WORK SERVICES FOR DEVELOPMENT OF PARKING SPACE AT CAMERO COMPLEX AT SUBROTO PARK

Amount

Excavation in trenches n.exc 1.5m wide & n.exc 1.5m in depth, for foundation etc not exc 10 sqm on plan and getting out in hard/dense soil complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm in hard/dense soil complete all as specified and directed.

Removing excavated material n exc 50 m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation, filling and mass concrete complete all as specified and directed.

M&L for reinforced cement concrete M-25 design mix using 20 mm graded crushed stone aggregate as in foundations, footings, foundation beams; plinth beams;basement slab, seismic and other similar bands complete all as specified and directed.

M&L for reinforced cement concrete M-25 design mix using 20 mm graded crushed stone aggregate as in colomns, pillars, piers, posts and struts complete all as specified and directed.

M&L for formwork to flat sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits of foundation and plinth beams, band and similar work for fair finished surfaces complete all as specified and directed.

M&L for TMT bars 10mm dia and over, cut to length, bent to shape required,including cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9mm dia or securing with clips, quality conforming to IS complete all as specified and directed.

M&L for TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9mm dia or securing with clips, quality conforming to IS complete all as specified and directed.

M&L for mild steel bolts exc 12mm dia but n exc 20mm dia (dia of neck) purpose made, with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut, exc 30cm long complete all as specified and directed.

M&L for plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, ditto, with riveted, bolted or welded attachment conforming to grade Fe-410 -W(Gde E-250) quality complete all as specified and directed.

M&L for rolled mild steel section as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates conforming to grade Fe-410 -W(Gde E-250) complete all as specified and directed.

M&L for MS framed work of angle, tee, beam,channel, flat iron, conforming to Fe-410 -W(Gde E-250), as in roof trusses including distance pieces, cleats etc. welding or riveted complete all as specified and directed.

M&L for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for hard core broken stone/boulders of gauge exc. 63 mm but n.exc. 100 mm, deposit spread and levelled in layer n.exc. 15 mm thick watered and ramming to a true surface complete all as specified and directed.

M&L 75mm thick PCC 1:3:6 type C-2 as in sub base, floors, paving,plinth protection, finished even and fair without using extra cement complete all as specified and directed.

M&L for machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade with grey cement and pigment laid and bedded on sand cushioning complete all as specified and directed.

M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in hard/dense soil for roads to required slope gradient, camber etc complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint over a coat of red oxide or zinc chromate primer including preparation of new steel or iron surfaces exc 10 cm width or girth complete all as specified and directed.

shakti construction