Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹12.9 LAdmitted-Finance | L1 | Admitted-Finance | |
| 2 | L2₹13.4 L+₹51,200 (3.97%)Admitted-Finance | L2 | Admitted-Finance |
| Sl No | Description | Qty | Unit | M/S.KSM Engineering L2 | M/s. KSR Enterprises L1 |
|---|---|---|---|---|---|
| 1.00 | Charges for Providing support for coal pipe above the mill, dismantling and lowering of 1No. MDV from 10.853 mtrs to mill floor at 4.75 mtrs for inspection of internals, overhauling of MDV and lifting of either new or repaired or modified one no. Mill Discharge Valve to positioning and coupling with coal pipe, replacing the rubber gasket and releasing of supports including cost of consumables and hire charges for T&P's. | 12 | nos | 18,600 ₹2,23,200 | 17,900 ₹2,14,800 Lowest |
| 2.00 | Charges for Dismantling and lowering of 1No. Multiple Port Outlet to mill floor from 9.389 mtrs to mill floor at 4.75 mtrs, inspection of internal and renewing the worn-out components if necessary and lifting of either new or repaired MPO to the position and coupling with mill discharge valve, including cost of consumables and hire charges for T&P's. | 12 | nos | 6,800 ₹81,600 | 6,200 ₹74,400 Lowest |
| 3.00 | Charges for Dismantling and lowering the Distant piece along with Orifice for access to dismantling MDV & MPO works and refixing the released distant piece along with Orifice on MDV, aligning, positioning including the cost of consumables and hire charges for T&P's. | 12 | nos | 10,900 ₹1,30,800 | 10,300 ₹1,23,600 Lowest |
| 4.00 | Charges for removal of Mill Outlet Elbow by removing the grooved couplings at both ends of mill outlet elbow by providing temporary supports to arrest the coal pipe for removal & lowering of mill outlet elbow from it's position for inspection, patch welding if necessary and Changing of grooved coupling gasket, lifting the elbow into position, then align the mill outlet elbow with coal pipe including cutting, welding and tightening the grooved couplings at the ends, removal of temporary supports and normalizing, including cost of consumables and hire charges for T&P's. | 12 | nos | 27,600 ₹3,31,200 | 27,000 ₹3,24,000 Lowest |
| 5.00 | Charges for rectification / replacement of Transition Chute by fabrication of walkway around transition chute, dismantling and removal of wornout transfer chute from 22 mtr to ‘0’ mtr, (under dismantled condition of Centre Coal Feed Pipe, MOEs, MDVs, MPOs during Overhaul) transportation, leading, lifting, positioning and refixing the new / reconditioned transfer chute, including the hire charges for T&Ps and cost of consumables. | 2 | nos | 87,300 ₹1,74,600 | 86,900 ₹1,73,800 Lowest |
| 6.00 | Charges for Replacement of worn-out centre coal feed pipe (Type I) by erection of necessary scaffolding arrangements at higher elevation above Mill, dismantling the worn-out coal feed pipe from transfer chute, lowering it to ground floor, transporting, leading, lifting, positioning, erecting and assembling the new / reconditioned or released center coal feed pipe (Type I) with transfer chute, including hire charges for T&P's and cost of Consumables. | 2 | nos | 1,15,000 ₹2,30,000 | 1,10,000 ₹2,20,000 Lowest |
| 7.00 | Charges for Replacement of worn-out centre coal feed pipe (Type II) by dismantling the Dresser coupling, dismantling the fixing bolts on Mill top, removing and lowering the Center coal feed pipe (Type II) to the Mill floor, transportation, leading, lifting, erecting and fixing the new / reconditioned or released centre coal feed pipe (Type II) on the Mill top, assembling the Dresser coupling, including the Hire charges for T&P's, cost of consumables. | 2 | nos | 51,200 ₹1,02,400 | 50,500 ₹1,01,000 Lowest |
| 8.00 | Charges for Overhauling of Classifier assembly by removal of Classifier spherical bearing links, checking if necessary retapping the sockets, replacing of worn out studs and nuts and synchronising the operation of Classifier Control Vanes of the Mill, including the cost of Consumables and hire charges for T&P's. | 3 | nos | 22,000 ₹66,000 | 19,000 ₹57,000 Lowest |
Tender Value
Refer Docs
EMD Value
₹10,800
Closing Date
28 Sept 2026, 2:00 pmClosed
SE M1
NCTPS II
MPM Dn. - Unit-II - Mills 2F, 2G 2H Overhauling of MDVS, MPOS, classifier assembly, Mill outlet elbows and distance piece along with orifice rectification replacement of Mills 2F 2G worn-out transition chute and feeder outlet chute during Ann
2026_EB_706283_1
NCTPS_II_UII_Spec_103_26_27
Open Tender
Maintenance Works
Works
NCTPS II
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹10,800
Yes
7 Oct 2026
21 Sept 2026
29 Sept 2026
21 Sept 2026
28 Sept 2026
21 Sept 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Charges for Providing support for coal pipe above the mill, dismantling and lowering of 1No. MDV from 10.853 mtrs to mill floor at 4.75 mtrs for inspection of internals, overhauling of MDV and lifting of either new or repaired or modified one no. Mill Discharge Valve to positioning and coupling with coal pipe, replacing the rubber gasket and releasing of supports including cost of consumables and hire charges for T&P's. | 12 | nos | - | - |
| 2 | Charges for Dismantling and lowering of 1No. Multiple Port Outlet to mill floor from 9.389 mtrs to mill floor at 4.75 mtrs, inspection of internal and renewing the worn-out components if necessary and lifting of either new or repaired MPO to the position and coupling with mill discharge valve, including cost of consumables and hire charges for T&P's. | 12 | nos | - | - |
| 3 | Charges for Dismantling and lowering the Distant piece along with Orifice for access to dismantling MDV & MPO works and refixing the released distant piece along with Orifice on MDV, aligning, positioning including the cost of consumables and hire charges for T&P's. | 12 | nos | - | - |
| 4 | Charges for removal of Mill Outlet Elbow by removing the grooved couplings at both ends of mill outlet elbow by providing temporary supports to arrest the coal pipe for removal & lowering of mill outlet elbow from it's position for inspection, patch welding if necessary and Changing of grooved coupling gasket, lifting the elbow into position, then align the mill outlet elbow with coal pipe including cutting, welding and tightening the grooved couplings at the ends, removal of temporary supports and normalizing, including cost of consumables and hire charges for T&P's. | 12 | nos | - | - |
| 5 | Charges for rectification / replacement of Transition Chute by fabrication of walkway around transition chute, dismantling and removal of wornout transfer chute from 22 mtr to ‘0’ mtr, (under dismantled condition of Centre Coal Feed Pipe, MOEs, MDVs, MPOs during Overhaul) transportation, leading, lifting, positioning and refixing the new / reconditioned transfer chute, including the hire charges for T&Ps and cost of consumables. | 2 | nos | - | - |
| 6 | Charges for Replacement of worn-out centre coal feed pipe (Type I) by erection of necessary scaffolding arrangements at higher elevation above Mill, dismantling the worn-out coal feed pipe from transfer chute, lowering it to ground floor, transporting, leading, lifting, positioning, erecting and assembling the new / reconditioned or released center coal feed pipe (Type I) with transfer chute, including hire charges for T&P's and cost of Consumables. | 2 | nos | - | - |
| 7 | Charges for Replacement of worn-out centre coal feed pipe (Type II) by dismantling the Dresser coupling, dismantling the fixing bolts on Mill top, removing and lowering the Center coal feed pipe (Type II) to the Mill floor, transportation, leading, lifting, erecting and fixing the new / reconditioned or released centre coal feed pipe (Type II) on the Mill top, assembling the Dresser coupling, including the Hire charges for T&P's, cost of consumables. | 2 | nos | - | - |
| 8 | Charges for Overhauling of Classifier assembly by removal of Classifier spherical bearing links, checking if necessary retapping the sockets, replacing of worn out studs and nuts and synchronising the operation of Classifier Control Vanes of the Mill, including the cost of Consumables and hire charges for T&P's. | 3 | nos | - | - |
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.84 MB
BOQ_848902.xls
BOQ • 0.28 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .