PROVISION OF TROLLEY MOUNTED DG SET (TECH/DOMESTIC AREA) OF CAPACITY 160 KVA AT AF STN HASIMARA UNDER GE (AF) HASIMARA

Amount

Supply, installation, commissioning and testing of Silent diesel engine driven generating set 415 Volts, 3 Phase 4 wire, engine as per IS 10001/10002, ISO-3046, BS-5514, DIN-6271 of capacity 160 KVA, 4 stoke, desgined to run continuously at 1500 RPM complete with the following accessories :- (a) Diesel Engine (b) Alternator (c) Acoustic Enclouser (d) Control Panel cum AMF Panel (e) Accessories (f) Spare parts & tools Note :- (i) DG Set shall be tested as type test routine as per IS in presence of rep of Accepting Officer. (ii) Contractor shall submit QAP (Quality assurance programme) after the 15 days from placement of order for DG set testing to factory. DG set shall be dispatched after inspection clearance by inspecting officer. (iii) The contractor shall get approval of GE for the make of DG Set as per CA specification, they plan to procure. (iv) Prior manufacturing the general arrangment drawing design details of the DG Set and AMF Panel shall be got approved by GE complete all as specified and as directed. For complete details and specifications of DG Set please refer Sl No. a to f clause No. 21,21.1 & 21.2 of Particular specifications.

Material and labour for trolley for DG Set with AMF Panel of size minimum 5.0 x 2.5 Mtr made out of mild steel angle/ chanels medium weight beams & MS flates with necessary welding in any postion driliing in hot/cold etc for longitude and cross members of trolly made out of ISMC chanel 100 and top of the members covered with 6 mm thick MS plate platform and vertical support over the platform with MS equal angle of size 50 x 50 x 6 mm thick angles with MS flat 50 x 5 mm thick for two runs of bracing the supports, V type towing frame with hook with spring and check nuts and mounting bracket with bush for movement of tow assembly. The assembly made out of ISMC chanel 100 with long and cross member, turning plate assembly for front wheel only fitted in front axle, the front and rear axle made out of medium weight beam ISMB 100 including tyre with tube F78-15 8 ply rataing six Nos. with wheel drum (Four Back side and two front side), mounting bracket, bearings, check nuts, locknuts, towing clamp, key etc welded with medium beam with nuts and bolts, washers as required for mounting the DG Set, complete including provision of one No cable drum of suitable size for 100 m cable in a drum rotating type, complete all as specified and directed.

Supply, installation, commissioning and testing of portable earthing system comprising of 3 Nos Spike of copper solid rod 25mm dia of length 1.5 mtr with top terminal and fastener terminal for cable on top including copper cable multistranded 6 sqmm 10 m length, complete all as specified and directed.

Materials and labour PVC insulated and FR PVC Round Sheathed, Copper Conductor (flexible) industrial cable, 1100 Volts, conforming to IS 694, Un-armoured heavy duty electric cable cross- sectional area 50 sqmm 4 core, complete all as specified and as directed.

MAJUMDER ENTERPRISE

M/S. JAGDISH PRASAD AGARWALA

SHRI PARTHA DUTTA

M/S. NARENDRA KUMAR GARG

M/S SARKAR ELECTRIC

M/S ANIL KUMAR BAUL

M/S ASHOK ENTERPRISE