Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹11.4 LAccepted-AOC GOVT CONTRACTOR VILL NAYA SUJAN FEROZPUR KALAN TEH DIST PATHANKOT PIN 145023 | PATHANKOT | PATHANKOT | PUNJAB | 145023 | L1 | Accepted-AOC lowest | |
| 2 | L2₹11.7 L+₹12,414.79 (1.08%)Rejected-AOC | L2 | Rejected-AOC not found lowest | |
| 3 | L3₹11.8 L+₹25,097.50 (2.17%)Rejected-AOC 1 181 KAMATCHI AMMAN KOVIL STREET KANNAN COLONY CHINTHAMANI MADURAI 625009 | MADURAI | MADURAI | TAMIL NADU | 625009 | L3 | Rejected-AOC not found lowest | |
| 4 | L4₹14.7 L+₹3.2 L (27.3%)Rejected-AOC NH 44 BUILDING COLONY NO 01 SUJANPUR TEH DISTT PATHANKOT PUNJAB 145023 | PATHANKOT | PATHANKOT | PUNJAB | 145023 | L4 | Rejected-AOC not found lowest | |
| 5 | L5₹15.0 L+₹3.4 L (29.6%)Rejected-AOC | L5 | Rejected-AOC not found lowest |
Tender Value
Refer Docs
EMD Value
₹36,000
Closing Date
9 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Offg GE
GE Basoli PO lakhanpur Distt Kathua JK
CERATIN REPAIR TO OTM AND MD ACCN IN SOUTH ZONE AT MADHOPUR UNDER GE BASOLI
2022_MES_557296_1
GE/BAS-55/2022-23
Open Tender
Civil Works
Item Rate
180 days
Madhoupur under GE Basoli
class E catg a (i)
7 documents required · 7 mandatory
₹500
GE Basoli
₹36,000
2 Jan 2023
12 Oct 2022
11 Nov 2022
12 Oct 2022
9 Nov 2022
25 Oct 2022
Amount
Demolition of cement concrete (unreinforced) in ground floor and in paving not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed.
Taking down chowkat or frames with shutters (without taking off shutters from the frames) exceeding 1.5 Sqm and not exc 4 Sqm each complete all as specified and directed.
Taking down chowkat or frames with shutters (without taking off shutters from the frames) n.exc 1.5 Sqm each complete all as specified and directed.
Taking down shutters of any description exceeding 1 Sqm and not exc 2 Sqm each complete all as specified and directed..
Taking down shutters and refixing in same opening of any description exc 1.0sqm and n.exc 2.0 sqm. Complete all as specified and directed.
M&L for Rendering 15mm thick on brick work or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement including Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.
M&L for Rendering 15mm thick on brick work or concrete surface in cement mortar 1:6 finished even and smooth without using extra cementincluding Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.
M&L for Rendering 10mm thick on brick or concrete surface as in ceiling in cement mortar 1:3 finished even and smooth without using extra cement including Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.
Extra over rendering or plastering for work in isolated widths or in widths not forming part of general plastering such as in bands, sunk panels, cornices, skirtings, drip moulds and similar work exceeding 15 cm but n.exc 30 cm complete all as specified and directed..
All as per srl item here-in-before, but not exceeding 15 cm in width or girth for sides of chajjas complete all as specified and directed.
M&L Glazed ceramic tiles in vertical surface 350x250mmx7mm/450X350X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface complete 15mm thick rendering/screeding on fair faces of brick / concrete surfaces in cement mortar 1:4 and finished even and fair for receiving tiles including over screed bed or bedding layer of mortar 15mm thick in cement mortar 1:4 for laying floor finishes dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
M&L Non Skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete including screed bed or bedding layer 15mm thick in cement mortar 1:4 for laying floor finishes and including Dismantling floor hearth or wall tiling incl cement mortar bedding (but not backing), removing servicable tiles to store and rubbished off the premises complete all as specified and directed.
M&L Non Skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 but not exceeding 0.38 sqm, in floors and skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete over screed bed or bedding layer of mortar 15mm thick in cement mortar 1:4 for laying floor finishes including dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
M&L Vitrified Coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 but not exceeding 0.38 sqm, in floors and skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including Screed bed or bedding layer of mortar 15mm thick in cement mortar 1:4 for laying floor finishes including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
M&L 18-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.
Roughening surfaces of old concrete surfaces by picking sweeping, cleaning and washing down with water to remove dust etc including taking down tarfelt and brushing neat cement slurry @ 3 Kg/Sqm including 20mm thick screeding in CM (1:4) finished even and smooth mixed with water proofing compound(WPC shall be measured and paid separately) complete all as specified and directed.
Supply only integral water proofing compound complete all as specified and directed.
M&L for Applying bituminous primer on roof surfaces conforming to IS-3384 of 1986 @ 0.30 ltr/Sqm and applying one coat of hot blown bitumen of grade 85/25 @ 1.25 Kg/Sqm and applying APP based polymeric membrane minimum weighing 3.5 kg/sqm and minimum 3mm thick reinforced with polyester non woven fabric (wt not less than 160 gms/sqm) laid on primed surface by forced application complete all as specified with overlap of 10 cms (overlaps to be thermo fused by flame) and applying one coat of hot blown bitumen of grade 85/25 @ 0.7 Kg/Sqm over the APP all as specified complete all as specified and directed..
M&L for Plain cement concrete padding 1:2:4 type B-0 of uniform thickness 50mm in two layer with chicken wire mesh in between the layers, top surface of plain cement concrete padding shall be furnished even and smooth w/o using extra cement, complete all as specified and directed. (wire netting shall be measured and paid separately)
M&L Cement concrete 1:2:4 type B-1 as in mass-concrete complete all as specified and directed.
Dismantling asbestos cement (corrugated, semi corrugated etc sheets in roof covering complete all as specified and directed.
Dismantling timber scantlings (un-framed) 40Sq cm and over in section in any position complete all as specified and directed.
Dismantling timber scantling as in fillets, rails, posts, rafters, purlins, etc. under 40 Sq cm in section in any position as in unframed work complete all as specified and directed.
S&F 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls, etc. Fixed with L-type or J-type or cranked hook bolts complete all as specified and directed.
All as per item above but except sheets complete all as specified and directed.
S&F Asbestos cement two piece adjustable plain wing ridge 6mm thick complete all as specified and directed.
S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
S&F Rolled sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc. Fe 410-W(Gde-E-250) quality complete all as specified and directed.
Plain cement concrete 75 mm thick 1:3:6 type C-2 using 40 mm graded stone aggregate as in sub floor , sub base complete all as specified and directed.
M&L for Durastone / Endura heavy duty vitrified tiles of size 300 mm x 300 mm x 8 to 9 mm thick as in floors and skirting set and jointed in neat cement slurry and pointed in white cement to match the surface complete over screed bed or bedding layer of mortar 15mm thick in cement mortar 1:4 for laying floor finishes complete all as specified and directed.
S&F in repair tubular towel rail, 20mm dia, D type, 60cm long between flanges Brass chromium plated, fixed with rawl plugs complete all as specified and directed..
M&L for brick work with old size sub class 'B' bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:4 complete Demolition of brick work or stone/boulder masonry built in cement mortar including all quoines arches,pillar etc but excluding ashlar facing , dressed stone work and precast concrete articles complete all as specified and directed.
M&L "Steel window factory made double shutter and tubular moulded frame of 16gauge suitable for double shutter as per drg No CEPZ/TD/245/01 sheet 1/1 and CEPZ/TD/246/01 sheet 1/2 (double for mosquito proof one glazed with glazing bars and one gauged without glazing bars ) with side hung shutters including projecting type hinges non friction with 3mm thick 100mm long handle and two nos tower bolts 100mm long welded on 3.0mm thick MS plate to each window shutter and including hold fast and painting with one shop coat of zinc chrome primer." including Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; ladder; framed balusters; railing;frame work for water tanks and similar work conforming to Fe 410-0 or Fe 310-0, complete all as specified and directed.
M&L for pressed steel frames for doors with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate etc. complete , of frame size 105 x 60 mm, including one shop coat of red oxide zinc chrome primer complete all as specified and directed
M&L for pressed steel frames for doors with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate etc. complete , of frame size 125 x 60 mm, including one shop coat of red oxide zinc chrome primer complete all as specified and directed
M&L for providing cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates for filling in the pressed steel door frame/hold fast complete all as specified and directed
S&F factory made single piece solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement forstyle and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles & rails with suitable PVC sheet beading and jointed together with solvent cement supply & fixing in the frame at site. complete all as specified.
S&F solid PVC door frame of size 50 mm X 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S square tube, in opening etc complete all as specified and directed
M&L for prelaminated PVC board 18 to 19 mm thickness prelaminated one side and other side balancing white lamination as in cup board shutters, frame and shelve complete all as specified and directed
M&L for factory made, 2nd class hard wood rail and style 35 mm thick, plain framed, panelled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered partical board with commercial veneering on both sides. The size of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed
S&F 30 mm thick Factory made 2nd class hard wood shutter with top panel Glazed and skeleton open rebated and prepared to receive glass, gauze, etc.(without sash bars) fitted with cut and mitred beds for securing glass, etc.; and bottom panel with panel of 9mm BWP commercial ply or 12 mm veneered particle board with comercial veneering on both faces. The sizes of members of shutters as specified in SSR Part-I, section 8, clause 8.24 (a) complete all as specified and directed
S&F galvanised mild steel wire cloth, 0.48mm nominal dia wire and average width of aperture 1.18mm mm and fixed with tinned tacks or galvanised wire staple complete all as specified and directed
M&L Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads, complete all as specified and directed
S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed
S&F Aluminium anodised barrel tower bolts of extruded section with 150 mm long bolt, complete all as specified and directed
S&F Aluminium alloy, anodised, sliding door bolt 250 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed
S&F Steel locking bolts with mild steel electrogalvanised plate and bright bolt not less than 10mm dia, 100mm size complete all as specified and directed
S&F only mild steel cold rolled butt hinges medium weight 100 mm long complete all as specified and directed
S&F only mild steel cold rolled butt hinges medium weight 75 mm long complete all as specified and directed
Extruded aluminium alloy handles fabricated type anodised and fixed, 150 mm size complete all as specified and directed
S&F 100mm size hasp and staple safety type aluminum anodized with mild steel hinges pin including bolt to hinge plate and fixed with screw complete all as specified and directed
S&F in repair window stays any type of cast iron/ mild steel complete all as specified and directed
S&F in repair Mortice lock Brass 4 levers, vertical type size 100mm complete all as specified and directed.
S&F in repair floor door stoper of Aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor overall length 150 mm inculuding valcanised rubber piece complete all as specified and directed
S&F in repair Aluminium (extruded section body) Door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg
M&L for 2nd class hard wood small fittings such as shaped door & window stops, cleat including all necessary labours, articles not exceeding 200 cubic centimeter each complete all as specified and directed
S&F 300 mm ordinary rat tail rod pattern spring incl roller and roller plate (mild steel) complete all as specified and directed.
S&F in repair Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. complete all as specified.
S&F Decorative curtain rod with fixing brackets, stops, rollers etc. complete all as specified and directed
S&F in repair peg set of Six mild steel complete all as specified and directed
M&L for preparation of wooden surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed
M&L for preparation of steel and iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.
M&L for preparation of steel and iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified and directed
M&L for applying three coats of white washing on ceiling including preparation of newly plastered surfaces complete all as specified.
M&L for applying three coats of white washing on walls including preparation of newly plastered surfaces complete all as specified.
M&L 3mm thick wall care putty on wall incl roughning of surfaces complete all as specified and directed
M&L two coats of cement base paint and including preparation of surface new complete all as specified and directed.
M&L Preparing new surfaces, plastered or unplastered of walll and applying two coats of weather proof exterior emulsion paint over a coat of primer on walls complete all as specified and directed..
S&F in repair water closet (Squat pattern) without lime concrete bedding, vitreous china long pan orissa pattern 580x440mm, white with integral foot rests (excluding flushing cistern & flush pipe).including connectoin to trap, and to flushing pipe, antisyphonage pipe, etc. complete including making good to floor complete all as specified and directed
S&F 10 ltr capacity PVC valveless, syphonic action type flushing cistern low level white with inlet, ball valve, float and handle including connection to pipe fixed in repair complete all as specified and directed
Supply only flush pipe of PVC 32 mm dia for low level cistern complete all as specified and directed.
Taking up or down steel tubing and connections, including cleaning for refixing or removal to store bore of pipe 15mm complete all as specified and directed.
S&F Steel water tubing 15 mm bore medium grade galvanised with all fittings including short lengths, fixed to walls, or laid in floor complete with all fittings( such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) all as specified complete all as specified and directed.
Refixing old steel tubing and connections in new or old position (walls, ceiling, floors, etc) bore of pipe 15mm complete all as specified and directed
S&F Stop valve, cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15mm bore and fixed in repairs, all complete all as specified and directed
S&F Stop valve, cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 20mm bore and fixed in repairs, all complete all as specified and directed
Stop valve, chromium plated, cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions of bore dia 15mm complete all as specified and directed
S&F Bib taps , cast copper alloy, chromium plated with crutch or butterfly handle screwed down for iron pipe or for brass ferrule and fixed for bore of pipe 15 mm and fixed in repairs, complete all as specified and directed
Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe of bore 15 mm, fixed in repairs, complete all as specified and directed
S&F PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.
S&F Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for ironpipe and fixed. (Minimum weight 210 gms) complete screwed for iron pipe or brass ferrule of size 20 mm bore.
S&F in repair Chromium plated brass shower rose with or without swivel joints, 125 mm size including fixing to steel pipe or union, complete all as specified and directed
S&F in repair cast iron soil, waste and vent pipes in any length with or without ears, with cement joints fixed to walls, 100mm dia, sand cast pipes including two coats of black Japan paint complete all as specified and directed.
S&F in repair cast iron soil, waste and vent pipes in any length with or without ears, with cement joints fixed to walls, 75mm dia, sand cast pipes including two coats of black Japan paint complete all as specified and directed.
S&F cast iron soil, waste and vent pipes in any length with or without ears, with cement joints laid in trenches or in floor, 100mm dia, sand cast pipes complete all as specified and directed.
-ditto- but 75mm dia complete all as specified and directed.
S&F 100 mm dia Bends (any radius) diminishing pieces or tapers (larger bore measured) complete all as specified and directed..
ditto- but dia complete all as specified and directed.
S&F in repair Branch pieces, single (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches 100 dia complete all as specified and directed.
S&F cast iron trap 'P' or 'S' 100 mm complete all as specified and directed.
S&F cast iron floor trap 75 mm, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed..
S&F in repair Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I of capacity 500 ltr Dismantling water tank any type of capacity exceeding 250 litres but not exceeding 500 ltrs complete all as specified and directed. .
S&F in repair Concealed stop cock , cast copper scolly screwed presure, with crruch of bult-terfl y hanle, screwed both ends for iron pipe for unions and fixed complete all as specified and directed.
S&F in repair Angle valve fancy type, cast copper scolly screwed presure, with crruch of bult-terfl y hanle, screwed both ends for iron pipe for unions and fixed complete all as specified and directed.
S&Fin repair vitreous china wash hand basin white flat back of size 550x400 mm including bracket, cutting for and pinning the ends of brackets or erecting stands exclusive of waste pipe but including brass chromium plated waste coupling with long screwed sank and fly nuts complete all as specified and directed.
S&F in repair PVC grating 100mm square/round of PTMT complete all as specified and directed..
Taking down eaves and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends swan necks, etc, including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fitting and accessories) complete all as specified and directed.
S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls of bore 110mm complete all as specified and directed..
S&F PVC(SWR) bends any radius of bore 110 mm complete all as specified and directed..
S & F in position suspended false ceiling system using E-grid suspended ceiling grid system of M/S Saint Gobain.The size of grid shall be 600 X 600mm with GI frame work main runner 38 X 24 cross tee 25 X 24 mm and wall angle 24mm X 24mm using 8 mm th ceiling panel laminated with PVC film on front face and foil back available in due drop texture as per IS-2095 part-I 1996 fixed in the grid of E grid suspended ceiling grid system duly suspended by 4 mm dia GI bar hangers from the purlins of the roof with butterfly clips including Demolition of wall and ceiling board (fibre,pulp,insulation etc) or insulation boards/slabs/blankets any thickness,including cover fillets complete all as specified and directed.
S & F Solid PVC Wall Lining consisting of 5mm th wood grain printed PVC sheet one side inclusive of solvent cement and fixing at site on PVC frame complete all as specified and directed.
S & F 5mm th PVC Sheet Fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification and drawings complete all as specified and directed..
S & F 5mm th Printed PVC Sheet in strips & channel feathered at the edges for fixing on solid PVC Wall Lining,Insulated PVC Wall Lining and solid PVC Partitions inclusive of solvent cement at site all as specified and directed
Demolition of wall and ceiling board (fibre,pulp,insulation etc) or insulation boards/slabs/blankets any thickness,including cover fillets complete all as specified and directed.
Providing and fixing suspended false ceiling, Hollow PVC sheet 8-9 mm thick fixed to ceiling section with self drilling screws as per manufacturing instruction. Size of the main supporting section (Ceiling Section) is 80x 26 x 51 mm, Perimeter chanel 20 x 28 x 30 mm, Intermidiate chanel(primary section to support the ceiling section) 15 x 45 x 15 mm and ceiling angle(to provide suspensions from the structural soffit) is 25 x 10 mm complete all as specified and directed.
S & F Door seal with rubber brush equal to the lenght of door complete all as specified and directed.
Supply & Fix PVC waste pipe suitable for wash hand basin/ kitchen sink/urinal etc complete all as specified and directed.
Om Sai Ram Builders
R K Builders
HARI OM ENTERPRISES
Balaji Engineers
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .