Street light arrangement in Bagsewaniya Basti in Ward No. 54 Zone No. 13 Bhopal

1000008038-AB CABLE Supplying & laying of LT XLPE AB cable 3x25 sqmm+1x16 sqmm 1100 volts as per MPMKVVCL specification and approved make

1000004967-150 watt LED Supply and installation of high efficiency LED Flood light luminaries with high pressure die cast aluminum body (make embossing on body) with toughened glass / polycarbonate cover. The fitting should be IP66, with power factor >0.9. The color temp of the LED should be 5000 K - 5700 K with color rendering index >70. THD less then 20%. The total system output should be not less than 110 lumens/ watt & total wattage should not be more than 150 w ± 5W. The LED fitting should have L70 life of more than 50000 burning hours at 35 degree ambient temp. Surge protection should be more than 4 KV internal and 10KVexternal. The LED should have individual optic lenses and bat wing photometry suitable for street light. The LED fitting should be provided with 2 years guarantee for free repairing/maintenance or replacement of LED light fitting, LED, driver, surge protector, toughened glass / polycarbonate cover etc. on stamp paper with service center details.LM79-80 report with batch no. of supply must be supply at the time of delivery, BIS certificate is must be submitted with catalogue/model no. Spare part list of driver, cover and LED must be submitted before supply.

3000002029-Tenson/Dead end clamps Supplying & installation of Tension clamps Dead end clamps as per MPMKVVCL specification and approved make

1000005523-S. clamp Supply & installation of LT S. clamp with attachment for AB cable

3000001217-Piercing connector type-I Supply and installation of Piercing connector type-I for Single Phase/three phase main 16-50 sqmm tap off as per MPMKVVCL spetification and approved make

1000007201-G.I pipe Bracket 1,1/2"dia5' Supply and installation of G.I.pipe bracket 1 1/2" dia 5" long bend at 45 degree swastik, Tata, Jindal make midium class, MS clamp patti 25*5*5 cm with 4 no hole 12mm size as per sample,nut bolt 25*2.5 cm dia

1000004963-30 watt LED Supply and installation of high efficiency LED street light luminaries with high pressure die cast aluminum body (make embossing on body) with toughened glass / polycarbonate cover. The fitting should be IP66, with power factor >0.9. The color temp of the LED should be 5000 K - 5700 K with color rendering index >70. THD less then 20%. The total system output should be not less than 110 lumens/ watt & total wattage should not be more than 30 w ± 5W. The LED fitting should have L70 life of more than 50000 burning hours at 35 degree ambient temp. Surge protection should be more than 4 KV internal and 10KVexternal. The LED should have individual optic lenses and bat wing photometry suitable for street light. The LED fitting should be provided with 2 years guarantee for free repairing/maintenance or replacement of LED light fitting, LED, driver, surge protector, toughened glass / polycarbonate cover etc. on stamp paper with service center details.LM79-80 report with batch no. of supply must be supply at the time of delivery, BIS certificate is must be submitted with catalogue/model no. Spare part list of driver, cover and LED must be submitted before supply.

1000001873-45 watt LED Supply and installation of high efficiency LED street light luminaries with high pressure die cast aluminum body (make embossing on body) with toughened glass / polycarbonate cover. The fitting should be IP66, with power factor >0.9. The color temp of the LED should be 5000 K - 5700 K with color rendering index >70. THD less then 20%. The total system output should be not less than 110 lumens/ watt & total wattage should not be more than 45 w ± 5W. The LED fitting should have L70 life of more than 50000 burning hours at 35 degree ambient temp. Surge protection should be more than 4 KV internal and 10KVexternal. The LED should have individual optic lenses and bat wing photometry suitable for street light. The LED fitting should be provided with 2 years guarantee for free repairing/maintenance or replacement of LED light fitting, LED, driver, surge protector, toughened glass / polycarbonate cover etc. on stamp paper with service center details.LM79-80 report with batch no. of supply must be supply at the time of delivery, BIS certificate is must be submitted with catalogue/model no. Spare part list of driver, cover and LED must be submitted before supply.

1000004966-60 watt LED Supply and installation of high efficiency LED street light luminaries with high pressure die cast aluminum body (make embossing on body) with toughened glass / polycarbonate cover. The fitting should be IP66, with power factor >0.9. The color temp of the LED should be 5000 K - 5700 K with color rendering index >70. THD less then 20%. The total system output should be not less than 110 lumens/ watt & total wattage should not be more than 60 w ± 5W. The LED fitting should have L70 life of more than 50000 burning hours at 35 degree ambient temp. Surge protection should be more than 4 KV internal and 10KVexternal. The LED should have individual optic lenses and bat wing photometry suitable for street light. The LED fitting should be provided with 2 years guarantee for free repairing/maintenance or replacement of LED light fitting, LED, driver, surge protector, toughened glass / polycarbonate cover etc. on stamp paper with service center details.LM79-80 report with batch no. of supply must be supply at the time of delivery, BIS certificate is must be submitted with catalogue/model no. Spare part list of driver, cover and LED must be submitted before supply.