Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | H8₹44.4 L−₹11.8 L (21.0%)Accepted-AOC PANAGARH BAZAR RONDIHA MORE GT ROAD DIST PASCHIM BURDWAN PIN 713 148 WB | PANAGARH | PASCHIM BURDWAN | WEST BENGAL | 713148 | H8 | Accepted-AOC Contract awarded to M/s Raj Kumar Chopra being lowest bidder | |
| 2 | H1₹56.2 LRejected-Finance | H1 | Rejected-Finance HIGHER RATE QUOTED THAN L1 | |
| 3 | H2₹49.6 L−₹6.6 L (11.8%)Rejected-Finance | H2 | Rejected-Finance HIGHER RATE QUOTED THAN L1 | |
| 4 | H3₹49.0 L−₹7.2 L (12.8%)Rejected-Finance | H3 | Rejected-Finance HIGHER RATE QUOTED THAN L1 | |
| 5 | H4₹48.3 L−₹7.9 L (14.1%)Rejected-Finance | H4 | Rejected-Finance HIGHER RATE QUOTED THAN L1 |
| Sl No | Description | Qty | Unit | M/s Raj Kumar Chopra H8 | M/S SEHGAL CONSTRUCTION H6 | MS ROYAL CONSTRUCTION INDEX NO 158 2010 BKP H2 | SARASWATI ENTERPRISE (INDEX NO CEEC D-81) H7 | M/s Bhola Shah Bansi Lall H5 | M/S TILKU ENTERPRISE H4 | M/S DYNAMIC INDIA (PROJECT) CONSTRUCTION H3 | HAZRA ENTERPRISE H1 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. | 350 | Sqm | 62 ₹21,700 Lowest | 66 ₹23,100 | 67 ₹23,450 | 65 ₹22,750 | 66 ₹23,100 | 65 ₹22,750 | 70 ₹24,500 | 72 ₹25,200 |
| 2.00 | M&L for Rendering 15mm thick in CM 1:4 using liquid waterproofing compound as per manufacturer instruction on fair faces of brick work or concrete surfaces finished fair & even complete all as specified and directed.
Note:(WPC will be measured and paid separately) | 200 | Sqm | 292 ₹58,400 Lowest | 300 ₹60,000 | 315 ₹63,000 | 311 ₹62,200 | 302 ₹60,400 | 320 ₹64,000 | 325 ₹65,000 | 325 ₹65,000 |
| 3.00 | M&L for Rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces of wall finsihed fair and even. | 100 | Sqm | 279 ₹27,900 Lowest | 290 ₹29,000 | 315 ₹31,500 | 290 ₹29,000 | 287 ₹28,700 | 300 ₹30,000 | 320 ₹32,000 | 325 ₹32,500 |
| 4.00 | M&L for Rendering 5mm thick in CM 1:3 on fair faces of brick work or concrete surfaces of ceiling finsihed fair and even. | 50 | Sqm | 199 ₹9,950 Lowest | 220 ₹11,000 | 240 ₹12,000 | 220 ₹11,000 | 218 ₹10,900 | 225 ₹11,250 | 250 ₹12,500 | 255 ₹12,750 |
| 5.00 | M&L for preparation on new plastered surface of wall, chajja, parapet etc and applying two coats of cement base paint over one coat of alkali resistant primer etc complete all as specified and as directed. | 50 | Sqm | 70 ₹3,500 Lowest | 80 ₹4,000 | 108 ₹5,400 | 76 ₹3,800 | 77 ₹3,850 | 100 ₹5,000 | 110 ₹5,500 | 110 ₹5,500 |
| 6.00 | Material & Labour for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified. | 150 | Sqm | 142 ₹21,300 Lowest | 150 ₹22,500 | 154 ₹23,100 | 148 ₹22,200 | 146 ₹21,900 | 155 ₹23,250 | 154 ₹23,100 | 155 ₹23,250 |
| 7.00 | Material & Labour for preparation of new surfaces of plastered walls and applying Two coats of Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. over and including a coat of primer with 1.0 mm thick white wall care putty (premium quality) over plastered surfaces of walls to prepare the surface even and smooth complete all as specified. | 100 | Sqm | 152 ₹15,200 Lowest | 155 ₹15,500 | 156 ₹15,600 | 156 ₹15,600 | 159 ₹15,900 | 160 ₹16,000 | 159 ₹15,900 | 160 ₹16,000 |
| 8.00 | M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed. | 50 | Sqm | 30 ₹1,500 Lowest | 32 ₹1,600 | 42 ₹2,100 | 38 ₹1,900 | 36 ₹1,800 | 35 ₹1,750 | 40 ₹2,000 | 45 ₹2,250 |
| 9.00 | Supply only Liquid water proofing compound. | 7 | Ltr | 176 ₹1,232 | 175 ₹1,225 Lowest | 200 ₹1,400 | 185 ₹1,295 | 188 ₹1,316 | 180 ₹1,260 | 190 ₹1,330 | 220 ₹1,540 |
| 10.00 | Material and labour for Preparation of old decorated surfaces (plastered/unplastered) of walls/pillars /cornices by removing / scraping down all loose particle, smoke soot, moulds, moss & efflorescent salts, oil & greasy spots etc with using broom / steel patti / wire brush / sand papering or by any other mean and to make the surface even and smooth and also using sander machine (with provision of dust sucking) on uneven surface to make the surface even and smooth as directed by Engineer-in-charge and after preparing the surface smooth applying one coat of white wash on wall with using paint brush complete all as specified and as directed. | 2,000 | Sqm | 18 ₹36,000 Lowest | 20 ₹40,000 | 20 ₹40,000 | 20 ₹40,000 | 21 ₹42,000 | 21 ₹42,000 | 22 ₹44,000 | 23 ₹46,000 |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
25 Jul 2025, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE PANAGARH
GARRISON ENGINEER PANAGARH, MILITARY ENGINEER SERVICES, PO-PANAGARH, DISTT- BURDWAN, STATE-WEST BENGAL PIN-713420
All as per BOQ
2025_MES_718697_1
8500-355/E8
Open Tender
Civil Works
Works
180 days
PNNAGRAH
As per tender documents
6 documents required · 6 mandatory
₹500
GE PANAGARH
₹90,000
27 Aug 2025
5 Jul 2025
26 Jul 2025
5 Jul 2025
25 Jul 2025
18 Jul 2025
Amount
Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
M&L for Rendering 15mm thick in CM 1:4 using liquid waterproofing compound as per manufacturer instruction on fair faces of brick work or concrete surfaces finished fair & even complete all as specified and directed. Note:(WPC will be measured and paid separately)
M&L for Rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces of wall finsihed fair and even.
M&L for Rendering 5mm thick in CM 1:3 on fair faces of brick work or concrete surfaces of ceiling finsihed fair and even.
M&L for preparation on new plastered surface of wall, chajja, parapet etc and applying two coats of cement base paint over one coat of alkali resistant primer etc complete all as specified and as directed.
Material & Labour for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified.
Material & Labour for preparation of new surfaces of plastered walls and applying Two coats of Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. over and including a coat of primer with 1.0 mm thick white wall care putty (premium quality) over plastered surfaces of walls to prepare the surface even and smooth complete all as specified.
M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.
Supply only Liquid water proofing compound.
Material and labour for Preparation of old decorated surfaces (plastered/unplastered) of walls/pillars /cornices by removing / scraping down all loose particle, smoke soot, moulds, moss & efflorescent salts, oil & greasy spots etc with using broom / steel patti / wire brush / sand papering or by any other mean and to make the surface even and smooth and also using sander machine (with provision of dust sucking) on uneven surface to make the surface even and smooth as directed by Engineer-in-charge and after preparing the surface smooth applying one coat of white wash on wall with using paint brush complete all as specified and as directed.
Material and labour for Preparation of old decorated surfaces (plastered/unplastered) of ceiling by removing / scraping down all loose particle, smoke soot, moulds, moss & efflorescent salts, oil & greasy spots etc with using broom / steel patti / wire brush / sand papering or by any other mean including applying wall care putty where required for filling to depressions/nail holes/light cracks etc and to make the surface even and smooth and also using sander machine (with provision of dust sucking) on uneven surface to make the surface even and smooth (before and after applying putty as per site situation) as directed by Engineer-in-charge and after preparing the surface smooth applying one coat of white wash on ceiling surfaces with paint brush complete all as specified and as directed
Material and labour for preparation of old decorated surfaces (plastered/unplastered) of walls/pillars /cornices by removing / scraping down all loose particle, smoke soot, moulds, moss & efflorescent salts, oil & greasy spots etc with using broom / steel patti / wire brush / sand papering or by any other mean, including applying wall care putty where required for filling to depressions/nail holes/light cracks etc and to make the surface even and smooth and also using sander machine (with provision of dust sucking) on uneven surface to make the surface even and smooth (before and after applying putty as per site situation) as directed by Engr-in-charge, and after preparing the surface smooth applying one coat of 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification by using electric paint roller or roller , as per existing or as approved tint/colour complete all as specified and as directed.
Material and labour for preparation of old decorated surfaces (plastered/unplastered) of ceiling by removing / scraping down all loose particle, smoke soot, moulds, moss & efflorescent salts, oil & greasy spots etc with using broom / steel patti / wire brush / sand papering or by any other mean, including applying white cement based putty where required for filling to depressions/nail holes/light cracks etc and to make the surface even and smooth and also using sander machine (with provision of dust sucking) on uneven surface to make the surface even and smooth (before and after applying putty as per site situation) as directed by Engineer-in-charge, and after preparing the surface smooth applying one coat of 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification on the ceiling surfaces (washable) by using electric paint roller or roller brush, as per existing or as approved tint/colour complete all as specified and as directed.
Material and labour for preparation of old decorated surfaces (plastered/unplastered) of walls/pillars /cornices by removing / scraping down all loose particle, smoke soot, moulds, moss & efflorescent salts, oil & greasy spots etc with using broom / steel patti / wire brush / sand papering or by any other mean, washing down with water including applying white cement based putty where required for filling to depressions/nail holes/light cracks etc and to make surface even and smooth and also using sander machine (with provision of dust sucking) on uneven surface to make the surface even and smooth (before and after applying putty as per site situation) as directed by Engineer-in-charge, and after preparing the surface smooth applying one coat of cement base paint with paint brush or roller brush, as per existing or as approved tint/colour complete all as specified and as directed.
Material and labour for complete removal of existing treatment (any layers of existing treatment ) from walls/pillars/cornices by scraping down with using steel patti and mechanical sander machine (including provision of dust sucking) upto entire satisfaction of Engineer-in-charge, brooming and washing down with water including applying white cement based putty where required for filling to depressions to make the surface even and smooth by using sander machine (with provision of dust sucking) as directed by Engineer-in-charge, and after that applying two coats of cement base paint over one coat of alkali resistant primer as per approved tint/colour with using paint brush/roller brush, complete all as specified and as directed by Engineer-in-Charge.
Material and labour for complete removal of existing treatment (any layers of existing treatment ) from walls/pillars/cornices by scraping down with using steel patti and mechanical sander machine (including provision of dust sucking) upto entire satisfaction of Engineer-in-charge, brooming and washing down with water including applying white cement based putty for filling to depressions to make the surface even and smooth by using sander machine (with provision of dust sucking) as directed by Engineer-in-charge, after preparing the surfaces applying two coats of 100% Premium acrylic emulsion paint having antifugal ,VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm
Material and labour for complete removal of existing treatment (any layers of existing treatment ) from walls/pillars/cornices by scraping down with using steel patti and mechanical sander machine (including provision of dust sucking) upto entire satisfaction of Engineer-in-charge, brooming and washing down with water including applying white cement based putty where required for filling to depressions to make the surface even and smooth by using sander machine (with provision of dust sucking) as directed by Engineer-in-charge, after preparing the surfaces applying two coats of distempering with 1st quality acrylic distemper (ready mixed) (Plastic emulsion paint) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification.
Material and labour for complete removal of existing treatment (any layers of existing treatment ) from walls/pillars/cornices by scraping down with using steel patti and mechanical sander machine (including provision of dust sucking) upto entire satisfaction of Engineer-in-charge, brooming and washing down with water including applying white cement based putty where required for filling to depressions to make the surface even and smooth by using sander machine (with provision of dust sucking) as directed by Engineer-in-charge, after preparing the surfaces applying two coats of Finishing walls with textured exterior paint of required shade ,applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm complete all as specified and directed.
M&L, for preparation of old painted of wood and wooden based materials surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint by using gun spray complete all as specified and directed.
M&L, for preparation of old painted of steel surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint including steel staggings by using gun spray complete all as specified and directed.
M&L, for preparation of old painted of steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint including steel staggings by using gun spray complete all as specified and directed.
M&L, for preparation of old painted brick, stone, concrete and asbestos cement or plaster surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint any colour, any pattern/design complete all as specified and directed.
M&L for 1mm thick wall care putty on wall complete all as specified and as directed.
M&L for 1mm thick wall care putty on Ceiling complete all as specified and as directed.
M & L for writing letters or figures (block, roman,italic or Indian ) not exc 30cm height with thick synthetic enamel paint of any shade complete all as specified and directed.
Removal of plants of girth exc 5.0 cm and n.exc 30 cm including root from RCC/Brick surfaces, porung of acid chemical over root are of concrete surface and making in CM 1:3 or PCC 1:2:4 type B0 using 12.5mm graded aggregateincludingall accessories to reach the area of plant growth in buildings etc complete all as specified and directed.
MS ROYAL CONSTRUCTION INDEX NO 158 2010 BKP (BID ID -3369752)
M/S DYNAMIC INDIA (PROJECT) CONSTRUCTION (BID ID -3369732)
M/S TILKU ENTERPRISE (BID ID -3369710)
M/s Bhola Shah Bansi Lall (BID ID -3371304)
M/S SEHGAL CONSTRUCTION (BID ID -3369671)
SARASWATI ENTERPRISE (INDEX NO CEEC D-81) (BID ID -3370568)
M/s Raj Kumar Chopra (BID ID -3369561)
stage.html
html • 0.06 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .