R M of LWSS Shimla Town SH Repair of pipe line Chaur Maidan Bailunganj road Mall road Sub Division

Amount

Excavation in foundation, trenches etc., in earth work in all type of soil such as pick work, jumper work, blasting work Kankar, moorum shingles including decomposed soft and hard rock i/c cutting of top of metelled road etc, upto all heights stacking the excavated earth not more than 3 meters clear from the edge of excavation and then returing the stacked soil in 15cm. layers, when required into plinth and sides of foundation etc., consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth up to all leads and lifts etc., complete in all respect and as per the direction of Engineer-in-Charge.

Dismantling black top surface for laying pipes and relaying the same (earthwork excavation to be measured and paid separately)including all leads and lifts complete in all respects and as per direction of Engineer -in-Charge.

Dismantling of Sluice Valve 150mm & 200mm dia

P/F Lead Joint 250mm dia CI Pipe

Providing and Laying ,Jointing and testing 250mm dia MS pipe thickness 5.2mm thickness (earth work in trenches to be measured and paid separately) including all leads and lifts complete in all respects and as per direction of Engineer -in-Charge.

Providing and fixing of ISI marked sluice valves conforming to IS 14846 latest with upto date amendments of Kirloskar/Gled/Leader/Kartar/KSB/VAG make for nominal pressure PN 1.6. The valve should be of rising stem type, supplied without hand wheels but with caps. The materials for different Table 1 of 15 14646. The valves shall be installed at existing water lines by cutting existing lines welding suitable size making flanges and spool/ tail pieces etc. as per site conditions in all respects as per site conditions in all respects as per directions by Engineer-in-Charge. (200 mm dia)

Providing and fixing of ISI marked sluice valves conforming to IS 14846 latest with upto date amendments of Kirloskar/Gled/Leader/Kartar/KSB/VAG make for nominal pressure PN 1.6. The valve should be of rising stem type, supplied without hand wheels but with caps. The materials for different Table 1 of 15 14646. The valves shall be installed at existing water lines by cutting existing lines welding suitable size making flanges and spool/ tail pieces etc. as per site conditions in all respects as per site conditions in all respects as per directions by Engineer-in-Charge. (150 mm dia)

Providing, welding and fixing of MS flanges at suitable reaches, conforming to Table - 28 (Latest with upto ate amendments) and welding of MS flanges with G.I. Pipes/ MSERW pipes in two layers on both faces to make the joint leak proof (The cost of providing and laying of G.I. Pipes/MSERW Pipes to be measured and paid for separately). The welding of flanges should conform to IS 816 - 1969 with electrode as per IS : 814 - 1991 and required number of nuts & bolts conforming to IS : 1364. The thickness of gasket not less than 3.00 mm conforming to IS : 2712 - 1998. The work shall be done as per entire satisfaction of Enginner- in-Charge within all leads and lifts. (200mm dia)

Providing &Fixing Insertion of rubber CI Flanged spigot (Heavy class) including all leads and lifts complete in all respects as per direction by Engineer-in-Charge.(150mm dia)

Providing &Fixing Daed Flanged (Heavy class) including all leads and lifts complete in all respects as per direction by Engineer-in-Charge.(150mm dia)

Providing &Fixing Insertion of rubber CI Flanged socket (Heavy class) including all leads and lifts complete in all respects as per direction by Engineer-in-Charge.(250mm dia)

Providing & Fixing Making Connection including all leads and lifts complete in all respects as per direction by Engineer-in-Charge.

Hire charges for Diesel Genertor set for cutting of pipe with all leads and lift complete in all respect.

Hire charge for pick up vehicle for Diesel Genertor set with all leads and lifts complete in all respect.

SOHAN SINGH

surinder thakur

Munish Jain