Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹73.4 L
EMD Value
₹1.5 L
Closing Date
21 Jun 2024, 9:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Karnataka Power Corporation Limited
SRINATH CAHLUVADI
As per bid document
KPCL/2023-24/PS/WORK_INDENT1351/CALL-2
KPCL/2023-24/PS/WORK_INDENT1351/CALL-2
Open
Power stations
Two Tender Document System(Two Cover)
KPCL Superintending Engineer MM one Office RTPS Raichur
4 documents required · 0 mandatory · 4 optional
Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs)
Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender)
Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction)
Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)
Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period)
Total value of civl engineering works executed and payments received in the last five years (year-wise)
List of existing commitments and ongoing works
List of works for which tenders already submitted
Banker Details for reference
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
List of Financial Resources with Certificates
The intending bidder in his name should have achieved an average annual financial turnover of Rs, 73.43 Lakhs, in at least two financial years during the last five years (2018-19, 2019-20, 2020-21, 2021-22 & 2022-23). As a proof of this the bidder shall upload the certified copy of the Profit and Loss account or Turnover certificate duly certified by the charted accountant. (Work done of previous years shall be given weightage of 10% per year to bring them to the present price level of the financial year in which the tenders are invited)
The intending bidder should have satisfactorily completed, as a prime contractor at least one similar work such as Supply, Servicing & Reconditioning of Kirloskar / KG Khosla Reciprocating Air Compressors of value not less than Rs, 36.71 Lakhs in the last five years (2018-19, 2019-20, 2020-21, 2021-22 & 2022-23) in any thermal power stations of capacity not less than 210MW. As proof of this, the bidder shall upload single work order and corresponding work done certificate issued by competent authority. (Work done of previous years shall be given weightage of 10% per year to bring them to the present price level of the financial year in which the tenders are invited)
The bidders who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than total estimated cost of the work. The available tender capacity will be calculated as under- Assessed available tender capacity - A x N x 2.5 - B Where, A - Maximum value of work executed in any one year during the last five years taking it to account the completed as well as works in progress. N - Number of years prescribed for completion of the works for which tenders are invited. B - Value of existing commitment and on-going works to be completed during the next one years. Bidder shall upload statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed duly Self-declared by the bidder or countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent.
₹1,840
₹1.5 L
14 Jun 2024
14 Jun 2024
22 Jun 2024
19 Jun 2024
Suppy, Servicing & Reconditioning of Compressors, in Units 5, 6, 7 & 8 (2024-25)-SSRC.
Compressor Crank Case & Main bearing inspection and replacement of worn out spares
Inspection of compressor suction & discharge valves and replacement of worn out spares
Lapping of released compressor valves
Inspection of HP piston assy and replacement of worn out spares
Inspection of LP piston assy and replacement of worn out spares
Replacement of HP/LP piston gland packing
Replacement of oil scraper ring of HP/LP piston
Cleaning of compressor suction air filters
Compressor cooling water flushing
Replacements of compressor'V' belts
Compressor V-belt alignment
Overhauling of compressors NRV
Replacement of compressor NRV
Replacement of Compressor HP/LP cylinder /inner cover
Replacement of Compressor cross head /cross head guide assy.
Replacement of oil seal of Compressor gear pump
Servicing /cleaning of moisture traps
Cleaning /replacement of oil filters
Overhauling of Compressor inter/after cooler assy & hydraulic testing
Attending of small welding cracks in pipes and other welding works
Re-routing / replacement of pipe lines,bends,reducers, valves etc., of size up to 200 NB & repair work in compressor area.
Air drier: 4-way valve and actuator servicing.
Overhauling of Air Drier system,and connected auxillaries .
Changing of Activated allumina in the Air drier tower.
Providing and Painting of inner surface of reciever tank and Pulsating vessels with Anti-corrosive paint
Servicing of Valves around receivers and compressors.
Demister filter cleaning
Inspection and Attending oil ferrule leakage inside the crank case.
Replacement of gaskets of flanges size up 100NB
Replacement of gaskets of flanges size 100NB and above.
Major & Minor Overhauling - for TBTD-PM and RM Compressor.
Engineering Diploma Holder
Replacement of intermediate plate or LP/HP Cylinders.
Replacement of fly wheel of compressor
Inspection/Replacement /alignment of HP/LP piston assemblies of compressor
Replacement of compressor motor sliding rails
Re-Sleeving of TBTD-PM HP Cylinder
Supply of optional spare : Main Bearing for TBTD-PM
Supply of optional spare :Big end Bearing - for TBTD-PM
Supply of optional spare :Godzen Pin - for TBTD-PM
Supply of optional spare :Connecting Rod Bolt - for TBTD-PM
Supply of optional spare :Lock wire - for TBTD-PM
Supply of optional spare :One way clutch assembly - for TBTD-PM
Supply of optional spare :Oil Filter Element - for TBTD-PM
Supply of optional spare :Strainer - for TBTD-PM
Supply of optional spare :LP Guide/Wear Ring - for TBTD-PM
Supply of optional spare :LP Piston/Compression Ring - for TBTD-PM
Supply of optional spare :HP Piston/Compression Ring - for TBTD-PM
Supply of optional spare :HP Guide/Wear Ring - for TBTD-PM
Supply of optional spare :Lock washer for piston rod nut - for TBTD-PM
Supply of optional spare :Copper packing HP suc/dly valve - for TBTD-PM
Supply of optional spare :Copper packing LP suc/dly valve - for TBTD-PM
Supply of optional spare :Gland packing - for TBTD-PM
Supply of optional spare :Oil wipering ring - for TBTD-PM
Supply of optional spare :U/L piston O Ring - for TBTD-PM
Supply of optional spare :SUC valve holder HP - for TBTD-PM
Supply of optional spare :Dly valve holder HP - for TBTD-PM
Supply of optional spare :Pressure Breaker - for TBTD-PM
Supply of optional spare :Oil seal for for fly wheel side - for TBTD-PM
Supply of optional spare :Connecting rod bushes - for TBTD-PM
Supply of optional spare :Cross head bush - for TBTD-PM
Supply of optional spare :Intercooler o ring - for TBTD-PM
Supply of optional spare :after cooler o ring - for TBTD-PM
Supply of optional spare :Spare Valve Assembly for Non Return Valve - for TBTD-PM
Supply of optional spare :LP Cylinder suction valve unloader piston's Teflon ring with "O" ring - for TBTD-PM
Supply of optional spare :HP Cylinder water gasket/packing (HP CYLINDER TO I/O COVER ) - for TBTD-PM
Supply of optional spare :Valve Cover O ring HP- for TBTD-PM
Supply of optional spare :O ring for valve holder LP - for TBTD-PM
Supply of optional spare :Thrust Watcher - for TBTD-PM
Supply of optional spare :Oil seal for Oil pump - for TBTD-PM
Supply of optional spare :Main Bearing - for TBTD-RM
Supply of optional spare :Big end Bearing - for TBTD-RM
Supply of optional spare :Bearing Lock - for TBTD-RM
Supply of optional spare :Godzen Pin - for TBTD-RM
Supply of optional spare :Connecting Rod Bolt - for TBTD-RM
Supply of optional spare :Lock wire - for TBTD-RM
Supply of optional spare :One way clutch assembly - for TBTD-RM
Supply of optional spare :Oil Filter Element - for TBTD-RM
Supply of optional spare :Strainer - for TBTD-RM
Supply of optional spare :LP Guide/Wear Ring - for TBTD-RM
Supply of optional spare :LP Piston/ Compression Ring - for TBTD-RM
Supply of optional spare :HP Piston/ Compression Ring - for TBTD-RM
Supply of optional spare :HP Guide/ Wear Ring - for TBTD-RM
Supply of optional spare :Lock washer for piston rod nut - for TBTD-RM
Supply of optional spare :HP valve Assembly delivery - for TBTD-RM
Supply of optional spare :HP Suction valve assembly with fork and spring - for TBTD-RM
Supply of optional spare :LP Delivery valve assembly - for TBTD-RM
Supply of optional spare :LP Suction valve assembly complete - for TBTD-RM
Supply of optional spare :Copper packing HP suc/dly valve - for TBTD-RM
Supply of optional spare :Copper packing LP suc/dly valve - for TBTD-RM
Supply of optional spare :Gland packing - for TBTD-RM
Supply of optional spare :Oil wipering ring - for TBTD-RM
Supply of optional spare :U/L piston O Ring - for TBTD-RM
Supply of optional spare :SUC valve holder HP - for TBTD-RM
Supply of optional spare :Dly valve holder HP - for TBTD-RM
Supply of optional spare :Pressure Breaker - for TBTD-RM
Supply of optional spare :Oil seal for for fly wheel side - for TBTD-RM
Supply of optional spare :Connecting rod bushes - for TBTD-RM
Supply of optional spare :Cross head bush - for TBTD-RM
Supply of optional spare :Intercooler o ring - for TBTD-RM
Supply of optional spare :after cooler o ring - for TBTD-RM
Supply of optional spare :Valve Cover O ring HP - for TBTD-RM
Supply of optional spare :O ring for valve holder LP - for TBTD-RM
Supply of optional spare :Thrust Watcher - for TBTD-RM
Supply of optional spare :Oil seal for Oil pump - for TBTD-RM
Consumables ( As per annexure-A)
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Bid Doc SSRC.doc
Tender Document • 0.42 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .