SPECIAL REPAIRS TO BUILDING NO P80 40 SINGLE OFFICERS ACCOMMODATION AT INHS ASVINI UNDER AGE I ASVINI 2ND CALL

Amount

Taking down cement or cement lime plaster on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water, etc all as specified and as directed by Engineer-in-Charge

Dismanting wrought iron or mild steel work of any description all as specified and as directed by Engineer-in-Charge

Material & labour for sand faced cement plaster 20 mm thick in two coats using factory manufactured pre mix/ready mix of ('Roofit Mix' of M/s Premier Floor to Roof Materials pvt.ltd/ 'Easy plast' of M/s Walplast Products pvt.ltd/ 'Readiplast' of M/s Ultratech Cement Ltd/'Soundplast PMC-1' of M/s Sound buildcare pvt.Ltd/ or other approved equivalent make) having minimum composition of C:S (1:4) using fully treated dry, well graded natural sand conforming to IS 383 suitable for external plastering, having low rebound properties, low water demand for curing properties, mechanical mixing with water in a metalic tray only to make good consistency as per the specification of the Manufacturer and applied over exterior masonry and concrete surfaces with base coat of 12 mm thick and finishing coat of 8 mm thick final rendering,including using richer mix for making corners if necessary, at all floors and level, including making grooves of existing size wherever required, including cleaning the surfaces, curing etc complete all as per specified & as directed by the Engineer-in-Charge

Material & labour plastering 15 mm thick on other than fair faces of brickwok or concrete surfaces of wall in cm 1:6 and finishing the surface even and smooth without using extra cement and finally providing sagol finish 1mm thick complete all as specified and as directed by Engineer-in-Charge

Material & labour cement plaster 10 mm thick as in ceiling in CM (1:3) finished even and smooth, one coat using factory manufactured pre mix/ready mix of 'Roofit Mix'of M/s Premier Floor to Roof Materials pvt.ltd/ 'Easy plast' of M/s Walplast Products pvt.ltd/ 'Readiplast' of M/s Ultratech Cement Ltd/'Soundplast PMC-1' of M/s Sound buildcare pvt.Ltd/ or other approved equivalent make, ,including using richer mix for making corners if necessary, at all places and level, including making grooves of existing size wherever required, including cleaning the surfaces, curing etc. complete all as per specified & as directed by the Engineer-in-Charge

Providing and erecting steel props with 'U' jack, upto 15' (feet) height including continuous wooden runner (2'' x 3'') resting on wedge to support the structure provisonally during repair and jacketing etc and maintenaning them in position till the completion of work and as specified and as directed by Engineer-in-Charge

Material & labour for chipping, removing carefully concrete work by low impact hammer, breaker without damaging the structure and cleaning and disposal of debris out side the premises etc complete as directed by Engr-in-charge. Hard concrete should not be removed by force.

Material & labour for cleaning existing reinforcement with wire/rotary wire brush, making the surface free from loose material dirt etc, complete applying two coats of alkaline rust converting primer (i.e. rust remover) FEOVERT conforming to ASTM-B-117, on the rebars (measurement shall be on the basis of exposed concrete) (Make : Feovert of Krishna Conchem, Roff rust cleaner of Pidilite, Dr Fixit Rust remover, Shali Rust Off of STP Ltd)

Material & labour for providing and applying two coats of anti-rust protective coating in the form of Acrylic Polymer mixed with Cement in (1:1.5) proportion (1 part polymer and 1.5 parts Cement) on rebars after cleaning of rust scales as per manufacturers instruction (measurement on the basis of exposed concrete area). (Make :- IPNET of Krishna Conchem, New Coat from Dr Fixit )

Material & labour for providing and applying structural grade EPIBOND-21-LP prior to application of any type of mortar plaster or micro concreting conforming ASTM-C-882-91 (Arizona Slant Shear Test) to ensure bonding between old concrete and new concrete

Material & labour for providing and applying jacketting around columns/beams with micro concrete (Molith-MC) M-40 including all lifts, drilling holes and fixing shear anchor as per specification complete. (Make : Micro concrete of Dr. Fixit or equivalent) (Note : (a) Reinforcement shall be measured and paid seprately)

Use and wase of formwork to sides of pillars, posts, struts, piers, columns and stanchions

Material & labour mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

All as per item No 13 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders"

Material & labour for building up the profile of structural members by using latex additives (monobond) modified air cured mortar system (Polymer modified mortar) (1:5:15 = 1 monobond-5 cement-15 sand) in damaged areas in 30 mm thickness including levelling profiling etc complete

Material & labour for replacement of steel reinforcement with TMT bars of appropriate size where 20 % of cross section is reduced including dismantling of rusted steel including application of rust convertor FEOVERT and applying protective coating IPNET - R B complete all as specified and as directed by Engineer-in-Charge

Material & labour Pre-cast cement concrete block masonry with solid blocks, Type B-1 (1:2:4) using 20 mm graded aggregate exceeding 10 cm in width and setting in mortar (1:4), complete by Engineer-in-Charge

Complete removal of exisiting water proofing treatment of roof including demolition of brick bat koba/pcc padding of any thickness , cleaning with wire brushes etc and removal of debris outside MD land by Engineer-in-Charge

Material & labour PCC (1:2:4) type B-O (12.5 mm graded agg) in roof kerbs or mud stops, levelling coarses of roof to provide required slope, rounded or chamfered on edge average thickness not more than 75mm complete all as directed by Engineer-in-Charge

Material & labour 10 mm thick cement plaster in cement mortar (1:4) mixed with water proofing compound as per manufacturer's instruction over PCC padding over roof complete

Complete removal of existing treatment of wall by washing, rubbing down complete

All as per item No 21 above but of ceiling

Preparing new or old plastered surfaces of wall and applying two coats of oil bound distemper over a coat of chalk whitening with wall care putty complete (Make :- Asian paints/Nerolac paints/Shalimar Paints)

Preparing new or old plastered surfaces of wall and applying two coats of white wash

Preparing new or old plastered surfaces of ceiling and applying two coats of white wash including preparation of surfaces complete all specified and directed

Material & labour two coat of acrylic paint exterior grade (100%Acrylic) over a one coat of primer including prepartion of newly plasterd surfaces of walls etc all specified on external surfaces (Make : Asian Paint (Apex)/Nerolac (1st quality)/Dulux (weather shield)

Preparing wood or wooden surfaces over 10 cm of width or girth and applying two coats of synthetic enamel paint over a coat of pink primer (Make : Asian paints/Nerolac/Jenson and Nicholson)

Preparing old previousely treated wooden surfaces over 10 cm of width or girth and applying one coat of synthetic enamel paint (Make : Asian paints/Nerolac/Jenson and Nicholson)

Preparaing of old steel surfaces of any description and applying one coats of synthetic enamel paint (Make : Asian paints/Nerolac/Jenson and Nicholson)

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

Material & labour Non - skid coloured ceramic tiles of size 300mm x 300mm x 6 to 7 mm thick in floors over and including 20 mm thick screed bed in cement mortar 1:4 etc. set and jointed in neat cement slurry and grouted with Epoxy grout to match. Make : Kajaria/Somany/Johnson

Material & labour glazed ceramic tiles in vertical surface 300 x 450 x 7 mm thick set and jointed in neat cement slurry over and including 10 mm thick cement plaster in cment mortar (1:4) and pointed in white or colour cement to match. Make :- Kajaria/ Somany/ Johnson

Supply & fix Vitrified Ceramic tiles any colour, polished area of each tiles not exceeding 0.36 sqm in floors set jointed and pointed with epoxy grout to match the shade of in coloured cement slurry in flooring with and including 20mm cement sand screed in cement mortar (1:6) complete all as directed

All as per item No 33 above, but as in skirting with and including 15mm backing coat in cement mortar (1:4) complete all as directed

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exceeding 10 cm girth all as specified and as directed by Engineer-in-Charge

Cutting & screwing existing steel tubing for altn or addn 15mm dia

Material & labour for 15mm dia medium grade pipe with all fittings fixed to wall including taking down of existing steel tubing

Cutting & screwing existing steel tubing for altn or addn 20mm dia

Material & labour for 20mm dia medium grade pipe with all fittings fixed to wall including taking down of existing steel tubing

Supply & fix in repair Overhead shower 120 mm dia round shape single flow with cascade effect complete all as directed

Supply & fix in repair Vitreous China wash basin, white, flat back, size 550 x 400 mm excluding water taps waste chain plugs and porcelian stopper but including brackets all as specified and as directed by Engineer-in-Charge (Make : Hindustan /Parryware /Cera)

Material & labour in repair for 10 ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets in repairs (Make : Commander/Parryware/Cera)

Supply & fix vitreous china wash down closet pan (pedestal pattern) white (excluding flushing cistern and flush pipe) including P/S trap all as specified and as directed by Engineer-in-Charge

Supply & fix CP brass pillar tap 15mm, screwed down high pressure fancy type all as specified and as directed by Engineer-in-Charge

Supply & fix in repairs bib tap chromium plated brass fancy type 15mm with crutch or butter fly handle all as specified and as directed by Engineer-in-Charge

Supply & fix in repairs 15mm CP fancy type stop cock with long shank and cup concealed type all as specified and as directed by Engineer-in-Charge

Supply and fix 15mm dia angle valve, brass chromium plated fancy type complete all as specified and directed

Taking down chawkhats or frame (without taking off shutters from the frames) but not exceeding 1.50 each all as specified and as directed by Engineer-in-Charge

Taking down chawkhats or frame (without taking off shutters from the frames) but exceeding 1.50 but not exceeding 4.00 Sqm each all as specified and as directed by Engineer-in-Charge

Taking down shutters of any descriptionexc 1.00 but not exceeding 2.00 Sqm each all as specified and as directed by Engineer-in-Charge

Supply & fix 2nd class hard wood plain, solid straight chowkats and frames, wrought framed, rebated on the solied, rounded or chemfored, put together with glue pinned at joints all as specified & as directed by Engineer-in-Charge

Supply & fix MS holdfast, wall ties and semilar articles confirming to Fe-410-0 or Fe-310-0.

Supply & fix 30 mm thick 2nd class HW factory made, kiln seasoned pressure treated door gauged & skeleton shutter 35 mm thick open rebated & prepared to receive glass, gauge etc, without sash bar, fitted with cut & mitred beads, for securing glass/ gauze etc. Size of shutter members as specified in SSR Part-I sec-8.2(a) all as specified and as directed by Engineer-in-Charge (Make: Doorking/Betul wood products/Prince Timbers)

Supply & fix 2nd class hard wood 35mm thick factory made plain framed, panelled shutters (two panels) with lock rail and panel of 9mm BWP commercial or 12mm veneered particle board with commercial veneer on both faces the size of rail and stile as per IS 1003 (Part-I) kiln seasoned and chemically pressured treated. (Make: Doorking/Betul wood products/Prince Timbers)

Supply & fix solid PVC door frame of size 50mmx47mm made out 5mm plain colour PVC sheet reinforced with MS square tube made as per specification and drawing. (Make : Sintex/Rajshree/Accucell)

Factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. (Make : Sintex/Rajshree/Accucell)

Material & labour aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples or wooden/ aluminium beadding all as directed.

All as per item No 60 above but in repairs

Supply & fix 100mm size stainless steel butt hinges.

Supply & fix 150 mm long aluminium anodised barrel tower bolts of extruded section

Supply & fix 125mm size extruded aluminium alloy handles, fabricated type anodised.

Supply & fix aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed of length 300 mm

All as per Item No 65 above but fixed in repairs

Supply & fix 150mm aluminium anodised barrel tower bolts of extruded section fixed in repairs.

All as per Item No 67 above but 100 mm

Supply & fix 125 mm extruded aluminium handles, fabricated type anodised fixed in repairs.

All as per Item No 69 above but 100 mm fixed in repairs

Material & labour 150 mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor in repairs all as specified and as directed by Engineer-in-Charge

Material & labour PCC (1:3:6) type CI (20mm graded aggreegate) for fixing of hold fast all as specified and as directed by Engineer-in-Charge

Taking down cast iron soil waste pipe (any size or patterns) moulding all fittings heads, shoes, bends etc (Measured over all as fixed along the center line over fittings and accessories).

Supply & fix 100mm bore sand cast CI soil, vent, and waste pipes in any length with or without ears with cement joints fixed to wall with Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof all as specified and as directed by Engineer-in-Charge

All as per item No 74 above but fixing only .(Pipe retrived from item No 73 shall be re-used)

Supply & fix 75 mm bore sand cast CI soil, vent, and waste pipes in any length with or without ears with cement joints fixed to wall with Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof

All as per item No 76 above but fixing only .(Pipe retrived from item No 73 shall be re-used)

Supply & fix CI bend any radius with oval access door 100mm bore.

Supply & fix CI bend any radius with duck's foot rest 100mm bore.

Supply & fix CI bend any radius with oval access door 75 mm bore.

Supply & fix CI branch pieces, single (equal or unequal) 100 mm bore with oval access door.

Supply & fix CI branch pieces, double (equal or unequal) 100 mm bore

Supply & fix CI branch pieces, single (equal or unequal) 75 mm bore with oval door.

Supply & fix CI cowls 100mm bore with cement joints.

Supply & fix CI cowls 75 mm bore with cement joints.

Taking down AC/PVC rain water pipes of any size or pattern incl all fittings.

Supply & fix PVC 110mm bore pipes in any length with rubber ring joints fixed to wall with dash through fastners and clamp of 25 x 3mm including all fittings like sockets, bend, junction, elbow etc. (Make :- Supreme/Prince/Kissan)

Supply & fix 110mm PVC (SWR) bends. (Make : Supreme /Prince/ Kissan)

PVC (SWR) branch piece, Single (single Y) equal or unequal for 100 mm bore. (Make : Supreme/Prince/Kissan)

Supply & fix 100mm bore CI floor trap with gratings incl jointing to waste pipe in run lead.

Supply & fix PVC stainless steel grating 125mm dia, all as spd & directed.

Supply & fix 32 mm bore low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 including all necessary bends and Ts etc complete fixed to wall or laid on floors

Material & labour 32mm galvanised tubing medium grade as in spout pipe each 50 cm long, cutting to shape as required, cutting through wall of any thickness, fixing in PCC (1:2:4) tpe B-1 making good the damaged portion by rendering in CM (1:4) and finished the surface to match the existing surface complete all as specified.

Supply & fix PVC connectors of 15 mm size with PTMT nuts of length 600 mm length

Supply & fix PVC waste pipe of 32 mm dia 600 mm length

Supply & fix Aluminium anodised section 15 micron for window / ventilator etc of anodised aluminium section sliding type comprising frame, shutters, locking system/ arrangements including necessary jamming, glazing pins, neoprene beading, glazing pin screw, rollers, handle etc complete all as specified & directed. Note :- (a) Glazing and wire mesh shall be measured separately. (b) Item shall be paid as per weight of aluminium section. (c) Rate quoted shall be inclusive of neoprene beading, glazing clips, screw, locking system etc as required which not be measured for arriving the weight. (d) Rate shall be inclusive of the aluminium handle, locking arrangement including complete packing with silicon gel around contecting surface of aluminium and including matching the existing surface area complete all as specified. (e) Aluminium window / ventilator etc to be fixed with cadmium plated screw not more than 300mm c/c .

Supply & fix in repairs anodized aluminium DECO grills 7.5mm thick, as existing grills, DG - 102 including necessary aluminium annodised "U" or "F" channel

Material & labour 6.30 mm thick ordinary quality sheet glass as in sliding glass for kitchen cabinets complete including fixing of stainless steel rollars (Note : Stainless steel rollars shall be measured and paid separately )

Material & labour for Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc.

Supply & fix 32 mm coupling half threaded with 80 mm height Make :- Jaquar ALD 709 or equivalent

Supply & fix wall Mixer 3-in-1 system with Provision for bath overhead shower complete with 115 mm Long bend pipe, connecting legs & wall flange (without Over head shower) (Make :- Jaquar FUS-CHR-29281

Taking down unserviceable copper /aluminum point wiring of light / fan / sockets complete, including all fittings and fixtures,removing materials from site and making good to disturbed surface of walls, floors etc all as directed.

Taking down carefully by unscrewing from the boards, out lets boxes/ceiling/walls the fittings and fixtures such as switches,sockets,ceiling rose, fan regulators,lamp shades lamp holders, tube light, bulk head fittings etc of any type/size and capacity

Taking down carefully main switch/MCB,MCB DB's of any make and type including teakwood board etc complete and making good the disturbed surfaces.

Taking down unserviceable sub main wiring of any size and making good the disturbed surfaces.

Material & labour point wiring with 1.5 Sqmm copper conductor (multistranded), fire retardent , single core PVC insulated, unsheathed, 1100 volt grade cable conforming to IS- 694 part I in and incl PVC casing and capping with all accessories and terminated in PVC moulded box, duly earthed with PVC insulated 1.5 Sqmm copper conductor cable in green colour for earth continuity conductor to earth dolly complete as specified for one light / fan point / bell point controlled by one switch

All as per item No 107 above but for 5 A switch socket combition on independent board all as directed

All as per item No 107 above but for one 3 pin 5 amp socket on same board all as directed .

Material & labour point wiring with 2.5 Sq mm copper conductor (multistranded), single core PVC insulated, unsheathed, 1100 volt grade cable conforming to IS- 694 part I in and incl PVC casing and capping with all accessories and terminated in PVC moulded modular box, duly earthed with PVC insulated 1.5 Sqmm copper conductor cable in green colour for earth continuity conductor to earth dolly complete as specified for one 6 pin 5/15 Amps switch socket combination on independent board.

Supply and fix bell 230 V 50 Hz SP AC all as directed

Supply and fix Bell push, flush type, 5 amp, all as directed

Supply & fix Switch piano flush modular type, single pole one way 5 amps all as directed .

Supply & fix Ceiling rose , surface bakelite 65x50mm , two to three terminal. all as directed.

Supply & fix switch and socket modular type 2 in 1, 6 pin 5/15 amp flush type all as directed.

Supply & fix switch and socket modular 2 in 1, 6 pin 5 amp flush type universal all as directed.

Supply & fix socket modular 2 in 1, 6 pin 6 amp flush type all as directed.

Supply & fix wall mounted LED light fitting 20 watt Model No BNO21C LED 20S PSU of make philips,CG, Bajaj all as directed.

Taking down ceiling fan of any size/sweep after disconnecting the wire from existing ceiling rose including Supply and fixing the new ceiling fan all as directed by Engr-in-Charge. Note :- Old ceiling fans handed over to MES Stores

Taking down and refixing existing hanging wires any type putting in to casing and capping of any size refixing by securing the same by suitable fixing accessories all as directed. Note:- Many wires put in same casing patty will be measured as the one length of cassing patti.

Supply and fix Tubes medium 'galvanised, with all fitting and fxture of size 40 mm dia and fixed complete to walls and ceilings or angles all as directed.

Supply & fix sub main wiring with PVC insulated cable 2 single core 4 sq mm 1100 V grade with stranded copper conductor on and including rigid PVC casing capping (ISI marked) including all specials like joint elbow, Tee ,junction , bend etc and provision of PVC insulated copper conductor one single core 2.5sq mm for earth continuity all as directed.

Supply and fix MCB DB TPN 8 way vertical load line double door type sheet metal clad powder coated enclosure 415 V complete with bus bar, neutral links, blanking plates, prewired all as per DHDLVDRWGOFO08 of Havells or equivalent in Schnider, Legrand all as directed. (Note :- MCCB and MCBs has been considered separelely).

Supply and fix MCBDB SPN 4 way vertical load line double door type sheet metal clad powder coated enclosure 230 V complete with bus bar, neutral links, blanking plates, prewired all as per DHDPSHODRC04 of Havells or equivalent in Schnider, Legrandall as directed. (Note :- MCBs has been considered separelely).

Supply and fix MCBDB SPN 8 way vertical load line double door type sheet metal clad powder coated enclosure 230 V complete with bus bar, neutral links, blanking plates, prewired all as per DHDPSHODRC08 of Havells or equivalent in Schnider, Legrandall as directed. (Note :- MCBs has been considered separelely).

Supply and fix MCB SP 240V, 50 Hz, 10 KA 6-32 A Make Havells or equivalent in Schnider, Legrandall as directed

Supply and fix MCB SPN 240V, 50 Hz, 10 KA 20-32 A Make Havells or equivalent in Schnider, Legrandall as directed

Supply and fix regulator electronic step and modular box type 230 V 50 HZ Make Anchor, Havells or equivalent in Schnider, Legrandall as directed.

Supply and fix cable 1100 V grade 4 core 10 Sqmm aluminium multistranded XLPE insulated all as directed.

Supply and fix cable 1100 V grade 2 core 6 Sqmm aluminium multistranded XLPE insulated all as directed.

Supply and fix MCB TPN 63 A 10 KA all as directed.Make Havells or equivalent in Schnider, Legrandall as directed

ORIENT ELECTRIC CO

Darpan Construction

AGRAWAL ASSOCIATES

SHREE JAGDISH FURNITURE CO.

Shetty Construction Co