REPAIR AND MAINT OF CERTAIN STEEL AND WOODEN FURNITURE FOR OTHER STATION UNITS 955 WKSP MH AD STASTIC WKSP 2IC DET INT 903 APO DENTAL UNIT STN HQ DCS UNIT WITH MD ACCN BSO GEI GOS GMS

Amount

Charpoy GI pipe with ply top (Drg No FD-220) Removing of damaged UNSV Top plywood , S&F new 12mm thick commercial BWR plywood as per specification completed all as specified and directed.

Removing damaged /UNSV long rail, S&F new 32 mm dia commercial BWR dia GI long rail med grade ISI marked threading shall be made up to 22 mm at one end and 40mmon other end ccompleted all as specified and directed.

Removing of old damaged GI UNSV long rail & fabricated in short rail to charpoy GI pipe threading shall be made upto 22 mm at one end and 40 mm on other end completed all as specified and directed.

Removing old damaged GI UNSV short rail and fabricated in legs to charpoy GI pipe threading shall be made upto 40 mm completed all as specified and directed.

Removing of old damaged GI three way elbow 32mm dia S&F New GI three way Elbow 32mm dia ISI marked completed all as specified and directed.

Removing of old damaged GI 32 mm dia check nut, S&F GI 32 mm dia check nut 10mm thick completed all as specified and directed.

Removing of old damaged FI clamp from GI charpoy S&F new FI clamps of size 25x3mm welded to GI leg pipe completed all as specified and directed.

Desk for Senior/Junior students (Drg No FD-CEJZ/SKD/388/1&2) Removing of old damage screw, S&F machine screw 3/16 in thick 65 mm long for tighting the wooden planks with suitable washer as per drg completed all as specified and directed.

Removing of old damage screw, S&F PK screw 35 mm long for tighting the wooden planks with suitable washer as per drg completed all as specified and directed.

Removing old damaged/UNSV top of two seater desk, S&F new top of desk 20mm thick 1st class seasoned HW teak as per existing shape and size, all as per drg completed all as specified and directed.

Removing old damaged/UNSV bottom plank of two seater desk, S&F new bottom plank of desk 20mm thick 1st class seasoned HW teak as per existing shape and size, all as per drg completed all as specified and directed.

Removing old damaged/UNSV front plank of two seater desk, S&F new front plank of desk 20mm thick 1st class seasoned HW teak as per existing shape and size, all as per drg completed all as specified and directed.

Removing old damaged/UNSV left/right plank of two seater desk, S&F new left/right ply of desk 20mm thick 1st class seasoned HW teak as per existing shape and size, all as per drg completed all as specified and directed.

M&L for welding to damaged/decayed steel frame of two seater desk with arc welding as per std workmanship completed all as specified and directed.

All as per item No 14 above but rear rail.

All as per item No 14 above but side rail.

All as per item No 14 above but seat rail of two seater desk chair 25 thick.

All as per item No 14 above but back rest of two seater desk chair 20mm thick.

Removing of old damage hinges, S&F new hinges of size 50mm with screws as per drg completed all as specified and directed.

M&L for applying two coat of wood polish high glossy/french polish to exposed wood surface, filling the cracks with putty and glue as per drg completed all as specified and directed.

Locker Bed side steel (Drg No FD-257, 127) Removing old damaged base legs, S&F 1mm thick MS new base leg as per existing shape and size all as per drgcompleted all as specified and directed..

All as per item No 21 above but shelves

All as per item No 21 above but shutter

All as per item No 21 above but base/Top sheet

All as per item No 21 above but back sheet

All as per item No 21 above but Side sheet

Removing of old damaged CP handle and S&F new CP handle as per samplecompleted all as specified and directed.

Removing of old damaged Hasp and staples, S&F new Hasp and staples of Aluminium 100 mm as per sample completed all as specified and directed.

All as per item No 28 above but Bow handle

Removing of old damaged center partition sheet, S&F new centre partition as per sample completed all as specified and directed.

M&L for spray painting with synthetic enamel paint OG as per drg completed all as specified and directed.

Table 900 x 600 x 760 mm with drawer (Drg No FD-224, 283) Removing old damaged top,S & F new 18 mm thick pre-laminated praticale board Top as per existing shape and size,provided hard pvc toe to each leg ,all as per drg completed all as specified and directed.

Removing old damaged legs , S & F new legs as per existing shape and size, as per drg completed all as specified and directed.

All as per item No 33 above but long Rail.

All as per item No 33 above but short Rail.

All as per item No 33 above but side stiffner.

All as per item No 33 above but centre stiffner.

Removing old damaged Drawer , S & F new Drawer made of 12/6 mm thick BWR commercial plywood as per existing shape and size and replaced unsv knobs, as per drg completed all as specified and directed.

M/L for applying two coat of wood polish high glossy/ French polish all exposed wood surface as per drg completed all as specified and directed.

Almirah Steel Med/Small with shelves (Drg No FD-67 1032) Removing old worn out damaged base legs, S&F 1mm thick MS new legs as per existing shape and size as per drg completed all as specified and directed.

All as per item No 40 above but shelves

All as per item No 40 above but shutter

All as per item No 40 above but base/ top sheet

Removing of old damaged door lock, S&F new door lock as per sample completed all as specified and directed.

Removing of old damaged CP handle, S&F New CP handle as per sample completed all as specified and directed.

M&L for welding to damaged/ decayed steel frame with arc welding as per std workmanship completed all as specified and directed.

M&L for spray painting with synthetic enamel paint OG as per drg completed all as specified and directed.

Table 900x600x760mm with drawer steel (Drg No FD-1008) Removing old damaged top, S&F 18mm thick pre-laminated praticale board top as per existing shape and size all as per drg completed all as specified and directed.

All as per item No 48 above but long rail

All as per item No 48 above but side rail

All as per item No 48 above but Legs

All as per item No 48 above but Center stiffener

Removing old damaged drawers, S&F new drawers as per drg completed all as specified and directed.

Removing of old damaged drawer lock, S&F drawer lock as per sample completed all as specified and directed.

M&L for welding to damaged/ decayed steel frame of table with arch welding as per std workmanship completed all as specified and directed.

Removing UNSV plastic shoes from Leg, S&F new hard PVC shoes of best quality of each leg as per drg completed all as specified and directed.

M&L for spray painting of table with synthetic enamel OG paint as per drg completed all as specified and directed.

Chair CB Steel with Arms (Drg No FD-75) M&L for welding to damage/decayed steel frame of chair steel CB with Arms completed all as specified and directed.

S&F flat iron 20x3mm thick welded to steel frame to support of wooden seat to each chair completed all as specified and directed.

Removing the old and damage arm rest and S&F arm rest as per drg completed all as specified and directed.

Removing the old damage seat frame, S&F seat frame as per drg completed all as specified and directed.

All as per item No 43 above but back rest frame.

Removing UNSV plastic cane of Seat and back rest frame M&L for recanning to seat and back rest frame with 2mm wide half round plastic cane in Godrej pattern including polishing to wooden frame, as per drg completed all as specified and directed.

Removing the old UNSV top cap and PVC toes, S&F new PVC top cap and PVC toe to each chair as per drg completed all as specified and directed.

M&L for painting to steel frame with one coat of OG synthetic enamel paint as per drg completed all as specified and directed.

Chair CB Steel without Arms (Drg No FD-75) M&L for welding to damage/decayed steel frame of chair steel CB without Arms completed all as specified and directed.

S&F flat iron 20x3mm thick welded to steel frame to support of wooden seat to each chair completed all as specified and directed.

Removing the old damage seat frame, S&F new seat frame as per drg completed all as specified and directed.

All as per item No 68 above but back rest frame.

Removing UNSV plastic cane of Seat and back rest frame M&L for recanning to seat and back rest frame with 2mm wide half round plastic cane in Godrej pattern including polishing to wooden frame, as per drg completed all as specified and directed.

Removing the old UNSV top cap and PVC toes, S&F new PVC top cap and PVC toe to each chair as per drg completed all as specified and directed.

M&L for painting to steel frame with one coat of OG synthetic enamel paint as per drg completed all as specified and directed.

Chair CB Steel Spl with Arms (Drg No FD-120) Removing the old damage seat frame, S&F new seat frame as per drg completed all as specified and directed.

All as per item No 73 above but back rest frame.

Removing damaged/UNSV arm rest, S&F arm rest as per drg completed all as specified and directed.

Removing UNSV plastic cane of Seat and back rest frame M&L of recanning to seat and back rest frame with 2mm wide half round plastic cane in Godrej pattern including polishing to wooden frame, as per drg completed all as specified and directed.

Removing the old UNSV top cap and PVC shoes, S&F new PVC top cap and PVC shoes to each chair as per drg completed all as specified and directed.

M&L for welding to damage/decayed steel frame completed all as specified and directed.

M&L for painting to steel frame with OG one coat of synthetic enamel paint with as per drg completed all as specified and directed.

Chair Varandha (PVC) (FD-19, 359, FD/MAP-II/06) Removing UNSV seat & back plastic sheet, S&F new seat & back plastic sheet as per drg completed all as specified and directed.

M&L for welding to damage/decayed steel frame all as per drg completed all as specified and directed.

S&F 20mm steel conduit pipe nos 1 welded to steel frame to support chair completed all as specified and directed.

Removing unsv plastic shoes from chair, S&F new hard PVC shoes of best quality as per drg completed all as specified and directed.

M&L for painting steel surface with two coat of white synthetic enamel paint as per drg completed all as specified and directed.

Foam with back with cushion (FD-78(M)) Removing old damaged seat and back wooden plank with lether raxine and foam , S&F new back plank of 19 mm thick made of 1st Class season teak including lether rexin with 50mm synthetic foam 32 dencity make sleepwell/kurlon , as per exisiting shape and size completed all as specified and directed.

All as per item No 91 but rear legs

All as per item No 91 but long rails

All as per item No 91 but short rails

All as per item No 91 but front legs

M&L for welding to damaged/decayed steel frame with arc welding as per std workmanship completed all as specified and directed.

M&L for spray painting of table with synthetic enamel OG paint as per drg completed all as specified and directed.

Table 900 x 600 x 760 mm with drawer (Drg No FD-224, 283) Removing old damaged top,S & F new 18 mm thick pre-laminated praticale board Top as per existing shape and size,provided hard pvc toe to each leg ,all as per drgcompleted all as specified and directed.

Removing old damaged legs , S & F new 1mm thick squre tube legs as per existing shape and size, as per drg completed all as specified and directed.

All as per item No 92 above but long Rail.

All as per item No 92 above but short Rail.

All as per item No 92 above but side stiffner.

All as per item No 92 above but centre stiffner.

Removing old damaged Drawer , S & F new Drawer made of 12/6 mm thick BWR commercial plywood as per existing shape and size and replaced unsv knobs, as per drg completed all as specified and directed.

M/L for applying two coat of wood polish high glossy/ French polish all exposed wood surface as per drg completed all as specified and directed.

Table Centre (Drg No FD-235, 274) Removing old damaged top,S & F new Top of 18 mm thick pre-laminated praticale board, as per existing shape and size,provided hard pvc toe to each leg ,all as per drg completed all as specified and directed.

Removing old damaged legs , S & F new legs of 30 x 60 mm thick as per existing shape and size, as per drg completed all as specified and directed.

All as per item No 100 above but long Rail.

All as per item No 100 above but stort rail

All as per item No 100 above but stiffner.

M&L for applying two coat of wood polish high glossy/ French polish all exposed wood surface as per drg completed all as specified and directed.

Table Writing (Drg No FD-249, 268, 275) Removing old damaged top,S & F new Top of 18 mm thick pre-laminated praticle board, as per existing shape and size,provided hard pvc toe to each leg ,all as per drg completed all as specified and directed.

Removing old damaged legs , S & F new legs of 35 x 55 mm thick as per existing shape and size, as per drg completed all as specified and directed.

All as per item No 106 above but front/rear rail.

All as per item No 106 above but side rail

All as per item No 106 above but side stiffner.

All as per item No 106 above but shelves.

All as per item No 106 above but centre stiffner.

Removing old damaged Shutter , S & F new Shutter made of 19 mm thick MDF board, as per existing shape and size,replaced unsv knobs, all as per drg completed all as specified and directed. .

All as per item No 106 above but drawers.

Removing old damaged bottom ply of drawer , S & F new 6 mm thick bottom ply of drawer as per existing shape and size all as per drg completed all as specified and directed.

Removing old damaged back side ply of drawer , S & F new 12 mm thick back side ply of drawer as per existing shape and size all as per drg completed all as specified and directed.

Removing old damaged left/right side ply of drawer , S & F new 12 mm thick left/right side ply of drawer as per existing shape and size all as per drg completed all as specified and directed. .

M&L for applying two coat of wood polish high glossy/ French polish all exposed wood surface as per drg completed all as specified and directed.

Chair Dining (Drg No FD-228, 203, 279, FD/MAP-II/05) Removing of damaged front leg ,S&F new Front leg, as per existing shape and size completed all as specified and directed.

All as per item No 119 above but rear leg.

All as per item No 119 above but side rail (left/right).

All as per item No 119 above but front rail.

All as per item No 119 above but rear rail.

All as per item No 119 above but back rest.

All as per item No 119 above but stiffner.

Removing UNSV plastic cane, M&L for Recanning to Chair with 2mm wide half round plastic cane in Godrej pattern & PVC sheet, provided hard PVC toe to each leg as per drg completed all as specified and directed..

Removing UNSV PVC sheet and suporting of 2x stiffener of bottom of PVC sheet M&L for Chair PVC sheet, provided hard PVC toe to each leg as per drg completed all as specified and directed.

M/L for applying two coat of wood polish high glossy/ French polish all exposed wood surface as per drg completed all as specified and directed.

Chair Easy (Drg No FD-201, 229, 281) Removing of damaged front leg ,S&F new 25 x 55 mm thick Front leg made of 1st calss season teak, as per drg or as per existing shape and size completed all as specified and directed.

All as per item No 129 above but rear leg.

All as per item No 129 above but side seat rail.

All as per item No 129 above but back side rail.

All as per item No 129 above but front seat rail.

All as per item No 129 above but rear seat rail.

All as per item No 129 above but back upper/lower rail.

All as per item No 129 above but stiffner.

All as per item No 129 above but arm.

Removing UNSV plastic cane,M&L for Recaning to Chair with 2mm wide half round plastic cane in Godrej pattern, provided hard PVC toe to each leg as per drg completed all as specified and directed.

M/L for applying two coat of wood polish high glossy/ French polish all exposed wood surface as per drg completed all as specified and directed.

Chair Writing (Drg No FD-202,250, 271,280) Removing of old damaged front leg ,S&F new 30 x 55 mm thick Front leg made of 1st class season teak, as per drg or as per existing shape and size completed all as specified and directed.

All as per item No 140 above but rear leg .

All as per item No 140 above but back rest.

All as per item No 140 above but side rail .

All as per item No 140 above but front/back rail.

All as per item No 140 above but stiffner.

All as per item No 140 above but Hand rest.

Removing UNSV plastic cane,M&L for Recaning with 2mm wide half round plastic cane in Godrej pattern, provide hard PVC toe to each leg as per drg completed all as specified and directed.

M&L for applying two coat of wood polish high glossy/ French polish all exposed wood surface as per drg completed all as specified and directed.

Table dining 6/8 person (Drg No FD-239,269,273) Removing old damaged top,S & F new 18 mm thick pre-laminated praticale board Top as per existing shape and size,provided hard pvc toe to each leg ,all as per drg completed all as specified and directed.

Removing of old damage leg, S&F new 40 x 75 mm thick leg made of 1st class season teak, all as per drg or as per existing shape and size completed all as specified and directed.

All as per item No 149 above but long rail.

All as per item No 149 above but stiffner

All as per item No 149 above but short rail

M/L for applying two coat of wood polish high glossy/ French polish all exposed wood surface as per drg completed all as specified and directed.

Table Peg (Drg No FD-266,277) Removing old damaged top,S & F new 18 mm thick pre-laminated praticale board Top, as per existing shape and size,provided hard pvc toe to each leg ,all as per drg completed all as specified and directed.

Removing of old damage leg, S&F New 30 x 50 mm thick leg made of 1st class season teak, all as per drg completed all as specified and directed.

All as per item No 155 above but long rail.

All as per item No 155 above but short rail .

M&L for applying two coat of wood polish high glossy/ French polish all exposed wood surface as per drg completed all as specified and directed.

Teapoy (Drg No FD-232, 278, 34) Removing old damaged top, S & F new 18 mm thick pre-laminated praticle board Top as per existing shape and size,provided hard pvc toe to each leg ,all as per drg completed all as specified and directed.

Removing of old damage leg, S&F New 30 x 50 mm thick leg made of 1st class season teak, all as per drg completed all as specified and directed.

All as per item No 160 above but long rail.

All as per item No 160 above but short rail .

All as per item No 160 above but stiffner.

M&L for applying two coat of wood polish high glossy/ French polish all exposed wood surface as per drgcompleted all as specified and directed.

Table bed side (Drg No FD-248, MAP/E6/15) Removing of old damage Top of Table bed side S & F new 18 mm thick pre-laminated praticale board Top, as per drg or as per existing shape and size completed all as specified and directed.

Removing of old damage left/right side, S & F new 12 mm partical board with teak venreed OSD left/right side as per drg completed all as specified and directed.

Removing of old back side, S&F new 6 mm ply BWR quality to back side as per drg completed all as specified and directed.

Removing of old damage shelves and bottoms, S&F New 19 thick MDF board shelves as per drgcompleted all as specified and directed.

Removing old damage handle S&F New handle 100 mm long CP, all as specified shape, size, drg completed all as specified and directed.

M&L for applying two coat of wood polish high glossy/ French polish all exposed wood surface as per drg completed all as specified and directed.

Sofa Set 5 seaters with cushion (Drg No FD-281, FD/MAP/06) Removing of old damage seat and back cushion from Sofa Set 5 Seater , S & F New cushion of 100 mm thick 40 density make sleep well/Kurlon duly upholster with tepstry cloth not less than Rs. 250/- Per meter of best quality approved shade as per drg completed all as specified and directed.

Sofa set 3 seater with cushion (Drg No FD-281, FD/MAP/06) Removing of old damage tepstry cloth of seat and back cushion from Sofa Set 3 Seater S&F upholstery tepstry loth not less than Rs.250/- per meter of best quality and approved shade all as per drg completed all as specified and directed.

Removing of old damage seat/back ply, S & F new 12 mm thick commercial BWR quality, seat ply as per drg completed all as specified and directed.

Removing of old damage arm, S&F new 35 x 75 mm thick arm made of 1st class season teak all as per drg completed all as specified and directed.

Removing of old damage long rail, S&F new 35 x 100 mm thick long rail made of 1st class season teak, all as per drg completed all as specified and directed.

Removing of old damage short rail, S&F new 30 x 100 mm thick short rail made of 1st class season teak, all as per drg and directed by Engr - in- Charges..

Removing of old damage stiffner, S&F new 35 x35 mm thick stiffter made of 1st class season teak, all as per drg and directed by Engr - in- Charges..

Removing of old damage rear leg, S&F new 35 x 75 mm thick rear leg made of 1st class season teak as per drg or as directed by Engr - in- Charges.

Removing of old damage front leg, S&F new 35 x 75 mm thick front leg made of 1st class season teak all as per drg completed all as specified and directed.

Removing of old damage back seat long rail, S&F new 35 x 100 mm thick back seat long rail made of 1st class season teak, all as per drg completed all as specified and directed.

Removing of old damage back seat short rail, S&F new 30 x 100 mm thick back seat short rail made of 1st class season teak, all as per drg completed all as specified and directed.

M&L for applying two coat of wood polish high glossy/ French polish all exposed wood surface as per drg completed all as specified and directed.

Table Dressing Gents with Mirror (Drg No FD-230,379) Removing of old damage mirror S&F new mirror of 5 to 5.5mm thick mirror as per drg completed all as specified and directed.

Removing of old damage drawers, S&F new drawers of 12/6 mm thick commercial BWR quality ply with knobs as per drg completed all as specified and directed.

Removing of old damage Top S&F Nes Top of 12 mm thick pre-laminated particale board,as per drg completed all as specified and directed.

Removing of old damage left/right side S&F new left/right side of 12 thick pre-laminated particale board, as per drg completed all as specified and directed.

Removing of old damage back side Ply,S&F new back side Ply as per drg completed all as specified and directed.

Removing of old damage bottom ply, S&F new bottom of 6 mm thick commercial BWR quality ply as per drg completed all as specified and directed.

Removing of old damage back side 6mm ply of mirror, S&F new back side 6mm ply for mirror as per drg completed all as specified and directed.

Removing of old damage long rail of mirror frame including beading , S&F new 25 x 35 mm thick long rail of mirror frame including fitting as per drg completed all as specified and directed.

Removing of old damage short rail of mirror frame including beading , S&F new 25 x 35 mm thick short rail of mirror frame including fitting as per drg completed all as specified and directed.

M&L for applying two coat of wood polish high glossy/ French polish all exposed wood surface as per drg completed all as specified and directed.

Bed Ply Wood Top (Drg No FD-213, 246) Removing of old damage long rail, S&F New long rail of II nd cl HW Sal wood as per drg completed all as specified and directed.

All as per item No 194 above but stiffner

All as per item No 194 above but short rail

Removing of old damage leg, S&F new leg of 60 x 60 at top & 30 x30 at bottom as per drg completed all as specified and directed.

Removing of old damage head rest, S&F head rest as per drg completed all as specified and directed.

All as per item No 198 above but foot rest.

Removing of old damage 12mm BWR ply wood, S&F 12mm BWR ply wood ISI marked as per drg completed all as specified and directed.

M&L for applying two coat of wood polish high glossy/ French polish all exposed wood surface as per drg completed all as specified and directed.

Notice board 6'x4' (Drg No FD-1042) Removiing old damage unsv green baize cloth, S&F New green baize cloth of best quality with allround beadings of 1st class HW as per drg completed all as specified and directed.

Removing old damage unsv frame S&F new frame of particle board/MDF board 18 mm thick of as per existing shape and size, as per drg completed all as specified and directed.

All as per item No 202 above but sliding glass 4mm thick.

Removing old damage Soft board S& F New soft board as per exsisitng shape and size all as specified completed all as specified and directed.

M&L for applying high glossy/ French polish all exposed wood surface as per drg completed all as specified and directed.

Chair Revolving/computer steel (FD/E6/MAP )Removing of damage UNSV seat cushion, S&F new seat cushion of 75mm thick 32 density duly upholstery completed all as specified and directed.

Removing of damage old UNSV back cushion rest, S&F new back cushion rest of 75mm thick 32 density duly upholstery complete all as per specification completed all as specified and directed.

Removing of damage UNSV Hydrolic spring, S&F new Hydrolic spring to chair revolving complete all as per specification completed all as specified and directed.

Removing of damage UNSV arm rest, S&F new arm rest as per existing shape and size all as per drg completed all as specified and directed.

Removing of damage UNSV Base frame, S&F new Base frame iron/PVC to chair revolving complete all as per specificationcompleted all as specified and directed.

Removing of damage UNSV wheel, S&F new wheel to chair revolving complete all as per specification completed all as specified and directed.

M&L for spray painting with synthetic enamel black paint as per drg completed all as specified and directed.

Sofa set single seaters with cushion (Drg No FD-281, FD/MAP/06) Removing of old damage seat and back cushion from sofa single seater, S&F new cushion of 100mm thick 40 density make sleep well/kurlon duly upholster with tepstry cloth not less than Rs.250/- per meter of best quality and approved shade all as per drg completed all as specified and directed.

Removing of old damage seat/back ply, S & F new seat ply of 12 mm thick BWR qualtiy as per drg completed all as specified and directed.

Removing of old damage arm, S&F new arm of 1st calss season teak all as per drg completed all as specified and directed.

Removing of old damage front leg, S&F new front legof 1st class season teak all as per drg completed all as specified and directed.

Removing of old damage rear leg, S&F new rear leg of 1st class seaso teak as per drg completed all as specified and directed.

M&L for applying two coat of wood polish high glossy/ French polish all exposed wood surface as per drg completed all as specified and directed.

Chair writing Officer steel (FD/E6/MAP/12) Removing of damage UNSV seat cushion, S&F new seat cushion of 75mm thick 32 density duly upholstery complete all as per specification completed all as specified and directed.

Removing of damage UNSV back cushion rest, S&F new back rest cushion of 75 mm thick 32 density duly upholstery completed all as specified and directed.

M&L for welding to damaged/decayed steel frame with arc welding as per std workmanship completed all as specified and directed.

Removing of damaged/UNSV arm rest, S&F new arm rest as per existing shape and size all as per drg completed all as specified and directed.

S&F flat iron 20x3mm thick welded to steel frame to support chair completed all as specified and directed.

Removing UNSV plastic shoes from chair, S&F new plastic shoes of best quality as per drg completed all as specified and directed.

M&L for spray painting with of synthetic enamel paint black as per drg completed all as specified and directed.

Side Board (Drg No FD-241, 371) Removing of old damage Top Board S&F new Top Board as per drg completed all as specified and directed.

Removing of old damage left/right side board S&F New 18 mm thick pre-laminated praticle board left/right side board as per drg completed all as specified and directed.

Removing of old back side ply , S&F new 6 mm thick back side BWR quality ply as per drg completed all as specified and directed.

Removing old damaged Shutter , S & F new 19 mm thick pre-laminated particle board Shutter as per existing shape and size,replaced unsv knobs,handle and hinges, all as per drg completed all as specified and directed. .

Removing of old damage drawers, S&F new 12 mm thick drawers of BWR quality ply with knobs as per drg completed all as specified and directed.

S&F 18mm thick teak veneered parctical board of exterior grade-1 OSD to drawer front side as per specified completed all as specified and directed.

Removing of old damage shelves, S&F new 19 mm thick commercial BWR ply shelves as per drg completed all as specified and directed.

Removing old damage handle S&F New handle 100 mm long CP, all as specified shape, size, drg completed all as specified and directed.

M&L for applying two coat of wood polish high glossy/ French polish all exposed wood surface as per drg completed all as specified and directed.

Chair Dining Officer. (Drg No FD-MAP/02, FD-E6/MAP/10R) Removing old damged seat cushion from chair, S&F New seat cushion of 75 mm thick 40 mm dinesity Sleep Well/Kurlone duly upholes by with tepestory cloth not less than Rs 250/- per mtr of approved all as specified as per drgcompleted all as specified and directed.

Removing of old damaged seat ply S&F New seat ply 6 mm thick BWR quality as per existing shape and size or drg completed all as specified and directed.

Removing of damaged front leg ,S&F Front leg of 2nd class HW sal wood, as per drg completed all as specified and directed.

All as per item No 238 above but rear leg.

All as per item No 238 above but side rail.

All as per item No 238 above but front rail.

All as per item No 238 above but rear rail.

All as per item No 238 above but back rest.

All as per item No 238 above but stiffner.

M&L for applying two coat of wood polish high glossy/ French polish all exposed wood surface as per drg completed all as specified and directed.

PRADIPTA KUMAR PANI