Loading
Loading…
Loading…
Tender Value
₹3.1 Cr
EMD Value
₹6.2 L
Closing Date
16 Oct 2026, 3:00 pm
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
WORKS
14 conditions · 2 needing a document upload
IRGCC 2022 TENDER FORM SECOND SHEET & ACS 1 CLAUSE 10.22.Financial Eligibility Criteria: (As Per IRGCC Clause 10.2)10.2.Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where:V= Advertised value of the tender in Crores of Rupees.N= Number of years prescribed for completion of work for which bids have been invited.The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover.The Tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.10.3 Bid Capacity: The tender/technical bid will be evaluated based on bid capacity formula detailed as Annexure-VI.PLEASE READ ALL IRGCC TENDER FORM SECOND SHEET & ACS 1 CLAUSE 10.2 TO EVALUATE THE FINANCIAL ELIGIBILITY CRITERIANon submission of Annexure-VIB, along with copies of Audited Balance Sheets dulycertified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet by the tenderer shall result in summarily rejection of his / their bid" ( Click here to download Format)
IRGCC 2022 TENDER FORM SECOND SHEET & ACS 1 CLAUSE 10.1 1.Technical Eligibility Criteria: (As Per IRGCC Clause 10.1) (a)The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: 1Three similar works each costing not less than the amount equal to 30% of advertised value of the tender OR 2Two similar works each costing not less than the amount equal to 40% of advertised value of the tender OR 3One similar work costing not less than the amount equal to 60% of advertised value of the tender Note for Item 10.1: Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate. PLEASE READ ALL IRGCC TENDER FORM SECOND SHEET & ACS 1 CLAUSE 10.1 TO EVALAUTE THE TECHNICAL ELIGIBILITY CRITERIA
Defination of Similar Work :- Any Signalling Work of EI/PI/RRI/IBH/ABH/ LC Gate Interlocking/Track circuit works/Axle counter works etc.
27 conditions · 2 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The definition and calculation of local content shall be inaccordance with the Make in India policy as incorporated in thetender conditions. Please refer to Make in India Policy attachedherewith for detailed information.
Complete tender document including NIT details, schedule, conditions is attached herewith. Tenderers are requested to read the tender document thoroughly before quoting their rates.
Tender will be governed as per latest standard Indian Railways General Conditions of Contract, works 2022 and their all correction slips. Tenderer are requested to read the latest IR GCC works 2022 and their all correction slips before submission of their offer and must be submit the all Annexures, documentary evidences, data as mentioned in IRGCC Works 2022 and their all correction slips.
All the documents in support of the Minimum Eligibility Criteria including Letter of Acceptance/Work Order, Documents showing the nature and total value of work, Completion report, Audited balance sheet, Attested certificate from Government employer, Copy of I.T. return etc. should be submitted along with the bid. Railway reserves the right to make or not to make any further reference to the tenderer regarding the fulfillment of the Minimum Eligibility Criteria and to award the tender only on the basis of the documents submitted by the tenderer along with the bid. The tenderer will not have any claim on this account.
Rights of the Railway to deal with Tender: The authority for the acceptance of the tender will rest with the Railway. It shall not be obligatory on the said authority to accept the lowest tender or any other tender, and tenderer(s) shall neither demand any explanation for the cause of rejection of his/ their tender nor the Railway to assign reasons for declining to consider or reject any particular tender or tenders. If the tenderer(s) deliberately gives / give wrong information in his / their tender or creates / create circumstances for the acceptance of his / their tender, the Railway reserves the right to reject such tender at any stage.
If the bidder submits Bid security in the form of Bank Guarantee "The original Bank Guarantee should be delivered in person receive and dispatch section of this office (i.e. DRM office, Signal & Telecom, Branch, West Central Railway, Jabalpur) before closing date for submission of bids (i.e. excluding the last date of submission of bids)
1.As per Railway Boards letter no. 94/CE-I/4 Pt.17 dated: 13.08.2012, for all work contract valuing more than Rs.10 Crore, "two Packet System" of tendering mandatorily be followed. 2.As per Railway Boards letter no. 2002/CE-I/CT/37 JV Pt.VIII dated: 14.12.2012, "JOINT VENTURE FIRMS" shall now be applicable to the works tenders of value More than Rs. 10 Crores. 3.This is highly technical work to be executed only by qualifying MEC stipulated in tender document as per IR GCC 2022 with similar work issued vide CSTE office letter no. WCR/N- HQ/150/Wks/Policy/14 dated: 03.08.2018. No any relaxation in MEC will be given for any consideration. Firm failing to satisfy the MEC will be treated as ineligible firm. (IF MEC APPLICABLE) 4.In terms of railway board's letter no. 2020/CE- I/CT/3E/GCC/Policy dated: 30.12.2020, If the bidder is banned for submission of bids on the date of closing of tender, such bid, even if received, shall be treated as invalid while evaluating the bids. 5.Change of inspection authority may be done by engineer- incharge at a later date. 6.In case of more than one valid & eligible L-1 bidders, tender may be awarded to tenderer having higher bid capacity. In case bid capacity is also the same, tenderer having done more value of similar work in last three previous financial years and current financial years up to the date of the opening of the tender, may be selected for the award. Instructions with respect to bid capacity will follow. Supporting document for this may be clearly uploaded by tenderer with their offer. 7.The provisions contained in railways circulars, JPO's regarding penalties will be applicable for works requiring digging. 8.As per railway boards letter no. 2017/CE- I/CT/9 dated: 31.05.2023 "for all contracts costing more than Rs.5 crore, Contractor's e-MB is mandatory and contractor's e- MB should be part of Tender Document. All other provisions of railway boards letter no. 2017/CE-I/CT/9 dated: 31.05.2023 will be followed. (If applicable)
West Central Railway Joint procedure order for undertaking earth work in the vicinity of electrical, signalling, telecom cables issued vide no. WCR/N-HQ/110/JPO Corrsp/Sig.-99 dated: 08.01.2024 instructed vide GM (S&T) JBP letter no. JBP/N.H.Q.120/Policy/T-1/Part-V dated: 10.01.2024 and procedure for undertaking digging work in the vicinity of signalling, electrical and telecommunication cables issued by railway board vid eno.2021/Tele/5(2)/3-Part(1)(3425647) dated 12.06.2023 or any other latest JPO by railways will be applicable in this contract
It is responsibility of the contractor during execution the work near the track, that all safety precautions will be taken like; Safety Jacket, wearing of Safety Shoes and Helmet to avoid any type of causality.
SPECIAL CONDITIONS AND SCOPE OF WORK OF THIS WORK WILLBE AS PER CONDITIONS MENTIONED IN TENDER DOCUMENT ATTACHED HEREWITH
RATES: The rates (if accepted) quoted by the bidder will be inclusive of all taxes & duties, GST livable by state/central government/local government. Compliance of GST Act/Rule and any Correction /Modification issued by Railway Board/Government in Regard to GST act shall be binding to the contractor.
COMPLIANCE OF LABOUR LAWS & REGISTRATION: Contractor should comply with the latest applicable labour laws. You will be advised to contact Regional Labor Commissioner, Jabalpur for necessary action. Contractor is to abide by the provisions of Payment of Wages ACT & Minimum Wages ACT and all other Labour provisions as per IRGCC Works and all its Advance correction slips
SHRAMIK KALYAN. : You will be advised to register yourself on Railway Board website www.shramikkalyan.indianrailways.gov.in & upload the required information regarding the awarded tenders to bidders by this office.
ENGINEER INCHARGE: Sr. Divisional Signal & Telecom Engineer/Co. /JBP will be the Engineer in-charge of the work
FINANCE OFFICER: Sr. Divisional Finance Manager / Jabalpur will be the Associate Finance Officer
CONSIGNEE: Consignee depot as mentioned in tender documents attached herewith or as nominated by Engineer In- charge will be Consignee depot for supply materials. Sectional SSE In-charge of the respective station or as nominated by engineer in charge will be site supervisor for the execution of the work. Measurement of execution of work will be certified by sectional SSE/SIG duly endorsed by respective ADSTE's and measurement will be recorded in MB by Consignee depot as mentioned in tender documents attached herewith. Sectional ADSTE will be Field Engineer for the execution work of respective section.
TEST CHECK: 20% check shall be certified by the officer as mentioned in tender documents in Measurement Book.
SUBSTITUTE: The Engineer-in-charge of the work may substitute these officers/supervisors at a later date as per Railway requirement.
If any document/information submitted by you found false/incorrect/forged in any manner then action will be taken as per codal provisions of railways.
IRGCC works 2022, Part-I, clause 7 i.e. 7. "Right of Railway to Deal with Tenders: The Railway reserves the right of not to invite tenders for any of Railway work or works or to invite open or limited tenders and when tenders are called to accept a tender in whole or in part or reject any tender or all tenders without assigning reasons for any such action. In case if tender is accepted in part by Railway administration, Letter of Acceptance shall be issued as counter offer to the Tenderer, which shall be subject to acceptance by the Tenderer. However, performance guarantee, security deposit and other financial transactions in the tender will be as per total contract value evaluated by e- tender module of IREPS and no any relaxation on performance guarantee, security deposit and other financial transactions will be given on account of banning of any/some items for procurement in this tender.
1. S&T work in connection with provision of Track Renewal Jabalpur division of West Central Railway (Signalling Work). 2. S&T work in connections with turnout renewal in JBP-KTE Section of Jabalpur Division on West Central Railway (Signalling work).
JBP-N-SIG-TENDER-2026-33~WCR
JBP-N-SIG-TENDER-2026-33
Open
Works - General
11 Months
Jabalpur, Madhya Pradesh
₹0
₹6.2 L
24 Sept 2026
24 Sept 2026
2 Oct 2026
229 items across 3 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 1,75,52,360.78 | ||
| — | 18.00 | — | — | ||
| Supply of SPT phone for IBS. (which shall be installed on IBS post)along with one no. of slave unit being installed in SM'S office (both master and slave unit must work on 24V DC and must be suitable for 25KVAC RE area).as per instructions of site in-charge, ACES make or similar . Note: The contractor shall ensure that there is no interface in communication between the master and slave units owing to power hump due to RE induction. Cable from IB signal unit to the cable termination board in SM's room/relay room will be provided by the Railways. It shall work on OFC or quad cable & it shall ensured by contractor before supply of the item. INSPECTION BY CONSIGNEE. | — | — | — | 2,58,299.28 | |
| — | 160.00 | — | — | ||
| Insulation of Ground connection insulations for thick web switch layout facing point (BG) for 52kg/60kg rail fitted with high thrust point machine comprising of the following: 1. Bush as per DRG. No. S3463-1no. and Washer as per DRG. No.S8640-2 no .for drive (throw) rod 2. Bush as per DRG.No.S 23199-1no. and Washer as per DRG. No. S 8640-2 no for short detector rod. 3. Bush as per DRG.No.S 23199-1no. and Washer as per DRG.No.S 8640-2no. for long detector rod. 4. Bush as per DRG.No.S 22179-1no. and Washer as per DRG .No. S 8640-2no. for short lock rod. 5. Bush as per DRG.No.S 22179-1no. and Washer as per DRG. No .S 8640-2no for long lock rod. 6. Bush 'B' as per DRG.No.S 8912 for LH lock slide-1 no. 7. Bush 'B' as per DRG.No.S 8912 for LH lock arm-2 no. 8. Bush 'B' as per DRG.No.S 8912 for RH lock arm -2 no. 9. Bush 'B' as per DRG.No.S 89i2 for RH lock slide-1 no. 10. Bush as per DRG.No.S 23199 -4no and washer as per DRG.No.S 8640-4no for LH lock slide. 11. Insulating Plate LH as per DRG.No.S 3404 RDSO/S 3593- 1no. 12. Insulating Plate RH as per DRG.No.S 3404 RDSO/S 3592-1no. 13. Bush as per DRG.No.S 23199-4no. and washer as per DRG.No.S 8640-4no for RH lock slide. INSPECTION BY CONSIGNEE. | — | — | — | 1,44,345.6 | |
| — | 155.00 | — | — | ||
| Insulations for the ground connection for point machine comprising of the following: 1) Switch extension piece insulation -1 set (Each set comprising of S3265 -1 no; S 3266-1 No; S23199-2No and 58640-4No.) 2) Stretcher bar insulation-3 sets (Each set consisting of T10367-1No., T10368-2No., T10371-4No.) 3) Gauge tie plate insulations-4sets (Each set consisting of T 10372- 1 No, T10368 -3 No and T10371-6 No.) 4) Drive lug insulation-1 set (Each set consisting of S 8804 - 1 No., S 8813 -2No. and S 8640-4No.) complete with bushes. Note- The type of insulation required will be specified by engineer in-charge of the work depending on the type of machine proposed (Universal /PTJ Make) as per specification. INSPECTION BY CONSIGNEE. | — | — | — | 2,86,830.6 | |
| — | 500.00 | — | — | ||
| Switch Plate lubricant Cenolube 100 or better Black colored which should be non- asphaltic Non bituminous blend of very heavy oils, inert thickeners and lubricating solids coupled with molybdenum disulfide and graphite with no traces of chlorinated solvent such as 1,1,1 trichloroethane which are flammable and harmful to the environment. Should have a blend of select high viscosity index solvent refined severely hydro finished paraffin base oils and synthetic base fluids. It should incorporate solid lubricants & additives to fill & lubricate micronized asperities to provide & form many films on the contact surfaces to prevent metal-to-metal contact. It shall be designed to be hand applied providing a tough adherent Lubricant film with Tacky semi-dry finish reducing contaminant adhesion. It should act as a SURFACE POLISH with high shear stability and UV protection. The grease Should Not form a difficult to remove thick DRY film which requires scrapping & solvent cleaning of Switch Plate specially before reapplication The grease should Not need Cleaning or scrapping before Reapplication. The Grease should be formulated for tropical climates and should not contain pour point depressants and should Not be too thin. The grease shall be Resistant to water wash off & dilution, water insoluble, non-melt and chemically resistant to exposed environment. The grease shall be formulated with Extreme Pressure additives, rust and corrosion inhibitors, anti-wear additives to protect external surfaces against the harsh elements in severe climates, thus reducing rust binding and adhesive wear on switch plates. Water washout-Excellent ASTM D4049 -water Spray Resistance (simulating rain). Minimal grease loss (<10%) under high- pressure water spray. Four Ball Weld LOAD (ASTM- D2596) >600 kg. @ 100c (ASTM D 4048) 1a -1b, packing /25kg Drum. /180 kg drum Inspection by RITES with GCTC from NABL accredited lab. | — | — | — | 24,50,005 | |
| — | 2.00 | — | — | ||
| Supply of STEU Card for siemens make MSDAC as per RDSO specn. no. RDSO/SPN/176/2013 ver.3 or latest. For Simens make MSDAC (Multisession Digital Axle counter). INSPECTION BY RDSO. | — | — | — | 1,79,360 | |
| — | 2.00 | — | — | ||
| Supply of Generator Module Suitable for Siemens make Multi section Digital Axle counter as per RDSO specification no. RDSO/SPN/176/2013 ver.3 or latest and firms specification. INSPECTION BY RDSO. | — | — | — | 1,38,432.1 | |
| — | 2.00 | — | — | ||
| Supply of Wheel Detection Sensor with 10 Mtrs cable suitable for SIEMENS make MSDAC (Multi section Digital Axle counter)as per RDSO specification No:- RDSO/SPN/176/2013, Ver-3 or latest. INSPECTION BY RDSO. | — | — | — | 3,18,364 | |
| — | 2.00 | — | — | ||
| Supply of multi lamp route indicator for [LED double Digit] from 0 to 19 white LED with housing as per specification (a)Two Digit LED Route Indicator capable of Displaying 1 to 19Route & Route' G'. (b) Visibility of 300 Mtrs in Clear Day Light.(c) Option for white Colours, Chromaticity as per BS-13376standard (d) Built with Robust AllnGan LED with junction temperature( Grater than 100degree Celsius) (e) Lamp Proving compatible with normal Bulb type multi lamp type route indicator housing (f)input operating voltage 110VAC+25 % (g) Uniform intensity over entire operating range (h)operating Temperature - 10degree Celsius to 60+ degree Celsius. Firm's accepted Make/Brand: EFFTRONICS or similar or better. INSPECTION BY CONSIGNEE. | — | — | — | 1,34,342.28 | |
| — | 2.00 | — | — | ||
| Supply of tools kit consisting of :- (a) Digital multi meter of suitable make for G.G. Tronics digital axle counter system with probe set 01 Nos. (b) train simulator ( high frequency ) 01 Nos. (c) extender card 01 Nos. (d) Dummy wheel 01 Nos. (e) Different type spanners suitable for G.G. Tronics digital axle counter 01 Set. (f) torque wrenches suitable for G.G. Tronics digital axle counter 01 Nos. (g) screw driver set suitable for G.G. Tronics digital axle counter 01 Set. (h) Carry bag for tools 01 Nos. Make/Brand:GGT INSPECTION BY CONSIGNEE. | — | — | — | 2,67,860 | |
| — | 4.00 | — | — | ||
| 21/25 KHZ TX Coil Assembly - 15 meter cable length Base clamp split-G36-T212505 for HASSDAC system suitable for G.G. Tronics India Pvt. Ltd. specification no. RDSO/SPN/177/2012 Version3, Make G.G.Tronics or similar INSPECTION BY RDSO. | — | — | — | 1,77,000 | |
| — | 4.00 | — | — | ||
| 21/25 KHZ RX Coil Assembly - 15 meter cable length Base clamp split-G36-R212505 for HASSDAC system suitable for G.G. Tronics India Pvt. Ltd. specification no. RDSO/SPN/177/2012 Version3, Make G.G.Tronics or similar INSPECTION BY RDSO. | — | — | — | 1,77,000 | |
| — | 2.00 | — | — | ||
| Supply of Transmitter Coil (Tx Coil) 21/25 KHz suitable for MSDAC of GG Tronics make as per RDSO Spec. RDSO/SPN/176/2013 Ver.-3 INSPECTION BY RDSO. | — | — | — | 91,473.6 | |
| — | 2.00 | — | — | ||
| Supply of Receiver Coil (Rx Coil) 21/25 KHz suitable for MSDAC of GG Tronics make as per RDSO Spec. RDSO/SPN/176/2013 INSPECTION BY RDSO. | — | — | — | 91,473.6 | |
| — | 70.00 | — | — | ||
| Supply of Track Relay QTA2 (AC immunised relay), 9 Ohm, 4F/2B or 2F/1B along with plug board (Base plate), retaining clips and connectors conforming to BRS:939A, BRS:938, BRS:966, IRS:S34 & IRS:S23. INSPECTION BY RDSO. | — | — | — | 4,43,299.5 | |
| — | 5.00 | — | — | ||
| Supply of Earth Electrode assembly as per Drg. No. S&T/ CON/ KOTA/ Earthing/01 INSPECTION BY CONSIGNEE. | — | — | — | 4,641.65 | |
| — | 29.00 | — | — | ||
| Supply of Relay AC-LED Universal ECR Siemens (Nos. A-RT-RG-A064) or equivalent with base plate and shall be suitable for working in series with 110V AC, LED based signal lighting unit. (For UECR also) INSPECTION BY RDSO. | — | — | — | 1,88,310.63 | |
| — | 25.00 | — | — | ||
| Supply of Spare electrical operated lifting barrier GI booms as per latest RDSO drgS- 11600 in maximum 4sections of 8 feet each. INSPECTION BY RITES/TPI | — | — | — | 9,84,557 | |
| — | 300.00 | — | — | ||
| Supply of Sealed Maintenance free VRLA Battery set of 60 cells (Stackable), in combination of 55+5 cells for SMPS based integrated power supply system, each cell of 2V/300AH capacity, fully charged, confirming to RDSO Specn. no. :IRS:S:93/96(A) with latest amendment. 1 number= 1 Cell INSPECTION BY RDSO. | — | — | — | 14,81,007 | |
| — | 4.00 | — | — | ||
| Supply of SEALED MAINTENANCE FREE VRLA BATTERY SET OF 60 CELLS 2V/200 AH CAPACITY EACH (STACKABLE), IN COMBINATION OF 55+5 CELLS FULLY CHARGED FOR SMPS BASED INTEGRATED POWER SUPPLY (IPS) SYSTEM, CONFORMING TO RDSO SPECIFICATION NO. IRS : S- 93/96(A) AMENDMENT NO.1 COMPLETE WITH CONNECTING LINKS AND SUITABLY NUMBERED IN STACKABLE RACKS ALONG WITH USER MANUALS. INSPECTION BY RDSO. | — | — | — | 8,63,646.72 | |
| — | 86.00 | — | — | ||
| Supply of "S" shape GI bend pipe medium class, 50 mm dia. and of 1 mtr length, for cable entry in point machines as per spec. IS:1239 (Pt. I) - 2004 or latest. INSPECTION BY CONSIGNEE. | — | — | — | 24,813.58 | |
| — | 2.00 | — | — | ||
| Supply of Aerol Smoke Detector Tester Spray or similar . INSPECTION BY CONSIGNEE. | — | — | — | 2,025.54 | |
| — | 10.00 | — | — | ||
| Supply of Timing Belt for locking L-98 Suitable for Global Device make ELB confirming to RDSO Specification No RDSO/SPN/208/2012 ver 2.0. INSPECTION BY CONSIGNEE. | — | — | — | 5,609.4 | |
| — | 10.00 | — | — | ||
| Supply of Relay Ac Immune, Plugin type, Style QBCA-1, DC Biased Point Contactor, 24V DC, 2F HD, 2HF-4BContacts Front Contacts Heavy Duty and Back Contacts Metal to Carbon Complete with Plug Board, Retaining Clips and Connectors, Conforming toBRS943, IRS S 34 and IRS S23.Material INSPECTION BY RDSO. | — | — | — | 56,724.4 | |
| — | 181.00 | — | — | ||
| Supply of low maintenance Lead Acid Secondary Cells 2V/ 80 Amp Hr. as per spec. IRS 88/2004 with latest amendments. INSPECTION BY RDSO. | — | — | — | 4,17,431.25 | |
| — | 100.00 | — | — | ||
| Supply of Wire IG 8 SWG for Bonding. Inspection by : Representative of Railway Engineer. INSPECTION BY CONSIGNEE. | — | — | — | 5,605 | |
| — | 2400.00 | — | — | ||
| Supply of Channel pin 7 mm dia. Inspection by: Representative of Railway Engineer. INSPECTION BY CONSIGNEE. | — | — | — | 2,280 | |
| — | 2.00 | — | — | ||
| Supply of digital multi meter digital type, three & three forth digit (3&3/4 digit) FLUKE 179/, MOTWANI M65 or Equivalent. INSPECTION BY CONSIGNEE. | — | — | — | 78,352.48 | |
| — | 2.00 | — | — | ||
| Supply of Component for Clamp type Ground connection for IRS point machines 220mm stroke as per annexure. INSPECTION BY CONSIGNEE. | — | — | — | 68,380.18 | |
| — | 32.00 | — | — | ||
| Supply of rotary CAM swath 4 NO/4NC .Current capacity 6 Amps DC type,-4TD46B, make- KAYCEE or similar. NOTE:Before placing order for all the materials to the firms concerned, Prior approval to be obtained from Railway's Engineer. INSPECTION BY RDSO. | — | — | — | 12,646.4 | |
| — | 30.00 | — | — | ||
| Supply of Lead Sealing Plier with 'SIG' Monogram on one face and Serial No.89 to 99 (one number each) on opposite side. INSPECTION BY CONSIGNEE. | — | — | — | 46,099.5 | |
| — | 50.00 | — | — | ||
| Retro reflective Board for mechanical and Electrical lifting barrier with retro reflective sheet Yellow. Drg No. S&T/JBP/09/004. INSPECTION BY CONSIGNEE. | — | — | — | 8,996 | |
| — | 1.00 | — | — | ||
| Supply of Sliding Boom Gate as per WCR drawing. This includes supply of 8 Nos. 'E' type lock with key as per Specification No. IRS:S-30/64 or latest. Key for 'E' type lock as per Drg No.3377/M with latest amendment ward no.to be fixed on MS plate as mentioned in the drawing and it include all the nut and bolt with washer, Anchor Bolt (750mm X 250mm) and PAD lock 6 (Six)lever (make - Godrej or better) with three keys. INSPECTION BY CONSIGNEE. | — | — | — | 1,38,042.63 | |
| — | 10.00 | — | — | ||
| Supply of VF Transformer (1120:470/ 1120:1120/ 470:470/ 470:600/1200:600 Ohm) as per Specification No.IRS-TC-76/2021 Ver 1.0 (Cylindrical type) or IRS/TC/22/ 2021 Ver 1.1(Rectangular type) with latest amendment. Inspection by RITES/TPI. | — | — | — | 12,024.1 | |
| — | 71.00 | — | — | ||
| Supply of Electric Point Machine (Rotary locking Type), 110VDC operation(AC immunity 160V) as per RDSO drg. S-11000with ground connection and clamp lock arrangement suitable or220mm throw for thickweb switches as per IRS-S-24/2025 Rev 3.0 or latest. INSPECTION BY RDSO. | — | — | — | 70,82,523.35 | |
| — | 30.00 | — | — | ||
| Supply Of Relay Plug In Type " Universal - Led " All Aspects Ecr. Ac Lamp Proving Unit With Inbuilt Current Transformer Type Slow Release Neutral Line Relay, 4 B, 4F Contacts, Front And Back Contacts Metal To Carbon, Shall Be Suitable For Working In Series With The 110 Vac , Led Signal Lamp Rated At 15 Watts Confirming To Rdso Specification Sts/E/Relays/Ac Lit Led Signal/09/2002, Brs : 941A, Irs: S-34 & Irs: S-23 ( As Applicable) Interlocking Code Shall Be Abdhk Or Latest. INSPECTION BY RDSO. | — | — | — | 1,87,437 | |
| — | 500.00 | — | — | ||
| Supply of 35 sqmm Multi-strand single core FRPVC insulated copper cable as per IS:694 for connecting main earth electrode to MEEB. INSPECTION BY CONSIGNEE. | — | — | — | 1,88,855 | |
| — | 5.50 | — | — | ||
| Supply of PVC insulated flexible wire 16/ 0.2 mm dia as per RDSO spec. Nos. IRS:S- 76/89 with latest amendments of various colours INSPECTION BY CONSIGNEE. | — | — | — | 46,162.27 | |
| — | 2.00 | — | — | ||
| Supply of pre wired powder coated MS Cabinet at least 42 U for housing UFSBI electronic modules with error logger, relay racks, SPD modules, 4 No. of QN1 (8F/8B)relays per pair & 8 No. QNN1 twin coil relay base etc. as required for commissioning of UFSBI electronics in IBS/ABS application as per IRS Specn. No. IRS:S- 104/2012 Ver.0 with latest amendment. INSPECTION BY CONSIGNEE. | — | — | — | 3,32,383.84 | |
| — | 2.00 | — | — | ||
| Supply of Phoenix make Portable Printer Kit, THERMOMARK GO.K SET, Part No.1184148 It includes supply of (I) Thermo mark Go. K, Part No. 184146, 01 Nos. (ii) Thermo mark Go Adapter, Part No. 0805010, 01 Nos. (iii) Thermo mark Go ACCU Battery, Part No.0805009, 01 Nos. (iv) Thermo mark Go Case, Part No. 1229456, 01 No. (v) MM-EMLF (EX18)R C1 Flexible Label White, Part No. 0803939, 01 No. (VI) MM-EMLC (EX18)R Fabric Label white, Part No. 0803936, 01 No. (vii) MM-EMLF (EX12)R Flexible Label Yellow, Part No. 0803942, 01No. (viii) MM-EMLF (EX18)R Flexible Label Yellow , Part No. 0803943, 01 No. (ix) MM-WMS 4.8 (EX9)R Heat Shrink Sleeve White, Part o.0803924, 01 No. (x) MM-WMS 6,4 (EX10)R Heat Shrink Sleeve Yellow, Part No.1116141, 01 No. INSPECTION BY CONSIGNEE. | — | — | — | 1,13,148.02 | |
| — | 6.00 | — | — | ||
| Heat Shrink Sleeve-White Color-10 mm, Item description as MM-WMS, 6.4 (EX10)R C1 INSPECTION BY CONSIGNEE. | — | — | — | 42,572.28 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
3JPO10-1-2412-6-23.pdf
ATTACHMENT
1GCCWORKS2022ACS1TO12.pdf
ATTACHMENT
MAKEININDIAPOLICY.pdf
ATTACHMENT
eBGletterdated16.06.2026.pdf
ATTACHMENT
4Letterforshramikkalyanportal_1.pdf SHRAMIK KALYAN LETTER
ATTACHMENT
TD-33-CTR25-26Dis25-3166NOS.pdf TD 2026 33 ctr ttr
ATTACHMENT
4Letterforshramikkalyanportal_1.pdf
ATTACHMENT
TD-33-CTR25-26Dis25-3166NOS.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .