SPECIAL REPAIR TO JCO ORS TOILET BLOCK IN BLDG NO P-79 AT HQCC AND OTHER SANCTIONED WORK IN AREA OF AGE BR-I UNDER GE (EAST) LUCKNOW.

Amount

Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for Non Skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceedubg 0.18 Sqm but not exceedubg 0.38 Sqm , in floors etc set in on 15 mm thick in net cement screed (1:4) slurry and pointed incl white or colour cement to match complete all as specified and directed.

M&L for glazed ceramic colour tiles of size 7-8mm thick (square/rectangular) area/size of each tile 300x600mm set and joints in net cement slurry and pointed incl white or colour cement to match the colour or tiles as in Skirting/dados over 10mm thick screed in cm (1:4) complete all as specified and directed.

Taking up or down steel tubing & connection 15mm bore complete all as specified and directed.

Taking up or down steel tubing & connection 20mm bore complete all as specified and directed.

S&F for GI tubing medium gde 15mm dia galvanised with all fitting and fixed to walls and ceilings or laid in floors complete all as specified and directed.

S&F 20 mm bore galvanized steel tubes, medium grade for water supply pipes etc, fixed to walls and ceiling or laid in floors complete all as specified and directed.

Cutting chases for concealed water tubing and making good to disturbed surfaces in CM (1:4) cutting not exc 10cm in girth complete all as specified and directed.

M&L for cutting channels, grooves or rebates not exc 15cm girth, and trimming surface of concrete/brick with or without reinfocement complete all as specified and directed.

M&L for complete removal of existing treatment from old plastered surfaces of wall and applying two coats of oil bound distemper over a coat of birla wall care putty and primer, complete all as specified and directed.

M&L CI floor trap 75mm with grating incl jointing to waste pipe fixed in cement concrete type B1 1:2:4 complete all as specified and directed.

S&F in repair CPVC floor trap with grating including jointing to waste pipe in run lead 75/100mm outlet complete all as specified and directed.

Taking down rain water pipes ( any size or pattern) incl all fittings, shoes, bends, swan neck etc. and removal to store complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipe single socketed in any length with rubber rings joints laid in trenches or in floor/wall complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipe single socketed in any length with rubber rings joints laid in trenches or wall complete all as specified and directed.

S&F PVC (SWR) bends any radius of 75 mm dia complete all as specified and directed.

S&F 110mm bore PVC (SWR) bends, any radius complete all as specified and directed.

S&F 75mm PVC (SWR) vent cowl complete all as specified and directed.

S&F 75mm stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stay to wall or roof complete all as specified and directed.

S&F vitreous china coloured half/full stall type urinal incl CP brass urinal spreaded, CP brass waste coupling /CP brass bottle trap 40 mm dia waste pipe,grating brackets fixed complete all as specified and directed.

S&F wash hand basin pedestal type white vitrous China size 630 x 450 mm, including brackets (flat back or angle back), incl cutting & pinning in ends of brackets or errecting stand incl piller tap, waste pipe coupling PVC connection complete all as specified and directed.

S&F vitreous china wash basin white flat back of size 550 x 400 mm including PVC waste pipe and waste coupling complete all as specified and directed.

S&F vitreous china wash down water closet pan (Pedestal pattern), white, including connection to drain (or outgoing pipe) and to flushing pipe, anti-sypohonage pipe etc., with plastic WC seat cover (white) closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hinging device, complete all as specified and directed.

S&F in repair vitreous china squatting pan Orissa pattern, size 580x440 mm, white with `P' or `S' trap including necessary connection to flushing cistern, flush pipe and outgoing pipes and making good to floor complete all as specified and directed.

S&F in repairs PVC valveless symphonic action type low level flushing cistern (ISI marked) of 10 litre capacity including 32 mm dia PVC flush pipe connected to water closet with inlet, ball valve, float and handle complete all as specified and directed.

S&F chromoium plated box type toilet paper holder fancy complete all as specified and directed.

S&F soap dish of fancy type complete all as specified and directed.

S&F glass self assembly consisting of 5.5 mm thick glass sheet glass self 12 cm wide with CP bracket gaurd and railing 60 cm long complete all as specified and directed.

S&F in repair glass corner shelves fancy type 6mm thick 250x250mm size and fixed over CP brass bracket fixed complete all as specified and directed.

S&F brass CP tubular towel rail of superior quality 20mm dia 60cm long between flanges fancy type complete all as specified and directed.

S&F in repair towel ring 200mm dia superior quality fixed as complete all as specified and directed.

S&F PVC connection of 15mm bore,600mm long with brass coupling on both ends of superior quality complete all as specified and directed.

S&F in repair CP angle valve for 15 mm bore pipe with capstan head long screwed shank including cp cover plate fancy type complete all as specified and directed.

S&F 15mm bore gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed of complete all as specified and directed.

S&F 25mm bore dia gun metal ,globe or gate valve ,with iron wheel head ,screwed both ends for iron pipe and fixed complete all as specified and directed.

M&L for brick work with fly ash bricks straight or curved on plan exc 6.0 mtr mean radius in CM 1:4 complete all as specified and directed.

M&L for brick work with fly ash bricks straight or curved on plan exc 6.0 mtr mean radius in CM 1:6 complete all as specified and directed.

M&L for 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window, cills cooking platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust and admixtures of pigment to match with shade of granite complete all as specified and directed.

S&F 25 mm granite stone incl rubbing,polishing and necessary moulding all as directed for fixing in cooking platform, steps,jambs,piller, window-cills, urinal partition and like in cement mortar (1:4) on on screed beding 15mm including pointing in white cement (1:2) unsing marble duse with admixture of pigmemnt to matchy with shade of granite complete all as specified and directed.

S&F chromium plated bib tap with capstan head long body fancy type screwed for 15mm dia bore iron pipe complete all as specified and directed.

Dismantling water tanks of capacity exc 500 & not exc. 1000 ltr complete all as specified and directed.

S&F for rotational moulded polyethylene capacity 1000 ltrs water storage tank cylindrical hoisted & fixed in position complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks (cylinderical vertical with closed top) hoisted and fixed in position of 500 ltrs capacity, complete all as specified and as directed

S&F ball brass valve high pressure with polythene float and fly not complete screwed for iron pipe 20mm bore complete all as specified and directed.

S&F 15mm dia CP two way tap consisting angle valve to control water suitable for jet cleaner complete all as specified and directed.

S&F health faucet for EWC CP hand hold with flexible tube bracket etc complete set of superior quality complete all as specified and directed.

Taking down chowkhat with shutter (without taking off shutter from the frame) and area n'exc 1.5 sqm each complete all as specified and directed.

Taking down chowkhat with shutter (without taking off shutter from the frame) and area exc 1.5 sqm but not exc. 4 sqm each complete all as specified and directed.

S&F solid PVC door frame of size 50mmx47mm thick made out of 5mm thick plain colour PVC sheet reinforced with M.S Sqare tube, single side prelam PVC sheet used instead of plain colour PVC sheet edges will be painted to match with prelam sheet complete all as specified and directed.

S & F Factory made solid PVC door frame (single rebated)of size 60 x 30 mm made out of solid pvc foam with homogenious fine cellular structure havingsmooth outer integral skin with suitable metal stiffner and fixed with 100x8 sheet metal CSK screws complete all as specified and directed as shown on drawing (note:Door frame shall be water proof ,termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life)

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top and bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail, and bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles beading, and joined to gether with solvent cement, suppling and fixing in the frame at site complete all as specified and directed.

S&F 150 mm size aluminium alloy handles, febricated type extruded section, ISI marked complete all as specified and directed.

S&F 125 mm size aluminium alloy handles, febricated type extruded section, ISI marked complete all as specified and directed.

S&F butt hinges 100 mm mild steel hinges medium weight and fixed. ISI Marked complete all as specified and directed.

S&F 100mm long medium weight, cold rolled mild steel butt hinges all as specified and directed

Demolition of brick or stone/boulder masonry built in cement mortar complete all as specified and directed.

Excavation in post holes (or similar holes) each not exc. 0.50cum, getting out, returning, filling, in and ramming earth or broken rubble mixed with earth arouond in layers not exc. 25cm, watering and removing surplus soil to distance n exc 50 m and making good surface in soft/loose soil.

M&L for PCC1:3:6 type C-2 (40mm graded aggregate)as in posts etc complete all as specified and directed.

S&F mild steel section such as tubular trusses including special shaped washer etc. compete using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade ST-240 complete all as specified and directed.

S&F of MS plate as rest plate of truss forming hole for anchor bolt without any arrangement complete all as specified and directed.

M&L for preparation of previously untreated surfaces steel of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F coloured pre-painted GALVALUME aluminium zinc coating GI based corrugated steel sheet 0.50mm thick having tensile strngth of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws including necessary washers etc complete all as specified and directed.

M&L,Pre-painted GALVALUME aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in ridge fixed with self tapping screws/RCC nails up to height of 7.0 m for rain water shelter purpose,complete all as specified and directed.

M&L for cutting holes into reinforced concrete slab area exc. 100 sqcm but not exc. 250 sqcm complete all as directed.

M&L for providing cement concrete PCC 1:2:4 type B1 using 20mm graded aggregate in roof kerbs or chamfered on edges complete all as specified and directed.

M&L for reinforced cement concrete (1:2:4,type B-1) for chhaja up to height of 7.00 M , in repair incl application of cement slurry,binding of existing reinforcement in actual posn and formwork to side/soffits ,complete all as specified and directed.

M&L, precast RCC (1:2:4) type B-1 using 20 mm graded stone aggregate as in cover slab of manholes, set in CM (1:4) complete all as specified and directed.

M&L for UPVC undergound drainage pipe (UDS) type 'B' 160mm with wall thickness 4mm (min) and pressure 4 KN/m2 jointed in cement solvent complete including testing and concrete bed to drain pipe including packing under haunching against the sides of pipe after they are laid and tested in PCC 1:3:6 type C2 complete all as specified and directed. Make- Jain pipes/Finolex/Ajay flowguard/Armstrong/prince.

Excavation in trenches not exc. 1.5 m wide & not exc. 1.5 m deep in foundation and getting out in hard/dense soil complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 using 40mm graded brick aggregate as in foundation filling & mass concrete complete all as specified and directed.

M&L PCC 1:2:4 type B1 using 20mm graded stone aggr as in coping benching concrete padding on roof etc. finished fair and even including necessary form work if any complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and as directed

Removing excavated material to distance exc. 250 and not exc 500m complete all as specified and directed.

Surface excavation not exc 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil at road side berm complete all as specified and directed.

M&L forming embankments including raising (or lowering ) earth spreading in layers not exc 30cm thick, watering, ramming /rolling and finishing to required size, shape etc not exc 1.5 mtr high from base with soil complete all as specified and directed.

Extra moorum / red bajri filling kin floors or paving, laid in layers not exc 15cm thick spread, levelled and rammed including watering complete all as specified and directed.

M&L for RCC drain hume pipe 450mm dia NP3 complete all as specified and directed

S&F in repair exterior tiles superior quality 25 mm thick of approved size/design/shade set & jointed in neat cement slurry & pointed in white or coloured cement to match as in floor including 20mm thick screed bed in CM 1:4 complete all as specified and directed.

S&F polished vitrified ceramic tile light shade 10mm thick area of each tile not exc .36 sqm each tile set & jointed in neat cement slurry & pointed in white or coloured cement to match as in floor including 15mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L for rendering 10mm thick CM(1:3) on fair faces of brickwork or concrete surfaces of chhaja,complete all as specified and directed

M&L rendering 15mm thick in CM 1:6 on fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L 15mm thick rendering in cm 1:4 on fair surfaces of walls finished even and smooth w/o using extra cement complete all as specified and directed.

M&L for rendering 10mm thick on fair faces of concrete surfaces in cement mortar 1:4, mixed with liquid water proofing compound @ 200 ml per bag of cement finished even and smooth without using extra cement complete all as specified and directed. (Liquid water proofing compound to be measured paid separately)

Supply only Liquid water proofing compound (WPC) complete all as spesified and directed.

M & L for TMT bars 10mm dia and over cut to length bent to shape required incl, cranking, bending spirally for hooping ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips conforming to IS:1786 complete all as specified and as directed

M & L for TMT bars 5mm dia and over upto and incld 10mm dia as in stirrups, spacers and binders and binding with MS wire not less than 0.9mm dia (annealed) conforming to IS:1786, complete all as specified and as directed.

S&F for framed work as in doors or gates of angles or other section with gusset plates, rails, braces etccomplete drilled for fixing of steel sheeting or other coverings, doors etc should be prepared for hanging or sliding with and including either hooks or hinges or steel hanging door fitting (exclusive of steel hanging door fitting and other coverings, running rails and guides and hanging also fastening and fixing complete quality conforming to Fe-410W ( Gde E-250) quality B complete all as specified and directed.

M&L for two coats of cement based paint on plastered surfaces of walls including preparation of surfaces complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, platform, aprons etc., laid, bedded and pointed, in any mortar complete all as specified and directed.

M & L hard core of broken stone or boulders gauge not exc 63 mm deposited spread leveled in layer not exc 15mm thick watered and rammed to a true surface complete all as specified and directed.

M&L for 100 mm thick PCC type D2 1:4:8 (40 mm graded stone aggr) in sub base, floor complete all as specified and directed.

M&L brick work with fly ash bricks bricks straight or curved on plan to any radius in half brick thick wall work built in CM (1:4 ) complete all as specified and directed.

S&F of 80 mm thick M-40 grade ISI Marked, Machine pressed, precast concrete rubber moulded interlocking coloured paver block of any shape and size over including 25 mm thick sand cushion complete all as specifed and as directed.

Removal of excavated material exc 250mtrs but not exc 500m and depositing where directed at level not exc 1.5 m above starting point complete all as specified and directed.

M&L providing precast cement concrete 1:2:4 type B0 (12.5mm graded aggregate) set in cement mortar 1:6 louvers and jallies, 25mm thick (measured solid) including all mouldings but excluding frame (Pre-cast frame shall be measured separately) complete all as specified and directed.

M&L for providing pre-cast cement concrete 1:2:4 type B1 (20mm graded aggregates) set in cement mortar 1:6 in window or door cills, lintels pressumers, steps, quion blocks (for use with masonry) string courses, coping, knellers, apex stones, pier caps, columns, posts boundary pillers, bed plates, pintle blocks, ancho- rage blocks, bonders (for stone walling) corbels, brackets, etc.(of any section indicated) with plain fair faces including chamfers, weatherings, throating etc. and setting in mortar complete with joints to match complete all as specified and directed..

M&L for PCC 1:3:6 type C2 using 40 mm graded stone aggregate as in surface channel, subbase and drains complete all as specified and directed.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and directed.

M&L RCC (Nominal mix) type B1, 1:2:4 using 20mm graded stone aggr as in column,plinth beams, cantilevers, lintel beam ,slab over 1.5 m span complete all as specified and as directed

Fair finished flat formwork to sides and soffits of floors or roof & roof beams, lintels cantilevers, shelves including supports etc complete all as specified and as directed

M&L for preparation of new surfaces of wall and applying two coats of cement based paint over a coat of chalk whiting primer coat white or tinted complete all as specified and directed.

M&L for three coats of white wash including preparation of surfaces on wall complete all as specified and as directed

M & L 100 mm thick cement concrete type C2, 1:3:6 (using 40mm graded stone aggr) as in sub base of flooring/ hardstanding complete all as specified and directed.

M & L for 75 mm thick cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate as in floor/ sub base/ plinth protection complete all as specified and as directed.

M & L for 25 mm thick cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in subbase/ floor complete all as specified and as directed.

S&F 125mm long aluminium handles, cast type anodized complete all as specified and directed.

S & F 150mm long aluminium anodized, barrel tower bolts of extruded sectioncomplete all as specified and directed.

S&F PTMT grating doom 125mm dia complete all as specified and directed.

S&F vitreous china urinal ,half stall type ,white ( excluding flushing cistern ,Flush pipe and waste pipe) complete all as specified and directed.

S&F bib taps fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

S&F fancy type pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed

S&F brass chromium plated angle stop valve 15mm bore complete all as specified and directed.

M&L for cutting channels, grooves or rebates not exc 15cm girth, and trimming surface of concrete/brick with or without reinfocement complete all as specified and directed.

S&F steel work in tubular/Square trusses/similar framed work for chhajja up to height of 7.0 m including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade St.-240 incl one shop coat of zinc chromate primer paint (including preparation of surface) at Contractor’s workshop before fabrication ,complete all as specified and directed.

M&L applying two coats of synthetic enamel over 10cm in width or girth, not otherwise described paint over already treated surface of steel ,complete all as specified and directed.

M&L preparation of new steel surface of any description not otherwise described over 10 cm width or girth and apply two coat synthetic enamel paint over one coat red oxide complete all as specified and directed.

M&L for providing, PCC(1:2:4,type B-1) in roof kerbs,bencing,coping, rounded or chamfered on edges,complete all as specified and directed.

Cutting holes in brick walls in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4,Type B-1 as required complete all as specified and directed.

S&F stainless steel/CP Brass tube (50mm dia, height maximum 900mm) with two Nos chain (6mm dia) complete all as specified and directed.

Cleaning/removing of vegetation from roof top, chajjas and canopies etc. complete all as specified and directed.

Dismantling bricks (laid flat or on edge ) or brick tiles in floors, channels, kerbs, aprons etc. (each layer) laid dry or laid dry and pointed complete all as specified and directed.

Demolition mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) including washing down etc complete all as specified and directed.

M&L roof treatment with polymeric membrance for non approachable roof as under:- (a) M&L for screed bed 15mm thick in CM 1:4 using 100% course sand on roof incl WPC 3% by weight of cement. (b) Applying one coat of bituminous primer @ 0.5 ltrs/Sqm over prepared surface. (c) Applying one ocat of hot blown bitumen grade 85/25 @ 1.2 Kg/Sqm. (d) Supply and lying plymeric water proofing membrane weight not less than 3 Kg/Sqm and minimum 3mm thick laid on primed surface by sealed and bonded to the surface by torch application method. (e) Applying bitumen based aluminium paint two coats over membrane

All as per item No 124 above but on vertical surface such as parapets independent.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.complete all as specified and directed.

M&L for one light/fan/exhaust fan point wiring controlled by one switch with PVC insulated unsheathed multi stranded copper conductor (FRLS) of size 1.5 Sqmm (for Phase colour code Red and for Neutral colour code Black) and one run of size 1.5 Sqmm PVC insulated unsheathed multi stranded copper conductor (FRLS) (as earth wire, colour code green) and connected to common earth dolly all as specified. , drawn through in and including concealed PVC Conduit medium grade, ISI marked not less than 19.5 mm / 20 mm dia along with conduit fixing accessories and with pressed steel terminal box for mounting of modular inner plates of thickness 1.6 mm with outer modular plates upto 12 modules for provision of modular switches/regulators complete all as specified and directed. NOTE:- After rewiring cutting chasing portion should be matched with existing finishes of walls.

All as per item No 127 above but 5 Amp socket outlet, independent.

All as per item No 127 above but on the same board.

All as per item No 127 above but 2.5 sq mm wire for one 15 Amps socket outlet independent with continuous PVC insulated single core green colour copper earth wire of size 1.5 sq mm connected to common earth dolly.

Supply and fixing for modular switch 1 way 6 amps 230 volts single pole one way complete all as specified and directed.

Supply and fixing for socket outlet multipurpose 2-in-1, 5 pin 6 Amps, 230 Volts modular type complete all as specified and as directed.

Supply and fixing for socket outlet multipurpose 2-in-1, 6 pin 6 /16 Amps, 230 Volts modular type complete all as specified and as directed.

Supply and fixing for modular switch 1 way 16 amps 230 volts single pole one way complete all as specified and directed.

Supply and fixing in repairs modular metal flush box, including inner plate & white cover plate with frame, 2 modules complete all as specified and directed.

Supply and fixing in repairs modular metal flush box, including inner plate & white cover plate with frame, 3 modules complete all as specified and directed.

Supply and fixing in repairs modular metal flush box, including inner plate & white cover plate with frame, 4 modules complete all as specified and directed.

S&F ceiling rose, 3 phase/PVC/polycarbonate, isolated body three terminals complete all as specified and directed.

S&F lamp holder bakelite with back plate suitable for batten fittings complete all as specified and directed.

S&F decorative LED lighting fixture with extruded Al. heat sink, environmental friendly, energy efficient ready to use suitable for 4’ LED tube. Make: Havells Cat No REGALBATTENT8UPTO1X22WSSBSWH or equivalent in CG Cat No-DMLN1LT8-16/Philips Cat No-BN021C LED20S PSU NW GR .

S&F LED T8 IP 20 linear tubular lamp 22 watt(4') single end with PC body and PC diffuser complete with inbuilt driver. Make: Havells Cat No-CRYSTAL1213T8DSTL;20WLED865SGLASS or equivalent in CG Cat No-LTT8-20/Philips cat No-915004565402.

S&F for sub main wiring with PVC insulated unsheathed cable with copper conductor multi strand 2 single core 4 sq mm and one run of 4.0 sq mm PVC insulated green colour earth continuity wire drawn through in and including 25 mm dia PVC concealed conduit complete all as specified and directed.

S&F as in repair MCB DB SPN (double door) 8 Ways including bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall complete all as specified and directed.

S&F in repair MCB SPN, 40 to 63 Amps, 240 Volts , breaking capacity 10KA complete all as specified and directed.

S&F in replacement MCB, single pole, 240 Volts, of capacity (6-32 Amps) as ordered breaking capacity 10 KA complete all as specified and directed.

S&F exhaust fan metallic body AC single phase 230 /240 volts of size 300 mm sweep with making a hole and electrical connection complete all as specified and directed.

S&F in repairs LED street light pressure die cast aluminium housing suitable for 70W IP 66 protection including MS clamps made of 25x3 mm flat iron with bracket of GI pipe light grade 25 mm dia and length not less than 1.2 mtr end of GI pipe complete all as specified and directed. Make : Philips Cat No-BRP409 LED CW 035 NR FG S1 PSU GR or equivalent in CG Cat No-LSTP-72-CDL/Havells Cat No-ENDURAPEALPLUSSL70WLED757SASYTOPC

S&F 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspen- ded by insulating hangers not more than 1 metre apart including4mm suspension wire, one twin core cable of size 10sqmm flat or circular in a conduit pipe of 20 mm size complete all as specified and directed.

M/s Sudhir Enterprises

M/s Reliable Electromech Systems

QUALITY CONSTRUCTIONS CO

R P construction company