Addn/Altn to bldg No T-24 to T-26, Addtn/altn to cattle compound wall and certain REV work under GE (West) Mathura

Amount

Dismantling of ceiling boards of any type and any thickness including cover fillets complete all as specified and directed.

S&F 605X605 mm size of grid GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre / intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length ) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the internediate channel with connecting clips across the intermediate channel at 457mm centre to centre including providing and fixing 4mm thick everest designer ceiling board at size 600x600mm non combuttible material as per AS-1530 Part-3 of IS-14802 with fixing arrangment.

Dismantling asbestos cement corrugated or semi corrugated sheets as in roof covering, including ridges, hip, valleys and flashing etc complete all as specified and directed.

S&F Pre painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strenght of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Dismantling timber scantlings 40 sq. cm and over in section in framed work, in any position complete all as specified and directed.

S&F steel work in tubular trusses including columns, special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS.1161-1998 grade St-240 complete all as specified and directed.

S&F mild steel screw bolts (Machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 30cm long and diameter of neck in mm 12 to 20 complete all as specified and directed.

Demolition of brick work or stone/boulders masonary, built in cement mortor including all quoins, arches pillars, etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and as directed.

M&L for brick work with fly ash bricks straight or curved on plan exc 6 m mean radius built in CM (1:6) complete all as specified and directed.

M&L for Brickwork with fly ash bricks, straight or curved on plan to any radius in half brick thick walls built in CM (1:4) complete all as specified and directed.

S&F factory made steel windows, ISI marked, (Box Type) with side hung shutter including box type hinges with steel handle etc complete with glazing bars dovetailed or welded including one shop coat of Zinc chrome primer including making good disturbed surfaces of walls, complete all as specified and directed. Notes : Details of box type window shall be given on HQ CEJZ drawing No TD/2013/01 Sheet 1/3, 2/3, 3/3.

S&F factory made steel windows, ISI marked, (Box Type) with side hung shutter including box type hinges with steel handle etc complete without glazing bars dovetailed or welded including one shop coat of Zinc chrome primer including making good disturbed surfaces of walls, complete all as specified and directed. Notes : Details of box type window shall be given on HQ CEJZ drawing No TD/2013/01 Sheet 1/3, 2/3, 3/3.

M&L for structural steel work in rolled mild steel in framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete with Fe-410- W(Gde- E-250) quality complete all as specified & directed.

M&L for Hard drawn welded steel wire fabric cut to length wt n exc 4.0 kg/sqm, bent to shape required and tying with & including mild steel wire (annealed ) not less than 0.9-1.2 mm dia supplied & fixed to steel members complete all as specified and directed.

S&F for Stainless steel wire cloth.0.2-0.4mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples complete all as specified and directed.

M&L for Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks,coolar stand and similar work con- forming to Fe.290.Gde-E-165 including portions framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc complete all as specified and directed.

S&F Factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stile:), with particle board core and 2,4 or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front Face & 2mm Plain colour PVC sheet on back face, fixing in frame at site complete specification & drawing as per SSR complete all as specified and as directed..

S&F for factory made fully glazed/wire gauge (single piece both side) PVC prelam door shutter 33-35mm thick (style) consisting of frame made out of mild steel tubes of size 19x19mm (19 gauge) in style. Single piece plain coloured PVC sheet 5mm thick to be used to cover styles and rails. PVC sheet strip of 20mm width stuck inside width solvent cement for stiles and plain colour PVC sheet for top rail. Pannel will wire gauge and tighten firmly and fitted as manufacturer instruction including stainless steel wire cloth 0.25mm to 0.36mm nominal dia of wire and average width of aperture 1.4mm to 2mm and aluminium XPM in rhombus shape, in one piece from top rail to bottom rail as specified and directed Note: All screw shall be self tapping chromium plated”.

Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and directed.

M&L for Rendering 15mm thick on other than fair faces of brick work or concrete surfaces in cement mortar (1:4) and finished surface fair and even complete all as specified and as directed.

M&L for preparartion of old plastered surfaces of walls and applying one coat of distemper oil emulsion over a coat of alkali resistant primer and one coat of wall putty to achieve smooth finish on wall complete all as specified and as directed.

M&L for preparartion of new plastered surfaces of walls and applying two coats of distemper oil emulsion over a coat of alkali resistant primer and one coat of wall putty to complete all as specified and as directed.

M&L for preparation of new surfaces of walls and applying two coats of cement base paint over a coat of cement primer complete all as specified and directed.

M&L for painting to new wood or wood based surfaces of any description not otherwise described over 10 cm in width or girth including preparation of surfaces, priming with pink primer (one coat) finished with two coats of synthetic enamel paint complete all as specified & directed.

M&L for preparation of new steel surface of any description not otherwise described exc 10cm width or girth and applying two coats of synthetic enamels paints over a coat of red oxide primer complete all as specified & directed.

Dismantiling floor, hearth or wall tiling including cement mortar bedding (but not backing) rubbish off the premishes complete all as specified and directed.

Demolition of cement concrete ( unreinforced ) in ground floors and pavings not exceeding 15 cm thick above or below ground level complete all as specified and directed.

S&F coloured Non Skid ceramic tiles 7 to 8mm thick, (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of the tiles including and over 15 mm thick screed bed in CM (1:6) complete all as specified and directed.

M&L for Coloured Glazed ceramic tiles in vertical surface 450 x 300 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick plaster in cement mortar (1:4) complete all as specified and as directed.

M&L for 50 mm thick PCC type B-1, (1:2:4) using 20mm graded stone aggregate as in floooring finished cement concrete surface even and smooth without using extra cement including forming joints with 4 mm thick glass strip complete all as specified and as directed.

M&L for spike rolling to surfaces or making impressions of expended metal whilst concrete is green complete all as specified and directed.

M&L for cement concrete (1:2:4) type B2 using 20mm graded stone aggregate as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railigs upto 60cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, sligtly rounded or chamfered angles and throating, as directed including necessary form work complete all as specified and directed.

M&L for cement concrete (1:2:4) type B-1 as in surface channels and drains (using 20mm graded stone aggregate) complete all as specified and directed.

M&L for Neeru finish to plastering as specified complete all as specified and directed.

Taking up or down steel tubing and connection and removal to store 40mm bore pipe complete all as specified and as directed.

M&L for 40mm bore GI tubing medium grade with all fittings and fixed complete to walls/ceiling or laid in floors complete all as specified and directed.

S&F Pressed steel frame made out of MS Sheet 1.25mm thick for doors of size 105 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including one shop coat of priming complete all as specified and directed. Note:- During fixing of chowkhat, surface shall be make good in plumb with existing finishies like cement plaster simlar wall tiles, floor tiles etc as per site requirement.

S&F Aluminium alloy anodised sliding door bolt with hasp staple (bolt type) fixing clip of sheet, cast or exturded sections and fixing bolt and sliding bolt of extruded section or cast aluminium alloy and fixed length of bolt 250mm complete all as specified and directed.

S&F 200mm powder coated Anodised aluminium anodised barrel tower bolt of extruded section and fixed complete all as specified and directed.

S&F extruded Aluminium alloy handles fabricated type anodised of size 150mm long ISI marked complete all as specified and directed.

S&F 20mm GI pipe light weight pipe as in spout for cleaning of Haudi including plug and cutting holes, making good and fixing complete all as specified and directed.

M&L for 25mm thick PCC (1:2:4) type B0 (using 12.5mm graded stone aggregate) in floors as sub base for floor finishing complete all as specified and directed.

M&L for Non skid coloured ceramic tiles 9 to 10 mm thick area of each tile exceeding 0.18 sqm but n.exc 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match the tiles incl 15mm thick screed bed in cement mortar (1:6) for laying floor finishes complete all as specified and directed.

S&F hollow corrugated shape PVC wall lining consisting of 5mm thick decorative colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications all as specifed complete all as specified and directed.

Taking down Chowkhats or frames not exc. 1.5 sqm each with shutters (without taking off shutters from the frames) complete all as specified and as directed.

S&F for factory made window/ventilator steel rolled framed section of 1 to 1.25mm thick made of galvanized steel, box type hollow , Hollow P Sec incl grill made of 10mm Sq MS bars welded to 12mm x 6mm, MS flat @ 150mm c/c. Grill shall be welded to window frame. The complete unit Ref TD/2013/01 sheet 1/3 to 3/3 shall be a shop coat of zink chromate primer including the following :-. (a) Fly proof shutter shall provided with stainless steel 32mm gauge fly mesh of 304 Gde FE with 144 holes per square mesh. Glazed shutter and fixed glass portion shall be provided with glass of 4mm thick float glass. (b) Window frame shall be fixed to brick wall with by cutting holes and made good dismantled portion in PCC (1:2:4) type B1 four Nos hold fast block for each window/ventilator :- (i) Hold fast 150mm long of 20x3mm MS flat made to shape 4 Nos per window. (ii) Handle of Z Sec 20mm x 25mm, 100mm long – 1 No per leaf. (iii) Mild Steel tower bolt 150mm long - 02 Nos per leaf. (iv) Z Section 20mm x 25mm, 100mm long stopper - 1 No per leaf.

(v) Cleat 55 mm long of hollow square 15 x 20 x 63mm welded to hinge 01 No per leaf. (vi) MS pintle hinges size 75 x 12 mm 02 Nos per leaf. NOTE : During Fixing of Window, Surface shall be make good in plumb with existing finishes like cement plaster complete all as specified and directed.

Taking down Chowkhats or frames not exc. 1.5 sqm and n.exc 4sqm each with shutters (without taking off shutters from the frames) complete all as specified and as directed.

S&F Pressed steel frames for doors size 125x60mm with one or more rebates including necessary fixing lugs, 100mm stainless steel hinges, lock strike plate , etc including one shop coat of priming complete all as specified and directed. Note:- During fixing of chowkhat, surface shall be make good in plumb with existing finishies like cement plaster simlar wall tiles, floor tiles etc as per site requirement.

S&F 35mm thick membrane (0.3mm) door as per IS 2202 with both side design filled with soild particle board design and sample as approved by GE complete all as specified and directed. Make: Doormak(Jaipur)/Kalptaru (Vapi)/Timex (Vapi)

S&F for factory made fully glazed/wire gauge (single piece both side) PVC prelam door shutter 33-35mm thick (style) consisting of frame made out of mild steel tubes of size 19x19mm (19 gauge) in style. Single piece plain coloured PVC sheet 5mm thick to be used to cover styles and rails. PVC sheet strip of 20mm width stuck inside width solvent cement for stiles and plain colour PVC sheet for top rail. Pannel will wire gauge and tighten firmly and fitted as manufacturer instruction including stainless steel wire cloth 0.25mm to 0.36mm nominal dia of wire and average width of aperture 1.4mm to 2mm and aluminium XPM in rhombus shape, in one piece from top rail to bottom rail as specified and directed Note: All screw shall be self tapping chromium plated”.

M&L for PCC (1:2:4) type B1 using 20mm graded aggregate) as in bed block for fixing of hold fast , filling in chowkhat or any other purpose complete all as specified and directed.

S&F 100mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F 150 mm MS ordinary rat tail rod pattern spring including roller & roller plate complete all as specified and directed.

Excavation in trenches not exc. 1.5m wide and not exc. 1.5m in depth for foundation and getting out in soft / loose soil including forming & drainage bottom to reqd slope & shape complete all as specified and directed.

M&L for cement concrete type D-2, (1:4:8) using 40mm graded aggregate as in foundation filling and mass concrete complete all as specified and directed.

Surface excavation n.exc 30 cm deep and averaging 15 cm deep getting out soft / loose soil complete all as specified and directed.

M&L for hard core of guage not exc. 63mm deposited spread and levelled in layers not exc. 15 cm thick, watered and rammed to a true surface using broken stone or boulders complete all as specified and directed.

M&L for 75mm thick cement concrete type C-2, (1:3:6) using 40mm graded stone aggregate as in sub base of floor complete all as specified and directed.

M&L for Machine cut kota stone slab flooring 18-20 mm thick laid and jointed with pigment to match the shade of the slab including rubbing and polishing including screed bed 20mm thick in CM (1:4) for laying finishes complete all as specified and directed.

M&L 75mm thick PCC (1:3:6) type C-2, (using 40mm graded stone aggregate), as in plinth protection finished even and smooth w/o using extra cement complete all as specified and directed.

Returning, filling, in including spreading, leveling, watering and well ramming in layers not exc 25cm in soft/loose soil complete all as specified and directed.

Removing excavated soil n.exc 50 Mtr and depositing where directed at a level n.exc 1.5 Mtr above the starting point complete all as specified and directed.

M&L for 1.00mm thick Mild steel, plain black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed.

M&L for 60mm thick Machine pressed factory made precast cement concrete interlocking paver blocks with using grey cement and no pigment of Grade M-35 of any size & shape confirming to IS 15658-2006 as directed such as I-shape, Uni, Octagonal, Three-X, Dumble, Zig Zag etc complete all as specified and directed.

M&L for 100 mm thick Cement concrete type D-2, (1:4:8) using 40 mm graded stone aggregate as in sub base complete all as specified and directed.

Excavating in post holes (or similar holes) each n.exc 0.5 Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25 cm, watering and removing surplus soil to a distance n.exc 50 m and making good surface in soft/loose soil complete all as specified and directed.

M&L for PCC (1:3:6) type B-1 using 20mm graded stone aggregate as in bed plates of vertical steel posts etc and similar works including necessary form work complete all as specified and directed.

M&L for compound girder / single stanchions , built up of one beam or channel section with one plate etc confirming to Fe-410 (Gde-E-250) complete all as specified and directed.

Supply and laying of XLPE insulated PVC cabe of size 25sqmm 4 core 1100 volts grade in trenches/floors/roof/ceiling/pole for house service wire alongwith 4 mm GI wire including insulation of 25 sqmm 4 core and by providing proper hook and in PVC conduit inside of building complete all as specified and directed Note:- Earth work and other connected work shall be measured and paid sperately.

M&L for sand cushioning and covering clean and dry sand to underground electric cable in trenches / floor complete all as specified and directed. Note :- Punned thickness shall be measured and paid for.

M&L for brick covering to underground electric cable using sub class "B" old size brick laid dry flat per pendicular to the direction of cable complete all as specified and directed.

M&L for 50 mm bore galvanised steel tubing, light grade for protection of cable on poles/walls/ under road crossing/trenches complete all as specified and directed.

S&F Steel water tubing medium grade galvanised with all fittings including short lengths, laid in trenches complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore dia 25mm complete all as specified and directed.

Excavation in trenches not exc 1.5 mtr wide & not exc. 1.5 mtr in depth for foundation etc or for shafts, wells ,cesspits, manholes, pier holes ,etc n exc 10 sqm on plan and n. exc 1.5 m in depth and getting out in hard/dense soil complete all as specified and directed.

All as per Item No 76.00 (here-in-before) but exc. 1.5 M deep and n exc. 3 M deep.

S&F gun metal globe or gate valve, with iron wheel head, screwed both ends for iron pipe and fixed of size 25mm complete all as specified and directed.

M&L for cutting existing steel tubing for alterations or additions(each cut measured) in position without taking out of size 100/150mm dia complete all as specified and directed.

S&F rotational moulded polyethylene water storage tank white colour (cylindrical vertical with closed top) hoisted and fixed in position to make up for solar water heater of 1000 Ltr capacity complete all as specified and directed.

S&F float valve of 20 mm dia ball brass valves, high pressure with polythene float and flynut complete, screwed for iron pipe or brass ferrule complete all as specified and directed.

Supply , installation, testing and commissioning AIRKAA 3G-Eco Coolers-Made of industrial grade PP cabinest. Low sound and 3G Honeycomb cooling pads for good cooling efficiency of upto 80%, 100% Coper Motor, Three phase single speed, comes with RCT- Remote Tank cleaning technology. Long Airflow of upto 150 feet complete all as specified and directed. Model AIRKAA 30 K (30000 CMH Airflow) or equivalent make approved by GE.

S&F Rectangular GI Duct made out of 22 SWG GI Galvanized sheet ISI marked and duct of design will be as per specification of manufacturer and approved by GE/Engr-in - Charge complete in all respect designing, febrication and installations with all connecting materials as per site requirement.

S&F Rectangular GI Duct made out of 24 SWG GI Galvanized sheet ISI marked and duct of design will be as per specification of manufacturer and approved by GE/Engr-in - Charge complete in all respect designing, febrication and installations with all connecting materials as per site requirement.

S&F aluminium powder coated grill 2' x 1' or as designed by manufacturer ( 2 with one off) complete as per design recommendation complete all as specified and directed.

Taking down surface / concealed copper / aluminium point wiring (light,bell,fan,socket or power) complete, including fixtures and fittings such as switches,ceiling roses,lamp holders,pendants,sockets, regulators,tubelight fittings etc and making good disturbed surfaces with plaster on walls, floors etc complete all as specified and directed.

M&L for point wiring with PVC insulated, unsheathed 1.5 sqmm FRLSH multistrand copper conductor cable 1100 volts grade drawn into and including rigid non metallic PVC concealed conduit medium grade not less than 20 mm dia ISI marked ivory colour with and including all conduit fittings and fixing accessories including not less than 1.60mm thick sunken anodised pressed steel terminal boxes/modular boxes suitable for fixing of modular face plates, 3.0 mm thick hylam sheet cover/modular plate cover for mounting switches, sockets, fan regulators etc incuding 1.5 Sqmm FRLSH multistrand copper conductor cable as continuous earth wire complete for the following:- (a) one light point controlled by one switch

All as per item No 87.00 (here-in-before) but for one fan/exhaust point controlled by one switch.

All as per item No 87.00 (here-in-before) but for one 3 pin socket outlet 5amps point controlled by one switch on the same board with other switches.

All as per item No 87.00 (here-in-before) but for one 3 pin socket outlet 5amps point controlled by one switch on independent board.

M&L for point wiring with 2.5 sqmm PVC insulated, unsheathed FRLSH multistrand copper conductor cable 1100 volts grade drawn into and including rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all and including conduit fittings and fixing accessories 1.60mm thick sunken anodised pressed steel terminal boxes with 3.0 mm thick hylam sheet cover for mounting switches, socket etc including 2.5 Sqmm FRLSH multistrand copper conductor cable as continuous earth wire complete for one socket 16 Amp socket outlet controlled by one switch on independent board.complete all as specified and directed.

S&F switch piano flush button single pole, one way 6 Amp 240 Volt complete all as specified and directed.

S&F socket outlet 3 pin 5/6 Amps flush type complete all as specified and directed.

S&F switch piano flush button single pole, one way 16 Amp 240 Volt complete all as specified and directed.

S&F socket out let ,3 pin 5 /15 amps multi purpose 2 in 01 flush type 230 volt complete all as specified and directed.

S&F fan regulator electronic, stepped type hum free suitable control speed of fan from 0 to 100 % and connecting electrically all as required complete all as specified and directed.

S&F Angle/ battan holder polycorbonate type body suitable for batten fitting complete all as specified and directed.

S&F ceiling rose of 65x50mm PVC/polycarbonate three terminal surface bakelite complete all as specifiend and directed.

S&F LED bulb base B22 of capacity 10 watts not less than 700 lumens output at 6500K colour temp, complete all as specified and directed. Make : Havells Cat Part No LHLDERUEML8X010 or equivalent make of Philips/CG

S&F surface and wall mounted 10 watt LED batten, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver for mirror light complete all as specified and directed.

S&F Endura Linear 18W LED Wall mounted LED batten with LED rod 6000K extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver complete with all accessories, complete all as specified and directed.

S&F in repair building security light of 30 Watt Endura CITY LITE PLATINUM New generation energy saving & environmental friendly long life Versatile pressure die-cast aluminium IP66 roadway luminaire with high power LEDs as light source and electronic driver including all fixing arrangements complete all as specified and directed. Make: Havells cat part No. LHEWEBP7PL6S030 or equivelant item of other specified makes.

S&F 10W integrated LED bulk head luminaire environment friendly, ultra modern, energy saving, surface mounted decorative oval bulk head edge-lit Model -ENDURA RUGBY NEO, IP65 protection with LED light, complete all as specified and directed.

S&F ceiling fans 1200mm sweep white in colour of Aluminium blades (three numbers) and body, double ball bearing, down rod, fan motor, pair of canopy shackle, assembly kit, etc suitable for SP 230 to 250 volts, 50 Hz, AC supply complete all as specified and directed. Make : Havells CAT No ES-50 Premium 5 Star (enery saving fan) or equivalent model of make in appx 'B'

S&F exhaust fan AC single phase 230V/240V, metal type 300 mm sweep with louvers and all connected accessories complete all as specified and as directed.

M&L for making of hole in brick wall including removal of dismantled materials, making good disturbed surface, plastering, making holes fixing bolts suitable for fixing 12" exhaust fan frame, complete all as specified and directed.

M&L for in repair submain wiring with single core PVC insulated FRLSH multistranded copper conductor cable of size 2x6.0 Sqmm drawing into and including rigid non metallic PVC conduit, medium grade not less than 20mm dia ISI marked ivory colour with all conduit fittings and fixing accessories and 1x6.0 Sqmm FRLSH multistranded copper conductor cable as continuous earth wire, complete all as specified and directed. Note : Two runs of 6 Sqmm cable, one run of 6 Sqmm earth conductor and one run of PVC conduit of 20mm dia shall be measured and paid as one unit length.

M&L for cutting chases, pining in making good to facing where required and pointed in CM (1:3) to ends or edges of landing , steps cills, sun shade, shelves etc and cutting chases for concealed conduit wiring etc and making good , match with existing surfaces by applying white/colour wash cutting not exc 10cm girth complete all as specified and directed.

S&F in repair factory made sheet metal enclosure MCB DB TPN 4 way with 200 amps rated bus bar 415 volts double door with isolated neutral bar and shrounded bas bar IP protection 43 having door earthing complete all as specified and directed

S&F in repair sheet metal enclosure MCB distribution board single pole & neutral 240 volts 8 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed.

S&F MCB TPN 415 volts, 63 Amps, 10KA, 'C' Curve complete all as specified and directed.

S&F MCB SPN 240 volts, 32 Amps, 10KA, 'C' Curve complete all as specified and directed.

S&F MCB SP 240 volts, 5-32 Amps 10KA, 'C' Curve complete all as specified and directed.

Taking down carefully existing ceilling/exaust fan any type, sweep and removing fan blade including cleaning all dust particle and filling cavities with filler material, oiling ,greasing including painting fan with blade complete one coat of synthetic enamel white paint by spraying and assemble the same along with all fixing connecting accessories and fixing the same position along with all new electrical wire connection complete all as specified and directed.

M&L for in replacement Earthing complete with galvanised steel earth plate electrode 600x600x 6mm thick , directly in the ground vertically to depth not less than 2.25 mtr below the ground level with top edge of earth plate surrounded by 15cm thick layer of chorcoal dust and common salt. connected to galvanised iron earthing wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel , GI pipe light grade 40mm bore for protection of earth lead and GI watering pipe 20mm bore light grade with funnel and wire mesh, PCC chamber in cement concrete (1:3:6) type C1, 80mm thick pre cast RCC (1:2:4) type B-1 cover reinforced with hard drawn steel wire fabric 50mm mesh size and 3.0 mm dia of wire each way, earth plate surrounded by alternate layres of packed chorcoal salt packed which shall be not less than 15 cm in all sides of earth plate all as shown in electricale Plate No-3 MES Sch Part-I, complete all as specified and directed. Note :- The unit rate includes for protection pipe and GI wire 4mm dia from top of earth plate up to 7.5 meter above ground level.

S&F sheet metal enclosure Single pole & neutral with 2 pin and earth plug capacity and socket 20A 240 Volt complete with one single pole MCB of 20 A complete all as specified and directed. Make : Havells Cat Part No DHDCUSN020 or equivalent make in Legrand/Standard.

Supply and installing Water heater storage type, electric complete of capacity capacity 25 litres, complete all as specified and directed. Make: Havells Model: Monza EC or equivalent in Philips/ Bajaj/ Crompton Greaves

M/s Kartar Singh Construction Co.

M/s Hoti Lal Contractor

Jain construction co

M/S PREETI CONSTRUCTION