Karnataka

Financial Eval

Works

Buildings

Construction of Transgender Toilet at Civil Judge and JMFC Court Building Premises in Bagepalli Town in Chikkaballapura District

Public Works Department

PWD Division Office Chikkaballapura | Chikkaballapura, Karnataka

Amount: Refer DocsCloses: 28 Apr 2026Closed

Bids

1 Bid28 Apr 2026

#	Company	Amount	Status
1	₹1.9 Laccepted-finance	₹1.9 L	accepted-finance

Tender Value

Refer Docs

EMD Value

₹6,250

Closing Date

28 Apr 2026, 10:20 pmClosed

Tender Inviting Organisation

Name

Public Works Department

Work Description

Construction of Transgender Toilet at Civil Judge and JMFC Court Building Premises in Bagepalli Town in Chikkaballapura District

Tender Information

Tender ID

PWD/2026-27/BD/WORK_INDENT35649

Reference Number

PWD/2026-27/BD/WORK_INDENT35649

Tender Type

Open

Product Category

Buildings

Location

PWD Division Office Chikkaballapura

Source Website

Subscribe to view

Documents Required

7 documents required · 7 mandatory

Technical Bid

RequiredAnnual turnover certificate issued by Chartered accountant with UDIN Number along with balance sheets for past 5 years i.e 2021-22 to 2025-26 if UDIN Not mentioned tender will be rejected

RequiredKPWD CLASS IV And Above Registration

RequiredAssessed available tender capacity

RequiredExisting & Ongoing Commitment Statement

RequiredWork done certificate issued by not below the rank of Executive Engineer

RequiredValid GST Certificate

RequiredBALANCE SHEETS FOR LATS 5 YEARS ALONG WITH PROFIT AND LOSS STATEMENT ELSE TENDER WILL REJECTED

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Department Registration Details.Total value of civil engineering works executed and payments received in the last five years (year-wise).List of existing commitments and ongoing work.List of works for which tenders already submitted.Banker Details.

Conditional tenders will not be accepted. The tenderer shall bear all costs associated with the preparation and submission of his tender, and the employer will in no case be responsible and liable for those costs. The cost of the Tender form shall not be refundable. The employer is not responsible for any delay in accessing kpp Portal. All the formats prescribed in the bid document shall be filled by the tenderer in complete. All scanned documents to be uploaded shall be in original and the Executive Engineer reserves the right to verify the documents before approval. The employer reserves the rights to Reject or accept any or all the tenders without assigning any reasons. The intending contractors are requested to note that they should abide by the detailed instructions and conditions contained in the Standard Tender documents Contractors Should be registered with KPWD as Class-IV& above Contractor and further orders thereon.

In the case of the death of the contractor after executing the agreement / commencement of the work, his legal heir, if is an eligible registered contractor and is willing can execute and compete the work at the accepted tender rates irrespective of the cost of the work. The tenderer should maintain the Road/Bridge/ Culvert/Building works during the defective liability period for 1 years. The successful Tenderer shall deliver to the Employer a Security deposit in any of the forms given in clause 24.1 of ITT for an amount equivalent to 5% of the Contract price plus additional security deposit for unbalanced tenders in accordance with clause 24.3 of ITT and clause 44 of the conditions of contract for all works. Contractor should take all precautions to ensure that no damage is caused to any adjacent structures/utilities above or below the ground and also to the existing canal CD works and other similar structures which have been constructed by other agencies during project execution. If any damage is caused, it has to be rectified at his own risk and cost. Damage to physical property and personal injury and death will be the personal risk of the contractor.

All safety precautions, warning signs, night illumination, reflectors, deployment of security guards has to be ensured so that no untoward incident happens on account of negligence or any project activity. Contractor should indemnify the client to that extent. Formation levels and other data furnished are bare minimum the contractor should make all efforts to validate and to get additional data if required at his own cost. For SC & ST Contractors :- As per G.O.No.FD 876 EXP-12/2017, Bangalore Dt:10-10- 2017 Security Deposit for an amount equivalent to 5% of the Contract price shall be deducted in every running bill. However, in case of 1st & Final bill the entire security deposit will be deducted from the final bill. (If applicable) Further particulars, if any, required by the Contractor can be had from the office of the Executive Engineer, PWD Division, Chickaballapur during office hours on all working days. Materials like bitumen or steel,cement etc., required for the work shall be procured by the tenderer themselves and should got tested by the quality control authority before use on the work at their own cost.

All the items in the tender include all lead, lifts,loading unloading, transportation, labour, hire charges of machinery curing for concrete works, cost and convenience of all materials and all other such incidental charges necessary for successful completion of works as per the detalied technical specification and direction of Engineer - in charge of this work. Contractor should follow strictly the prevailing rules of labour act & the contractor should employ only registered labours as per Govt. Circular No. PWD/198/BMS/2009/ Dated: 24-06-2009, negative tenders for labour portion will be rejected. (If applicable) Royalty on construction materials and other taxes will be deducted as per prevailing Govt. orders. As per Karnataka state Government order LD/300/LET/2006 Bangalore dated 01.01.2007 and Government letter no PW/134/BMS/2007 dated 27.07.2007, a sum amounting to 1% of the bill amount will be deducted towards constructions labour welfare fund. The returns submitted to the I.T. along with the Profit and Loss account statement, Balance sheet should be uploaded for the financial turnover criteria attested by registered Chartered Accountant, along with UDIN else will be treated as invalid.

Participating agencies should compulsorily possess GST and PAN numbers. GST number should be valid and in force at the time of participation. As per Government circular no: FD 355 EXP-12/2024 dtd:01.08.2024, Letter of Intent (LoI) will be issued in Karnataka Public Procurement Portal 2.0 software, contractor has to accept LOI online and submit the BGs through KPP portal within 05days. if not, tender will be rejected as per Guidelines. .Roads shall be maintained for one year.

The tenderer or his identified sub-contractor should possess required valid electrical license for executing building certification works

Technical Criteria

Past Experience

Satisfactorily completed as prime contractor at-least one such similar work of value not less than Rs.1.25Lakhs (50% of estimated cost of tender) (similar work)

Work Done Certificate

List of works for which tenders already submitted

Others -- works for which tenders already submitted

Capabilities of Vendor

Assessed available tender capacity - (AxNx2.5-B) where A -Maximum value of civil engineering works executed in any one year during the last five years (updated to current financial year price level) (FY in which tenders are invited) taking into account the completed as well as works in progress. N - Number of years prescribed for completion of the works for which tenders are invited. B Value, at Current Financial year (FY in which tenders are invited) price level, of existing commitments and on-going works to be completed during the next 01Months. (Period of completion of the works for which tenders are invited)

Others -- OTHERS

KPWD CLASS IV And Above Registration along with electrical license

PWD Registration Certificate (Class I/II/III/IV)

Financial Status

To qualify for award of this contract, each Tenderer in its name should have in the last five years (i.e. 2021-22 TO 2025-26) Achieved in at least two financial years a average financial turnover (in all classes of civil engineering construction works only) of Rs.2.00 Lakhs

Audited CA Certificate of Annual Turnover

Others

Valid GST Certificate

GST Registration

Work Locations

Fee & Financial Details

Tender Fee Amount

₹500

EMD Fee Amount

₹6,250

Important Dates

Last Activity

28 Apr 2026

Published

21 Apr 2026

Bid Opening

29 Apr 2026

Download Ends

27 Apr 2026

BOQ Preview

•

Construction of Transgender Toilet at Civil Judge and JMFC Court Building Premises in Bagepalli Town in Chikkaballapura District

•

Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

•

Providing Size Stone masonry with hard stone in foundation & plinth with

•

Cement mortar 1:6 (1 cement : 6 coarse sand) ---- including the cost and conveyance of all materials, Curing, cost of labour hi...

•

Providing Brick work with common burnt clay modular bricks of clasS designation 3.5 in foundation and plinth in Cement mortar 1:6 (1 cement

•

: 6 coarse sand) including cost of all material...

•

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 ...

•

Newly Constructed bathroom/toilet/balcony/utility with Cementatius waterproof coating - below 300 m2 - Providing and Applying CFTRI approved two component flexible polymer modified acrylic cementitiou...

•

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with ...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating Each depos...

•

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thick- ness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades,...

•

Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t...

•

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fitting...

•

Providing and fixing PTMT grating of approved quality and colour.- Circular type - 100 mm nominal dia ---- including the cost and conveyance of all materials, Curing, cost of labour hire charges of eq...

•

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...

•

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. ---- including the cost and conveyance of all materi...

•

Providing and fixing Towel rail (Circular) made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - class - Premium ---- including the cost and conveyance ...

•

Providing and fixing Bidet spray made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - class - Premium ---- including the cost and conveyance of all mat...

•

Providing and fixing mirror of superior Glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangula...

•

Providing and fixing brass bib cock of approved quality : 15 mm nominal bore ---- including the cost and conveyance of all materials, Curing, cost of labour hire charges of equipment and machinery, al...

•

Providing and fixing brass stop cock of approved quality : 15 mm nominal bore ---- including the cost and conveyance of all materials, Curing, cost of labour hire charges of equipment and machinery, a...

•

Providing and fixing PTMT pillar cock of approved quality and colour: 15 mm nominal bore, 107 mm long, weighing not less than 110 g ---- including the cost and conveyance of all materials, Curing, cos...

•

Providing and fixing unplasticised PVC connection pipe with brass unions : 30 cm length - 15 mm nominal bore ---- including the cost and conveyance of all materials, Curing, cost of labour hire charge...

•

Providing and fixing Bib cock Two way with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - class - Premium ---- including the cost and...

•

Providing and fixing 600x120x5 mm Glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws,...

•

Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

•

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the...

•

Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elasto...

•

Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprisi...

•

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Su...

•

Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of app...

•

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even an...

•

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, ...

•

Supplying heavy gauge PVC conduit pipe . mm dia.mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The cond...

•

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/ C.C wall ...

•

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

•

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

•

Supplying exhaust fan of 1440 RPM of 300mm (12")size with racket blades complete for light duty suitable to operate on 230V50Hz, AC Supply ---- including the cost and conveyance of all materials, Curi...

•

Supplying of .feet -PVC Batten with integrated LED tube . W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V@ 50/60Hz & Power fact...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

KW1 B D JMFC toilets Bagepalli.doc

Tender Document • 1.47 MB

Ready to Participate?

Download all tender documents and submit your bid