 | 200 ₹10,000 | 200 ₹10,000 | 330 ₹16,500 |
Tender Value
Refer Docs
EMD Value
₹60,000
Closing Date
12 Feb 2026, 6:00 pmClosed
GE MH AND RH KHADKI
Military Engineer Services Garrison Engineer MH and Range Hills Range Hills Road Khadki, Pune 411003
REPAIR TO FALSE CEILING WALL PANELLING AND MISC WORKS IN OTM AND MD ACCN AT RANGE HILL AREA UNDER GE MH AND RH KHADKI
2026_MES_749713_1
8835/E8
Open Tender
Civil Works
Item Rate
180 days
GE MH AND RH KHADKI
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE MH AND RH KHADKI
₹60,000
28 Mar 2026
22 Jan 2026
14 Feb 2026
22 Jan 2026
12 Feb 2026
5 Feb 2026
22 Jan 2026 - 12 Feb 2026
Dismantling wall and ceiling boards (Fiber pulp, insulation etc or insulation boards any thickness including cover fillets complete all as specified and directed.
Material & labour for false ceiling of plain gypsum board 12mm thick and frame made out of MSGI BPS grade, angle 24mm x 24mm x 0.35mm, 'T' section 24mm x 25mm x 0.30mm and main runner 'T' section 24mm x 38mm x 0.43mm complete with angle fixed to wall with rawl plug 100mm long of maximum 600mm c/c , hanging with 2.50mm / 3.00 mm dia GI wire suspenders fixed to ceiling with 80mm long rawl plug providing 1 No per Sqm complete with and including painting two coats of plastic emulsion paint over and including one coat of primer and preparation of surface complete all as specified and directed by the Engr-in-charge.
Supply & fix POP decorative cornice 100mm size of approved design and pattern fixing along wall and ceiling juction complete all as specified.
Supply & fix in repair 5 mm thick coloured of any selecetd design hollow PVC wall cladding strips interlocked to each other fitted to wall including PVC 'U' shapes at top/ bottom and PVC angles at windows/door openings all as per manufacturer’s fixing instructions complete all as specified and directed.
Supply & fix 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall and make PVC frame/grid as per manufacturers instruction complete all as directed by the Engr-in-Charge.
Material and Labour for snap grid ceiling with and including 19mm thick semi - perforated edge 60cm x 60cm in ceiling board over and including GI grid prelude XL 24 mm grid main runner height 37mm and secondary runner height 30mm including 2.6mm/2.8mm GI wire suspenders of suitable length as per manufacturers instructions complete all as directed by the Engr-in-Charge.
Material & labour for 10mm thick PVC insulated panels 600mmx600mm with EPS stuck to 1mm printed PVC sheet suitabley placed in and including flase ceiling grid made of GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 mm and 30 mm and web 27 mm fixed to surrounding wall using nylon sleeves and screw at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx. 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2mtr length) of 0.55 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. Hangers 6 mm dia. GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. Flat 40mm x 3mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed.
Demolition of brickwork or stone work/boulder masonary built in cement mortar or cement lime mortar complete all as specified and directed.
Material and Labour for precast cement concrete 1:3:6, type C-1, (20mm graded stone aggregate) masonary with solid blocks, exc 10cm in width and setting in cement mortar (1:6) complete all as specified and directed.
Material and Labour for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 complete all as specified and as directed
Material and Labour for preparation of new undecorated surface of wall and applying two coats of cement base paint over and including a coat of primer complete all as specified and as directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for in any position complete all as specified and directed
Supply and Fixing Joist channel, angle, MS pipe or tee sections fixed independently, without conneted plated etc Fe-410-W Gde E-250 Quality 'A' complete all as specified and directed
Material & labour for PCC 1:3:6 type C2 (40mm graded stone aggregate) in foundation for fencing post etc complete all as specified and directed.
Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed.
Material & labour for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc confirming to Fe-410-W Gde E-250 Quality 'B' complete all as specified and directed.
Supply and Fixing Plates (plain or chequered) channels, square cut or notched (ordinary & counter sunk) forming holes, without any attachment Fe-410-W Gde E-250 Quality 'A' complete all as specified and directed.
Supply and Fixing Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers & one hexagonal or square nut, but length of bolts exc 5cm but n. exc 10cm long of Diameter of shank 11mm to 15mm complete all as specified and directed
Dismantling of plain or corrugated steel /AC sheets in roof coverings any type complete all as specified and directed
Supply & fix in repair Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, sunshades/chajjas etc fixed with self tapping screws complete all as specified and directed.
Supply & fix in repair Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/ridge,eaves gutters with end stops,drop ends or nozzles etc as required at site,eaves board etc, fixed with self tapping screws complete all as specified and directed.
Material & labour for preparation of untreated new steel surfaces over 10cm in width or girth and applying two coats of synthetic enamel paint (1st grade quaility) of approved colour over and including a coat of red oxide primer complete all as specified and directed.
Demolition of cement concrete (un reinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete all as specified and directed
Material & labour for cement concrete 1:4:8, type D-2, (40mm graded stone aggregate) 75 mm thick sub base or similar items complete all as specified and directed
Material & labour for Sand filling under floors or in foundation including watering and consolidation complete all as specified and directed.
Material & labour for 60mm thick coloured rubburised, glossy finish machine pressed interlocking pattern paver block any shape and size conforming to IS 15658-2006 of M-40 Grade complete all as specified and directed.
Material & labour for preparation of old brick/concrete/stone surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint (1st grade quality) complete all as specified and directed.
Material & labour for preparation of plastered or unplastered old decorated surfaces of walls including brooming down or scraping down with steel wire brushes of smoke spots, moulds, moss efflorescent salts, treating oil and greasy spots and applying of one coat of cement base paint on walls complete all as specified and directed.
stage.html
html • 0.08 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.19 MB
TENDER8835.pdf
Tender Documents • 1.23 MB
BOQ_839625.xls
BOQ • 0.29 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .