SITC of 25 KVA Diesel Generator Set to the Zonal Fisheries Office at Sea Shore Road under Directorate of Fisheries Department under Section II of EandM Sub-Division, Workshop Division, APWD, Port Blair

Amount

Supplying , installation, testing and commissioning of 25 KVA DG Set equivalent to Make :-"MAHINDRA POWERROL" Make, Model 3385 ELSTCGM-C2, 38.6 HP @ 1500 RPM, 3Cylinder, Vertical, Water-Cooled Engine coupled with CG/LS Make AC Alternator, Three Phase, 415 Volts, 50 Hz @0.8P.F, Turbo charged Inter-cooled Aspiration , Self-regulated to run at 1500 RPM 20KW/25KVA DG Set with Acoustic Enclosure (sound proof) as per Central Pollution Control Board (CPCB-II) approved DG Set with control panel battery operate as manual , battery cables , keys and other accessories or equivalent in KIRLOSKAR GREEN/Ashok Leyland

Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc including form work etc as required.

Supplying, Installation, testing and commissioning ofEarthing with ASHLOK make SEE brand safe earthing electro type-19, 48mm dia,length 2 mtrs equivalent by filling inner space with 50 Kg ( 2 bags) Electrodite (Back fill compound) required for safe earth electrode and providing masonary enclosure with C.I cover plate having locking arrangement etc. as required.

Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.

Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required.

Supplying of PVC insulated and PVC sheathed aluminium conductor armoured XLPE power cable of 1.1KV grade of following sizes etc as required.Make; Havells or equivalent in Polycab/Finolex/RR cables /Anchor

a) 3.5 Core x 35 Sqmm

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc. , complete as required.

a) 40 mm dia (OD-40 mm & ID-32 mm nominal)

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.

a) Upto 35 sq. mm

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

a) 3½ X 35 sq. mm (32mm)

Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling etc as required

a) 50 mm dia

Supplying and fixing of 100A, 4 way wall mounted Busbar chamber Make:- Havells Cat.No.IHBC010004 including connection, testing etc. as required.

Supplying and fixing of 63A double pole On-load change over switch-AC23 (side handle) 240 Vac, 50 Hz Make :- Havells Cat No.IHBFDE0063(240 Vac) or equivalent in Legrand/L&T/Indoasian complete with all accessories etc as required.

Supplying and fixing of On-load change over switch 415 volts, four pole 100 Amps with S.S enclosure Make :- Havells Cat No. IHCNFE0100 or equivalent in Legrand/L&T/Indoasian complete with all accessories etc as required.