CONSTRUCTION OF NEW IB BUILDING AT GOTUR VILLAGE IN HUKKERI TALUKA OF BELAGAVI DISTRICT.4059-PW-BUILDINGS FOR THE YEAR 2024-25.

CONSTRUCTION OF NEW IB BUILDING AT GOTUR VILLAGE IN HUKKERI TALUKA OF BELAGAVI DISTRICT.

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, to...

Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...

ADD FORMWORK FOR FOOTING ---- including cost of all materials, labor ,HOM,l

Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...

ADD FORMWORK FOR PLINTH BEAM ---- including cost of all materials, labor ,HOM,l

Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...

ADD FORMWORK FOR COLUMN ---- including cost of all materials, labor ,HOM,l

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...

ADD FORMWORK FOR COLUMN ---- including cost of all materials, labor ,HOM,l

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...

ADD FORMWORK FOR LINTEL,SLAB BEAM ---- including cost of all materials, labor ,HOM,l

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...

ADD FORMWORK FOR SLAB & STAIRCASE ---- including cost of all materials, labor ,HOM,l

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...

ADD FORMWORK FOR CHAJJA ---- including cost of all materials, labor ,HOM,l

Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up...

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and ...

Steel Fabrication Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/we...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) inc...

Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:4 (1 cement :4 coarse sand) inc...

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel...

Providing & fixing of 3track 2panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016 sections and with minimum TiO2 Titanium Dioxide at 6PHR with TPEThermo Plastic Elastomerand le...

Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includ...

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mor...

Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, in...

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...

Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand ...

Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement con...

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: One coats on old work as per specifications and as per directions of Engineer in charge. ---- includi...

Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 L/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an even ...

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and for...

Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete a...

Providing and fixing in position fully panelled Honne wood shutters forN doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing ...

Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, di...

Varnishing with varnish of approved brand and manufacture :Two coats glue sizing with spar varnish or an under coat of flatting varnish to give an even shade and produce a smooth dry and mat surface i...

Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani...

Providing lath plaster with cement mortar 1:3, 5cms thick with 6mm dia mild steel bars at 20 cms. c to c both horizontally and vertically fixed with chicken mesh for drop chajja,facia, backing to cup ...

Providing and fixing 304 - grade stainless steel hand rails of 14-gauge pipes for Ramps or Staircase are made out of stainless steel hallow pipes, using 50mm dia for verticals @1.60 mtr c/c are fixed ...

Providing and laying Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and...

Providing and fixing ISI marked oxidised M.S. single acting spring hinges with necessary screws etc.125mm ---- including cost of all materials, labor ,HOM,l

Providing and fixing Hold fasts for doors etc complete ( Material Components P.No -A25 I.No 444 ) ---- including cost of all materials, labor ,HOM,l

Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete :125mm ---- including cost of all materials, labor ,HOM,l

Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. ---- including cost of all m...

Providing and fixing aluminium tower bolts, ISI marked, anodised (an- odic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws e...

Providing and fixing Screws approved Nails and screws of sizes for structural glazing /ACP Cladding ( Material Components P.No - A28 I.No 548 ) ---- including cost of all materials, labor ,HOM,l

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, e...

Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed ti...

Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance 1mm), with wall thickness 2.0 mm ( 0.2 mm), corners of the door frame t...

Providing fixing 30mm thick factory made rigid foam Panelled Door Shutters made from M.S. tube of 19 gauge thickness, size 19x19mm for stiles and 15x15mm for top & bottom rails, covered with heat moul...

Providing flooring with 25mm thick polished Cuddapah slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mi...

Providing and fixing of wall cladding using 20mm thick gang saw water cut Shiva gold granite, grey granite in CM 1:3 (1 cement : 3 coarse sand) proportion cut to required shape, pattern with paper joi...

Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the ...

Providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of M -30 grade made of C&D waste by block making machine with vibratory compaction laid in require...

8.31 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives with pure Acrylic Resin, UV resistant, dirt & pick up resistant, Alkali & Water resistant of required shade: New...

Head room And Parapet

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...

ADD FORMWORK FOR COLUMN ---- including cost of all materials, labor ,HOM,l

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...

ADD FORMWORK FOR LINTEL,SLAB BEAM ---- including cost of all materials, labor ,HOM,l

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...

ADD FORMWORK FOR SLAB ---- including cost of all materials, labor ,HOM,l

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...

ADD FORMWORK FOR CHAJJA ---- including cost of all materials, labor ,HOM,l

Steel Fabrication Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/we...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) inc...

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mor...

Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, in...

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: One coats on old work as per specifications and as per directions of Engineer in charge. ---- includi...

Providing Sal wood frames for false ceiling, partitions etc., main battens of size 50x12.5mm at 600 mm c/c and cross battons 38mmx50mm at 600mm c/c sawn and putup including cost of materials, labour c...

Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround doo...

Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 L/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an even ...

Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, di...

Varnishing with varnish of approved brand and manufacture :Two coats glue sizing with spar varnish or an under coat of flatting varnish to give an even shade and produce a smooth dry and mat surface i...

Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani...

Providing and fixing ISI marked oxidised M.S. single acting spring hinges with necessary screws etc.125mm ---- including cost of all materials, labor ,HOM,l

Providing and fixing Hold fasts M.S. for doors etc complete (Material Components P.No -A25 I.No 444 ) ---- including cost of all materials, labor ,HOM,l

Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete :125mm ---- including cost of all materials, labor ,HOM,l

Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. ---- including cost of all m...

Providing and fixing aluminium tower bolts, ISI marked, anodised (an- odic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws e...

Providing and fixing Screws approved make SS Screws of sizes for structural glazing /ACP Cladding (Material Components P.No - A28 I.No 548) ---- including cost of all materials, labor ,HOM,l

Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied ...

Supplying heavy gauge PVC conduit pipe . mm dia.mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The cond...

25 mm dia 2 mm thick

---- including cost of all materials, labor ,HOM,l

Supplying heavy gauge PVCConduit Pipe . dia . mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement p...

25 mm dia 2 mm thick ---- including cost of all materials, labor ,HOM,l

Supplying And Fixing Metal Fan Box with Round Hook. ---- including cost of all materials, labor ,HOM,l

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire...

Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch box

---- including cost of all materials, labor ,HOM,l

Long point above 6Mtr upto 10Mtr from tapping point to out let via switch box

---- including cost of all materials, labor ,HOM,l

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

---- including cost of all materials, labor ,HOM,l

---- including cost of all materials, labor ,HOM,l

---- including cost of all materials, labor ,HOM,l

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall

---- including cost of all materials, labor ,HOM,l

---- including cost of all materials, labor ,HOM,l

---- including cost of all materials, labor ,HOM,l

---- including cost of all materials, labor ,HOM,l

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

---- including cost of all materials, labor ,HOM,l

---- including cost of all materials, labor ,HOM,l

---- including cost of all materials, labor ,HOM,l

---- including cost of all materials, labor ,HOM,l

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6A One Way Switch

---- including cost of all materials, labor ,HOM,l

6A Two Way Switch

---- including cost of all materials, labor ,HOM,l

6A Three Way socket

---- including cost of all materials, labor ,HOM,l

Stepped Fan Regulator Two Module

---- including cost of all materials, labor ,HOM,l

---- including cost of all materials, labor ,HOM,l

---- including cost of all materials, labor ,HOM,l

TV/Telephone Socket

---- including cost of all materials, labor ,HOM,l

16A One Way Switch

---- including cost of all materials, labor ,HOM,l

6/16A Universal Socket

---- including cost of all materials, labor ,HOM,l

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...

---- including cost of all materials, labor ,HOM,l

---- including cost of all materials, labor ,HOM,l

Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 p...

---- including cost of all materials, labor ,HOM,l

Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board.32-40A 2 pole

---- including cost of all materials, labor ,HOM,l

---- including cost of all materials, labor ,HOM,l

Supplying exhaust fan of 1440 RPM of 300 mm (12") size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply.

---- including cost of all materials, labor ,HOM,l

Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball be...

Supplying of .feet -PVC Batten with integrated LED tube . W with high quality diffuser with Life of 25000 burning hours 70 lumen maintenance with CRI 80. Power Input: 220-240V 50/60Hz & Power factor 0...

LED light fitting 1 x 4' - 20/22 W

---- including cost of all materials, labor ,HOM,l

Supply of round/square recess/surface mounted rolling type LED Down light with . W GU 10 LED Lamp Rib Fabricated from diecast aluminium with white powder coated prewired to mains connector & has swive...

LED square or round down light 15-18W

---- including cost of all materials, labor ,HOM,l

Supplying of recess mounting non integral type . LED w luminaire comprising of pressure decast/extruded aluminium housing, with spring loaded false ceiling clamps, Power LEDs with CCT 6500 degree K, C...

Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyc...

---- including cost of all materials, labor ,HOM,l

Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit shoul...

GI/Copper strips for grounding connections, using necessary fixing materials as required.GI/Copper strips 25 x 3 mm GI strip

---- including cost of all materials, labor ,HOM,l

Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, r...

Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S'' hook with fan regulator to the existing board together with supplying and fixing 5 A. ceiling rose, necessary ...

Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and 5 A. ceiling rose with sufficient length of 23/0.0076 inch PVC insulated twin core wire.

---- including cost of al...

Supplying and Fixing of.mm dia class A GI pipe bracket upto 2 ms long bent at suitable angle and fixing to this bracket street light fitting of all capacities to GI or GI or rail or RCC pole / wall us...

Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires.

---- including cost of all materia...

Supplying of on load change over switches 4 poles, AC-23A Duty, 415V, 50Hz, AC Supply. (Open Execution)125 A

---- including cost of all materials, labor ,HOM,l

Supply and fixing of 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947.40 A

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of O...

Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage leakage curr...

Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, kVA, kWH, kVAR suitable for 3 phase, 4 wire LT network with ...

Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 32/63 A three phase 4 wire whole current class-1 Accuracy Energy Meter.

---- including cost of all materials, labor ,HOM,l

Supplying, fixing and wiring 1000/5A to 1600/5A 15VA Burden class 1 Current Transformer

---- including cost of all materials, labor ,HOM,l

Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C.

---- including cost of all materials, labor ,HOM,l

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-397570 Sqmm, ...

Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff35 to 95 Sqmm

---- including cost of all materials, labor ,HOM,...

Air ConditionerSupplying of . TR Invertor type split Air conditioners suitable for operation on A/C supply single phase 50 Hz 230 V with hermetically sealed inverter compressor with air cooled condens...

Installation charges for 1 to 2 Ton capacity window type Air Conditioner with 50 x 75mm thick teak wood frame of suitable size and allied works complete.

---- including cost of all materials, labor ,...

Extra for Fabrication supply and fixing of Stand fabricated using slotted angle /L angle of size 6mm x 50mm for mounting out door/indoor A.C. unit/ Batteries.

---- including cost of all materials, la...

Supplying, erecting, testing and commissioning of voltage stabilizer suitable for 170 to 270 v input and load variation from no load to full load, with over load protection, spike suppression, operati...

Supplying, erecting, testing & commissioning of OFF- LINE UPS system suitable for operation on 230V, 50Hz, A/C supply, with all accessories complete and Excluding batteries and wiring complete.5 kVA O...

Supplying, installation, testing & commissioning of 12V DC, AH batteries in poly propylene container for U.P.S. Sealed maintenance free batteries.

150 AH capacity

---- including cost of all materials...

External Electrification Material"RCC Pole - 9 Mtr Long, 145 Kg WL

(Dwg No. BESCOM/GM/QS&S/02 Dtd 24.11.2018) as per IS-785"

---- including cost of all materials, labor ,HOM,l

PSCC Pole - 9 Mtr Long, 200 Kg WL

(Dwg No. BESCOM/GM/QS&S/50 Dtd 24.11.2018) as per REC StandardS

---- including cost of all materials, labor ,HOM,l

Spiral Earth Electrode

---- including cost of all materials, labor ,HOM,l

11 kV, Horizontal Cross Arm - Galvanised Iron (GI)

---- including cost of all materials, labor ,HOM,l

11 kV, 5 kN Composite/Polymeric Pin Insulator (24 mm dia FRP Rod)

---- including cost of all materials, labor ,HOM,l

11 kV, 45 kN Polymeric Insulator

---- including cost of all materials, labor ,HOM,l

(6/3.35 mm Al + 1/3.35 mm St), Std Wt: 214 Kg/KM

---- including cost of all materials, labor ,HOM,l

11 kV, HG Fuse Unit with Solid Core Insulator

(Dwg No. BESCOM/GM/QS&S/21 Dtd 24.11.2018)

---- including cost of all materials, labor ,HOM,l

GOS as per IS-9921, IS-1977

11 kV, 200 Amps Single Break GOS

(Dwg No. BESCOM/GM/QS&S/23 Dtd 24.11.2018)

---- including cost of all materials, labor ,HOM,l

LT Protection LT Protection Kit

(Dwg No. BESCOM/GM/QS&S/10 Dtd 24.11.2018)

---- including cost of all materials, labor ,HOM,l

Distribution Transformer - 3 Phase, 11kV/433V - Stacked CRGO Core with Oil as per IS-1180 (Part-1): 2014 A. OPEN BUSHING TYPE 63 kVA, Aluminum Wdg, Star 2 (5 Star)

---- including cost of all material...

H - Frame Set for fixing 11 kV, 200 Amps Single Break GOS - (For DP structure for providing New GOS for sectionalisation) - MS

---- including cost of all materials, labor ,HOM,l

Double Pole TC Set for erection of Transformer on RCC/PSCC 9 Mtr Long Poles as per IS-1977 For 100/300 kVA 4/5 Star Rated Transformer on

RCC Pole - 9 Mtr Long, 145 Kg WL - MS

---- including cost of ...

External Electrification Labour

Erection of RCC/PSCC Pole of 9 to 10 Mtr long in a pit of 1.8 Mtr depth

---- including cost of all materials, labor ,HOM,l

Erection of RCC/PSCC Pole of 9 to 10 Mtr long in a pit of 1.8 Mtr depth

---- including cost of all materials, labor ,HOM,l

Providing Spiral Earth Electrode type earthing (without charcoal, salt etc.,)

---- including cost of all materials, labor ,HOM,l

Fixing guarding including fixing of necessary cross arms for existing HT and LT line at Road Crossing, Telephone Line Crossings upto span of 60 Mtr

---- including cost of all materials, labor ,HOM,l

do - for Rabbit ACSR

---- including cost of all materials, labor ,HOM,l

Fixing of GOS including wiring (11 kV Single Break 200 Amps)

---- including cost of all materials, labor ,HOM,l

Fixing of LT Protection Kit

---- including cost of all materials, labor ,HOM,l

Erection of Transformer & StructuresErection of 25 to 63 kVA Transformer on Transformer Structure

---- including cost of all materials, labor ,HOM,l

Erection of Double Pole Transformer Structure using 9 Mtr Long RCC (145 Kg WL)/PSCC (300 Kg WL) Pole including fixing of Structure Materials, Erection of Poles etc., complete for mounting of Transform...

Solar water heater

Supplying, installation, testing and commissioning of solar hot water heater comprising of solar Flat Plate Collector (FPC) of size 2120x1040x100mm and stainless steel hot water sto...

Whirlpool Total Volume for Direct Cool 226-240 Total Volume for Frost-free NA 4 star

(Whirlpool 237 Ltr 4S Direct Cool Refrigerator

---- including cost of all materials, labor ,HOM,l

LG Type/Category/Class of TV set Smart TV(2) Actual Screen Size (inches) 55 QLED (Quantum Dot LED)

---- including cost of all materials, labor ,HOM,l

Geyser Supplying.litres capacity vertical/horizontal type wall mounting Electrical water heater with 22 SWG copper/SS sheet metal inner Container tinned inside and anticorrosive paint outside and 20 S...

Erection charges for fixing a . litres capacity wall mounting electric geysers using bolts, flat at one end nut and washers at the other end for through bolts and nuts and washers with 150x450x600mm b...

Drain CONSTRUCTION For NEW IB BUILDING AT GOTUR VILLAGE IN HUKKERI TALUKA OF BELAGAVI DISTRICT.

1.14.1 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, cau...

1.23 Providing and Filling in foundation with granite / trap broken metal 100mm. and down size & with approved sand including hand packing, ramming, watering, including cost of all materials and labou...

2.1.3 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relev...

2.4.3 Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to...

2.11 Steel Fabrication Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, lapi...

water supply and sanitary

652 PVC pipe - OD 25mm and 10 Kg/sqcm m (VOL -5 , PAGE NO-A-44).

---- including cost of all materials, labor ,HOM,l

654 PVC pipe - OD 32mm and 10 Kg/sqcm m (VOL -5 , PAGE NO-A-44).

---- including cost of all materials, labor ,HOM,l

2.82 Supply of PPR Double Union Ball Valve confirming to IS 15801-2008 and

DIN Standards 8077/8092 2.82.1 PPR Double Union Ball Valve 20mm

---- including cost of all materials, labor ,HOM,l

2.82.2 PPR Double Union Ball Valve 25mm

---- including cost of all materials, labor ,HOM,l

2.82.3 PPR Double Union Ball Valve 32mm

---- including cost of all materials, labor ,HOM,l

2.78 Supply of PPR Male Threaded Elbow confirming to IS 15801-2008 and

DIN Standards 8077/8092.2.78.2 PPR Male Threaded Elbow 20X1/2mm

---- including cost of all materials, labor ,HOM,l

2.78.3 PPR Male Threaded Elbow 25X1/2mm

---- including cost of all materials, labor ,HOM,l

2.78.5 PPR Male Threaded Elbow 32X1/2mm

---- including cost of all materials, labor ,HOM,l

2.77 Supply of PPR Female Threaded Elbow confirming to IS 15801-2008

and DIN Standards 8077/8092 2.77.2 PPR Female Threaded Elbow 20X1/2mm ---- including cost of all materials, labor ,HOM,l

2.77.3 PPR Female Threaded Elbow 25X1/2mm

---- including cost of all materials, labor ,HOM,l

2.77.5 PPR Female Threaded Elbow 32X1/2mm

---- including cost of all materials, labor ,HOM,l

2.76 Supply of PPR Male Threaded TEE confirming to IS 15801-2008 and

DIN Standards 8077/8092.2.76.2 PPR Male Threaded TEE 20X1/2mm

---- including cost of all materials, labor ,HOM,l

2.76.3 PPR Male Threaded TEE 25X1/2mm

---- including cost of all materials, labor ,HOM,l

2.76.5 PPR Male Threaded TEE 32X1/2mm

---- including cost of all materials, labor ,HOM,l

2.75 Supply of PPR Female Threaded TEE confirming to IS 15801-2008 and

DIN Standards 8077/8092 2.75.2 PPR Female Threaded TEE 20X1/2mm

---- including cost of all materials, labor ,HOM,l

2.75.3 PPR Female Threaded TEE 25X1/2mm

---- including cost of all materials, labor ,HOM,l

2.75.5 PPR Female Threaded TEE 32X1/2mm

---- including cost of all materials, labor ,HOM,l

13.34 Providing and placing on terrace (at all floor levels) polyethylene

water storage tank, IS : 12701 marked, with cover and suitable locking

arrangement and making necessary holes for inlet, outle...

13.6.1.1 Providing and fixing gun metal non- return valve of approved quality

(screwed end) : 25 mm nominal bore-Horizontal ---- including cost of all materials, labor ,HOM,l

13.3.2 Providing and fixing brass stop cock of approved quality : 20 mm nominal bore

---- including cost of all materials, labor ,HOM,l

13.6.2.2Providing and fixing gun metal non- return valve of approved quality

(screwed end) :32 mm nominal bore

---- including cost of all materials, labor ,HOM,l

1.6.1 Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution ...

633 Poly Propylene Random Co-polymer (PPR) pipe with fitting SDR

7.4 -50 mm Outer dia (VOL -5 , PAGE NO-A-43).

---- including cost of all materials, labor ,HOM,l

14.3.1 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings ...

14.7.3 White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps

---- including cost of all materials, labor ,HOM,l

14.31Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers co...

14.40.2 600 mm long towel rail with total length of 645 mm, 78 mm wide and effective height of 88 mm, weighing not less than 190 g.

---- including cost of all materials, labor ,HOM,l

13.46 Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors: 100 mm i...

16.8 Constructing brick masonry chamber of internal dimension 600x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, pl...

16.10 Constructing brick masonry chamber of internal dimension 450x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, p...

13.32.2. Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe...

13.33.3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing...

647 PVC pipe - OD 110mm and 6 Kg/sqcm (VOL -5 , PAGE NO-A-44).

---- including cost of all materials, labor ,HOM,l

680 PVC pipes of 8 Kg/cm2 for 75mm(0.917)m (VOL -5 , PAGE NO-A-45).

---- including cost of all materials, labor ,HOM,l

M100 Supply and delivery at site special moulded variety PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments 10.9.6 - 75 mm dia PVC Elbows

10.9.8 - 110 mm dia PVC Elbows

---- including cost of all materials, labor ,HOM,l

14.77 Providing and fixing Wall Mixer Telephonic with L Shaped tubular bend set for overhead shower made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete ...

14.82 Providing and fixing Temperature controlled Overhead rain showers with

LED of minimum dimension 225x225mm & wall flange made of Stainless

steel with all concealed fitting arrangements & all ne...

sump tank septic tank and soak pit

1.14.1 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, cau...

2.1.3 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relev...

6.2 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand)...

8.2.2 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and...

8.12 Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers including cost of material etc as per specifications and as per direct...

8.11 Providing Neat cement punning to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing c...

2.5.1 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height...

FORMWORK FOR Sump & Septic Tank @ 35 % of the rate of above concrete item : Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, ...

2.11 Steel Fabrication

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, lapi...

18.3 Providing & fixing 455x610 mm cast iron cover with frame weight to be not less 38kgs (weight of cover 23 kgs and weight of frame 15 kgs)and necessary locking arrangements with M.S flats 32x6 mm e...

15.6 Providing and laying water proofing treatment to the Water tanks & Liquid Retaining structures with two component acrylic polymer modified cementitious waterproofing membrane with minimum elongat...

17.1 Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-i...

40 mm down size A-38 (volume 1)

---- including cost of all materials, labor ,HOM,l

20 mm down size A-38 (volume 1)

---- including cost of all materials, labor ,HOM,l

17.3 Supplying, filling, spreading &leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of ...

17.13 Providing and laying 100mm thick side wall & bottom slab and of 600mm width for drain with opening using M20 concrete reinforced with Micro Alloyed High carbon steel with 3mm - 3ply wired steel ...

Teak Wood Nagin Teapoy : Of size 3'x2'. Made out of Teak Wood leg size 3"x3" with carving. Top glass frame of size 3"x1.1/4" & 2"x 1.5" with 8mm tinted glass. Bottom magzine shelf required with 1.5'x3...

Teak Wood Side Teapoy : Size 1.3/4' x1.3/4 ' x1.5' made out of 2"x2" legs 2"x1.1/4" and 3"x1.1/4" side bars. Top with 8mm glass & reapers shelf with polish.

---- including cost of all materials, labo...

Teak Wood Carving Cot size 6'x7' : Made out of Teak wood cot Leg size 3"" x 3"", side bars (side runners) 5""x1.5"" , Leg side height 18"", head side height 33"". Top to be 18mm ply/partical board. Bo...

Teak Wood Sunrise Cot Single : Of size 6.5'x3'. Made out of Teak wood leg size 2"x3" . Side bars 4"x1.5". Leg side height 18". Head side 33". Head and leg side Teak wood patti. Cot shall be neatly fin...

Bed Side Table: (Small) Teak wood bed side table of size H-18" X D-15" X W-18". Made out of 2"X2" teak wood legs. The side table should have one drawer and one door, made out of 18mm ply on the front ...

TeakWood Square Leg Dinning Table : Of size 6'x3.5'. Made out of Teak wood leg size 4"x4". Table upper patti 4"x1.25". Top 18mm ply with sunmica or 12mm glass.

---- including cost of all materials, l...

Peacock Chair (Standard company) Seat, and Back half cushion with Cloth or Rexin ---- including cost of all materials, labor ,HOM,l

Teak Wood Horse Shoe Table : Of size overall Length 20'. L-16' x Width 2' or 2.5'x Height 2.5' =2 Nos. & 4' one "U" shape Table, such that when three table joined together and make one Horse shoe tabl...

High Back Cushion Chair :- High back Chair with seat and back high quality feather touch Rexin. Arms with cushioning. Chair to have 5 caster wheel legs with Syncro Mechanisum.

---- including cost of ...

Providing and fixing brass curtain rods of wall thickness 1.25 mm with two brass brackets fixed with brass screws and wooden plugs etc. wherever necessary complete.25 mm diameter

---- including cost...

Providing and fixing brass curtain rods of wall thickness 1.25 mm with two brass brackets fixed with brass screws and wooden plugs etc. wherever necessary complete.25 mm diameter

---- including cost...

Providing & fixing Roller Blinds of reputed make 38mm round Aluminium channel with blackout fabric, telting with chain (Ball) system with all necessary fittings and fixtures as per direction of Engine...

Providing & fixing 100% Polyester Curtains with specification of regular wash as per direction of Engineer in charge

---- including cost of all materials, labor ,HOM,l

Providing and supplying Pillow polyester fibre with good sleeping comfort of size 60cm x 40cm as per direction of engineer in charge

---- including cost of all materials, labor ,HOM,l

Providing & supplying 100% Polyester machine wash capable Blanket 80x90inches with calm and light colors as per direction of Engineer in charge of work

---- including cost of all materials, labor ,HO...

Providing & supplying 100% Polyester machine wash capable Blanket 66x90inches with calm and light colors as per direction of Engineer in charge of work

---- including cost of all materials, labor ,HO...

Providing and supplying King Size 6ft x 6ft Soft PU foam 5 inch thick mattress with better enhanced air circulation & breathability & sleeping comfort of size as per direction of engineer in charge

22.37 Providing and supplying Single size 6ft x 2.5ft Soft PU foam 5 inch thick mattress of reputed make with better enhanced air circulation & breathability & sleeping comfort of size as per directio...

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Rectangular...

Providing and Fixing Veneer Paneling over the 50mm x 35mm sal wood frame work and top covered out of 4mm thick approved veneer fixed over 12mm ply finished in melomine polish, complete including cost ...

Teak Wood Chair Seat & Back with Cushion / Rexin : Leg size 2"x1.5" with front and back legs of size 38"x2"x1.5".Handle of size 2"x1.5". Chair side bars 3"x1.1/4" pattis. Chair shall be neatly finishe...