REPAIR REPLACE STEEL WINDOW VENTILATOR AND HACKING OUT BROKEN WINDOW GLASS FOR REPLACE WITH ACRYLIC SHEET INCL ATTEND DAY TO DAY EMERGENT COMPLAINT OF PLUMBING, CARPENTRY, JOINERY OF MD ACCN DSTV SOUTH AND NORTH IN AOR OF AGE BR I UNDER GE HISAR

Amount

Dismantling boarding, any description, fixed in any position with nails all as directed.

Taking down shutters of any description not exc. 1 Sqm each all as directed..

Taking down shutters of any description exc 1 Sqm and not exc. 2 Sqm each all as directed..

Taking down chowkat or frame with shutters area not exc 1.5 Sqm each (without taking off the shutters from the frame) including cutting holes for hold fasts & making good complete all as specified.

Taking down chowkat or frame with shutters area exc 1.5 Sqm but not exc 4 Sqm each (without taking off the shutters from the frame) including cutting holes for hold fasts & making good complete all as specified.

S & F factory made 35mm thick flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both sides with and including 1mm thick plain colour PVC sheet fixed or laid on around the all side surface of flush doors by using rubber based adhesive as per specification complete all as specified and directed.

Supply and fixing factory made 35mm thick glazed and skeleton shutters made of second class hard wood, open rebated and prepared to receive glass, gauze etc (with sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in clause 8.24 of Section 8 in SSR Part-I, kiln seasoned and chemically pressure treated, fixed to chowkat, complete all as specified & directed.

S&F factory made Solid PVC door frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet instead of plain colour PVC sheet and edges will be painted to match with prelam sheet reinforced with M S square tubes, fixed in opening as per specification & drawing given in SSR Part-II .

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded Single Side Prelam PVC 'C' channel instead of Plain colour PVC sheet 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and single prelam PVC sheets used instead of plain colour PVC sheet for top rail, lock rail & bottom rail on either side having one side feathered edge and on other side 10mm 90 degree bent edgle & as gap insert for top rail & bottom rail; Panelling of single side prelam colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing of SSR Part-I complete all as specified and directed.

S&F in repairs mild steel framed work as in steel frames, chowkats, doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing, rungs for ladder & like conforming to Grade E-165 (Fe 290), complete, all as specified & directed.

S&F butt hinges of size 100mm medium weight, stainless steel ISI marked complete all as specified.

S&F butt hinges of size 125mm medium weight, stainless steel ISI marked complete all as specified.

S&F 150mm long extruded aluminium alloy handles, fabricated type, anodised (ISI marked) complete all as specified.

S&F 200mm long aluminium anodized barrel tower bolts of extruded section (ISI marked) complete all as specified.

S&F mild steel helical door spring 300mm ordinary rat tail rod pattern spring including roller and roller plate complete all as specified.

S&F 100mm long aluminium anodized floor door stopper double legged with rubber shoe, fixed to bottom rail of door as directed.

S&F 250mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified.

S&F in repair 0.56mm thick plain, Aluminium sheeting, Alloy 31000 H4 as in sheet lining to wooden door fixed with brass CP screws of suitable size all as directed.

S&F in repair / replacement 35-40mm thick Plywood, grade BWR, type BB, fixed with nails to wooden / steel frame work as used in any type of repair work to wooden shelf / shutter complete all as specified and directed.

S&F 18/19mm thick Block boards, grade 2 quality, interior grade, decorative type with decorative face veneer on one face fixed with screws to timber or iron frame work including suitable size PVC fillets to cover the front edge of board and suitable size of wooden cleats fixed as in cupboard shelves complete all as specified and as directed.

S&F cupboards/wardrobes, factory made, frame shall be of 1.25mm thick pressed steel with PBI sheet of size 90x70mm, shutter shall made out of 1mm thick pressed steel with 06 Nos 100mm long 3.15mm thick steel hinges, standard pattern rim lock with complete locking arrangement including 12mm vertical rod shall be provided (brass mortice lock, vertical type, size 65mm, 2 levers, ISI marked with escutcheon plate and two keys) with & including two coats of spray painting with synthetic enamel paint of approved tint over a coat of red oxide primer including fixing with minimum 6 Nos 12mm dia mild steel bolt 150 mm long grouted in brick wall/concrete including making good the disturbed surfaces as original with CM (1:4) or PCC (1:2:4) type B0 complete all as specified and as directed. Note :- The measurement shall be taken of front elevation and not girthwise.

S&F Steel ventilator with top hung shutter including box type hinges, fixed type handle and steel peg stay, complete including one shop coat of Zinc Chromate primer complete all as specified.

S&F in repairs stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified.

S&F in repairs 3mm thick sheet glass ordinary quality and glazing with oil putty or fixed with beads in square/rectangular not exc 0.5 sqm in each pane and fixed with putty or beads complete including hacking out old broken glass (any thickness, size, quality or description) from any type of window / door glazed with putty or fixed with beads complete all as specified and directed.

S&F 4mm thick figured glass pin head type and glazing with oil putty or fixed with beads in square/rectangular exc 0.5 sqm in each pane fixed and fixed with putty or beads complete all as specified and directed.

S&F in repairs 4mm thick figured glass pin head type and glazing with oil putty or fixed with beads in square/rectangular exc 0.5 sqm in each pane fixed and fixed with putty or beads including hacking out old broken glass (any thickness, size, quality or description) from any type of window / door glazed with putty or fixed with beads complete all as specified and directed.

S&F in repairs/replacement 3mm thick acrylic transparent sheet, in square/rectangular not exc 0.5 sqm in each pane fixed / lock with window frame by using PVC snap beading with necessary self tapping reviting / screwing and suitable method with and including hacking out old broken glass (any thickness, size, quality or description) from any type of window / door glazed with putty or fixed with beads complete all as specified and directed.

S&F in repairs mild steel box type hinge (02 Nos) of size 50mm and 100mm long mild steel handle (left / right) fixed with nut & bolt, screws and washers including suitable hold fast & peg stay suitable for factory made steel windows / ventilators including necessary cutting, welding and blacksmith work for re-alignment of window shutter along the window frame for smooth functioning for closing & opening of shutter with and including taking down shutter and re-fixing the same in position with window/ventilator frame complete all as specified and directed.

S&F in repairs butt hinges of size 125mm medium weight, cold rolled mild steel including taking down shutter and re-fixing the same in position with door frame including necessary cutting, welding to existing steel door frame and necessary carpentry work for proper functioning of wooden door shutter complete all as specified.

S&F in repairs butt hinges of size 150mm heavy weight, cold rolled mild steel including taking down iron shutter of garages and re-fixing the same in position with iron door frame including necessary cutting, welding to existing steel door frame and necessary blacksmith work for proper functioning of iron door shutter complete all as specified.

M&L for preparation of new surfaces of wood or wood based materials of any description over 10 cm width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of pink primer complete all as specified.

M&L for preparation of new steel and iron surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of red oxide primer complete all as specified.

M&L for preparation of new steel surfaces (already applied with coat of primer) of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint of approved tint on existing primer complete all as specified.

S&F in repair brass tap spindle of suitable size for brass CP bib tap / angle cock / pillar tap of 15mm bore of any type complete all as specified and directed

S&F in repair long brass spindle of suitable size for concealed stop cock of 15mm bore of any type complete all as specified and directed

S&F in repairs Bib taps,cast copper alloy with crutch or butterfly handle, chromium plated, fancy type , screwed for iron pipe or for brass ferrule, for 15 mm bore GI pipe complete all as specified and directed.

S&F in repairs angle valve, cast copper alloy, chromium plated, fancy type, screwed for iron pipe or for brass ferrule, for 15 mm bore GI pipe complete all as specified and directed.complete.

S&F in repairs 15mm bore fancy type pillar tap, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks & fly nuts, screwed for iron pipes.& fly nuts, screwed for iron pipes all as specified and directed.

S&F in repairs PVC valveless symphonic action type low level flushing cistern (ISI marked) of 10 litre capacity including 32 mm dia PVC flush pipe connected to water closet with inlet, ball valve, float and handle complete all as specified.

S&F in repairs complete set of flush kit of required shape & size suitable for 10 litre capacity PVC flushing cistern complete all as specified.

S&F in repairs PVC connection 600 mm long suitable for 15 mm bore GI pipe including PTMT nuts on both sides complete all as specified.

S&F in repairs PVC connection 450 mm long suitable for 15 mm bore GI pipe including PTMT nuts on both sides complete all as specified.

S&F in repairs vitreous china wash down water closet (Padestal pattern) White, with 'P' or 'S' trap including plastic water closet seat cover, black, closed pattern with flat bottom with mild steel chromium plated or aluminium hinging device and fixing with all joints including connection to drain or outgoing pipe and to flushing pipe, anti-syphonage pipe etc complete all as specified and as directed.

S&F in repairs vitreous china squatting pan (Orissa pattern) water closet (white) of size 580x440mm with integral foot rests, with PTMT trap of suitable size 'P' or 'S' , including connection to trap and flushing pipe, antisyphonage pipe etc including provision of PCC (1:5:10) type E2 in filling, making good to floor, complete all as specified.

S&F in repairs vitreous china wash hand basin, white, flat back of size 550mm x 400mm with & including a pair of cast iron brackets duly painted with two coats of synthetic enamel paint over a coat of red oxide primer embedded in PCC 1:3:6 type C1 blocks of size 10x7.5x15cm, 32 mm dia PVC waste pipe 90cm long, and 32mm bore PTMT waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, (excluding tap, waste chain & plug), complete all as specified.

S&F in repairs Peg set of 06, steep chromium plated complete all as specified and as directed.

S&F in repairs PVC flexible waste pipe 32mm dia and 90cm long including adopter complete all as specified and as directed.

S&F in repairs PVC flexible waste pipe 40mm dia and 90cm long including adopter complete all as specified and as directed.

S&F in repairs PVC flush bend 32mm dia suitable for connecting PVC low level flsuhing cistern to any type WC complete all as specified.

Cleaning and removing all scale and dirt, etc, from tanks exc 250 litres and not exc 500 litres and from mouths of circulating pipes, etc. complete all as specified and directed.

Disconnecting existing tanks, of capacity exc 250 ltrs and not exc 500 ltrs, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and directed. Note :- Leakage of PVC water tanks shall be repaired with silicon gel, M-seal, and other suitable method as directed by Engineer-in-charge and cost thereof shall deemed included in quoted rates.

Dismantling old unserviceable PVC water tank capacity exc 250 ltr and not exc 500 ltrs & removal from site etc complete all as specified and directed.

Supply and fixing 500 Litre capacity Rotational moulded polyethylene water storage tanks (colour other than black as approved by Engineer-in-charge) triple layered (cylindrical vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete as specified in SSR Part-I.

S&F Ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe 20mm bore (minimum weight 210 gms) complete all as specified and as directed.

S&F in repairs Ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe 20mm bore (minimum weight 210 gms) complete all as specified and as directed.

S&F in repairs PVC lid cover for 500 litre capacity PVC water tanks with opening and locking arrangement complete all as specified and as directed.

Shiva Constructin Co.

NAVIN KUMAR

m/s Rajesh Kumar