Construction of New Process Shop at HAL Korwa.

Hindustan Aeronautics Limited

(Avionics Division, Korwa)

DEPARTMENT OF CIVIL ENGINEERING

CHECK LIST FOR SUBMITTING E-TENDER

NAME OF WORK:- Construction of New Process Shop at HAL Korwa.

NIT No.- HAL/KWD/Civil/14 of 26-27 Date: 14.08.2026

Name of Contractor:

S. N. Essential Criteria /Desirable criteria. Please write submitted or not submitted below

1 ANNUAL TURN OVER:- Average Annual Turnover during the last 3 years, ending 31st March-2026 (Provisional certificate is acceptable) of previous financial year, should be at least 30% of the approximate estimated amount put to tender. The Bidder should upload profit & loss statement for the last three years duly certified by Chartered accountant with UDIN. (Supported with Income Tax return, Balance Sheet etc.).

2 EMD (As per NIT)

3 SOLVENCY CERTIFICATE- Solvency certificate from any nationalized or scheduled bank i.e.minimum 40% of Estimated value.

4 EXPERIENCE: Experience of having successfully completed similar works during last 7 years ending last day of month previous to the one in which applications are invited should be either of the following.

5 Three similar completed works each costing not less than the amount equal to 40% of the approx estimated amount. OR

i) Two similar completed works each costing not less than the amount equal to 50% of the approx estimated amount. OR

ii) One similar completed work costing not less than the amount equal to 80% of the approx estimated amount.

6 BID CAPACITY:- The Bid Capacity shall be worked out for the works costing above Rs. 100.00 Lakhs and above as one of their eligibility criteria

7 LICENSE: License for execution of Electrical works from the concerned authorities / organizations/ bodies.

8 Proof of GST registration

9 Copy of PAN/ GIR No. Registration Certificate issued by Income Tax Authority.

10 Constitution and legal status.( Partnership/ Proprietary)

11 Details of Bank name , brance code, address, IFS code and Account number on letter head.Please attach scanned copy of blank cheque for reference.

12 The rate quoted shall be inclusive of all taxes. Tenderers are required to make the DATA ENTRY of the item rate in figures only and rate in words will be automatically generated.

13 Tenderers are required to attach Format of undertaking as per Annexure I & J

14 Signature done, wherever required.

Abstract Estimate

Name of Work : Term contract for Civil Maintenance works in Township at HAL Korwa. 2017-18

Time Required for

(a) Conclusion of contract- 03month

(b) Completion of works- 12 Months

Sl. No. Particulars Amount In Rs. Reference

1 Term contract for civil maintenance works in township for repair & maintenance of buildings, water supply lines, sanitary fittings, approach roads, floors, pavings etc and allied civil works required for completion of work.

a Civil Works #REF! [Annexure- D-1]

2 Add 5% towards contigencies #REF!

Grand Total #REF!

Say ` 14.07 Lakhs

Sr. Manager (Works ) ATA

(Satyendra K Maurya) (SK Chaudhury)

Name of Work : Term contract for Civil Maintenance works in Township at HAL Korwa. 2017-18

1 SCHEDULE - "A" (PART-A) #REF!

2 SCHEDULE - "A" (PART-B) #REF!

Contingency @ 5% #REF!

Grand total #REF!

SAY : 14.07 Lakhs

HINDUSTAN AERONAUTICS LIMITED

AVIONICS DIVISION, KORWA

POST OFFICE: HAL, TEH: AMETHI

DISTT: AMETHI (UP) - 22 74 12

Name of Work:- Construction of New Process Shop at HAL Korwa

NIT No.- HAL/KWD/Civil/14 of 26-27

Note:- Tenderers are requested to quote their offer in percentage either above or below on CPWD DSR-2023 Volume I & II (Rates). All relevant items shall be executed as per CPWD specifications and CPWD DSR 2023, materials specifications shall be as mentioned in the Bill of quantities and as per the List of approved make/brand as provided in tender document and as per the direction of Engineer-in-charge.

NAME OF AGENCY (To be filled in highlighted box ) :

Sl. No. Description of item Qty. Unit Rate derived excluding GST @18% Amount excluding GST @18% in (Rs.)

1.1 Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. for All kind soils all complete as per specification and direction of EIC. 585.00 Sqm 25.27 14783.54

1.2 Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared all complete as per specification and direction of EIC. 585.00 Sqm 25.27 14783.54

1.3 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m for All kinds of soil all complete as per specification and direction of EIC. 462.00 Cum 131.35 60683.70

1.4 Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor: With Chlorpyriphos/Lindane E.C. 20% with 1% concentration all complete as per specification and direction of EIC. 409.00 Sqm 229.44 93839.73

1.5 Filling available excavated earth (excluding rock) in trenches ,plinth,sides of foundation etc . in layers not exceeding 20cm in depth ,consolidating each deposited layer by ramming and watering lead upto 50m and lift upto 1.5m all complete as per specification and direction of EIC. 266.00 Cum 145.04 38580.64

1.6 Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. all complete as per specification and direction of EIC. 108.00 Cum 518.37 55983.96

1.7 Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing etc. all complete as per specification and direction of EIC. 200.00 Cum 1571.58 314315.00

2.1 Providing mixing and placing Plain Cement Concrete : 1:4:8 (1 Cement : 4 coarse sand (zone-Ill) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) in foundation, under floors or any other similar description of works eg. drains, pipe lines bedding layers, manholes, road, chambers, duct etc with mechanical mixing including form work, side shuttering, compaction, curing also including , materials, labour, cartage, T&P etc, required for proper completion of the work as per specification and direction of E.I.C. 124.00 Cum 5040.88 625069.12

2.2 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone- III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth etc. all complete as per specification and direction of EIC. 90.00 Sqm 554.48 49903.38

2.3 Providing and fixing glass strips (40x4)mm in joints of terrazo/ cement concrete floors, all complete including , materials, labour, cartage, T&P etc, required for proper completion of the work as per specification and direction of E.I.C. 81.00 Meter 67.90 5499.50

3.1 Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete including all complete as per specification and direction of EIC. (All works upto plinth level Concrete of M25 grade with minimum cement content of 330 kg /cum

Up to plinth level 89.00 Cum 7033.52 625982.84

3.2 Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete including , materials, labour, cartage, T&P etc, required for proper completion of the work as per specification and direction of E.I.C. All works above plinth level upto floor V level .Concrete of M25 grade with minimum cement content of 330 kg /cum

R C C COLUMN 32.00 Cum 7296.70 233494.27

3.3 Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete including , materials, labour, cartage, T&P etc, required for proper completion of the work as per specification and direction of E.I.C. All works above plinth level upto floor V level .Concrete of M25 grade with minimum cement content of 330 kg /cum

3.4 Providing, fabricating, fixing and removing Form work / shuttering of side of concrete in required shape and size, with true line & plumb etc. with plywood / MS plates shuttering including oiling of the top surfaces of shuttering , all supports with MS or wooden logs including all braces, struts, balli, etc, including working scaffoldings, ladders, gangways, use & wastage of timber, including removal of formwork & shuttering after the stripping period as described in IS:456-2000 , etc. including all labour, material, T&P, transportation, wastage and other required fixture for proper completion of work as per specification and direction of E.I.C.

(a) Footings 139.00 Sqm 290.19 40336.55

(c) Lintels, beams, plinth beams, girders, bressumers and cantilevers 580.00 Sqm 544.94 316062.88

(d) Suspended floors, roofs, landings, balconies and access platform 1008.00 Sqm 686.17 691654.32

(e) Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc., including cost of de-shuttering and decentering at all levels, over a height of 3.5 m, for every additional height of 1 metre or part thereof (Plan area to be measured).Suspended floors, roofs, landings, beams and balconies (Plan area to be measured) including all complete works as per specification and direction of EIC. 1035.00 Sqm 284.38 294335.37

3.5 Providing, laying and fixing TMT reinforcement bars conforming to IS-1786-1985, for any diameter of TISCON / SAIL/ RINL/Gallant or any other approved make for all type of R.C.C works including straighting, cut to length, bend to shape required, cranking, bending spirally or hooping, spacers / chairs, wastages and binding with mild steel wires (annealed) not less than 0.90 mm diameter or securing with clips so that placing and ramming of concrete will not displace it (RCC) also including cost of all labour, material, cartage, T&P etc. all complete at all height as per drawing, specification and direction of E.I.C 390.00 Qtls 7980.90 3112551.00

3.6 Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 12.5mm nominal size derived from natural sources) including cost of all labour, material, cartage, T&P etc. all complete at all height as per drawing, specification and direction of E.I.C. 43.00 Sqm 304.03 13073.25

3.7 Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer’s specification all complete works as per specification and direction of EIC. 11.00 Per 50 kg cement bag 13.69 150.59

3.8 Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil including cost of all labour, material, cartage, T&P etc. all complete at all height as per drawing, specification and direction of E.I.C. 43.00 Sqm 108.15 4650.49

4.1 Providing and laying Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in cement mortar 1:6 ( 1 cement : 6 coarse sand) in foundation and plinth, drains, manholes, chambers, ducts etc or any description of similar works, including necessary cutting of bricks as required , wastages,straight or curved including cost of all material, labour, cartage, T&P, curing, scaffolding, wastage etc. required for proper completion of work and as per specification and direction of EIC. 75.00 Cum 5277.87 395839.88

4.2 Providing and laying Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in cement mortar 1:6 ( 1 cement : 6 coarse sand) in superstructure above plinth level upto floor V level or any description of similar works, including necessary cutting of bricks as required , wastages,straight or curved including cost of all material, labour, cartage, T&P, curing, scaffolding, wastage etc. required for proper completion of work and as per specification and direction of EIC. 127.26 Cum 6738.40 857529.17

4.3 Providing and laying Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in cement mortar 1:4 ( 1 cement : 4 coarse sand) in superstructure, above plinth upto floor V level including necessary cutting of bricks as required , wastages,straight or curved, work up to any height or depth including cost of scaffolding , raking out joints up to 1 cm depth as the work proceeds, including all material, labour, cartage, T&P, curing, scaffolding, wastage etc. required for proper completion of work and as per specification and direction of EIC. 43.00 Sqm 831.61 35759.32

4.4 Extra for providing and placing in position 2 Nos. 6mm dia. M.S.bars at every third course of half brick masonry (with F.P.S.bricks) including all material, labour, cartage, T&P, curing, scaffolding, wastage etc. required for proper completion of work and as per specification and direction of EIC. 43.00 Sqm 77.55 3334.74

5 DOOR, WINDOW & VENTILATORS ETC.

5.1 Providing and fixing M.S. Tubular frames for doors and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer including all material, labour, cartage, T&P, curing, scaffolding, wastage etc. required for proper completion of work and as per specification and direction of EIC. 2430.00 kg 144.45 351008.64

5.2 Providing , fabricating and fixing M.S. frames for doors, windows and ventilators, MS grill, grating, railing made out from MS square sections, M.S. angles and M.S. flats as per design, electrically welded and fixed in chowkhats with screws or treads of steps and R.C.C. balcony slabs in cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 stone aggregate 12.5 mm nominal size) including labour, material, cartage & T&P, grinding etc. all complete, as per drawing, specification and direction of EIC. 40.77 kg 96.98 3953.75

5.3 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. fixed to steel windows by welding including priming coat with approved steel primer including all labour, material, T&P, transportation, wastage for proper completion of work as per specification and direction of EIC. 1084.00 kg 162.13 175753.26

5.4 Providing and fixing hand rail (M.S. tube) of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer including all labour, material, T&P, transportation, wastage for proper completion of work as per specification and direction of EIC. 104.00 kg 145.63 15145.73

5.5 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws including all labour, material, T&P, transportation, wastage for proper completion of work as per specification and direction of EIC. 24.00 Sqm 1770.56 42493.46

5.6 Providing and fixing fly proof galvanized M.S. wire auge(Mosquito jali) to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete With 12 mm mild steel U beading including all labour, material, T&P, transportation, wastage for proper completion of work as per specification and direction of EIC. 31.00 Sqm 695.01 21545.25

5.7 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. all complete including all labour, material, T&P, transportation for proper completion of work as per specification and direction of EIC. 9.00 Nos 832.39 7491.50

5.8 Providing and fixing 125 mm aluminium handles, ISI marked, anodised transparent or dyed to required colour or shade, with necessary screws etc. all complete as per specification and direction of EIC. 32.00 Nos 49.03 1568.80

5.8 Providing and fixing aluminium sliding door bolts 250X16mm, ISI marked anodised transparent or dyed to required colour or shade, with nuts and screws etc. all complete as per specification and direction of EIC. 20.00 Nos 192.84 3856.88

5.9 Providing and fixing aluminium tower bolts, ISI arked, anodised transparent or dyed to required colour or shade, with necessary screws etc. all complete as per specification and direction of EIC.

5.1 Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with 4 mm thick glass panes all complete including labour, material, cartage, T&P etc. as per specification and direction of EIC. 44.00 Sqm 787.84 34665.00

5.11 Providing and fixing aluminium hanging floor door single rubber stopper ISI marked anodised transparent or dyed to required colour and shade with necessary screws etc. all complete including labour, material, cartage, T&P as per direction of EIC. 10.00 Nos 29.30 293.04

5.12 Providing and fixing PTMT door catcher of length 72 mm and dia. of 42 mm with suitable washers weighing not less than 33 gms. including labour, material, cartage, T&P etc. all complete as per specification and direction of EIC. 9.00 Nos 29.64 266.73

6.1 Providing & laying glazed ceramic tiles of size 300x450/ 300x600 mm or larger size with 1st quality of Kajaria/Somany or equivalent approved make including provision of pencil tiles / decorative bands / border in wall tiles , skirting and dado in bedding layer 15mm av. Thickness in CM 1:3 (1cement, 3coarse sand) jointing with grey cement slurry @ 3.3kg per sqm, and grouting the joints with epoxy grout with matching shade and sealed finally with transparent epoxy coating, to avoid dirt on joints, including the cost of material, labour, T&P, curing, scaffolding all complete as per specification and direction of E.I.C. 79.00 Sqm 938.28 74124.36

6.2 Providing & laying Vitrified ceramic tiles matt finish of first quality of size 600 x 600 mm on floor of approved shade & brand like Kajaria/ Johnson/ Somany or as approved, grouting of tiles with neat cement slurry @ 3.30 kg/Sqm and joints finished with matching colour pigment and epoxy solution including cleaning of existing surface with acid after roughening of surface/hacking of surface with suitable tools also providing bedding layer 20 mm (Av. thickness) in c.m. 1:4 (1cement, 4coarse sand) and finally cleaning of surface with soft cloth including labour, material, cartage, wastage, T&P etc all complete as per specification & direction of EIC. 18.00 Sqm 973.32 17519.80

6.3 Providing and laying 20-25 mm thick machine cut Kota stone slab in flooring of size approx 450 x 450 mm size or as per site requirement , over 20 mm (avg.) thick base of cement mortar 1:4 (1 cement: 4 coarse sand) jointed with gray cement slurry mixed with pigment to match the shade of stone slabs, including cost of rubbing, grinding & mirror finish polishing etc. including cost of labour, material, T&P, wastages etc. works at all height / depth etc all complete as required and directed by EIC. 17.00 Sqm 1441.71 24508.99

6.4 Providing and laying 20-25 mm thick machine cut Kota stone slab in steps of stairs, landing, risers etc.over 20 mm (avg.) thick base of cement mortar 1:4 (1 cement: 4 coarse sand) jointed with gray cement slurry mixed with pigment to match the shade of stone slabs, including cost of rubbing, grinding & mirror finish polishing etc. including cost of labour, material, T&P, wastages etc. works at all height / depth etc all complete as required and directed by EIC. 17.00 Sqm 1721.02 29257.31

6.5 Providing & laying Vitrified floor tiles of first quality of size 600 x 600 mm on floor of approved shade & brand like Kajaria/ Johnson/ Somany or as approved, grouting of tiles with neat cement slurry @ 3.30 kg/Sqm and joints finished with matching colour pigment and epoxy solution including cleaning of existing surface with acid after roughening of surface/hacking of surface with suitable tools also providing bedding layer 20 mm (Av. thickness) in c.m. 1:4 (1cement, 4coarse sand) and finally cleaning of surface with soft cloth including labour, material, cartage, wastage, T&P etc all complete as per specification & direction of EIC. 96.00 Sqm 1149.55 110357.09

6.5.1 Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding, and joints filled with acid and/or alkali resisting cement as per IS : 4457, also providing bedding layer 10 mm in c.m. 1:4 (1acid proof cement, 4coarse sand) and finally cleaning of surface with soft cloth including labour, material, cartage, wastage, T&P etc all complete as per specification & direction of EIC. 364.00 Sqm 1286.23 468188.08

6.6 Providing and fixing Chequered terrazo tiles 22 mm thick with graded marble chips of size up to 6 mm in floors, jointed with neat cement slurry mixed with pigment (Medium shade pigment using 50% white cement, 50% ordinary cement) to match the shade of the tiles, including rubbing and polishing complete, on 20 mm thick bed of cement mortar 1:4 (1 cement :4 coarse sand) including labour, material, cartage, wastage, T&P etc all complete as per specification & direction of EIC. 22.00 Sqm 1097.86 24153.01

6.7 Providing and fixing 18 mm thick Granite stone slab of colour black, Cherry/ Ruby red, gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, Staircase case steps & landing, window sills, facias and similar locations of required size, approved shade, colour and texture laid over bedding layer 20 mm (Av. thickness) in in C.M.1:4 (1 cement, 4 coarse sand) Jointing with grey cement slurry @ 3.3 kg/sqm and grouting the joints with epoxy grout touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. including all labour, material, wastage T&P etc all complete as per specification and direction of EIC. 2.00 Sqm 3800.86 7601.72

7.1 Providing, rendering, dubbing out cement plastering 12 mm thick with cement mortar 1:6 (1 cement: 6 coarse sand (zone-Ill) derived from natural sources) on walls, darins, manholes, ducts etc of fair faces of brick wall / concerete surface including plaster at all floors including jams, soffit and edges of plastering chamfering wherever required, finishing of surface even and smooth without using extra cement with all labour, material, scaffolding, curing, including hacking of concrete surfaces, T&P etc all complete as per specification and direction of EIC. 891.00 Sqm 254.30 226582.19

7.2 Providing, rendering, dubbing out cement plastering 15 mm thick with cement mortar 1:6 (1 cement: 6 coarse sand (zone-Ill) derived from natural sources) on walls, darins, manholes, ducts etc of rough / fair faces of brick wall / concerete surface including plaster at all floors including jams, soffit and edges of plastering chamfering wherever required, finishing of surface even and smooth without using extra cement with all labour, material, scaffolding, curing, including hacking of concrete surfaces, T&P etc all complete as per specification and direction of EIC. 891.00 Sqm 292.56 260670.07

7.3 Providing, rendering, dubbing out cement plastering 6 mm thick with cement mortar 1:3 (1 cement: 3 coarse sand (zone-Ill) derived from natural sources) on fair faces of brick wall / concerete surface including plaster at all floors including jams, soffit and edges of plastering chamfering wherever required, finishing of surface even and smooth without using extra cement with all labour, material, scaffolding, curing, including hacking of concrete surfaces, T&P etc all complete as per specification and direction of EIC. 404.00 Sqm 222.33 89822.53

7.4 Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections. 181.00 metre 58.02 10500.90

7.5 Providing & applying approx. 1 mm thick wall care putty of make birla, berger , ACC or approved make with a coat of wall primer of approved brand to give a smooth & even finish at all floors on walls / ceilings or any description of works including preparation of surface smooth & even, filling holes / minor pits all complete with labour, material, scaffolding, T&P etc all complete as per specification and direction of E.I.C 1781.15 sq.m 115.48 205681.86

7.6 Providing & applying two or more coats of weather resistant exterior paint of first quality of approved shade and make like apex of Asian /weather coat long life of Berger/weather shield max of ICI etc on new work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) including preparation of surfaces by sand papering where required, filling holes /Cracks with birla putty / snowfilla, all complete with labour, material, scaffolding, T&P etc all complete as per specification and direction of E.I.C 891.00 Sqm 118.84 105890.00

7.7 Providing & applying two or more coats applied @ 1.67 ltr/ 10 sqm of weather resistant exterior paint on old work of first quality of approved shade and make like apex of Asian /weather coat long life of Berger/weather shield max of ICI etc including preparation of surfaces, by brooming down, removal of flakes, oil, grease marks by sand papering where required, filling holes /Cracks with birla putty / snowfilla, leaving the premises clean and tidy, disposing Rubbish outside in dustbins removal of all splashes and cleaning glass and joinery all complete with labour, material, scaffolding, T&P etc all complete as per specification and direction of E.I.C 395.00 Sqm 89.36 35295.23

7.8 Providing and applying two coats of acrylic distemper on new work (ready mixed) having VOC content less than 50 gram/litre of approved brand and shade such as Asian/Berger etc. on wall / ceiling surface including a coat of primer, preparation, removing of nails, filling holes / minor pits , cracks with Birala putty wherever required etc. leaving premises clean and tidy with all labour, material, wastage, scaffolding with all protective measures, T&P, cartage etc all complete as per specification and direction of EIC. 891.00 Sqm 137.38 122406.47

7.9 Providing & applying two coats of super synthetic enamel painting on wood / steel / wall surface over a coat of wood/ steel/ wall primer for any description of works of approved shade, make such as Asian / Berger / ICI of first quality including preparation of surface with Putty filling in cracks, holes etc wherever required, at any height / depth or any descripiton of works at all floors including all labour, material, T&P ,scaffolding all complete as per specification and direction of E.I.C. 162.00 Sqm 167.43 27122.85

8.1 Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand) admixed including all complete works as per specification and direction of EIC. 454.00 sqm 1246.60 565958.22

with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. (c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin- charge. (d) Finishing the surface with 20 mm thick

jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in- charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep.(e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-Charge : With average thickness of 120 mm and minimum thickness at khurra as 65 mm.

8.2 Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet with all labour, material, T&P,cartage etc all complete as per specification and direction of EIC. 6.00 Each 220.71 1324.23

8.3 Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) In 75x75 mm deep chase with all labour, material, T&P,cartage etc all complete as per specification and direction of EIC. 74.58 metre 225.81 16840.98

8.4 Supplying, fixing of 600 mm diameter industrial Roof Turbo Ventilators with all necessary accessories, selants, fixtures and as per manufacturing specifications, as approved by Engineer-in-charge complete in all respect. 10.00 Nos 6950.00 69500.00

8.5 Providing and laying 80 mm thick factory made cement concrete interlocking paver block of M-35 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the specification and direction of Engineer-in-charge. 150.00 Sqm 807.71 121156.50

9.1 Providing & fixing white glazed Vitreous china orrissa pan of size 580 x 440 mm with integral type foot rests of make Hindware, Cera, Nycer, Perryware or as approved make including 10 litre capacity PVC low level flushing cistern with PVC flush bend pipe and suitable joint for closet inlet, setting in plain cement concrete 1:2:4(1 cement : 2 coarse sand: 4 ,20 mm graded stone aggregate), around the pan as to get the specified thickness of floor complete in all respect inluding 100mm CI P-trap with extension pipe as required, cutting chases walls and floors and finishing the same in cement mortar 1:3 (1 Cement : 3 coarse sand) etc.all complete as required and as per specification and direction of EIC. 2.00 each 5020.53 10041.06

9.2 Providing and fixing of white glazed Vitreous china European type W.C. pan with white solid plastic seat cover and lid including 10 litre capacity PVC low level flushing cistern with PVC flush bend pipe and suitable joint for closet inlet of make Hindware, Cera, Nycer, Perryware or as approved make in all respect including flush pipe, labour, material, cartage T&P etc. all complete as required and as per specification and direction of EIC. 1.00 each 5939.85 5939.85

9.3 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required including all complete works as per specification and direction of EIC. One urinal basin with 5 litre white P.V.C. automatic flushing cistern. 3.00 each 4643.17 13929.51

9.4 Providing & fixing vitreous china white wash basin flat back 630x 450 mm size of approved make such as Hindware, Cera, Nycer, Parryware including 15 mm C.P. brass pillar tap (L&K, Prayag, Hindware, Parryware, Plumber or as approved by EIC) with 450mm long PVC Connection of Prayag make or equivalent approved make CP waste coupling 32mm dia of L& K, Plumber make, MS / CI bracket for fixing of wash basin painted with white paint all complete including cutting and making goods, fixing with cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregates) and finishing with cement mortar 1:3, the walls and floor with all labour, material, T&P, wastage, cartage etc all complete as per specification and direction of EIC. 3.00 each 1651.66 4954.98

10 Providing & fixing 100/ 110 mm dia PVC (SWR) pipe of approved make such as Supreme, Diplast , kishan or equivalent fixed to walls including necessary required MS clamps etc and adhesive for jointing the pipe for sewerage / rain down pipe fixed to wall/ laid in trenches including all labour, materials, tool & plants, wastage, scaffoldings, etc. all complete as per direction of EIC. 22.50 metre 279.98 6299.55

10.1 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion including etc. all complete as per specification and direction of EIC.

(a) Coupler 110 mm 6.00 each 101.01 606.06

(b) Single pushfit Coupler- 110 mm 6.00 each 94.66 567.96

(c) Single tee with door - 110 mm 4.00 each 173.71 694.84

(d) Single tee without door- 110 mm 4.00 each 164.21 656.84

(f) Shoe (Plain)- 110 mm bend 2.00 each 97.82 195.64

10.2 Providing and fixing unplasticised -110 mm PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. all complete as per specification and direction of EIC. 6.00 each 275.46 1652.76

10.3 Providing and fixing 600 x 450 mm x 5.00 mm bevelled edge mirror with the holes on all the four corners of the glass of Modiguard/ Saint Gobain/ Atul or as approved by EIC, complete fixed with SS spacers or 6 mm thick asbestos sheet/ commercial hard board as required, fixed to wooden / PVC cleats with C.P. brass screws and washers all complete with labour, material, T&P, cartage etc and as per specification and direction of EIC. 1.00 each 1192.89 1192.89

10.4 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 1500x450 mm all complete with labour, material, T&P, cartage etc and as per specification and direction of EIC. 1.00 each 1552.73 1552.73

11.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings like brass socket MTA & FTA, CPVC L band, Elbow, clamps, CPVC Sockets and plug with approved brand ISI marked, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints all complete as per direction of Engineer in Charge.

(a) 15mm dia nominal bore 36.00 metre 212.77 7659.72

(b) 25 mm dia. nominal bore 17.40 metre 297.90 5183.46

(c) 50 mm dia. nominal bore 13.00 metre 693.02 9009.26

11.2 Providing and fixing 25 mm nominal dia ball valve (brass) of approved quality High or low pressure with plastic floats all complete with labour, material, T&P, cartage etc and as per specification and direction of EIC. 1.00 each 301.83 301.83

11.3 Providing and fixing 25 mm nominal bore gun metal non- return valve of approved quality (screwed end) all complete with labour, material, cartage, T&P etc. as per specification and direction of EIC. 1.00 each 438.74 438.74

C.P. BRASS FITTING

11.4 Providing and fixing uplasticised 15mm nominal bore PVC connection pipe 45cm length with brass unions all complete with labour, material, cartage, T&P etc. as per specification and direction of EIC. 11.00 each 72.52 797.72

11.5 Providing, placing and fixing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes including all necessary fittings, labour, material, cartage, whisting charges etc. as per specification and direction of EIC. 1000.00 Ltr 8.16 8160.00

12.1 Providing & fixing C.P. brass bib cock 15 mm dia of L&K / Hindware / Parryware / Plumber/ Prayag or as approved by EIC including labour, material, T&P, soota, safeda etc all complete as per specification & direction of E.I.C. 6.00 each 262.07 1572.42

12.2 Providing & fixing C.P. brass long body bib cock 15 mm dia of L&K / Hindware / Parryware / Plumber/ Prayag or as approved by EIC including labour, material, T&P, soota, safeda etc all complete as per specification & direction of E.I.C. 3.00 each 592.72 1778.16

12.3 Providing and fixing 15mm nominal bore, 125mm long foam flow PTMT pillar cock of approved quality and colour including labour, material, T&P, soota, safeda etc all complete as per specification & direction of E.I.C. 5.00 each 166.25 831.25

12.4 Providing & Fixing 15mm dia C.P. brass stop(conceald) of standard design and of approved make including labour, material, T&P, soota, safeda etc all complete as per specification & direction of E.I.C. 3.00 each 497.39 1492.17

12.5 Providing & Fixing 15mm dia C.P. brass angle of standard design and of approved make including labour, material, T&P, soota, safeda etc all complete as per specification & direction of E.I.C. 5.00 each 426.06 2130.30

12.6 Providing & Fixing PTMT soap dish holder having length 138mm, breadth 102mm, height 75mm with concealed fiting arrangements of approved make including labour, material, T&P etc all complete as per specification & direction of E.I.C. 3.00 each 82.68 248.04

12.7 Provding & Fixing C.P Towel rail of approved make including brackets fixed to wooden cleats with CP brass screw all complete including labour, material, T&P etc all complete as per specification & direction of E.I.C. 4.00 each 499.57 1998.28

12.8 Providing and fixing CP brass Toilet paper holder of make - L&K/ Plumber/ prayag/ Pearl or as approved by EIC including required accessories all complete with labour, material, T&P, wastage etc as per specification and direction of EIC. 3.00 each 596.24 1788.72

13 Providing and fixing 80 mm dia Chlorinated Polyvinyl Chloride (CPVC) pipes, for external work having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 8.00 metre 1607.15 12857.20

14 Constructing brick masonry chamber with bricks of class designation 7.5 for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 coarse sand (Zone III) : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. including all complete works as per specification and direction of EIC. (Inside dimensions 455x610 mm and 45 cm deep for single pipe line.) 2.00 Nos 5147.01 10294.02

15 Constructing brick masonry circular manhole with bricks of class designation 7.5, 1.22 m internal dia at bottom and 0.56 m dia at top in cement mortar 1:4 (1 cement :4 coarse sand) inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement foundation concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nomin al size) finished with a floating coat of neat cement, all complete as per standard design : 1.68 m deep with SFRC Cover and frame (heavy duty HD-20 grade designation) 560 mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg. fixed in cement concrete 1:2:4 (1cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete works as per specification and direction of EIC. (Excavation, foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately) 3.00 Nos 18326.21 54978.63

16 Excavating trenches of required width for pipes, cables, etc exceeding 300 mm dia but not exceeding 600mm including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m all complete as per specification and direction of EIC. 16.00 metre 261.25 4180.00

17 Providing and fixing Single socketed pipes 110 mm diameter on wall face unplasticised Rigid PVC pipes of approved make such as supreme, Kissan or as approved by EIC etc including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, including labour, material, cartage, T&P etc. all complete as per specification and direction of EIC. 16.00 metre 279.98 4479.68

A ELECTRICAL ITEMS (Sub head-I-Internal Wiring)

1 Group C' Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.(Note: Color code for Phase wire:Red/Yellow/Blue, Neutral: Black & Earth: Green) 50.00 Point 1431.93 71596.64

2 Group C' Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (without independent switch etc.) with 1.5 sq. mm FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS/HFFR PVC insulated copper conductor single core cable etc. as required. 5.00 Point 835.29 4176.47

3 Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. 5.00 Each 337.82 1689.08

4 Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. 5.00 Each 39.50 197.48

5 Supplying and fixing 1 or 2 Module (75mmX75mm) size/ modules, GI box along with modular base & cover plate for modular switches in recess etc. as required. 1.00 Each 297.48 297.48

6 Supplying and fixing modular Telephone socket outlet with GI box, modular plate & modular plate cover etc. including connections as required. 1.00 Each 141.18 141.18

7 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. 20.00 Each 457.98 9159.66

8 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required 15.00 Each 553.78 8306.72

9 Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve Anchor/Havells/L&T/Legrand/GM/ABB make including connections, painting etc. as required. 5.00 Each 678.15 3390.76

10 Wiring for circuit/ submain wiring alongwith earth wire with the 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 50.00 Meter 224.37 11218.49

11 Wiring for circuit/ submain wiring alongwith earth wire with the 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 100.00 Meter 261.34 26134.45

12 Wiring for circuit/ submain wiring alongwith earth wire with the 2 X 4 sq. mm + 1 X 4 sq. mm earth wire of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 55.00 Meter 313.45 17239.50

13 Wiring for circuit/ submain wiring alongwith earth wire with the 2 X 6 sq. mm + 1 X 6 sq. mm earth wire of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 50.00 Meter 405.04 20252.10

14 Wiring for circuit/ submain wiring alongwith earth wire with the 4 X 6 sq. mm + 2 X 6 sq. mm earth wire of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 10.00 Meter 683.19 6831.93

15 Wiring for circuit/ submain wiring alongwith earth wire with the 4 X 10 sq. mm + 2 X 6 sq. mm earth wire of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 10.00 Meter 905.88 9058.82

16 Supplying and drawing 2 pair 0.5 mm dia FRLS/HFFR PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required. 25.00 Meter 32.77 819.33

17 Supplying and fixing of 20mm sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 25.00 Meter 126.89 3172.27

18 Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required. 41.00 Each 87.39 3583.19

B SUBHEAD - II - FITTINGS & FIXTURES

1 Supplying, installation, Testing & Commissioning of 36W Panel light 2x2 ft., of Powder coated die cast /Extruded aluminium Body (Thickness > 1.20 mm) body material and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, freqency 50/60 hz, Operating temp range -5 0C to 40 0C, internal surge protection of 2.5 KV with Short & Open circuit protection, THD < 10% , P. F.≥0.95, IP20, CRI >80, UGR (Unified Glare Rating) < 19, Flicker free, (flicker should be below 5 %), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning Hours with, 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Colour Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 <120 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). 9.00 Each 2107.56 18968.07

2 Supplying, Installation, Testing & Commissioning of 36W LED surface mounted Batten light of Powder coated die cast /Extruded aluminium Body (Thickness > 1.20 mm) body material and construction as per IS : 10322 with driver (Replaceable) as per the requirement with Driver efficiency >85%, Operating voltage AC 140- 270 Volt, frequency 50/60 hz, Operating temp range -5 °C to 40 °C, internal surge protection of 2.5 KV with Short & Open circuit protection, THD < 10%, P. F.≥0.95, IP20, CRI >80, Flicker free, (flicker should be below 5 %), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Colour Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. complete in all respect i/c external connections with 1.5 sqmm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 <120 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in- Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). 9.00 Each 569.75 5127.73

3 Supplying, Installation, Testing & Commissioning of 100W Flood Light, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 0C to 50 0C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI >70, under voltage and over voltage protection, EMI-EMC as per CISPR -15, lenses for beam angle 30 deg-120deg as per the application and the project requirement., suitable tilt able fitting, life time (LED, Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin) , SDCM(Standard Deviation Color Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 <120 lm/Watt output .LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted.. Shape size and CCT shall be as approved by Engineer-in- Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). 8.00 Each 1904.20 15233.61

4 Supply, Installation, Testing and Commissioning of 1200mm, service value ≥ 6.0 CM/Min/Watt, air delivery 210 CM/Min (Minimum) ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. metal( Aluminium alloy) blades, 30 cm long down rod, 2 nos. canopies,shackle kit, safety rope, copper winding, steel/Al body Power Factor not less than 0.9, Service Value (CM/M/W) minimum as above, 350 RPM (tolerance as per IS : 374-2019), THD (Total Harmonic Distortion) less than 10%, suitable for operation with regulator for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 0C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC supply, Ceiling Fan compliant to IS 374:2019 fan i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required. 5.00 Each 2264.71 11323.53

5 Supply ventilation fan 250mm approx size, make Crompton/ Surya/ Havells/ Philips/ C&S/ Bajaj 2.00 Each 1380.00 2760.00

6 Supply of industrial heavy duty exhaust Fan of size 450 mm, 1400 rpm, 230 volts, 50 Hz., of Havells/Almonard/Crompton/Bajaj 8.00 Each 6500.00 52000.00

7 Installation, Testing, Commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS/CFL/LED lamps per fitting, complete with all accessories including connections etc. as required. 18.00 Each 126.89 2284.03

8 Installation, Testing and Commissioning of pre-wired, fluorescent fitting / compact fluorescent/ LED fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS/HFFR PVC insulated, copper conductor, single core cable and earthing etc. as required. 8.00 Each 217.65 1741.18

9 Installation, Testing and Commissioning of exhaust fan(upto 450mm sweep) in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. 10.00 Each 467.23 4672.27

C SUBHEAD - III - DISTRIBUTION BOARDS 0.00

1 Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)

2 Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, Ics=100% Icu and Operational Voltage 690V etc. as required. 0.00

3 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 0.00

3.1 Single pole 25.00 Each 239.50 5987.39

3.2 Triple pole 15.00 Each 899.16 13487.39

4 Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. 10.00 Each 11.76 117.65

5 Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required. 2.00 Each 1517.65 3035.29

6 Supplying and fixing 30 A, 415 V, TPN Industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 30 A "C" curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required. 5.00 Each 3662.18 18310.92

D SUBHEAD - IV - CABLE AND CABLE TRAY ETC. 0.00

1 Supply of 4CX25Sqmm. aluminium conductor, XLPE insulated, PVC sheathed, steel armoured 1100 volts grade power distribution cable conforming to IS7098 part I 1988 100.00 Meter 270.00 27000.00

2 Supply of 3.5CX70Sqmm. aluminium conductor, XLPE insulated, PVC sheathed, steel armoured 1100 volts grade power distribution cable conforming to IS7098 part I 1989 50.00 Meter 589.00 29450.00

3 Supply of 3.5CX185Sqmm. aluminium conductor, XLPE insulated, PVC sheathed, steel armoured 1100 volts grade power distribution cable conforming to IS7098 part I 1990 275.00 Meter 1380.00 379500.00

4 Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of 4CX25Sqmm. size (clamped with 1mm thick saddle) on cable tray as required. 100.00 Meter 44.54 4453.78

5 Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of 3.5CX70Sqmm. size (clamped with 25x3mm MS flat clamp) on cable tray as required. 50.00 Meter 91.60 4579.83

6 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of 3.5CX185 sq. mm size direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering. 275.00 Meter 250.42 68865.55

7 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of 3.5CX185 sq. mm size in the existing RCC/ HUME/ METAL pipe as required. 263.00 Meter 81.51 21437.82

8 Supplying and installing 100 mm width X 50 mm depth X 1.6 mm thickness size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with two numbers GI Suspenders i/c base of suitable size GI angle, GI bolts & nuts, fastner etc as required. 20.00 Meter 633.61 12672.27

9 Supplying and installing 300 mm width X 50 mm depth X 1.6 mm thickness size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with two numbers GI Suspenders i/c base of suitable size GI angle, GI bolts & nuts, fastner etc as required. 15.00 Meter 892.44 13386.55

10 Supplying and installing 100 mm width X 50 mm depth X 1.6 mm thickness size of perforated Hot Dipped Galvanised Iron cable tray "bends" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with two numbers GI Suspenders i/c base of suitable size GI angle, GI bolts & nuts, fastner etc as required. 1.00 Each 1052.10 1052.10

11 Supplying and installing 300 mm width X 50 mm depth X 1.6 mm thickness size of perforated Hot Dipped Galvanised Iron cable tray "bends" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with two numbers GI Suspenders i/c base of suitable size GI angle, GI bolts & nuts, fastner etc as required. 1.00 Each 1661.34 1661.34

12 Supplying and installing 100 mm width X 50 mm depth X 1.6 mm thickness size of perforated Hot Dipped Galvanised Iron cable tray "Tee"(galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with two numbers GI Suspenders i/c base of suitable size GI angle, GI bolts & nuts, fastner etc as required. 1.00 Each 1199.16 1199.16

13 Supplying and installing 300 mm width X 50 mm depth X 1.6 mm thickness size of perforated Hot Dipped Galvanised Iron cable tray "Tee"(galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with two numbers GI Suspenders i/c base of suitable size GI angle, GI bolts & nuts, fastner etc as required. 1.00 Each 1927.73 1927.73

14 Supplying and installing 100 mm width X 50 mm depth X 1.6 mm thickness size of perforated Hot Dipped Galvanised Iron cable tray "Cross member" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with two numbers GI Suspenders i/c base of suitable size GI angle, GI bolts & nuts, fastner etc as required. 1.00 Each 1199.16 1199.16

15 Supplying and installing 300 mm width X 50 mm depth X 1.6 mm thickness size of perforated Hot Dipped Galvanised Iron cable tray "Cross member" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with two numbers GI Suspenders i/c base of suitable size GI angle, GI bolts & nuts, fastner etc as required. 1.00 Each 2111.76 2111.76

16 Supplying and making end termination with brass compression gland and aluminium lugs for 4C X 25 sq. mm (28mm) size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 10.00 Each 313.45 3134.45

17 Supplying and making end termination with brass compression gland and aluminium lugs for 3½C X 70 sq. mm (38mm)) size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 4.00 Each 455.46 1821.85

18 Supplying and making end termination with brass compression gland and aluminium lugs for 3½C X 185 sq. mm (57mm) size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 2.00 Each 841.18 1682.35

19 Providing, laying and fixing 100MM dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep) and re-filling etc as required 12.00 Mtrs. 1611.76 19341.18

E SUBHEAD - V - EARTHING 0.00

1 Earthing with G.I. earth pipe 4.5 Meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. 10 Each 6435.29 64352.94

2 Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required. 10 Mtr 634.45 6344.54

3 Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. 30 Mtr 241.18 7235.29

4 Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. 10 Mtr 70.59 705.88

F SUBHEAD - VI -LT PANELS

1 Design, fabrication, supply, installation, testing and commissioning of cubical type indoor LT panel with front lockable door arrangement, suitable for mounted on the MS chanel frame work with cable entry from top/bottom as per site requirement with removal gland plates with required knockouts, panel fabricated out of 2mm thick CRCA sheet steel folded and braced as necessary to provide a rigid support for all componenets , totally enclosed, dust and vermin proof, doors for individual feeders/compartments, prepration of surface and treat ment by seven tank process, powder coated lockable door(double leaf) and all doors and covers shall be fully gasketed and/or rubber strips and ensure good locable, durable door opening & closing mechanism, suitable mashed ventilator louvers with suitable cover, Aluminum bus-bars for three phases and neutral, heat shrinkable PVC sleeves, GI earth strip of required size with 2nos earthing terminals, bus-bar insulators, Danger and incription plate, lifting hooks, etc. with necessary inerconnections , comprising of following switchgear and accessories complete by making suitable foundation as required for fixing of distribution board in all respect and as directed by engineer-in-charge: Incoming: 1No.-400A, 50KA, 415 V, 4Pole MCCB Make Schneider/LK/BCH/ABB Metering 1Set.-VIF meter with suitable CTs, Indicating Lights. Busbar 600Amp 4 pole bus bar with colour coded Heat Shrink Sleeves. Outgoing: 3Nos.-200Amp, 50KA, 415 V, TPN MCCB Make Schneider/L&K/BCH/ABB. 5Nos.-150Amp, 50KA, 415 V, TPN MCCB Make Schneider/L&K/BCH/ABB 2Nos.-125Amp, 50KA, 415 V, TPN MCCB 01 NO 430000.00 430000.00

Total (Civil +Electrical) 14022960.65

Contractor shall quote only numerical value of percentage either Above or Below in highlighted Cell on Total Above % 0.00

Sub Total 14022960.65

Add GST @18% on sub total 2524132.92

Total Quoted value including GST @18% 16547094.00

Annexure-D (Para 4.6.4)

Abstract Estimate

Name of Work : Term contract for Civil Maintenance works in Township at HAL Korwa. 2023-24. (For One years)

Time Required for

(a) Conclusion of Contract - 03 months

(b) Completion of works- 12 months

Sl. No. Particulars Amount in Rs. Reference

1 Term contract for civil maintennace works in Township for repair and maintenance of buildings, water supply lines, sanitary fittings, approach roads, floors, pavings etc. and allied civil works required for completion of work.

(a) Civil Works (Paer: A+Part: B) #REF! [Annexure-D-1]

Grand Total #REF!

Say Rs. #REF! Lakhs

Manager (Works) ATA

HINDUSTAN AERONAUTICS LIMITED

AVIONICS DIVISION, KORWA

POST OFFICE: HAL, TEH: AMETHI

DISTT: AMETHI (UP) - 22 74 12

Comparative price statement( as per estimated rate)

Name of Work : Term contract for Civil Maintenance works in Township at HAL Korwa.

C. A. No- HAL/KWD/Civil / 02 of 2015-16

PART 'A' MES ITEMS

S. No. Description of work & Sections/ sub heads of MES SSR- 2010 Sections of MES SSR- 2010 As per Estimate M/s Satyam Traders (1/2) M/s Ramesh Traders (1/2) Freak Rate

Weightage with respect to value of work (Approx) Weightage with respect to value of work (Approx) Rate above or below or at Par w.r.t MES-SSR-2010 rates (+) or (-) Rate as per weightage Rate above or below or at Par w.r.t MES-SSR-2010 rates (+) or (-) Rate as per weightage Rate above or below or at Par w.r.t MES-SSR-2010 rates (+) or (-) Rate as per weightage

13 White washing, colour washing and distempering 15 2.00 0.02 166.94 3.3388 167 3.34 150 3.00 208.675 125.205 4.1735

16 Water supply, plumbing, Drains and Sanitary appliances. 18 8.00 0.08 176.69 14.1352 198 15.84 190 15.20 220.8625 132.5175 17.669

19 Fire Hydrant, Fire detection and alarm system, Fire hydrant and Sprinkler system. 27 1.00 0.01 166.94 1.6694 181 1.81 160 1.60 208.675 125.205 2.08675

Rebate offered (in %age) if any 2.00

Status of Parties L-2 L-1 9.380172329

Sr. Asstt-C Engineer (CIVIL) MGR. (WORKS)

D.P. Vishwakarma A.K.Bajpai Satyendra K Maurya

HINDUSTAN AERONAUTICS LIMITED

AVIONICS DIVISION, KORWA

POST OFFICE: HAL, TEH: AMETHI

DISTT: AMETHI (UP) - 22 74 12

SCHEDULE - 'A' Part 'B'

Comparative price statement( as per estimated rate)

Name of Work : Term contract for Civil Maintenance works in Township at HAL Korwa.

C. A. No- HAL/KWD/Civil/21 of 2013-14

PART 'B' NON MES ITEMS

S.N Description of Items Qty. Unit As per Estimate M/s Satyam Traders (1/2) M/s Ramesh Traders (2/2) Freak Rate

Rate in figure ( Rs.) Rate in words ( Rs.) Amount in ( Rs.) Rate (In Rs.) Amount Rate (In Rs.) Amount

1 Supply and stacking of coarse sand such as Banda/ Chopan including transportation, loading, unloading, cartage, wastage, labour, material, T&P etc and stacking in side at proper place all complete as per specification and direction of EIC. 65.00 Cum 1970.00 #NAME? 128050.00 2600.00 169000.00 2300.00 149500.00 - 2462.50 1477.50 56.62514156 70.76139258 65.34090909

2 Supply and stacking of Ist class bricks class 'A' at directed place inside Factory or Township area including all labour, material, transportation, loading, unloading, wastage , T&P etc and stacking in side at proper place all complete as per specification and direction of EIC. 2000.00 Nos 8.00 #NAME? 16000.00 7.50 15000.00 7.00 14000.00 - 10.00 6.00

3 Supply and stacking of 12.5 mm graded stone aggregate of bharatkoop/ Dala quarry including transportation, loading, unloading, cartage, wastage, labour, material, T&P etc and stacking in side at proper place all complete as per specification and direction of EIC. 10.00 Cum 2408.00 #NAME? 24080.00 2400.00 24000.00 2500.00 25000.00 - 3010.00 1806.00

Sr. Asstt-C Engineer (CIVIL) MGR. (WORKS)

D.P. Vishwakarma A.K.Bajpai Satyendra K Maurya

HINDUSTAN AERONAUTICS LIMITED

AVIONICS DIVISION, KORWA

POST OFFICE: HAL, TEH: AMETHI

DISTT: AMETHI (UP) - 22 74 12

Comparative price statement( as per estimated rate)

Name of Work : Term contract for Civil Maintenance works in Township at HAL Korwa.

C. A. No- HAL/KWD/Civil / 02 of 2015-16

PART 'A' MES ITEMS

S. No. Description of work & Sections/ sub heads of MES SSR- 2010 Sections of MES SSR- 2010 As per Estimate M/s Satyam Traders (1/2) M/s Ramesh Traders (1/2) Freak Rate

Weightage with respect to value of work (Approx) Weightage with respect to value of work (Approx) Rate above or below or at Par w.r.t MES-SSR-2010 rates (+) or (-) Rate as per weightage Rate above or below or at Par w.r.t MES-SSR-2010 rates (+) or (-) Rate as per weightage Rate above or below or at Par w.r.t MES-SSR-2010 rates (+) or (-) Rate as per weightage

13 White washing, colour washing and distempering 15 2.00 0.02 154 3.08 167 3.34 165 3.30 192.5 115.5 3.85

16 Water supply, plumbing, Drains and Sanitary appliances. 18 8.00 0.08 163 13.04 198 15.84 200 16.00 203.75 122.25 16.3

19 Fire Hydrant, Fire detection and alarm system, Fire hydrant and Sprinkler system. 27 1.00 0.01 154 1.54 181 1.81 180 0.00 192.5 115.5 1.925

Rebate offered (in %age) if any 2.00

Total Amount (Part-B) 168130.00 208000.00 188500.00

Total Amount (Part A+Part B) 0.00 1268130.00 1557858.16 1373606.38

Status of Parties L-2 L-1

Sr. Asstt-C Engineer (CIVIL) MGR. (WORKS)

D.P. Vishwakarma A.K.Bajpai Satyendra K Maurya