ADDN ALTN TO BUILDING NOP90 TECH BLOCK DHOUNDIYAL BLOCK AT FDE PROVN OF 01XGENTS AND 01LADIES TOILET AT RC DEPT FEL AND OF FOUNTAIN ALLIED INFRA AND CHAIN LINK FENCING AT BLDG NO P173P174P175 AND P176 OFFR ACCN AND OTHER MISC WORKS GE MCEME SECBAD

Demolition of stone slabs & tiles of any thickness & in any position laid, bedded and pointed in any mortar otherwise specified.

Dismantling Aluminium framed work partition including ACP Sheet of any height

M&L Brick work with Fly ash modular bricks straight or curved on plan to any radius in half brick thick walls built in cm 1:4 complete all as apecified

Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering

M&L for Hardcore of broken stone or boulder of gauge exc 63 mm but n. exc 100 mm, deposited, spread and levelled in layers n. exc 15 cm thick, watered and rolled/ rammed to a true surface complete all as specifid.

M&LCement concrete 1:4:8 type D2 (using 40 mm graded aggregate) in foundations, filling and mass filling and mass concrete

M&L PCC 1:3:6 type C-2, 75 mm thick using 40 mm graded aggregate as sub base complete all as specified and directed.

M&L for Screed bed 15 mm thick in cement mortar 1:6 all as directed

M&L Non - skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and directed

M&L Glazed ceramic tiles in vertical surface 350x 250x7 mm / 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match all as specified and directed

M&L for rendering 15 mm thick on brick or concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement including one call as specified

M&L for preparation of internal surface of wall and applying two coat of plastic emulsion paint over a coat of primer all as specified and directed

Form work to sides and soffits of floor or roof beam, beam, hauchings, girders, bressum-emers, lintels, cantilevers, shelves incl supports overhangs etc also splays between floors and beams all as specified.

S&F MS TMT Bars of 10 mm dia and over,cut to length,bent to shape required including cranking, binding spirally for hooping for columns hooking ends and biniding with and including MS wire (annealed) not less than 0.9 mm dia or securining with clip all as specified.

Ditto, but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders

M&L RCC in Beams, cantilevers, bressummers, lintels over 1.5m span type B1 1:2:4 (12.5mm graded (20 mm graded aggregate)

Removing building materials etc. (other than spoil to a distance of 100m or under, beyond the lead included in the rates, including loading, unloading and stacking at the destination all as specified and directed

M&L for Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595 x 595 mm of approved texture with fully perforated 12mm thick micro traingular edge design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 4 76 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter locking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of size 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1 OOOmm length and L shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-charge

M&L Providing & fixing wall paneling at all heights with GRG (Glass Fibre Reinforced Gypsum) wall panel tiles of Size 595 x 595 mm of approved texture with fully perforated 12mm thick micro traingular edge design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 4 76 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true verticle level including Galvanised iron perimeter wall section of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-charge

Excavating in trenches n exc 1.5m wide and not exc 1.5m depth; for foundation, etc not exc 10 sqm on plan and getting out in hard/dense soil and all as directed

Returning filling in including spreading levelling watering and well ramming in layers not exceeding 25cm in hard/dense soil

Removal of excavated soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above starting pointand all as directed.

M&L for formwork to fair finished surfaces of sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter and all as directed

M&L for RCC Type M25 design mix ( 20mm graded aggregate) in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete and all as directed

M&L for formwork to fair finished surfaces to sides of pillars, posts, struts, piers, columns and stanchions and all as directed

M&L for RCC type M-25 Design mix ( 20mm graded aggregate) in columns, pillars, piers, posts and struts and all as directed

M&L for formwork to fair finished surfaces of timber form work to sides and soffits of floor or roof beam , lintels including support , overhangs etc also splays between floors and beams etc. and all as directed

M&L for RCC type M-25 Design mix ( 20mm graded aggregate) in beams, cantilevers,bressummers, lintels over 1.5m span.and all as directed

M&L for form work to chajjas, and similar work including edges for fair finished surfaces

M&L for RCC of type M-25 Design mix ( 20mm graded aggregate) in Chajjas and all as directed

M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200 mm thick and all as directed

M&L for RCC Type M-25 Design mix ( 20mm graded aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like and all as directed

M&L Brickwork with fly ash bricks, straight or curved on plan exc 6 Mtr mean raius built in CM 1:6 and all as directed

M&L Brick work with fly ash bricks, straight or curved on plane to any radius but in half thick built in CM 1:6 and all as directed

M&L for Rendering 15 mm thick cement plaster on fair faces of brick work/concrete in cement mortar 1:6, with water proofing compound finished even and smooth without using extra cement and all as directed.

M&L for Rendering 10 mm thick cement plaster on fair faces of brick work/concrete in cement mortar 1:6, finished even and smooth without using extra cement. and all as directed

M&L Rendering 5mm thick on fair faces of brick work or concrete surfaces in CM (1:3) in ceiling, complete all as specified .

Supply only integral water proofing compound

M&L for preparation of new plaster surface of wall and applying two coat of white wash over a coat of primer complete all as specified and directed

M&L for preparation of new plaster surface of wall and applying two coat of cement base paint over a coat of primer complete all as specified and directed

M&L applying two coats of white wash, over a coat of primer on new ceiling surface including preparation of surface, complete all as specified and as directed by Engineer-in-Charge.

M&L for cement concrete 75mm thick Type D-2 1:4:8 (using 40 mm graded stone aggregate) as in sub base and all as directed

M&L cement concrete type B1, 1:2:4 (20mm graded Aggregate) 40 mm thick in floor.and all as directed

Rendering 10mm thick in cement plaster 1:4 on brick wall surfaces for fixing tiles all as specified and as directed.

M&L for Non - skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and all as directed

M&L for rendering 10 mm thick in CM (1:3) using water proofing compound as per manufacturer instructions as in roof padding and chajjas complete all as specified. Note : Water proofing compound will be measured and paid separately.

M&L for APP based polymeric membrane minimum weighing 3.5kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) including 10cm side over lap and 15cm end lap laid over primed surface by torching method all as specified and directed. The roof treatement consisting of as under :- (i) Applying one coat of bituminous primer conforming to IS 3384 applied @ 0.30 Ltr/Sqm. (ii) Laying of APP based memberane as specifiedf thickness and weight. (iii) Applying coats of Solar reflective Bituminous aluminium paint @ 0.1 Kg/ Sqm over the membrane

S & F Anodised aluminium frame (Powder Coated) for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.

S&F Anodised aluminium door shutters (Powder Coated), aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified.

S &F Prelaminated particle board of thickness 18/19 mm, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to frameand all as directed.

S & F door closer hydraulically regulated of Aluminium(die cast body), designation No.3 universal type suitable for door shutters of 851 to 1200 mm in width and of weight between 61 to 80 kg complete all as specified and as directed.

S&F Solid PVC Door Frame of size 50 mm X 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing and all as directed.

S&F Factory made solid PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, supplying and fixing in the frame at site as per specification & drawing.

S&F Aluminum anodised, barrel tower bolts of extruded section and fixed of 150 mm long and all as directed.

S&F Aluminum alloy anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast - aluminum alloy and fixed of 300mm long and all as directed.

S&F Butt hinges, 100 mm long extruded aluminium alloy with galvanisedmild steel hinge pin, anodised and fixed, type c-21 and all as directed

S&F Extruded aluminium alloy handles, fabricated type, anodised,150mm long and all as directed

S&F in repair prepainted steel windows/ventilators ( ECO–4000 Series Windows (Double Rebate Windows) or equivalent) fabricated from roll framed sections made of galvanized steel colour coated/powder coated (Base steel as per IS-513 “D” quality galvanized as per IS-277 with zinc of 120 gms/Sqr. Mtr.) with total coated thickness of 0.58mm. Sections for Frame should be of 72x55mm, Section for Mullion should be of 72x50mm, Section for Shutter Frame should be of 47mm x 20mm, Section for Fixed Glass Bead should be of 12x12mm, and Section for Fly Mesh should be of 40x20mm Section for Frame Glazed Shutters and Mesh Shutters should be cut to length and miter joined with Polypropylene Corner Brackets, Mullion Section should be joined with Frame/Mullion using Mullion Cap Ethyl Propylene Damien Monomer (EPDM) Gasket should be used all around glass in shutter and Fixed Glass. Spoon Section should be used around Fly mesh to fix Mesh in Mesh Shutter including SS Pivot Hinges–1 set, Seccolor Handle & Seccolor Stay and 4mm Plain Float Glass and Stainless Steel 32 gauge Fly mesh of 25 holes per SqCM and powder coated Grill made of 10mm sq. MS Bars welded at 150mm c/c, 6x12mm MS flat and fixed to window frame with screws , complete all as specified and directed by Engineer-in-Charge. (Make : NCL/TATA/Equivalent)

Supplying and laying 16 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

Supplying and laying 20 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

S&F PVC ( SWR) soil waste pipe in any length Single socketed with rubber ring jointed laid in trenches or in floors/wall 110mm dia bore of pipe ISI marked.

S&F PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints laid in trenches or in floors/wall, including necessary brackets all as specified and directed .

S & F PVC (SWR) gully trap 125 / 110 mm including setting and jointing with solvent cement and removing old trap and making good all as directed by Engr in Charge

S & F PVC (SWR) floor trap, plain with Chromium plated grating including jointing with solvent cement with 75 mm outlet dia all as directed by Engr-in-charge.

S&F PVC (SWR) bends any radious 75mm bore all as specified.

S&F PVC (SWR) bends any radious 110 mm bore all as specified.

S&F viterous china wash basin, white flat back size 550mm x 400 mm including brackets with waste pipe including cutting for and pinning in ends of brackets or erecting stand with grating fixing to floor making good, fancy type complete

S & F fancy typ Pillar taps 15mm dia cast copper alloy with capstion heads, chromium plated , fancy type screwed down high pressure, with or without lettered 'Hot' or 'cold' with long screwed shanks and fly nuts screwed for 15mm dia pipe all as specified

S&F fancy type stop valve cast copper alloy 15mm bore chromium plated with long shank and cup (concealed type) screwed for both ends for iron pipe or PVC pipes and fixed all as specified and as directed.

S&F 15mm dia bib taps, chromium plated fancy type, cast copper alloy with fancy type handle , screwed down , screwed for iron pipe or for brass ferrule with wall flange, complete all as specified and as directed

S & F PVC connection 15mm dia 450 mm long with 2 Nos brass check nuts with washer etc complete all as specified by Engr-in-charge.

S & F in repairs Vitreous china wash down water closet pan (pedestal pattern) including 'P' or 'S' Trap with necessary, fixing arrangement including plastic water closet seat cover white with recessed bottom and cover fixed with aluminium hinging device complete all as specified and directed.

S & F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S&F Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe), complete all as specified and as directed by Engineer-in-Charge.

S&F Vitreous china urinal partition white of size 310x700 mm.and all as directed

S&F SS soap dish, any type, fixed to plugs with chromium plated brass screws, complete all as specified and directed by Engineer-in-Charge.

S & F PVC (SWR) 'P' trap dia out let is 110 mm all as specified

S&F 110 mm PVC (SWR) vent cowl complete all as specified

Low density poly ethylene pipes (LDPE) of pressure rating 6 kg/ cm2 laid in trenches, Bore of pipes in 40mm, complete all as specified

S&F CP brass tubular towel rail 600mm long 20mm dia 'D' type complete all as specified and as directed by Engineer-in-Charge.

S&F Gun-metal, globe or gate valves 20mm bore, with iron wheel head, screwed both end for iron pipe and all as directed

Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long and all as directed

S&F PVC valveless, syphonic action type flushing cistern low level, white, with inlet, ball valve, float and handle incl brackets capacity 10 ltrs and connection to pipe complete.

Grating 100 mm dia of PTMT (Minimum weight 25gms) and all as directed

M&L Rotational moulded polyethylene water storage tanks 500 Ltr (cylinderical vertical with closed top) including dismantling water tanks and also necessary float ball valves 20mm dia high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed .(Minimum weight 20mm - 210 gms) hoisted and fixed in position , complete all as specified and directed by Engineer-in-Charge.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in hard / dense soil complete all as specified and as directed by Engineer in Charge

M&L for Hardcore of broken stone of gauge n.exc 63mm deposited spread and levelled in layers n.exc 15cm thick watered and rammed to a true surface all as specified

M & L 75 mm thick PCC type D2, 1:4:8 (40mm graded aggregate) finished even and smooth with out using extra cement and all as directed

M&L for 20 mm thick screed bed or bedding layer of mortar in cement 1:6 for laying floor finishes

M&L chequered cement concrete tiles 30cm x30 cm x25mm thick , set jointed and pointed in neat cement slurry with grey cement and pigments and all as directed

M&L for 150 mm dia bore reinforced concrete pipes, class NP2, laid in trenches and jointed complete with collars etc complete and all as directed

M & L for cement concrete 1:4:8 type D2 to bed to drain pipe including packing under and hunching against sides of pipes after they are laid and tested for 150 mm dia pipe and all as directed

Cutting into existing manhole for connecting new drain, making good pipe and rending cutting out existing benching for and forming branch channel (1/2 round or 3/4 sec ) in cement concrete 1:2:4 type B1 smooth finished and reforming benching as required for 160mm dia.and all as directed

Excavating in post holes (or similar holes) each n.exc 0.5Cum, getting out, hard/ dense soil and removing soil to out side MD land complete all as specified and directed.

Supply only Chain link MS galvanisd fencing, any size or type compleate all as specified

Fixing only chain link MS galvanisd fencing, any size or type compleate all as specified

S&F mild steel round Bar 10 mm dia cut to length bent to shape as required, for fixing chain link fencing fixed with nut & bolt as in tie bar complete

S&F Mild steel flat iron for securing of chain link fencing conforming to Fe 290 Gde E-165 in post and strut in fencing including fabrication i.e. cutting tops drilling holes notching for wire welding etc..complete all as specified and directed.

S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut exc 15cm but not.exc 22.5 cm long,diameter of neck n exc12 mm complete all as specified and directed.

M&L for Preparation of new steel surfaces of any description over 10cm width or girth and application of two coats of synthetic enamel paint over one coat of red oxide primer etc,complete all as specified and directed.

M&L for Preparation of new steel surfaces of any description over 10cm width or girth and application of two coats of synthetic enamel paint over one coat of red oxide primer etc,complete all as specified and directed.

S&F,structural rolled mild steel Fe 410-00 (Gde E-250) as in roof members, posts,rails and fastenings and heavy bracket framming (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.

M&L for Vitrified, non slippery, extra glazed, durable, chemical resistant and highly water resistant tiles for competition swimming pool, any model, design, pattern, size and colour as approved in floors etc. pointed with epoxy grout matching with the colour of tiles, (grouting with Three Component, High Performance Epoxy Tile Grout, exceeds EN 13888 requirements), tested in accordance with AATCC 30 PART 3, in any position in swimming pool internal / external angles for floor and corners to meet the World Aquatics / FINA criteria, as per approved shade by GE, laid with approved High polymer modified, grey cement- based tile adhesive suitable for fixing medium format tile/stone in walls/floor conforms to IS 15477: 2019 Type 2T "Adhesives for use with Ceramic, Mosaic and Stone Tiles” Conforms to EN 12004: 2017 and is a normal cementitious adhesive (C1) with slip resistance (T) of class C1T including using with spacer as per manufacturer's instructions, incl Screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:4 with liquid water proofing compound as specified by manufacturer, all as specified and directed.

M&L for Vitrified, non slippery, extra glazed, durable, chemical resistant and highly water resistant tiles for competition swimming pool, any model, design, pattern, size and colour as approved in wall surfaces etc. pointed with epoxy grout matching with the colour of tiles, (grouting with Three Component, High Performance Epoxy Tile Grout, exceeds EN 13888 requirements), tested in accordance with AATCC 30 PART 3, in any position in swimming pool internal / external angles for wall and corners to meet the World Aquatics / FINA criteria, as per approved shade by GE, laid with approved High polymer modified, grey cement- based tile adhesive suitable for fixing medium format tile/stone in walls/floor conforms to IS 15477: 2019 Type 2T "Adhesives for use with Ceramic, Mosaic and Stone Tiles” Conforms to EN 12004: 2017 and is a normal cementitious adhesive (C1) with slip resistance (T) of class C1T including using with spacer as per manufacturer's instructions, incl rendering 10mm thick for backing coat in CM 1:3 with liquid water proofing compound as specified by manufacturer, all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in floor / plinth protection including finished even and smooth without using extra cement.

M&L for dandelion fountain using brass ball and stainless steel branch pipe. 1 inches: branch pipe 30, length About 200mm. 1.5 inches: branch pipe 41, length About 300mm. 2 inches: branch pipe 65,length About 400mm.3 inches: branch pipe 105,length About 600mm with nozzales complete all as specified and directed

Material and labour for Concealed point wiring with single core PVC insulated FRLSH unsheathed 1100 volt grade cable with multistranded copper conductor of size 1.5 Sq mm (Nominal area) drawn through and including non metallic rigid PVC conduit medium duty ISI marked of suitable dia conduit wiring including Tee, Junction boxes and provision of modular terminal boxes and covered with modular cover plate with frame of suitable size including suitable screws with washer for mounting modular switch, modular sockets and modular regulators and drawing continuous earth wire with and including PVC insulated FRLSH unsheathed 1100 Volts grade cable with multi stranded copper conductor of size 1.5 Sq mm (Nominal area) and connected to common earth dolly complete all as specified & as directed for One light point controlled by one, one way Modular switch 5 amps, SP

All as per item No.108 above but for One Ceiling Fan / exhaust fan point controlled by one, one way switch and regulator

All as per item No. 108 above but for One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board .

All as per item No. 108 above but for One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board.

Supply and fixing of Modular Switch , 1 module, 6 Amps capacity 230 volts complete all as specified.

Supply and fixing of Modular socket outlet 6 Amps 2 /3 pin 2 module complete all as specified.

S & F 3 pin, 6 A, 250 V ceiling rose conforming to IS 371: 1999 and having terminal capacity 3 X 1.5 mm² with IK 04 and IP 20 protection complete all as specified in IS 732: 2019 and directed by the engineer-in-charge.

Material and labour for concealed Submain wiring with 2 runs of single core 4 sqmm and 1 run of 4 sqmm earth PVC insulated FRLSH unsheathed multistranded 1100 volts grade with copper conductor drawn through and including non-metalic rigid PVC conduit and conduit accessories of medium grade not less than 25 mm dia including one run of single core 4 sqmm PVC insulated FRLSH unsheathed multistranded 1100 volts grade with copper conductor cable as earth continuty conductor along with the wiring and connected from Panel/DB to DB/main board including removing the existing unserviceable sub main wiring and making good the disturbed surface to match with the existing all as specified and as directed. Note:-Two runs of cable, one run of earth contuinity conductor and one run of conduit shall be measured as one unit length.

Supply and replace MCB double door DB SPN 4 way with 200 Amps busbar including removing the existing unserviceable one and making good the distrubed surface to match with the existing surface.

S & F MCB ('B' curve) 6- 32 A, 230 V, 50 Hz, SP for conforming to IS/IEC 60898-1-2002, having breaking capacity Icn = 10 kA, sliding bottom clamp, colour coded on/off indication on dolly, bi-connect IP 20 protected lower terminals and sliding shutters, etc. with the following rating complete all as specified in IS 732: 2019 and directed by the engineer-in-charge.

S & F MCB ('B' curve) 40 A, 230 V, 50 Hz, SPN for DB Inputconforming to IS/IEC 60898-1-2002, having breaking capacity Icn = 10 kA, sliding bottom clamp, colour coded on/off indication on dolly, bi-connect IP 20 protected lower terminals and sliding shutters, etc. with the following rating complete all as specified in IS 732: 2019 and directed by the engineer-in-charge.

S & F 20 W (Min 110 Lumen/Watt) surface / wall mounted LED batten having PC diffuser, luminous efficacy of minimum 100 lumen/W, CRI > 80, PF > 0.9, CCT 6500K, independent isolated SMPS based constant current electronic LED driver with THD < 20%, surge voltage protection and other safety tests as per IS 15885 (Part-2/Sec-13): 2012, polycarbonate diffuser, housed in powder coated white extruded aluminium channel housing. white coloured ABS end caps, IP 20 protection, input voltage range 140- 270 V, input frequency 50- 60 Hz, including electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed by the engineer-in-charge. Make: Havells/Wipro/ Philips

S & F 35 W security light having high efficiency long life LED module with SMD LED package mounted on MCPCB with high LED efficacy of ≥ 110 lumen/Watt, integral SMPS based constant current electronic LED driver with THD < 20%, surge voltage protection and other safety tests as per IS: 15885 (Part-2/Sec-13): 2012, IP 66 protection, high effiency polycarbonate cover with integrated lens housed in pressure die-cast aluminium alloy heat sink for effective thermal management, sturdiness, excellent corrosion resistance, separate optical and control gear compartment & top opening for easy maintenance, suitable for side entry, wall mounting with bracket arm OD 35 mm to 42 mm including necessary electrical connection to the fixture with 3 core flexible Cu conductor cable of appropriate size and 1.5 m long bracket, having 40 mm diameter light grade GI pipe, including GI clamps, nuts, bolts & washers with two coats of synthetic enemal paint over a coat of red oxide primer complete in all respect as specified and directed by engineer-in-charge. Make PHILIPS/HAVELLS/WIPRO.

Supply and fix exhaust fan, Hard Plastic body AC single phase. 230 V of size 250mm sweep with , blades, and frame and louvers all as specified and directed.

S & F of LED Luminarie 600mmx600mm 35/36 watts, 220 volts AC recessed mounting light fixture type with high efficiency PMMA diffuser soft glare free light complete with driver, holders and LED lamp suitable for roof ceiling including connecting up with driver 3 core flexible copper conductor cases of suitable size complete with lumianrie system efficacy >100 lm/w with IP & surge protection of 10 kV, power factor >0.95 complete with all accessories all as specified and directed by Engg-in-Charge . Make PHILIPS/HAVELLS/WIPRO. ( For False ceiling)

M&L for Refixing/Repair of Switch / Socket / Junction Box Complete / Cover plate any type and capacity makeup with existing surface / wall panel as directed by Engr in Charge

Supply and fixing ceiling fans complete with blades, down rods, Suiatable electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) all as specified and directed