Karnataka

Active

Works

Electrical

Construction of Government Primary School at Doddalahalli, Kanakapura taluk, Bengaluru south Dist.(Electrifiavtio work)

Public Works Department

PWD Electrical Division Office Bengaluru | Bengaluru Urban, Karnataka

Amount: Refer DocsCloses: 23 Jun 20262d left

Tender Value

Refer Docs

EMD Value

₹14,000

Closing Date

23 Jun 2026, 9:30 pm2d left

Similar Past Results

Similar tender results from the same govt authority in the past 3 years.

Tender Inviting Organisation

Name

Public Works Department

Work Description

Construction of Government Primary School at Doddalahalli, Kanakapura taluk, Bengaluru south Dist.(Providing Electrification work)

Tender Information

Tender ID

304411

Reference Number

PWD/2026-27/EL/WORK_INDENT36073

Tender Type

Open

Product Category

Electrical

Location

PWD Electrical Division Office Bengaluru

Source Website

Subscribe to view

Documents Required

5 documents required · 5 mandatory

Technical Bid

RequiredClass 3 and Above Electrical Inspectorate Registration Certificates

RequiredBalance Sheet & Profit and Loss Statement certified by a Registered Charted Account

RequiredWork done certificate issued by an officer not below the rank of Executive Engineer/ Equivalent.

RequiredTender capacity statement.

RequiredOngoing and existing commitments details

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by any State Government / Government of India /Union Territory.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of e-Procurement portal due to internet connectivity issues and technical glitches at bidders end.

The intending contractors are requested to note that, they should abide by the detailed instructions and conditions contained in the KW-1 tender document and further documents there on.

It is the responsibility of the licensed electrical contractor who executes the works to get services of the installations from the concerned Service Electricity Companies duly obtaining approval from the govt. electrical inspectorate as the case may be. However the department will pay the deposit/statutory fees if any after hearing the respective statutory bodies.

The responsibility of safe custody of electrical equipments/ materials, etc., shall be with the contractor until they are finally handed over to the Department.

The Tender shall bear all costs associated with the preparation and submission of his Tender, and the employer will in no case be responsible and liable for those costs.

Tenderer has to handover all the completed work to the respective authority and furnish the acknowledgement for the same before submission of final bill.

During the execution of, any Minor Civil works or any other works are to be executed it has to be done by the Reputed firms/Tenderer, from his end without any charges. Also he should work in coordination with the civil works.

The Tenderer shall not damage the existing building, while execution of electrical works.

The tenderer shall obtain the work done certificate in the prescribed format from the competent Authority Executive Engineer (District level Officer) and scan the original Certificate and attach the scanned file Certificate/ Certificates shall be produced at the time of opening of technical Bids for physical verification.

Whenever executing authority insist proof of having purchased the materials (used during executing the work) for verification. The contractor shall produce the purchase bills.

The Tenderer should furnish details of Works on Hand (Present Contract Commitment) must be enclosed separately.

The Employer reserves the right to reject any or all Tenders without assigning any reason.

The Department is not responsible for any delay in accessing e-procurement portal.

Clause 25.5 stipulates for tenderer to produce detailed rate analysis for various items if tender is seriously unbalanced. (i.e. where quoted rates are very high as well as where the quoted rates are less than estimated rated)

The bidders should submit the Bid capacity compulsorily. The details of balance work B value (works on hand & works for which tender submitted). Should be submitted in the prescribed format & should be signed by the concerned Executive Engineer / District level officer. In case the bidder does not furnish the above details/suppresses the actual facts/ produces false facts, along with the Technical bid, the technical bid of such bidder shall be considered for rejection.

The Tenderer must submit ongoing and existing commitments details separately.

The tenderer should furnish Name and Address Telephone Nos. Fax Nos. and email ID of the Tenderers Bankers detail

As per Karnataka State Government order No. LD/300/LET/2006 Bangalore Dated 01.01.2007 and G.No. PW/134/BMS/2007 Dt 27.7.2007, a sum amounting to 1% of the bill amount will be deducted welfare fund.

Conditional Tenders will not be accepted.

As per the Govt. Order No PW2BMS2019 Bangalore Dated 19-06-2019 the applicable GST shall be paid to the SR Items separately.

Technical Criteria

Past Experience

3.2To qualify for award of this contract, each tenderer in its name should have in the last Five years i.e. 2021-22 to 2025-26.b) Satisfactorily completed (at least 50% of the contract value), as prime contractor, at least one similar work i.e., Electrification Works of value not less than Rs 2.62 Lakhs in a single work.

Others -- Work done certificate issued by an officer not below the rank of Executive Engineer/ Equivalent

3.6Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under/ Assessed available tender capacity - (AxNx2.5-B) Where, A-Maximum value of construction works executed in any one year during the last five years (updated 2026-27 price level) taking into account the completed as well as works in progress. N Number of years prescribed for completion of the works for which tenders are invited. 0.25 Years (03 Months) B-Value, at 2026-27 price level, of existing commitments and on-going works to be completed during the next. 0.25 Years (03 Months) (period of completion of the works for which Tenders are invited) Note: The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent.

Others -- Tender capacity statement

Capabilities of Vendor

The tenderer as a Prime Contractor having valid Class-3 & above Electrical License issued by Electrical Inspectorate Govt. of Karnataka and should have suitable technical, financial & managerial capabilities.

Others -- Electrical Inspectorate License

The Tenderer must submit ongoing and existing commitments details separately.

Others -- ongoing and existing commitments Works List.

Financial Status

The Bidders shall deposit E.M.D of Rs. 14,000/- through any e-payment mode.

Others -- EMD

3.2To qualify for award of this contract, each Tenderer in its name should have during last five years i.e., from 2021-22 to 2025-26.a) The tenders must have achieved in at least two financial years an average annual financial turnover of an amount Not less than Rs.5.23 Lakhs during last five years. With UDIN Number certified by Chartered Accountant, If Failed to Satisfy the condition tender will be rejected Note: The returns submitted to the I.T. along with the Profit and Loss account statement, Balance sheet should be uploaded for the financial turnover criteria.

Others -- Audited CA Certificate of Annual Turnover

Others

NIl

Others -- Nil

Nil

Others -- Nil

Nil

Others -- Nil

Nil

Others -- Nil

Nil

Others -- Nil

Work Locations

Fee & Financial Details

Tender Fee Amount

₹500

EMD Fee Amount

₹14,000

Important Dates

Last Activity

8 Jun 2026

Published

8 Jun 2026

Bid Opening

24 Jun 2026

Download Ends

15 Jun 2026

BOQ Preview

•

Electrification works to proposed class room secondary school at Doddalahalli, Kanakapura Taluk, Bengaluru South Dist.

•

Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

•

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with ...

•

Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

•

Supplying heavy gauge PVC conduit pipe . mm dia.mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The cond...

•

Supplying heavy gauge PVC Conduit Pipe 19dia 2mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement p...

•

Supplying heavy gauge PVC Conduit Pipe . 25dia 2 mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cemen...

•

Supplying and fixing sheet Metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc.100 x 75 x 65 mm ---- Items of...

•

Supplying and fixing PVC/metal conduit Deep junction box 25 mm deep Junction box ---- Items of work are including cost and conveyance of all materials, labour charges for all items of work with all le...

•

Supplying And Fixing Metal Fan Box with Round Hook. ---- Items of work are including cost and conveyance of all materials, labour charges for all items of work with all lead and lift, loading and unlo...

•

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire...

•

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

•

Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for work...

•

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 8...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6A One Way Switch ---- Items of work are including cost and conveyance of all...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A Two Way Switch ---- Items of work are including cost and conveyance of al...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6A Three Way socket ---- Items of work are including cost and conveyance of a...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.Stepped Fan Regulator Two Module ---- Items of work are including cost and co...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.32A DP Switch ---- Items of work are including cost and conveyance of all mat...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6/16A Universal Socket ---- Items of work are including cost and conveyance o...

•

Supplying and fixing 32A security and energy saving DP switch with key tag suitable to operate on 230 V, 50Hz AC supply & completely wired on existing box. ---- Items of work are including cost and co...

•

Supply and fixing polished wood board made of not less than 15mm thick plank on both sides of not more than 2 pieces and fixing the same to the wall using tapered inverted wooden plugs screws.20" x 20...

•

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...

•

Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 p...

•

Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit shoul...

•

Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 20A single phase Class-1 Accuracy with Temper Proof Energy Meter. ---- Items of work are including cost and conveyance of all materia...

•

Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball be...

•

Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S'' hook with fan regulator to the existing board together with supplying and fixing 5 A. ceiling rose, necessary ...

•

Supplying of .feet -PVC Batten with integrated LED tube .W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with C RI . LED light fitting 1 x 4' - 36/40 W ---- Items...

•

Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, r...

•

Supplying & fixing of retrofit type - LED bulb . W with OPAL acrylic diffuser comprising of LED sour 2W, 6500K ---- Items of work are including cost and conveyance of all materials, labour charges for...

•

Supplying & Fixing of 250-400 W lamp Holder ---- Items of work are including cost and conveyance of all materials, labour charges for all items of work with all lead and lift, loading and unloading an...

•

Fabricating, supplying and erecting Swaged tubular Pole of height .m having three sections, and providing two coats of red oxide paint and finished with two coats of enamelled paint of approved qualit...

•

Supplying, and fixing of Hot dip Galvanized M.S.Bracket suitable for out door luminaries and mounted on Octagonal pole using necessary bolts, nuts etc., complete.Single Arm Bracket with 1500 mm Standa...

•

Supply of LED Streetlight luminaire with pressure die cast aluminium hous LED Streetlight 70W ---- Items of work are including cost and conveyance of all materials, labour charges for all items of wor...

•

Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires. ---- Items of work are including co...

•

Supply and fixing of 3pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947. ---- It...

•

Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers.63 A ---- Items of work are including cost and conveyance of all materials, l...

•

Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers.32 A ---- Items of work are including cost and conveyance of all materials, l...

•

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of O...

•

Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C. ---- Items of work are including cost and conveyance of all materials, labo...

•

Supplying and fixing hylum plastic sheet 3mm thick with necessary nitches for fixing switches, regulators etc., and fixing on existing wood or metal box using N. F. screws. ---- Items of work are incl...

•

Supplying of Aluminium End Terminal (Lug) 16 Sqmm ---- Items of work are including cost and conveyance of all materials, labour charges for all items of work with all lead and lift, loading and unload...

•

Making and Fixing of Epoxy Terminating Kit (Pothead) suitable for 1.1 kV, LTUG Cable Up to 4C x 50 Sqmm ---- Items of work are including cost and conveyance of all materials, labour charges for all it...

•

1.1 kV, XLPE or Heat resistant PVC insulated, Supplying of PVC exutruted Inner Seath

•

Armoured LTUG Cable as per IS-1554 (Part-

•

1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS...

•

Labour charges Laying of XLPE UG Cable using Conventional laying with excavation of soil

•

a) Cable trench excavation ---- Items of work are including cost and conveyance of all materials, labour charg...

•

Refilling and consolidation ---- Items of work are including cost and conveyance of all materials, labour charges for all items of work with all lead and lift, loading and unloading and HOM of machine...

•

Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff ---- Items of work are including cost and conveyance of all mate...

•

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

•

wiring for 1.1 Kv class HR (Heat resistant) PVC insulated & sheathed Aluminium single core lead wires as per IS:694:2010 as per 2010 asper Bescom Specifications PVC wire- 10Sqmm Weight per 100 mtr coi...

•

Providing laying and fixing GI pipes conforming to is 1239:1990 with latest amendments complete with Gi fittings (excluding the cost of fittings) with cuts and threads whereever necessary, including t...

•

Supplying of guy wire & GI wire as per BESCOM Specifications 10SWG GI wire (3.25mm dia std wt: 82kg/Km ---- Items of work are including cost and conveyance of all materials, labour charges for all ite...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

KPPP kw-1 bid 36073.doc

Tender Document • 1.06 MB

Ready to Participate?

Download all tender documents and submit your bid