Loading
Loading…
Loading…
Tender Value
₹68.8 L
EMD Value
₹1.4 L
Closing Date
23 Mar 2026, 4:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
SRDMEMAS/O
13 conditions · 2 needing a document upload
Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turnover of V/N or "V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB of GCC for works -2022, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
10.1Technical Eligibility Criteria: (a)The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii)One similar work each costing not less than the amount equal to 60% of advertised value of the tender. *Definition of Similar Work Means: "Supply, installation, testing, and commissioning of HSD pipelines or petrochemical pipelines or Pipelines for Transporting Petrochemicals (both above and below ground), for deployment in State Government/Central Government Departments/ Public Sector Undertakings (PSUs) /Zonal Railways"
14 conditions · 3 needing a document upload
Mandate form for NEFT ( to be filled by the tenderer as per annexure F
Rates are inclusive of all tax. The tenderer has to remit GST at the extant rates and submit documentary evidence failing which the same will be deducted by Railways.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The tenderer is advised to read the scope of work and tender conditions and also visit the site of work before quoting the rates. No post tender correspondence will be entertained to enhance the rate on above account.
All the copies of annexure enclosed with the tender should be duly filled in by the tenderer and uploaded in the appropriate columns duly signed and stamped on each page
Outsourcing of "Supply, installation & commissioning of fuel pipelines for Additional Fuelling Points in BBQ Yard".
MMW271AdditionalFuel1
MMW271AdditionalFuel1
Open
Works - General
60 Days
Chennai, Tamil Nadu
₹0
₹1.4 L
23 Mar 2026
25 Feb 2026
4 Mar 2026
49 items across 5 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 44,23,290 | ||
| — | — | — | 3,25,000 | ||
| Supply, Installation & Commissioning of 25 Hp Flame Proof Electric Motor with Pump | — | 1.00 | — | — | |
| — | — | — | 11,92,800 | ||
| Supply, Fabrication, Installation, Commissioning & Testing) 3" MS Pipe confirm to IS:1239 (Part 1)- 1979)- 1 Mtrs | — | 852.00 | — | — | |
| — | — | — | 5,26,500 | ||
| Supply, Fabrication, Installation & Commissioning (including Wedling & Testing) 1 0"MS with 5 mm thick Pipe IS:1239 (Part 1)-1979)-1 Mtrs (casing Pipe) | — | 117.00 | — | — | |
| — | — | — | 2,02,400 | ||
| Supply and Welding of 3" slip-on flange welded Class 150# As per ANSI/ASME B 16.5 ( 2 runs outside flange and one run inside flange) | — | 184.00 | — | — | |
| — | — | — | 92,150 | ||
| Supply and Fixing of3" Welded & Blind Flange 150# As per ANSI/ASME B 16.5 | — | 97.00 | — | — | |
| — | — | — | 3,15,000 | ||
| Supply and Installation of 3" Flanged Ball valve As per ASME CLASS 150# | — | 21.00 | — | — | |
| — | — | — | 2,16,000 | ||
| Supply ,mrl Installation of 3" Flanged Gate valve As per ASME CLASS 150# (shut off valve for Pipe | — | 9.00 | — | — | |
| — | — | — | 1,13,400 | ||
| Fixing of3" Welded Flange 150# with Gaskets and Nut Bolts As per ANSI/ASME B 16.5 | — | 126.00 | — | — | |
| — | — | — | 52,500 | ||
| Supply and fixing of 1" Ball valve As per ASME CLASS 150# (shut off valve for Hose) | — | 21.00 | — | — | |
| — | — | — | 52,500 | ||
| Supply,Fabrication installation commissioning & Testing of 1" Pipe (Nipple & adaptor | — | 21.00 | — | — | |
| — | — | — | 3,62,250 | ||
| Supply and Fixing of Braided Rubber Hose 25 mm- 1 Mtrs | — | 315.00 | — | — | |
| — | — | — | 1,26,000 | ||
| Hose Box with Locking arrangement | — | 21.00 | — | — | |
| — | — | — | 1,26,000 | ||
| Ball Valve Locking arrangement Box | — | 21.00 | — | — | |
| — | — | — | 74,800 | ||
| ISMC 100 MS Channels | — | 34.00 | — | — | |
| — | — | — | 2,96,730 | ||
| Plate 10 MM | — | 27.00 | — | — | |
| — | — | — | 1,28,400 | ||
| Foundation Bolts for support | — | 428.00 | — | — | |
| — | — | — | 2,07,000 | ||
| 3" -"U" Clamp with Nuts and Washer | — | 230.00 | — | — | |
| — | — | — | 13,860 | ||
| Jumper clip for flanges. | — | 126.00 | — | — |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
TenderDocumentAdditionalFuelpointsBBQ1.pdf Tender Document BBQ Additional Fuel
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .