SPL REPAIR TO OPS ROOM BLDG NO TO 861 AT HQ AVN BDE CAMP UNDER GE 865 EWS LEH

M&L for 15mm thick wooden battens of 100mm wide fixed each other with male and female grooves fixed with screws to timber frame work as in wall panelling, shelves including dismantlng existing unserviceable wooden battens, complete all as specified and as directed by Engr-in-Charge.

M&L for 15mm thick wooden battens of 100mm wide fixed each other with male and female grooves fixed with screws to timber frame work as in ceiling including dismantlng existing unserviceable wooden battens, complete all as specified and as directed by Engr-in-Charge.

M&L for french polishing on wood or wood based surface of any width or girth or any description, including cleaning and preparing the surface including a coat of wood filler on new surface with two or more coats, complete all as specified and as directed by Engr-in-Charge.

M&L for 6mm (5 ply) thick veneered decorative (Knoty Pine) plywood, grade 1 (with BWR resin) with decorative face veneers on one face, fixed with nails to timber frame work as in walls, including dismantlng existing unserviceable plywood, complete all as specified and as directed by Engr-in-Charge.

M&L for 6mm (5 ply) thick veneered decorative (Knoty Pine) plywood, grade 1 (with BWR resin) with decorative face veneers on one face, fixed with nails to timber frame work as in ceiling, including dismantlng existing unserviceable plywood, complete all as specified and as directed by Engr-in-Charge.

M&L for 2nd class soft wood clean sawn as in battens for grids of ceiling & lining fixed with nails exc 13 sqcm and n exc 25 sqcm in section including dismantlng, complete all as specified and as directed by Engr-in-Charge.

M&L for 2nd class soft wood clean sawn as in beeding for edges of Ceiling ,lining ,or wooden flooring work fixed with nails exc 6 sqcm and n exc 13 sqcm in section including dismantlng, complete all as specified and as directed by Engr-in-Charge.

M&L for covered fillets of standard hard board not less than 6mm thick and up to 40mm wide and fixing with screws including dismantlng, complete all as specified and as directed by Engr-in-Charge.

M&L for hard wood 2nd class factory made wooden boarded floors 10mm thick and skirtings planed one side & edges tonged and grooved or rebated , including backing with thermocol sheets and as specified by manufacture, including dismantlng existing unserviceable wooden flooring, complete all as specified and as directed by Engr-in-Charge.

Taking down chowkats / frames with shutters (without taking off shutters from the frames) area n'exc 1.5 Sqm each, complete all as specified and as directed by Engr-in-Charge.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) area exceeding 1.5 Sqm and not exceeding 4 Sqm each, complete all as specified and as directed by Engr-in-Charge.

S&F anodised aluminium frames for door, windows, ventilators with one or more rebates including joining cleat for fixinf etc, complete all as specified and as directed by Engr-in-Charge.

S&F Anodised aluminium door shutters, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading screws etc., complete all as specified and as directed by Engr-in-Charge.

S&F Anodised aluminium window and ventilator shutters,including aluminium jali fixed in one side, side hung type without sash,aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading screws, anodised aluminium fittings such as peg stays 150mm long (1 Nos) hinges type B-21 100mm long (2 Nos) suitable handle (1 Nos) etc, complete all as specified and as directed by Engr-in-Charge.

S&F factory made aluminium 50 micron powder coated grill, opening size 101.6 X 63.5 mm (4"X2½") and of approx weight @ 1.345 Kg/sq.m complete fixed in position in windows in all respect, complete all as specified and as directed by Engr-in-Charge.

S&F in 250mm long aluminium alloy, anodized, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded section or cast aluminium alloy fixed , complete all as specified and as directed by Engr-in-Charge.

S&F in repair aluminium door closer (aluminium extruded section) hydraulically regulated designation No 3, universe type, suitable for door shutte of 851 mm to 1000 in width and of weight 61 to 80 kg, complete all as specified and as directed by Engr-in-Charge.

S & F floor door stopper 150mm long of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed, complete all as specified and as directed by Engr-in-Charge.

Hacking out old broken glass (any thick ness, size, quality or description) from wooden panes or stone, concrete or brick surrounds, glazed with oil putty or fixed with beads, complete all as specified and as directed by Engr-in-Charge.

M&L sheet glass 3mm thick ordinalry quality and glazing with oil putty or wooden beads in square not exc 0.50 sqm in each pane , complete all as specified and as directed by Engr-in-Charge.

M&L sheet glass 5.5mm thick ordinalry quality and glazing with oil putty or wooden beads in square exc 0.50 sqm in each pane, complete all as specified and as directed by Engr-in-Charge.

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) confirming to Fe-410 Gde 250 quality A including distance pieces, cleats etc, including dismantling wrought iron or mild steel work of any description, complete all as specified and as directed by Engr-in-Charge.

S&F Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mps as in roof covering /cladding to wall fixed with self tapping screws, including dismantlng existing unserviceable steel sheets, complete all as specified and as directed by Engr-in-Charge.

S&F Pre painted galvalumealuminium zinc coating GI based Plain steel sheet 0.50mm thick as in ridges , valley gutters drip etc of an colour having tensile strength of 550 Mps as in roof covering /cladding to wall fixed with self tapping screws, including dismantlng existing unserviceable steel sheets, complete all as specified and as directed by Engr-in-Charge.

M&L preparation of new untreated steel surfaces exc. 10 cm width/girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and as directed by Engr-in-Charge.

S & F in repairs sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, Waste pipe including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm, complete all as specified and as directed by Engr-in-Charge.

S & F in in repairs 40mm waste coupling of PTMT for sink and wash hand basin (Half or full threaded ) (Minimum Weight 45 grams), complete all as specified and as directed by Engr-in-Charge.

S&F rotational moulded polyethylene water storage tank (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I of capacity 500 litres including all accessories, including dismantlng existing unserviceable water tank, complete all as specified and as directed by Engr-in-Charge.

S & F 25mm dia 3 layer PP-R polypropyene random copolymer concealed pipes SDR 7.4 (PN 16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete all as per manufacture instructions, including taking up or down 25mm bore steel tubing and connections, complete all as specified and as directed by Engr-in-Charge.

S & F 32mm dia 3 layer PP-R polypropyene random copolymer concealed pipes SDR 7.4 (PN 16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete all as per manufacture instructions, including taking up or down 32mm bore steel tubing and connections, complete all as specified and as directed by Engr-in-Charge.

S&F PVC connectons 15 size with PTMT nuts (length 600mm), complete all as specified and as directed by Engr-in-Charge.

Supply & Fixing sheet glass basin shelf assembly consisting of 8mm thick glass shelf 600 x 150mm wide with bevelled edges/hatching of edges fixed with stainless steel 'D' bracket fixed and railing, complete all as specified and as directed by Engr-in-Charge.

S&F Soap dish, any type, fixed to plugs with chromium plated brass screws, complete all as specified and as directed by Engr-in-Charge.

S&F in repair towel rod CP 60 cm long between flanges and including all accessories like brackets/screws etc as recommended by manufacturer, complete all as specified and as directed by Engr-in-Charge.

M&L PVC (SWR) 75 mm dia floor trap with plain with grating including jointing with solvent cement , complete all as specified and as directed by Engr-in-Charge.

S&F grating doom 75mm dia of PTMT (min weight 25gms), complete all as specified and as directed by Engr-in-Charge.

S & F in repair One Piece EWC of size 700 x 380 x 770 mm with built in Cistern Vitreous china wash down water closet (Pedestal), white (EWC) including Plastic seat of same colour of WC, closed patttern with flat bottom, and cover and Mild steel chromium plated hinging device fixed in repair connection to drain pipe and to flushing pipe antisyphonage pipe etc including PVC fitting P or S trap for 100mm bore of pipe fixed, complete all as specified and as directed by Engr-in-Charge.

S & F in repairs health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25m long flexible tube and ABS wall hook including making connections and fixed in position, complete all as specified and as directed by Engr-in-Charge.

S & F in repair toilet paper holder with flat recessed type stainless steel fixed with screws, complete all as specified and as directed by Engr-in-Charge.

S & F in repair Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe), complete all as specified and as directed by Engr-in-Charge.

S&F in repair 15mm bore CP central hole basin mixer without Popup waste system with 450mm long copper pipes chrome finish, complete all as specified and as directed by Engr-in-Charge.

S&F in repair CP wall mixer 3-in-1 system with provision for bath Telephone shower and over head shower with bend pipe, complete all as specified and as directed by Engr-in-Charge.

S & F in repair fancy type glass corner self with CP brackets etc, complete all as specified and as directed by Engr-in-Charge.

S & F Chrominum plated brass soap dish (Oval shape) to walls (size not less than 125mm long), complete all as specified and as directed by Engr-in-Charge.

M&L for 25 mm thick PCC 1:2:4 type B1 using 20mm graded stone aggregate as in sub base of floor, including demolition of existing PCC, complete all as specified and as directed by Engr-in-Charge.

M & L for Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including 15 mm thick screed bed in cement mortar 1:4 screed bed or bedding layer of mortar, including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and as directed by Engr-in-Charge.

S&F in repairs 15mm dia Angle stop valves, fancy type chromium plated with lonk shank and cup cast copper alloy (concealed type), screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipes, complete all as specified and as directed by Engr-in-Charge.

Taking down carefully copper/aluminium point wiring (light, fan, socket and power point) complete fittings such as switches, ceiling rose, regulators, socket etc and removing material from site and making good disturbed surfaces of walls, floors/ceiling to match the existing surface, complete all as specified and as directed by Engr-in-Charge.

Point wiring with 1.5Sq.mm nominal area of FRLS copper conductor multi stranded PVC insulated and unsheathed 1100 volts cable drawn through & including PVC Casing & caping with standard accessories such as elbows, tees, junctions etc. and PVC moulded terminal box with top cover & frame including PVC insulated unsheathed solid 1.5Sqmm copper conductor cable as continuous earth lead, complete all as specified and as directed by Engr-in-Charge, for the followings:-

One light point/fan controlled by one way switch complete all as specidied and/or directed by Engr-in-Charge.

One 3 pin socket outlet 5 Amps, 230 volts point on independent board complete all as specidied and/or directed by Engr-in-Charge.

One 3 pin socket outlet 5 Amps, 230 volts point on Same board complete all as specidied and/or directed by Engr-in-Charge.

All as item No 50 above, but using FRLS cables 4 Sq mm size.

S&F modular switch 1 way 6 amps 1 module, complete all as specified and as directed by Engr-in-Charge.

Suppy and fix in replacement modular socket outlet 2/3 pin 6 Amps combined 2 module, complete all as specified and as directed by Engr-in-Charge.

Supply and fix in replacement modular bell push 2 module, complete all as specified and as directed by Engr-in-Charge.

Suuply and fix in repair modulalr switch 2 way 10 Amps 1 module, complete all as specified and as directed by Engr-in-Charge.

Supply and fix in replacement of door Bells electric Ding- dong/ musical type single phase 230Volts, complete all as specified and as directed by Engr-in-Charge.

Suppy and fix modular socket 6A/16 A-2/3 pin combined 2 module, complete all as specified and as directed by Engr-in-Charge.

Suppy and fix modular switch 1 way 16 amps 1 module, complete all as specified and as directed by Engr-in-Charge.

Supply and fix in replacement of lamp holder PVC/Poly corbonate type insulated body with back plate suitable for batten fittings, complete all as specified and as directed by Engr-in-Charge.

S&F ceiling rose surface bakelite 65x50 mm two to three terminals, complete all as specified and as directed by Engr-in-Charge.

Supply and fixing in replacement LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC surface/recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size, complete all as specified and as directed by Engr-in-Charge.

Supply and fix in replacement of inverter LED bulb B-22 cap with opal diffuser, IP20 and inbuilt battery back up of 10 Watt capacity, complete all as specified and as directed by Engr-in-Charge.

Supply and fix exhaust fan in replacemen, steel body AC single Phase. 230V of size 250 mm sweep with blades, frame and louvers including connectioning with flexible three core cable from the ceiling rose, complete all as specified and as directed by Engr-in-Charge. Note :- Old u/s exhaust fan retrieved from site to be deposited to MES store.

M & L for submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/recessed as required in PVC casing Caping wire size 2x10.0 sq. mm + 1x10.0 sq. mm earth wire, complete all as specified and as directed by Engr-in-Charge.

Supply, install, testing complete water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 Litre, BEE 5 star rated complete with all accessories such as safety valve, thermostate, NRV, connection pipes etc. complete all as specified and as directed by Engineer-in-Charge. Note :- Old u/s water heater retrieved from site to be deposited to MES store.

Supply and fix in replacement of sheet metal enclosure for DBs double door when MCB's to be used single pole & neutral 240 Volts 12 Ways, complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in replacement of sheet metal enclosure for DBs double door when MCB's to be used single pole & neutral 240 Volts 08 Ways, complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in replacement of MCB SPN 63 Amp 240 Volts AC ISI marked, complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in replacement of MCB SP 6-32 Amps 'C' curve 240 Volts 50 HZ, complete all as specified and as directed by Engineer-in-Charge.

Taking down old unsrerviceable DB and supply and fix sheet metal enclosure for DBs double door when MCB's to be used triple pole and neutral 415 Volts 04 Ways, complete all as specified and as directed by Engineer-in-Charge.

Taking down old unserviceable MCB and supply and fixing 415V 10KA 'B' curve miniature circuit breaker TPN MCB of 100 Amps capacity in the DB, complete all as specified and as directed by Engineer-in-Charge.

M & L for earthing complete with Galvanized Steel earth plate electrode 60cm x 60cm x 6mm thick, buried directly in ground (earth pit not less than 2.25 M deep below ground level) with top edge of the plate not less than 1.5 M below normal ground level, connected to and including GI iron strip of size 32x6 mm flat by means of GI bolts, nuts, and washers, protected by 40mm bore Gl light grade ISI marked pipe upto and including test points. Earthing plate shall be surrounded by alternate layers 15cm thick of charcoal or coke and common salt all around bottom and top, 20mm dia Gl medium grade pipe for watering and including funnel, wire mesh, PCC chamber pit made with PCC (1:3:6) type C2 (using 20mm graded crushed store aggrgate) including necessary form work, excavation and earth work in any type of soil, returning filling in and disposal of surplus soil to a distance not exceed ing 50 M, pit cover 40 mm thick made with RCC (1:2:4) type B-1 (using 20mm graded crushed store aggrgate) including TMT reinforcement 80 mm dia @ 75 mm C/C both way, MS handle of 12 mm dia, cover rest on MS angle iron frame 40x40x6mm embeded in concrete duly painted with two coats of synthetic enamel paint over a coat of red oxide primer, complete all as as shown in electrical plate No-3 of SSR Part-l, complete all as specified and as directed by Engr-in-Charge.

Supply, laying and testing of XLPE insulated, armoured, haeavy duty electric cables with stranded aluminium conductor rating 1100 volts grade of size 50. Sqmm 3.5 core laid in trences or passing through pipes.ducts or fixed to walls/poles, including taking down old unserviceable cable, complete all as specified and as directed by Engineer-in-Charge. Note:- Exacavation and earth work shall be measured and paid saparately under respective items.

Excavation in trenches not exceeding 1.5m in wide and not exceeding 1.5 m in depth for laying of pipe etc and getting out in ant type of soil, complete all as specified and as directed by Engineer-in-Charge.

M&L for Sand cushioning to underground cables 8 cm below the cable before laying & 15 cm above the cable after laying, complete all as specified in clause 19.75 of SSR Par-I, complete all as specified and as directed by Engineer-in-Charge. Note : Punned thickness shall be measured and paid for.

Supply and laying of factory made, machine pressed, unreinforced, pre-cast concrete cable cover class LV type-1 flate size 250mm x 150mm x 40mm, complete all as specified and as directed by Engineer-in-Charge.

Labour only for laying of old serviceable cable covers retrieved from excavation, complete all as specified and as directed by Engineer-in-Charge.

M & L for returning, filling in including spreading leveling watering and well ramming in layers not exc. 25 cm thick, complete all as specified and as directed by Engineer-in-Charge.

M & L for removing surplus soil to a distance not exc. 50 M and depositing where directed at a level not exceeding 1.5 m above the starting point, complete all as specified and as directed by Engineer-in-Charge.

Deduct Schedule of Credit of Rs (-) 38588.00 (Minus) as listed in Schedule 'A' (Contd). Contract Sum shall be arrived after deducting the credit amount. Note :- Tenderers will not quote against this item being a firm amount.

Please Enable Macros to View BoQ information