271/PR/JUSNL/2026-27

Earth work in excavation in foundation trench in ordinary soil and disposal of excavated earth as obtained to a distance upto 50 M. including all lifts, leveling, ramming the foundation trenches ,removing roots of trees, shurbs all complete as per approved design, building specification and direction of E/I.

Providing coars clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150 mm thick with all leads and lifts including cost of all materials, labour, royalty and taxes all complete as per building specification and direction of E/I.

Providing designation 75A one brick flat soiling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I.

Providing P.C.C. M-150 in nominal mix of (1:2:4) in foundation with approved quality of stone chips 20 mm to 6 mm size graded and clean coars sand of F.M 2.5 to 3.5 including screening shuttering mixing cement concrete in mixer and placing in position, vibrating, striking curing taxes and royalty all complete as per building specification and direction of Engineer-in-charge.

Providing R.C.C. M-20 in nominal mix of 1:2:4 in foundation with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F. M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, cutting taxes & royalty all complete as per specification and direction of E/I.

Providing tor steel reinforcement of 10 mm ,12 mm, 16 mm dia bars as per design & drawing with cutting and bending with anealed wire with the cost of wire removal of rust , placing the rods in position ( excluding carriage of bars to work site ) all complete as per direction of E/I. (a) 10 mm TMT coil Fe 500 ) {Only valid for Tata (Tiscon), SAIL, JSPL , Electrosteel Ltd. Bokaro and Vijag (RINL)

Providing tor steel reinforcement of 10 mm ,12 mm, 16 mm dia bars as per design & drawing with cutting and bending with anealed wire with the cost of wire removal of rust , placing the rods in position (excluding carriage of bars to work site ) all complete as per direction of E/I. (b) 12 mm TMT coil Fe 500 ) {Only valid for Tata (Tiscon), SAIL, JSPL , Electrosteel Ltd. Bokaro and Vijag (RINL)

Providing tor steel reinforcement of 10 mm ,12 mm, 16 mm dia bars as per design & drawing with cutting and bending with anealed wire with the cost of wire removal of rust , placing the rods in position ( excluding carriage of bars to work site ) all complete as per direction of E/I. (c) 16 mm TMT coil Fe 500 ) {Only valid for Tata (Tiscon), SAIL, JSPL , Electrosteel Ltd. Bokaro and Vijag (RINL)

Providing reinforcement ..(ii) 8mm

Carriage of Materials

Sub-Total (A)

GST amounting Rs on (A)

Sub Total(B)

Labour Cess @ 1% on B

Grand Total

Amount in words:-

Note :- Only fill in Blue coloured block.