Loading…
Loading…
Tender Value
₹7 L
EMD Value
₹7,000
Closing Date
15 Oct 2026, 3:00 pm
Assistant Commissioner
South Zone, Coimbatore Corporation, Kuniyamuthur, Coimbatore 641008
Providing GI Shed and Electrical works for corporation Reserve site at Gandhi nagar in Ward no 98,South Zone.
2026_MAWS_706572_57
E4 / South Zone / 2026
Open Tender
Civil Works
Works
365 days
South Zone, Coimbatore Corporation
As per the tender condition attached
4 documents required · 4 mandatory
₹0
₹7,000
22 Sept 2026
22 Sept 2026
16 Oct 2026
22 Sept 2026
15 Oct 2026
22 Sept 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete 10 cum | 11 | Cum | - | - |
| 2 | Plain Cement Concrete 1:4:8 (one part of cement, four part of Crushed Stone Sand (M- Sand) and Eight part of coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard
specification | 4 | Cum | - | - |
| 3 | Plain Cement Concrete 1:2:4 (one cement, two Crushed Stone Sand (M Sand) and four coarse aggregates) using 20mmsize ISS HBG metal includingcost and conveyance of all materials tosite and including for the mixing, layingand labour charges etc., completeasper standard specification | 9 | Cum | - | - |
| 4 | Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC Rigid pipe on wall and ceiling with PVC accessories with suitable Module Plastic surface mounting switch box on wall with 1 no. 6A one way module switch and 1 no. 6A 3/2 pin module socket with module front plate with painting of Suitable colour with continuous earth wire connection of 1.5 sq.mm copper wire for Open PVC conduit Light/Fan point ( 8 points / Coil) Higher End | 12 | Nos | - | - |
| 5 | Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC Rigid pipe on wall and ceiling with PVC accessories with suitable Module Plastic surface mounting switch box on wall with 1 no. 6A one way module switch and 1 no. 6A 3/2 pin module socket with module front plate with painting of Suitable colour with continuous earth wire connection of 1.5 sq.mm copper wire for Open PVC conduit Plug point ( 8 points / Coil) Higher End | 5 | Nos | - | - |
| 6 | Supply and fixing of 4.00 feet LED 18W Fitting with LED 18W tube (HigherEnd) complete with TW round blocks on wall or ceiling with PVC unsheathed FRLS Copper leads from terminals to the fitting | 8 | Nos | - | - |
| 7 | supply and fixing of 1200mm (48") sweep AC ceiling fan complete ( Higher end) with 2 module 100W fan step regulator (Higher end) with 1 metre down rod with fan clamp with side plates and cross arm of size 450mm (18") | 4 | Nos | - | - |
| 8 | Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels,
angles, plates and round bars etc. conforming to IS Specification including primer coating and enamal painting as per Design given by the departmental officers etc, complete as per standard specification | 2,155 | Kg | - | - |
| 9 | Fabricating supplying and fixing of pre painted galvanium colour sheets with the following specification. The materials should be of PPGI tile profile with a red colour or any other Approved design 0.47 mm thick 24 guage having width 1050 mm. The sheet should be G.I.base pre painted hot dipped galvanized iron sheet and to be fixed with shelf tappingscrews,plastic washer.The washer and screws to be fixed by using minute power machine drilled with out damaging the sheets paint coating to be regular modified polyster coat with zinc coating of Z 120GSM paint thickness the finish should be terra cotta finish like malabar mangalore tiles finish optional matt finish. The sheet to be fixed with making suitable corrugated,cutting the sheet in to the required ssize and making ornamental designs as per the site condition and as directed by the departmental officers. | 151 | Sqm | - | - |
| 10 | Add :- GST @ 18% | - | - | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.22 MB
TenderDocument.pdf
Tender Documents • 0.23 MB
ITB.pdf
Additional Documents • 0.09 MB
BOQ_849385.xls
BOQ • 0.32 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .