Provn of guard rest room DG set of 62.5KVA and 30KVA and special repair of submersible pump set at Janglot under GE Basoli

Amount

Excavation in trenches in any type of soil n.exc 1.50m wide and n. exc 1.50m in depth for foundation of pole/stay and laying of UG Cable and other and getting out complete all as specified and directed.

Surface excavation in any type of soil n. exc.30cm deep and averaging 15cm deep and getting out complete all as specified and directed.

Removal of excavated (soil) material to a distance not exceeding 50m and depositing where directed at a level not exc. 1.5m above the starting point complete all as specified and directed.

Returning, filling in, including spereading, leveling, watering and well ramming in layers not exc 25cm thick each complete all as specified and directed

M&L Cement Concrete in foundation filling and mass concrete of mix 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) complete all as specified and directed.

M&L Cement Concrete in foundation filling and mass concrete of mix 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) complete all as specified and directed.

M&L Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM 1:6 including flush pointing with same mortar as the work proceed complete all as specified and directed.

M&L Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM 1:4 including flush pointing with same mortar as the work proceed complete all as specified and directed.

M&L brickwork with subclass 'B' bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed

M&L Rendering 15 mm thick on other than fair faces of brick work or concrete surfaces with 1:6 CM on internal faces of wall, finishing the surfaces even & smooth w/o using extra cement complete all as specified and directed.

M&L Rendering 15mm thick on brick or concrete surface in CM 1:4, finished even and smooth with out using extra cement complete all as specified and directed

M&L Rendering 10mm thick on fair faces of concrete surfaces with CM 1:3 on ceiling surfaces etc., finishing the surfaces even & smooth w/o using extra cement complete all as specified and directed.

M&L Reinforced cement concrete M-25 (Design mix) using 20mm graded crushed stone aggregates as in foundations, including rafts, footings, foundation beams, plinth beams, bases of columns etc basement slabs, under-reamed piles and mass concrete complete all as specified and directed

M&L Reinforced cement concrete M-25 (Design mix) using 20mm graded crushed stone aggregates as in slabs, supported on walls, beam and columns in floors, and in shelves and the like complete all as specified and directed.

M&L Reinforced cement concrete M-25 (Design mix) using 20mm graded crushed stone aggregates as in columns, pillars, piers,posts and struts complete all as specified and directed.

M&L Reinforced cement concrete M-25 (Design mix) using 20mm graded crushed stone aggregates as in beams chajja, cantilevers, bressummers, lintels over 1.5 mtr span complete all as specified and directed.

Steel Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams,sides and sofits of foundation and plinth beams; and similar works; vertical or to batter for rough finished flat surfaces complete all as specified and directed.

Steel Form work to sides and soffits of floor/roof beam for rough finished flat surfaces of concrete complete all as specified and directed.

Steel Form work to sides of pillars, posts, struts, piers, columns and stanchions for rough finished flat surfaces of concrete complete all as specified and directed.

Steel Form work to soffits of suspended slabs such as roof slabs, floor slabs etc not exceeding 200mm thick complete all as specified and directed.

M&L TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

-ditto- here-in-before but 8mm dia and over upto and including 10mm dia as in stirrups, spacers, binders complete all as specified and directed.

M&L 75 mm thick Cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in sub base complete all as specified and directed

M&L Non-skid Ceramic tiles 7 to 8 mm thick (square /rectangular) area of each tile exceeding 0.18 sqm but n . Exc 0.38 sqm ,in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match shade over and including 15 mm thick screed bed in CM 1:4. all complete all as specified and directed.

M&L Non-skid Ceramic tiles 7 to 8 mm thick (square /rectangular) area of each tile n . Exc 0.18 sqm ,in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match shade over and including 15 mm thick screed bed in CM 1:4. all complete all as specified and directed

M&L Glazed ceramic coloured tiles of size 450x300X7 mm thick in vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match required shade with 10 mm thick cement plaster in CM 1:4 .complete all as specified and directed

S&F steel window/ventilator factory made out of box type frame and shutter (double shutter), one for glazing another for fly proofing) made out of section using flash butt welding, hinges shall be provided to both shutters complete including all fittings and grills, all as per drg No CEPZ/TD/27/13 Sh 1/4 to 4/4 complete all as specified and directed.

S&F Frosted Sheet glass 4.00 mm thick glazing with oil putty in squares n exc 0.5 sqm in each pane complete all as specified and directed.

S&F Galvanised MS wire cloth 0.46mm nominal dia of wire and average width of aperature 1.18mm, complete all as specified and directed

S&F Solid PVC door frame (single rebated) of size 60mmx30mm made out of solid PVC frame with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100x8 sheet metal CSK screws complete all as specified and directed and as shown on drawing .

S&F Factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2,4 or 6 raised panel design with 2mm thick moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.

S&F 100 mm long stainless steel butt hinges with SS screws complete all as specified and directed.

S&F AluminIum anodised barrel tower bolt of size 150mm extruded section complete all as specified and directed.

S&F Extruded aluminum alloy handles of size 150mm fabricated type anodized complete all as specified and directed.

S&F mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed .

S&F Curtain rod 20mm dia of Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified and directed .

S&F Pressed steel frame for doors with one or more rebates including necessary fixing lugs ,hinges, lock strike plate size of frame 125X60mm complete all as specified and directed.

PCC 1:3:6 type C-0 using 12.50 mm graded crushed stone aggregate as in back filling of pressed steel door frames and hold fast. complete all as specified and directed

S&F Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, 40mm thick complete all as specified and directed.

S&F 35mm thick IInd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.20 (a); to chowkat complete all as specified and directed.

S&F 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F Floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring fixed in floor complete all as specified and directed.

M&L for Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed

M&L for Earth filling, Spreading and levelling in layers n exc. 25 cm thick each and watering and well ramming under floor complete all as specified and directed

M&L Hardcore of broken stone or boulders of gauge n. exc. 63mm , deposited spread and levelled in layers n. exc. 15cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L 75 mm thick PCC 1:3:6 type C-2 using 40 mm graded crushed stone aggregate in plinth ,sub floor,sub base etc.laid in alternate bays finished even and fair w/o using extra cement complete all as specified and directed.

M&L For Preparation of new plastered surface and applying two coats of 100% Premium acrylic emulsion paint having VOC less then 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & Fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. complete all as specified and directed.

M&L Preparation of new steel surfaces of any description exc 10 cm width or girth and apply two coats of synthetic paint over a coat of red oxide primer complete all as specified and directed.

M&L Preparation of new plastered surfaces and applying two coats of distemper oil emulsion on plastered surfaces over and including 3mm thick wall care putty complete all as specified and directed.

M&L Prepration of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M&L for preperation of new wooden surface and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for roof treatment with the following specification- applying water proofing treatment on horizontal or vertical surfaces by applying oil bound bitumen primer @ 0.20 Kg/sqm and providing 3mm thick APP modified water proofing membrane weighing not less than 3 Kg/sqm reinforced with non-woven polyester matt weighing not less than 160 gm/sqm, The overlap shall be minimum 100mm on transverse direction and 75 mm on longitudinal direction and sealing overlap by torch application and bonded and applying a coat of blown grade hot bitumen 85/25 over and below the membrane @ 1.20 Kg/sqm in drying over the membrane finished with solar reflective bituminous aluminium paint/primer @ 0.10 Kg/sqm over APP membrane after cleaning the surfaces by removing dust, dirt etc. as per manufacturer’s instructions including 15mm thick screed in CM 1:4 and all as specified and as directed. NOTE :- The work shall be executed at site by the authorised applicator of APP and as approved by the GE.

S&F of PVC flushing cistern low level with 10 ltrs discharge capacity with inlet ball valve etc complete all as specified and directed .

S&F Vitreous china wash basin white , flat back size 550 X 400 mm including brackets including cutting for and pinning in ends of brackets or erecting stand including PTMT 32mm waste coupling and waste pipe complete all as specified and directed

S&F Vitreous China wash down water closet pan (orissa pattern), white 580x440 with intergral foot rest. complete all as specified and directed

S&F flush pipe of polythylene of low or high density or PVC 32mm dia, for low/high level flushing cistern complete all as specified and directed.

S&F Vitreous china bowl urinal Half stall type (white) minimum with grating and union for discharge pipe including Chromium plated spreader for fixing with 15mm dia pipe complete all as specified and directed.

S&F Pillar tap cast copper alloy fancy type with capstan heads, chromium plated Fancy type screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long shanks and nut screwed for iron pipe of 15 mm bore complete all as specified and directed

S&F bib taps screwed down high pressure with both ends for iron pipe 15mm bore fancy type chromium plated complete all as specified and directed

S&F stop valve cast copper alloy ,chromium plated fancy type, screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe complete all as specified and directed.

S&F stop valve cast copper alloy screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe with long shank chromium plated concealed type complete all as specified and directed.

S&F chromium plated shower rose with or without swivel joints 125mm size incl fixing to steel pipe complete all as specified and directed.

S&F PVC connection 15mm size with PTMT nuts of length 450mm. complete all as specified and directed

S&F Chromium plated towel rail 600 mm long fixed with and incl Chromium plated brass screws and wooden/plastic cleats complete all as specified and directed .

S & F PVC shelves of PTMT fixed with and including chromium plated brass screws and plastic cleats complete all as specified and directed.

S& F mild steel Peg set of four hooks size 50mm to 60mm complete all as specified and directed.

Supply & Fix 15mm bore dia of tubing with screwed socket joints, medium grade galvanized steel with all necessary tube fittings and fixing complete with clips, wall hooks etc to wall and ceilings or laid in floor complete all as specified and directed.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints of 75 mm bore laying in trenches or floor complete all as specified and directed.

All as per item No 69 here-in-before but fixed on walls complete all as specified and directed .

All as per item No 69 here-in-before but dia of pipe 110 mm complete all as specified and directed.

S&F PVC (SWR) bends of (any radius) with access door of 75 mm bore complete all as specified and directed.

S&F PVC (SWR) bends of (any radius) with access door of 110 mm bore complete all as specified and directed.

S&F PVC (SWR) junction single (Double T) equal or unequal provided with access door 110 mm bore complete all as specified and directed.

S&F PVC (SWR) junction single (single T) equal or unequal provided 75 mm bore complete all as specified and directed.

PVC reducers 110 x 75 mm complete all as specified and directed.

S&F 75mm dia PVC (SWR) floor traps, plain with grating including jointing to waste pipe with solvent cement complete all as specified and directed.

S&F 75mm PVC(SWR) vent cowl complete all as specified and directed.

S & F rotational moulded polyethylene water storage tank 3 layer white colour water tank , non- toxic effect, algea formation protection (made from Virgin grade of polyetylene material which is duly stablized with anti-oxidentPlastic) of capacity 1000 litres, (cylindrical vertical one piece moulded with closed top), the internal and external surfaces of tanks are smooth, clean and free from any hidden internal defects, hoisted and fixed in position including S & F necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer, 20 mm dia PTMT valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball and 20 mm brass stop cock etc complete all as specified and directed.

M&L Granite black colour of any type 18-20mm thick machine cut as in cooking plateforms and like in cement mortar ( 1:4 ) incl pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and 20mm thick screed bed or bedding layer of mortar in cm 1:6 for laying floor finishes complete all as specified and directed.

M&L Rounding/moulding to edges of stone slabs, marble stone, granite stone slabs one edge, such as in steps, cooking platform , and other similar situations etc complete all as specified and directed.

M&L Terra kota tiling 10mm thick set and jointed with grey cement with pigment and pointed with neat cement slurry in chajjas over 15mm thick screed bed in CM 1:4 over PCC coping 1:3:6 type C-1 (using 20mm graded agg). complete all as specified and directed

M&L for Pre-polished glazed designer ENDURA tiles, coloured 30cm x 30cm x 10mm thick set jointed and pointed in neat cement slurry pointed in white or coloured cement to match in floors over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L concrete bed to drain pipes including benching under and haunching in cement concrete 1:4:8 type D2 (using 40mm graded crushed stone aggregate) for 150 mm dia pipe complete all as specified and directed. .

Material and labour for Reinforced concrete pipes 150 mm bore , class NP-3, laid and jointed complete with collars, jointed with cement mortar, laid in trenches and tested including fittings of same grade complete all as specified and directed.

M&L for rendering 15 mm thick in CM 1:4, on external surface by using WPC @ 3% by weight of cement) , . finished even and smooth without using extra cement. NOTE:- The WPC shall be paid seperately

Supply only integral water proofing compound, complete all as specified and directed.

M&L PCC 1:2:4 type B-1 ( using 20 mm graded crushed stone aggregate) as in,coping Kerb stone, steps and other similar bands plinth courses, string courses, lacing courses, copings, kneelers, appex stones, bed plates, kerbs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed

M&L for RCC 1:2:4 type ‘B-1’ (using 20mm graded crushed stone aggregate) as in precast manhole cover and cover slab for septic tanks including necessary form work and moulds etc and set in cement mortar 1:6 , complete all as specified and directed.

M&L For TMT Steel bars 6mm to 8 mm dia in reinforcement,cut to length, bent to shape required incl cranking bending spirally hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed..

Supply & Fixing 25mm bore dia of tubing , medium grade galvanized steel with all necessary tube fittings and fixing complete with tee bend elbow union socket clips, wall hooks etc to wall and ceilings or laid in floor complete all as specified and directed.

Supply & Fixing 20mm bore dia of tubing , medium grade galvanized steel with all necessary tube fittings and fixing complete with tee bend elbow union socket clips, wall hooks etc to wall and ceilings or laid in floor complete all as specified and directed.

M&L cutting and screwing existing steel tubing for alteration/additions in position without taking down including insertion of Tee complete all as specified and directed..

S&F Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed to 25 mm bore pipe complete all as specified and as directed.

S&F Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed to 20 mm bore pipe complete all as specified and as directed.

S&F Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed to 50 mm bore pipe complete all as specified and as directed.

Point wiring with 1.5 Sqmm FRLS, PVC insulated and unsheathed multi stranded flexible copper conductor cable in and incl rigid PVC conduit concealed medium grade with pressed mild steel terminal boxes(sheet not less than 1.6 mm thick) duly painted with a coat of red oxide primer with suitable thickness plastic laminated sheet cover 3mm thick of adequate size for one light or one fan controlled by one switch incl 1.5 Sqmm FRLS, PVC insulated and unsheathed multi stranded flexible copper conductor cable as earth wire(green colour) to common earth dolly complete all as specified and directed by Engr-in-charge.Note: a) Rate for cutting chases for conduits and sinking for boxes and making good to wall, floors deemed to be included in each point etc (b) On RCC roof ceiling PVC conduit shall be provided on surfaces for any necessary point with proper fixing clips and no extra cost shall be paid for the job etc complete all as per specified and directed.

All as per item No 97 but for one 3 pin 5 Amp socket outlet on independent board complete all as per specified and directed.

All as per item No 97 but for one 3 pin 5 Amp socket outlet on same board complete all as per specified and directed.

Point wiring with 2.5 sqmm FRLS, PVC insulated and unsheathed multi stranded flexible copper conductor cable drawn in and including rigid PVC concealed conduit medium grade of suitable size with sunk cast iron/pressed steel terminal boxes(sheet not less than 1.6mm thick) of adequate size with suitable thickness plastic laminated sheet cover 3mm thick for one 3 pin socket outlet 15 Amp on independent board including continuous 2.5 sqmm FRLS,PVC insulated and unsheathed copper conductor cable (multistranded) as earth wire to common earth dolly, complete all as per specified and directed.

Supplying & Fixing switch piano flush button single pole one way 5 amps 230 volts, complete all as per specified and directed.

Supplying & Fixing switch piano flush button single pole one way 15 amps 240 Volts, complete all as per specified and directed.

Supplying & Fixing socket outlet 6 amps 5 pin flush type, 240 volts, complete all as per specified and directed.

Supplying & Fixing socket out let, 5 pin, 15 amps multi purpose 2 in 1 flush type, 240 volts AC, complete all as per specified and directed.

S&F Lamp holder, PVC/Polycarbonate type with back plate having matching colour to holder suitable for angle/batten fittings complete all as per specified and directed.

S&F ceiling rose surface bake lite two to three terminal isolated body fixed on PVC round block complete all as per specified and directed.

Supplying & Fixing fan regulator electronic flush type stepped (rotary type) with 5 steps speed control complete all as per specified and directed.

S&F Wall mounted LED batten extruded aluminium heat shrink provided for efficient heat dissipation and integrated electronic driver, 20 Watt LED fitting with 100 lumen/watt 6000k, 230Volts, diffused optics etc complete with all accessories, connecting up with twin core twisted flexible copper conductor cable from ceiling rose to fitting, fixed on two PVC round block and testing complete all as per specified and directed.

S&F 20Watt LED street light/Bldg security light fitting of IP-66 protection, pressure die cast aluminum housing with epoxy powder coated finish having polycarbonate cover with all accessories pre-wired with and including medium grade GI pipe 40mm dia for bracket for fixing on pole/wall connecting with three core conductor cable of size 1.00 sqmm complete all as per specified and directed.

Supply and fixing wall mounted LED bulk head fittings, 10 watt, warm white,, 230 Volts, diffused optics ,etc complete with all accessories , connecting up with three core twisted flexible copper conductor cable from ceiling rose to fitting, and testing complete all as per specified and directed.

Supply and fix in replacement flood light of capacity 60 Watt energy saving & environmental friendly long life versatile pressure die cast aluminium with ptotection IP66 made out pressure die cast aluminium housing suitable lens & tughened glass with high power LEDs as light source with electronic chip and driver complete all as per specified and directed.

Supply and fix in replacement for junction box of size 300x250x150mm made out of 1.6 mm thick CRCA sheet powder coated front hinged door with openable and self closing arrangements including aluminium bus bar 3 Phase 4 wire system of size 20mm x 5mm fixed on SMC/DMC insulators and cable entry glands for connections and MCB SP 6 Amps-01 No all as required and fixed to poles with MS clamp made out of MS flat iron of size 25x5mm and including nuts, bolts and washers complete all as specified and directed.

Supplying, erecting, and fixing in position, steel tubular swaged and welded poles of type 410, SP-31, 9 mtr long, IS-2713 marked, with mild steel base plate (fillet welded to poles), bolts, nuts, washers etc, including painting on the outside with two coats of aluminium paint over a coat of red oxide primer on exposed surfaces and black bituminous paint on steel surface embedded in concrete and painting 05 Nos band/strip with fluorescent, red synthetic enamel paint and alternate white strip (30 cm wide each) at a distance of 30 cm from plinth block and numbering of poles, complete all as specified and directed. Note : (i) Excavation, earth work and PCC will be measured and paid for separetely under respective items of BOQ. (ii) Poles shall be swaged and welded at manufacturer's factory and not at site. The inner surface shall be factory painted.

M&L for structural steel work conirming to grade FE-410S as in cross arms, bracing, supports, clamps and back plates fabricated from structural steel sections, incuding, nuts bolts, washers, welding, bending cold or hot drilling holes for bolts in any shape or size as indicated or directed and inclusive of one primer coat, one under coat, one finishing coat of aluminium paoint and epoxy coating incuding taking down old corroded structural steel all as specified and directed.

S&F in Replacement of existing sub main wiring with two run of single core (FRLS) PVC insulated and unsheathed cable with copper conductor (Multi strand) having nominal area 4.0 Sqmm drawing into and including PVC non metallic rigid conduit of adequate size and making electric connections including one run (FRLS) PVC insulated single core copper conductor cable 4.0 Sqmm as a earth continuity conductor(green colour) in and including in non metallic rigid PVC conduit, including cutting chases in brick wall, replastering and making good to match the existing specifications complete all as per specified and directed. Note :- (i) Rates are deemed to be included chases of conduit and sinking for boxes cutting and making holes in wall/floor for passing in or through conduit (ii) Two run of 4.00 sqmm single core (FRLS) PVC insulated copper conductor cable one run of 4.0 sqmm copper conductor cable (FRLS) as a earth lead and one run of PVC conduit of suitable size will be measured as a one unit.

S&F in replacement sheet metal powder enclosure powder coated versatile double door single pole and neutral (SPN) 415Volt, 50Hz AC supply for 08 way. fitted distribution board for MCB provisions for one no incoming MCB SPN and outgoing MCB SP AC 230 VOLTS 50 hzac SUPPLY HAVING PROTECTION ip-43,IK-09 with copper bus bar rated 200amps, neutral link , earth bar complete all as specified and directed.

S&F in replacement MCBs single pole and neutral (SPN)/isolator 40 Amps with 10 KA breaking capacity of 'C' series in distribution boards complete all as specified and directed.

S&F in replacement MCBs single pole 6-32 Amps with 10 KA breaking capacity of 'C' series in distribution boards complete all as specified and directed.

Supply and fixing single pole and neutral enclousre with a two pin and earth plug and socket complete with one single pole 230 volt MCB 20 amps complete all as specified and directed.

Supply and fixing ceiling fan with blade, down rod, electronic regulator and accessories, 230 Volt, 1200mm sweep, min air delivery 210 CFM with service value 6.00 BEE, five star rated with brushless direct current motor (BLDC) complete all as specified and directed..

Supply ,fixing and testing water heater storage type with multifunctional safety valve,electric operated 230 V,single phase complete including one no of heating element,automatic thermal cut out,flusible plug,anti vacum ,built in presser release valve,thermostat,rust proof powder coated body,indicator lamps and all safety advices as per IS capacity 25 litres, 5 star rating including suitable and making good disturbed surface complete all as specified and directed

Supply and fix LED lamp 9 watt , complete all as specified and directed.

M&L earthing complete with galvanised steel earth plate eletrode 600mmx600mm and 6mm thick buried directly in ground earth pit not less than 2.25mtr deep below normal ground level with top edges, of the plate not less than 1.5m below normal ground level, connected to the galvanised iron earth lead 32mmx6mm (GI Strip) size, by means of nut, bolts, check nuts and washers of galvanised iron and 32mmx6 mm earth lead protected by provision of GI medium grade pipe 40 mm bore including provision of aggregates with 40 mm thick cover of RCC (1:2:4) , reinforced with XPM (weight not less than 4 kg per sqm) and frame of angle iron 40mmx40mmx3mm and with 6 mm dia MS bar handle made to shape, GI light grade 20mm bore pipe of suitable length for watering perforated at bottom placed on top edge of earth plate, common salt and charcoal filling, funnel, wire mesh and earth work in any type of soil, returning filling in, removing soil to a distance not exceeding 50 mtr all as per plate No 3 of SSR 2009 Part-I and connecting to feeder pillers and Transformer all as specified including testing on completion complete all as specified and directed. (Note: The rate quoted include cost of min 7.5 metre earthing wire .)

M&L for Earthing complete with galvanized steel earth plate electrode 600x600x6mm thick burried directly in ground (Earth pit not less than 2.25 Metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level, connected to galvanized earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No.5 of SSR Part-I (2009) including filling of charcoal dust , common salt all around Earth plate upto 150mm, 20mm bore GI medium grade watering pipe, 15 mm bore light grade earth lead protection pipe upto main board, funnel with wiremesh, 40mm thick RCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregate reinforced with suitable handle and angle iron frame and necessary excavation and earth work in any type of soil etc. complete all as specified and as directed including testing on completion. (Note: The rate quoted include cost of min 7.5 metre earthing wire .)

Supply,laying and testing cable XLPE insulated ,screened PVC bedded galvanised steel strip or wire armoured,electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 16 Sqmm 2 core complete all as specified and directed..

Supply,laying and testing cable XLPE insulated ,screened PVC bedded galvanised steel strip or wire armoured,electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 16 Sqmm 4 core complete all as specified and directed..

Supply,laying and testing cable XLPE insulated ,screened PVC bedded galvanised steel strip or wire armoured,electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 25 Sqmm 3.5 core complete all as specified and directed..

Supply,laying and testing cable XLPE insulated ,screened PVC bedded galvanised steel strip or wire armoured,electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 50 Sqmm 3.5 core complete all as specified and directed..

Supply,laying and testing cable XLPE insulated ,screened PVC bedded galvanised steel strip or wire armoured,electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 70 Sqmm 3.5 core complete all as specified and directed..

Supply and fix in repair for submersible cable flat copper conductor 16 sq mm, 3 core, 1100 volts complete all as specified and directed..

Supply and fix replacement of three core copper conductor multi-stranded type PVC insulated and sheathed of 2.5 sqmm, 1100 volts grade and connected to the street light from over head line or Junction boxes complete all as specified and directed..

Supply and fix for DWC high density polythylene pipes having dia 63/50 as per site requirement having corrugation on the wall and plain surface on the wall conforming to IS : 14930 (Part-I & II) for protection of underground cable laid along pole/along wall/in PCC on GL/roof and including all fitting as required complete all as specified and directed.

Supply, installation, commissioning and testing of submersible copper wounded motor with pump set, water lubricated and water cooled with stream line non return valve suitable to discharge not less than 650 LPM and not less than 150 mtr head directly coupled with and including squerrel cage induction motor of capacity not less than 40 HP capacity suitable for three phase 415 + 7.5% volts, 50 Hz AC supply. Note:- (1) Contractor shall take proper precautions while lifting out and removing pump set and motor bore well so as to avoid any damage to column pipe and submersible cable. All necessary T&P and equipments required for lifting out pump set etc shall be arranged by the contractor at his own cost. (2) The cost of lowering of pump set and motor is deemed to be included in the quoted rate for the same. (3) Make and model/size of the pump and motor shall be as per CA provision and as approved by the GE on production of the catalogue/literature of manufacturer by the contractor. Pump and motor should be of same make. (4) Pump set to be lowered to the minimum depth approx 100 mtr or as directed. (5) The quoted rate by the contractor for the above item shall be deemed inclusive cost of assembling & connecting the submersible motor pump set to column pipe and making necessary connection and testing including reconnecting water supply line connections. (6) Old materials retrived from site shall be deposited to MES store yard by contractor.

Supply, installation, testing and commissioning Silent Diesel engine driven trailer mounted generating set complete with accoustic enclosure CPCB approved and control system for 62.5 KVA output at site ie at MSL after de rating Ac 415 Vollts, 50 C/S, 3 phase 4 wire directly coupled complete with self starting system with and including accessories, equipment control panel etc as detailed below:- (a) Diesel Engine :- Diesel engine water/coolent cooled and electric start suitable to drive mentioned alternator independently, coupled directly through coupling , Four cylinder 4 stroke, cold starting, diesel engine developing 90 BHP at 1500 RPM industrial type as per BS:5514 or IS-10001/10002 suitable to requlate speed of DG set from no load to full load complete with fuel tank of capacity as per manufacture's recommendations, fuel line exhaust pipe and with support and silencermufflers etc for contuious operation and standard accessories, sump pre heaters etc all as specified and directed. Air Intake System (i) Air intake mainfold, (ii) Dry type air cleaner, (iii) Vaccum indicator Exhaust System (i) Turbo charger, (ii) Flexible connection, (iii) Exhaust mainfold, (iv) Residential silencer Coolent System (i) Engine water pump, (ii) Radiator, (iii) Coolant additive concentrate Lubrication System (i) Oil pan, (ii) Engine mounted lube oil pump, (iii) Full flow spin-on lube oil filter Fuel System (i) Electronic Governor, (ii) 12 V DC Solenoid coil, (iii) Dual fuel filter system Starting System (i) 12 Volt DC electric starter (ii) 12 Volt DC battery charging alternator

Supply, installation, testing and commissioning Silent Diesel engine driven trailer mounted generating set complete with accoustic enclosure CPCB approved and control system for 30 KVA output at site ie at MSL after de rating Ac 415 Vollts, 50 C/S, 3 phase 4 wire directly coupled complete with self starting system with and including accessories, equipment control panel etc as detailed below:- (a) Diesel Engine :- Diesel engine water/coolent cooled and electric start suitable to drive mentioned alternator independently, coupled directly through coupling , three cylinder 4 stroke, cold starting, diesel engine developing 44 BHP at 1500 RPM industrial type as per BS:5514 or IS-10001/10002 suitable to requlate speed of DG set from no load to full load complete with fuel tank of capacity as per manufacture's recommendations, fuel line exhaust pipe and with support and silencermufflers etc for contuious operation and standard accessories, sump pre heaters etc all as specified and directed. Air Intake System (i) Air intake mainfold, (ii) Dry type air cleaner, (iii) Vaccum indicator Exhaust System (i) Turbo charger, (ii) Flexible connection, (iii) Exhaust mainfold, (iv) Residential silencer Coolent System (i) Engine water pump, (ii) Radiator, (iii) Coolant additive concentrate Lubrication System (i) Oil pan, (ii) Engine mounted lube oil pump, (iii) Full flow spin-on lube oil filter Fuel System (i) Electronic Governor, (ii) 12 V DC Solenoid coil, (iii) Dual fuel filter system Starting System (i) 12 Volt DC electric starter (ii) 12 Volt DC battery charging alternator

Supply and fix off load changeover of capacity 63 amps, FP, 415 volt complete all as specified and directed.

Standard engineers

Ashoka Engineers

Ms International Engineers

SATISH AND CO