Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹26.4 LQualified GROUND FLOOR NEAR APWD WORKSHOP WIMBERLY GUNJ WIMBERLYGUNJ SOUTH ANDAMAN ANDAMAN AND NICOBAR 744206 | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744206 | L1 | Qualified MSE, MII, Category: OBC | |
| 2 | L2₹27.5 L+₹1.1 L (4.15%)Qualified OPP LAXMI MOTORS BATHU BASTI NH 04 BATHU BASTI SOUTH ANDAMAN ANDAMAN NICOBAR 744105 | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744105 | L2 | Qualified MSE, MII, Category: General | |
| 3 | L3₹29.3 L+₹2.8 L (10.7%)Qualified C O SRG TRADERS C O SRG TRADERS PHOENIX BAY PHOENIX BAY SOUTH ANDAMAN ANDAMAN NICOBAR 744102 | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744102 | L3 | Qualified MSE, MII, Category: General | |
| 4 | L4₹31.7 L+₹5.3 L (19.9%)Qualified GURDWARA LINE SHOWROOM NO 6 DESHMESH MARKET SRI VIJAYA PURAM 744101 | SRI VIJAYA PURAM | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744101 | L4 | Qualified MSE, MII, Category: General | |
| 5 | Disqualified 64 WARD 6 HOTEL PHOENIX BUILDING M AROAD VILLAGE TOWN PHOENIX BAY CITY PORT BLAIR NORTH AND MIDDLE ANDAMAN ANDAMAN AND NICOBAR ISLANDS 744101 INDIA | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744101 | - | Disqualified MSE, MII, Category: OBC |
Tender Value
₹27.1 L
EMD Value
₹85,000
Closing Date
7 Nov 2024, 11:00 amClosed
Provn of furniture for 20 JCOs DU
6920457
GEM/2024/B/5413491
Two Packet Bid
Almirah small HH HS,Bed hard without MNF Set,Chair dining,Chair Easy,Chair writing,Charpoy IP hard
90 days
Andaman And Nicobar Islands; South Andamans
Total value wise evaluation
BOQ
6 documents required · 6 mandatory
3 yrs
₹3
50%
₹85,000
7 Nov 2024
17 Oct 2024
7 Nov 2024
| Item No | Item Title | Description | Qty | Unit | Consignee | Delivery (days) |
|---|---|---|---|---|---|---|
| 1 | Almirah small HH HS | Almirah small HH HS 1mm thick MS sheet shall be used to manufacture Almirah except legs. Two Legs shall be provided to almirah as shown on drawing and shall be of 1.25 mm thick MS sheet. Cromium plated stainless steel godrej type handle100mm long shall be fixed on shutters, Almirah shall be fitted with ISI marked 75mm 6 lever lock with three way locking system. Make of lock Harrison or Link or Godrej. Front shutters shall have two leaves of equal size. Almirah shall be finished with two coats of synthetic enamel paint upto obtaining glossy finishing over a coat of redoxide primer with sray gun after properly smoothening the surface with sand paper. shade of TA gray colour or as approved GE both internaly and externaly. Rest all as specified or shown in drawing and directed by Enginer-in-Charge. | 20 | Nos | South Andaman | 60 |
| 2 | Bed hard without MNF Set | Bed hard without MNF Set All Steel member shall be 18 Gauge MS pipe. The frame of head board and foot board shall be of 38mm MS square pipe.18mm MS square pipe shall be provided in the inner of head and foot board frame as shown in drg. 18mm thick both side prelaminated particle board of walnut shade with 4mm thick teakwood beading shall be screwed to MS strip arc welded with 18mm thick square pipe with standard workmanship both in head and foot board. One stiffener of size 25mmx25mm shall be welded between the two legs of head board over 150mm from the ground level. The top of bed hard shall be of 12mm thick BWR grade plywood of approved make fixed over the four equidistant stiffener of size 25mmx25mm SQ MS pipe in line with bottom of 25x65mm long rail section. PVC shoes shall be provided to legs of bed. All steel members shall be finshed with two coats of synthetic enamel paint upto obtaining glossy finishing over a coat of redoxide primer with sray gun after properly smoothening the surface with sand paper in black colour. Rest all as per drawing. Make of ply Century or Green Ply or Archidply. | 40 | Nos | South Andaman | 60 |
| 3 | Chair dining | Chair dining JCOs and ORs All wood shall seasoned first class teak wood free from knots and defects.Hard Nylon buffers shall be fixed at the bottom of legs with brass screws. Readymade PVC seat 4 mm thick with holes shall be screwed with rails after providing one additional support of 25 x 25 mm Stiffner between and parallel to front and back rail or rest on side rail. All wooden surface shall be french polished with glossy finish. shade as approved by GE. Rest all as specified or shown in drawing and directed by Engineer-in-Charge. | 80 | Nos | South Andaman | 60 |
| 4 | Chair Easy | Chair Easy All wood shall seasoned first class teak wood free from knots and defects.Hard Nylon buffers shall be fixed at the bottom of legs with brass screws. Canning of chairs by true Godrej pattern with plastic cane 2mm to 2.5mm wide,white colour, quality as approved by GE all as specified and as shown on drgs.All wooden surface shall be french polished with glossy finish, shade as approved by GE.Rest all as specified or shown in drawing and directed by Engineer-in-Charge. | 60 | Nos | South Andaman | 60 |
| 5 | Chair writing | Chair writing The frame of the chair shall be of 16 gauge 25mm dia MS tubular frame powder coated. Back shall be designed with contoured lumber support for extra comfort. 12mm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam with PVC lippling alround shall be provided at seat and back. Arm rest shall be of black integral skin poly urethane with shore A hardness and reinforced with MS insert. It shall be scratch and wheather resistant. Both hand rest section shall have inner and outer dia of 210mm and 230mm respectively and have slope towards front. Rest all as specified or shown in drawing and directed by Engineer-in-Charge | 20 | Nos | South Andaman | 60 |
| 6 | Charpoy IP hard top | Charpoy IP hard top Long and short rails of bed shall be 65 x 25 mm 16 gauge rectangle MS pipe.Stifners shall be 25 mm 16 gauge square MS pipe. Legs shall be 32 mm 16 gauge square MS pipe and welded properly at joints to make the charpoy. 25 x 60 x 6 mm cleats be welded with short rails inner side to support the plywood. 12 mm thick ply wood BWR type unpolished shall be provided to the top of charpoy screwed with cleat and stiffners by nut & washers. All steel members shall be finshed with two coats of synthetic enamel paint upto obtaining glossy finishing over a coat of redoxide primer with sray gun after properly smoothening the surface with sand paper in black colour. Rest all as specified or shown in drawing and directed by Enginer in Charge. | 40 | Nos | South Andaman | 60 |
| 7 | Charpoy Folding with hard top | Charpoy Folding with hard top 25 mm dia 2mm thick MS conduit pipe shall be used for frame work. Top shall be 9mm thick BWR grade plywood. Rest all as specified or shown in drawing and directed by Enginer in Charge. | 20 | Nos | South Andaman | 60 |
| 8 | Peg table | Peg table All wood shall seasoned first class teak wood free from knots and defects. Hard Nylon buffers shall be fixed at the bottom of legs with brass screws. H Type leg stiffeners shall be provided for better support. Top shall be 18 mm thick exterior grade MDF board one side laminated in light Wallnut shade or as approved by GE, duly covered with 4 mm thick teak wood beading in matching shade with synthetic adhesiveFevicol SH. All wood surfaces shall be french polished with high glossy finish. Rest all as specified mor shown in drawing and directed by Enginer-in-Charge. | 40 | Nos | South Andaman | 60 |
| 9 | Rack Shoe Steel | Rack Shoe Steel Maine frame shall be 25mm dia 18 guage MS pipe.Shelf frame shall be 19mm dia 18 guage MS pipe and covered by 3mm dia MS rods three in length wise and nine in width wise. All steel and iron surface shall be finished with two coats of synthetic enamel paint upto obtaining glossy finishing over a coat of redoxide primer after preparation of surfaces. | 20 | Nos | South Andaman | 60 |
| 10 | Table Bed Side | Table Bed Sid Top, sides and front shall be 18mm thick exterior grade MDF board one side laminated, as approved by GE, duly covered with 4mm thick half round teak wood beading in matching shade with synthetic adhesive Fevicol SH. Both drawer shall be 12mm thick BWR grade plywood and shall be supported with telescopic channel for smooth functioning. All legs shall be connected with H type stiffeners for better support. All steel surface shall be finished with two coats of synthetic enamel paint upto obtaining glossy finishng over a coat of redoxide primer with spray gun after properly smoothening the surface with sand paper. Black colour or as approved GE. Rest all as specified or shown in drawing and directed by Enginer in Charge. | 40 | Nos | South Andaman | 60 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
bid_6920457.pdf
GEM_BID
boq_20_jcos_du_haddo_2024-09-12-23-30-56_8f86c569db07d1709fde2b7c46e41f57.pdf
BOQ
boq_20_jcos_du_haddo_2024-09-12-23-30-56_da44e7c1efce973c74ab5843311df6ba.csv
BOQ
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .