GE/BAS-43/26-27 Provn of High mast light at Janglote station under GE Basoli.

Excavation in trenches n exc 1.5 m wide and n exc 1.5 m in depth for foundation of pole/stay and laying of UG cable/GI pipe and getting out in hard/dense soil complete all as specified and directed.

M&L returning, filling and including spreading, levelling, watering and well ramming in layers not exceeding 25 cm complete all as specified and directed.

Removing excavated material nexc 50m and depositing where directed at a level nexc 1.5mtr above the starting point, complete all as specified and directed.

Supply & laying of approved quality sand under cable upto 15cm before laying the cable and 8cm over the cable after laying, punned down to overall thickness of 18cm in trenches for cable cushioning complete all as specified and directed. (Punned thickness shall be measured)

Material and labour for well burnt, old size Sub Class 'B' brick covering protection to the eletric cable laid dry flat transversally along the length of cable with width equal to length of brick complete all as specified and directed .

Supply and laying in trenches/under roads/under floor/on walls in new position tubing GI Light grade of 40 mm nominal bore of pipe with screwed sockets joints (such as bends, elbow, tees, etc) complete all as specified and directed.

Supply & installation of Galvanized steel high mast lighting system of 12.5 metre in two section, 3 mm section thickness, top dia 150 mm, bottom dia 340 mm, with 2/3 wire rope system and its accessories &System is suitable for loading 10 Nos 80 to 150watt LED lights complete all as specified and directed. Note: (i)Foundation desgin shall be as per OEM and drawing should be submitted by OEM. (ii) Excavation, removal,and returning filling of soil & PCC M-15 for foundation shall be deemed to included in quoted rates.

Supply and fix flood light of capacity 100 Watt energy saving & environmental friendly long life versatile pressure die cast aluminium with ptotection IP66, 6500k made out pressure die cast aluminium housing suitable lens & tughened glass with high power LEDs as light source with electronic chip and driver complete all as specified and directedby .

Supply and fix for busbar chamber, 3 phase 415 volts 4 way having aluminium bus bar of capacity 63 amps, fixing on angle iron 40x40x5mm including PCC 1:3:6 complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35.0 sqmm 3.50 core complete all as specified and directed.