Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹25.4 LAccepted-AOC 29 7 KACHERI ROAD NEAR DISTRICT HOSPITAL PRATAPGARH PRATAPGARH UTTAR PRADESH 230001 | PRATAPGARH | UTTAR PRADESH | 230001 | L-1 | Accepted-AOC FOUND LOWEST AND REASONABLE | |
| 2 | L-2₹31.0 L+₹5.6 L (22.1%)Rejected-Finance | L-2 | Rejected-Finance Being other than lowest | |
| 3 | L-3₹36.3 L+₹10.9 L (42.8%)Rejected-Finance NAGLA UDHA NEAR PRIMARY SCHOOL POST DHANOLI AGRA UP AGRA 282010 | AGRA | AGRA | UP | 282010 | L-3 | Rejected-Finance Being other than lowest |
Tender Value
₹27.5 L
EMD Value
₹55,000
Closing Date
23 Nov 2020, 6:00 pmClosed
GE (AF) TECH AREA AGRA
GE (AF) TECH AREA AGRA
PETTY/ESSENTIAL REPAIRS TO WATER SUPPLY SYSTEM AT 4 AREA AND MAP UNDER GE (AF) TECH AREA, AGRA
2020_MES_390405_1
8200/1263/E8
Open Tender
Civil Works - Water Works
Item Rate
180 days
GE (AF) TECH AREA AGRA
AS PER NIT AND TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE (AF) TECH AREA AGRA
₹55,000
Yes
19 Dec 2020
29 Oct 2020
25 Nov 2020
29 Oct 2020
23 Nov 2020
9 Nov 2020
29 Oct 2020 - 4 Nov 2020
Amount
Taking up/down GI tubing/HDPE/ polyethylene aluminium polyethylene (PE-AL-PE) pressure pipe including fitting from trenches, walls, ceilings for relaying/ renewal for the following sizes complete all as specified and directed :-
(a) 100 mm bore
(b) 80 mm bore
(c) 50mm bore
(d) 40 mm bore
(e) 25 mm bore
(f) 20 mm bore
(g) 15 mm bore
Laying only in trenches after cleaning water tubing & connections with steel water tubing/Cast Iron pipe /HDPE/ polyethylene aluminium polyethylene (PE-AL-PE) pressure pipe fitting as retrieved from item No 1 here-in-before after cleaning, washing or removing old screw thread as required & providing new fittings, as required, complete all as specified and directed for the following sizes :-
(a) 15 mm bore
(b) 20 mm bore
(c) 25 mm bore
(d) 40 mm bore
(e) 50 mm bore
(f) 80mm bore
(g) 100mm bore
Laying only, after cleaning water tubing & connections with steel water tubing/Cast Iron pipe/HDPE/ polyethylene aluminium polyethylene (PE-AL-PE) pressure pipe fittings as retrieved from item No 1 here-in-before, fixed to wall, ceiling or laid in floor after cleaning, washing or removing old screw thread as required & providing new fittings, wherever required, complete all as specified and directed for the following sizes :-
(a) 15 mm bore
(b) 20 mm bore
(c) 25 mm bore
(d) 40 mm bore
(e) 50 mm bore
(f) 80mm bore
(g) 100mm bore
Supply, laying, testing in renewal GI tubing medium grade in trenches including required GI fitting complete all as specified and directed for the following bore :-
(a) 100 mm bore
(b) 80 mm bore
(c) 50 mm bore
(d) 40 mm bore
(e) 25 mm bore
(f) 20 mm bore
(g) 15 mm bore
Supply, fixing, testing in renewal GI tubing medium grade on walls/ceiling or laid in floor including GI fitting complete all as specified and directed for the following bore :-
(a) 25 mm bore
(b) 20 mm bore
(c) 15 mm bore
M&L for cutting of existing HDPE/ GI pipe of 40/50mm bore for cleaning/ leakage repairing and re-jointing the same in existing position with & including jointing rings and heating process including all necessary excavation & earth work if required and making good the surfaces as per existing complete all as specified and directed.
M&L for cutting of existing HDPE/ GI pipe of 25mm bore for cleaning/ leakage repairing and re-jointing the same in existing position with & including jointing rings and heating process including all necessary excavation & earth work if required and making good the surfaces as per existing complete all as specified and directed.
M&L for cutting of existing polyethylene aluminium polyethylene (PE-AL-PE) pressure/ GI pipe of 12-16mm and 20-25mm dia for cleaning/ leakage repairing and re-jointing the same in existing position with & including jointing rings and heating process including all necessary excavation & earth work if required and making good the surfaces as per existing complete all as specified and directed.
S&F in repairs HDPE fittings i.e reducer/ tee/ ring suitable for HDPE/ polyethylene aluminium polyethylene (PE-AL-PE) pressure pipe for stoppage of leakage at different locations/ areas including all necessary excavation & earth work if required and making good the surfaces as per existing complete all as specified and directed for the following sizes:-
(a) HDPE Tee 50x 50 X 16-20 mm bore
(b) HDPE tee of 16-20x16-20x12-16mm dia
(c ) HDPE tee of 20-25x20-25x16-20mm dia
(d) Jointing/ copper rings of 20/25mm dia
M&L in renewal for drilling & tapping cast iron mains in position for branch connection of 20mm bore GI pipe with MS clamps complete all as specified and directed.
Supply & fixing in renewal gun metal globe gate valve with iron wheel head, screwed both ends ISI mark for the following sizes complete all as specified and directed :-
(a) 50mm bore
(b) 40 mm bore
(c) 25 mm bore
(d) 20 mm bore
(e) 15 mm bore
S&F in renewal bib tap 15mm bore standard of PTMT any colour screwed for iron pipe and fixed complete all as specified and directed (Make –Prayag/Symet).
S&F in renewal ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe suitable for 20mm dia pipe complete all as specified and directed.
M&L in renewal for lead joints including spun yarn & taking out old lead by burning etc for the following bore of CI pipe /fittings complete all as specified and directed :- Note: earth work measured and paid seperately under respective items.
(a) 300 mm bore
(b) 200 mm bore
(c ) 150 mm bore
(d) 100 mm bore
(e) 80 mm bore
S&F in renewal GI fitting medium grade i.e socket including necessary excavation & earth work, rethreading of pipe for stoppage of leakage in different site locations/Areas and making good as per existing surface for the following bore of pipe complete all as specified and directed :-
(a) 50 mm bore
(b) 40 mm bore
(c ) 25mm bore
(d) 20 mm bore
(e) 15 mm bore
S&F in renewal GI fitting medium grade i.e union including necessary excavation & earth work, rethreading of pipe for stoppage of leakage in different site locations/Areas and making good as per existing surface for the following bore of pipe complete all as specified and directed:-
(a) 50 mm bore
(b) 40 mm bore
(c ) 25mm bore
(d) 20 mm bore
(e) 15 mm bore
S&F in renewal GI fitting medium grade i.e Tee etc including necessary excavation & earth work, rethreading of pipe for stoppage of leakage in different site locations/Areas and making good as per existing surface for the following bore of pipe complete all as specified and directed :-
(a) 50 mm bore
(b) 40 mm bore
(c ) 25mm bore
(d) 20 mm bore
(e) 15 mm bore
S&F in renewal GI fitting medium grade i.e elbow etc including necessary excavation & earth work, rethreading of pipe for stoppage of leakage in different site locations/Areas and making good as per existing surface for the following bore of pipe complete all as specified and directed:-
(a) 50 mm bore
(b) 40 mm bore
(c ) 25mm bore
(d) 20 mm bore
(e) 15 mm bore
Opening, cleaning & refitting water meter/float valve/stop cock including renewal of rubber washer etc for 15 to 25 mm bore complete all as specified and directed.
Dismantling, opening head of sluice valve, taking out wedge nut/spindle with nut/wedge for repairing/renewal and refixing after repairing/renewal of nut/spindle etc for the following size of sluice valve including nuts, bolts, washer, rubber packing and gland complete all as specified and directed. NOTE :- New parts renewed against unserviceable parts shall be measured and paid under respective items.
(a) 300 mm bore
(b) 150 mm bore
(c) 100 mm bore
Supply only stainless steel spindle of standard size as per IS for any model/make of sluice valve for the following sizes complete all as specified and directed:-
(a) 300 mm bore
(b) 150 mm bore
(c) 100 mm bore
Supply only GM wedge nut for sluice valve of following size complete all as specified and directed:-
(a) 300 mm bore
(b) 150 mm bore
(c) 100 mm bore
Supply only in renewal CI gland cover with nuts, bolts & washers including filling of gland packing etc for the following sizes of sluice valve complete all as specified and directed:-
(a) 300 mm bore
(b) 150 mm bore
(c) 100 mm bore
Supply & fixing in renewal of cast iron body sluice valve ISI marked PN 1.0 and conforming to IS 14846 with stainless steel spindle of following sizes complete all as specified and directed:-
(a) 300 mm bore
(b) 200 mm bore
(c ) 150 mm bore
(d) 100 mm bore
(e) 80 mm bore
M&L in renewal for ‘D’ joints complete with collars, rubber ring, nuts & bolts etc for following bore complete all as specified and directed:-
(a) 300 mm bore
(b) 200 mm bore
(c) 150 mm bore
(d) 100 mm bore
(e) 80mm bore
(f) 50 mm bore
Supply & fixing in renewal of non return valve ISI marked including complete fixing acceseries of following sizes complete all as specified and directed:-
(a) 150 mm bore
(b) 100 mm bore
(c) 80 mm bore
Supply,lowering and testing in renewal 32 mm dia high density polythylene column pipe in bore well ISI marked pressure rating PN-10 and 32 mm dia , jointing material with HDPE fitting including taking down old U/S HDPE pipe complete all as specified and directed. Make- Ashirvad/Triputy/Atul.
Supply & laying in renewal PVC insulated and PVC sheathed copper conductor cable 2.5 Sqmm, 3 core flat for 1100 volts AC including connecting with submersible motor to starter panel complete all as specified and directed.(Make –Finolex/Plaza/Havells)
Taking out submersible pumping set of 1.5/2.0 HP and lowering after repair with renewal of bushes, sleeves, shaft, PVC impeller and rewinding of motor including testing complete all as specified and directed.
Supply and fixing in renewal wall mounted cubical type panel board with locking arrangement, suitable for comprising of starter, condenser, volt meter, indicator lamp, Amp meter, MCB/cut out of suitable capacity for 1.5/2 HP single phase submersible pumping set including fixing arrangement complete all as specified and directed. (Make : KSB/L&T/Kirloskar/Crompton).
Supply & fixing in renewal MS pipe 100 mm bore, centrifugally casted class -B both end flanged in any length fixed on swimming pool/over head reservoir with fittings (elbo/bend etc)complete all as specified and directed.
Supply & fixing in renewal MS pipe 80 mm bore, centrifugally casted class -B both end flanged in any length fixed on swimming pool/over head reservoir with fittings (elbo/bend etc)complete all as specified and directed
Demolition of PCC/Black bitumen road of any description and in any position not otherwise specially provided for complete all as specified and directed.
M&L PCC (1:2:4) type B2 (using 40mm graded stone aggregate) as in surface chanells and drains complete all as specified and directed
M&L for cement concrete in foundation, filling and mass concrete 1:4:8 type D2 , (using 40mm graded stone agregrate) complete all as specified and directed.
Demolition and M&L for Brick work with subclass `B` bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed.
M&L for rendering 10mm thick on fair faces of brick work or concrete surface with using CM 1:6 finished even and smooth without using extra cement complete all as specified and directed.
M&L for MS sheet cover including angle iron frame with handle of MS round/square bar including two coat of synthetic enamelled paint over one coat of red oxide primer complete for valve pit chamber in FE 410-W grade-E-250 quality A complete all as specified and directed.
M&L for cutting of sapling with their roots, vegetation of any type & height etc girth not exceeding 30 CM up to 5 Mtr around the pump house periphary of the pump house and surrounding area of OHT/UG sumps of all installation under GE Tech Area and making the area neat and clean by removing/throwing the rubbish to a distance not exc. 50 mtr complete all as specified and directed.
Excavation in trenches in soft/loose soil n. exc 1.5 Mtr wide and not exc. 1.5 M deep and getting out including forming bottom surface for laying of pipes complete all as specified and directed.
Returning filling in including spreading, leveling, watering and well ramming in layers not exc 25 mm thick complete all as specified and directed.
Removal of excavated material to a distance not exc 50 Meter and depositing where directed at a level not exc 1.5 M above the starting point complete all as specified and directed.
M&L in renewal for Cutting of cast iron pipe in position for insertion of new tee, coller etc for the following bore complete all as specified and directed. Note : Item required for connection etc will be measured & paid separately under respective item of sch A.
M & L in renewal for flange joints with rubber sheet 3mm thick, including nuts, bolts etc for the following bore complete all as specified and directed.:-
Supply, fixing, jointing & testing in renewal cast iron fittings such as bends (any types radius and angle) tappers, collers, tee , Y junction, plugs, caps and connecting pieces or any other special required at site for the flanged/spigot and socketed pipes complete all as specified and directed.
Taking down of CI/DI pipe line of 200 mm bore including excavation & earth work complete all as specified and directed.
Relaying of CI/DI pipe obtained from item No 46 at other location complete all as specified and directed. Note:- Earth work shall be measured and paid seperately.
Supplying & laying in renewal ductile iron pipe class K-09 in any length spigot and sockets and suitable for tyton joints of size 200 mm dia complete all as specified and directed.
Taking out U/S submersible pump set including motor from bore well of capacity 1.5HP after disconnecting all electrical connections & supply, fixing, lowering, commissioning & testing in renewal including wiring from motor to panel of new submersible pump set of discharge capacity 70 LPM at 57 metre head single phase , 230 volt AC electric driven 2900 RPM of 1.5 HP complete all as specified and directed. Make : Kirloskar /KSB/Crompton Greeves. Note:- Old submersible pump including panel shall be deposited in MES store yard and taken on charge by Deptt.
M&L in renewal for making of computerised colour printed layout plan and brief details i.e history of installation/ machinery of various installations on and including 1.0mm thick plastic laminated acrylic sheet of size 1500x1200mm fixed to new hard boards with & including PVC beading of suitable size fixed to all edges of board with & including mild steel screws of suitable size complete all as specified and directed. Note:- Details i.e layout plan and brief details shall be provided by Engineer-in-Charge separately during execution.
S&F in repairs 80mm bore cast iron foot valve, flanged type with flanged, ISI marked, including making flanged joints with & including 3mm thick rubber sheet, nuts & bolts etc of suitable size complete all as specified and directed.
S&F in repairs 100mm bore cast iron foot valve, flanged type with flanged, ISI marked, including making flanged joints with & including 3mm thick rubber sheet, nuts & bolts etc of suitable size complete all as specified and directed.
Taking out submersible pump set including motor of capacity up to 15 HP with column pipe from bore well after disconnecting all electrical connections and lowering the same after necessary repair/ renewal of wornout/ damaged parts of pumps/ motors/ pipe joints including transportation to work shop and back after repair and making all electrical connections and testing on completion complete all specified and directed. Note:- Repair/ renewal of wornout/ damaged parts of pumps/ motors/ pipe joints shall be measured and separaterly under respective items of Sch 'A'.
Dismantling/opening of submersible pump of capacity 10.0/15.0HP for complete servicing with materials including cleaning & reassembling the same and testing on completion complete with renewal of the following items/parts:-
(a) renewal of GM bushes & sleeves of pump of existing size & make complete.
(b) renewal of SS coupling with key of existing size & make complete.
Dismantling/opening of submersible motor of capacity 10.0/15.0HP for complete servicing with materials including cleaning & reassembling the same and testing on completion complete with renewal of the following items/parts complete all as specified and directed.:-
(a) Rewinding with & including PVC insulated copper winding wire of same gauge & quantity and sealing the winding by using sealing compound including cutting and taking out existing burnt winding complete.
(b) renewal of thrust plate and bushes of existing size & make complete.
Taking out monoblock pump set including motor of capacity 10/ 12.5HP from foundation after disconnecting all electrical connections and refixing the same on foundation after necessary repair/ renewal of wornout/ damaged parts of pumps/ motors including making all electrical connections and testing on completion complete all specified and directed. Note:- Repair/ renewal of wornout/ damaged parts of pumps/ motors shall be measured and paid separaterly under respective items of Sch 'A'.
Dismantling/opening of monoblock pump including induction motor of capacity 10.0/ 12.5HP for complete servicing with materials including cleaning & reassembling the same and testing on completion complete with renewal of the following items/parts complete all as specified and directed.:-
(a) M&L for rewinding of motor with & including super enamelled copper winding wire of existing gauge & No of turns, re-insulating, two coats varnishing & heating including cutting and taking out existing burnt winding complete.
(b) renewal of bearings of motor & pump of existing size & make complete.
(c) renewal of GM bushes of pump of existing size & make complete.
(d) Rematling of shafts of pump complete.
Supply and laying or fixing or passing in well/ borewell in renewal, 1100 volts grade heavy duty, PVC insulated and PVC sheathed mutistranded copper conductor submersible cable of size 6.0sqmm 3 core flat including connection to submersible motor/ starter panel with & including necessary jointing materials if required and testing on completion complete all as specified and direced. Make :- Havells/ Plaza/Grandlay
Supply and laying or fixing or passing in well/ borewell in renewal, 1100 volts grade heavy duty, PVC insulated and PVC sheathed mutistranded copper conductor submersible cable of size 10.0sqmm 3 core flat including connection to submersible motor/ starter panel with & including necessary jointing materials if required and testing on completion complete all as specified and direced. Make :- Havells/ Plaza/Grandlay
S&F in repair MCCB four pole AC 415 volts, 50 Hz, fixed thermal & fixed magnetic setting type of capacity 63 Amps having breaking capacity 16 kA complete all as specified and directed. Make:- Legrand/ L&T/ Schenider
S&F in repair MCCB four pole AC 415 volts, 50 Hz, fixed thermal & fixed magnetic setting type of capacity 100 Amps having breaking capacity25 kA complete all as specified and directed. Make:- Legrand/ L&T/ Schenider
S&F in repair MCCB four pole AC 415 volts, 50 Hz, fixed thermal & fixed magnetic setting type of capacity 125 Amps having breaking capacity25 kA complete all as specified and directed. Make:- Legrand/ L&T/ Schenider
S&F in repair 80 mm bore MS column pipe,medium grade ISI marked 3 m long including heavy duty MS flanged at both ends,nuts,bolts,washers & 3 mm thick rubber sheet etc complete all as specified and directed.
S&F in repair Offload change over switch with sheet metal enclosure & side handle of capacity 100 Amps, 415 Volts,4 pole including fixing on wall/panel,connecting with existing cable etc complete all as specified and directed. Make- C&S/Havells/ABB
S&F in repair Offload change over switch with sheet metal enclosure & side handle of capacity 200 Amps, 415 Volts,4 pole including fixing on wall/panel,connecting with existing cable etc complete all as specified and directed. Make- C&S/Havells/ABB
S&F in repair R Y B phase LED type indicating lamp, suitable for 220Volts AC complete all as specified and directed. Make- C&S or equivalent in Havells/ABB
M & L for construction of brick masonary valve pit with using sub-class 'B' bricks built in cement mortar (1:6), of size (90 x 90 x 90) cm (internal dimension) with one brick walling and 150 cm x150 cm x 10 cm base foundation with PCC (1:3:6), type C2 (using 40 mm graded stone aggregate) with cement plastering 10 mm thick with cement mortar (1:4) on internal & exposed surfaces, including MS cover of size 01mtr x 01mtr made out from 3 mm thick MS sheet including angle iron framing on MS cover with using angle iron of size 40x40x5 mm as well as on top wall of the valve pit & painting of the steel surfaces with two coats of synthetic enamel paint (first quality) over a coat of red oxide primer, including necessary earth work & demolition of the existing old valve, complete all as specified and as directed.
S&F in repair 3 phase Dual Meter- analog type (0-20Amp,120 Amp suppressed & 0-500V) of size 96x96 mm complete all as specified and directed. Make- C&S or eqv. In Havells/ABB/Rishabh
S&F in repairs MU-G20H fully automatic star- delta starter of relay range 28-42 Amps of capacity suitable for and upto 20.0 HP motor, AC-3 duty, 415 volts, 50 Hz, three phase including fixing arrangement complete all as specified and directed. Make : L&T or equivalent make of Havells/ Crompton Graves/C&S
S&F MCCB 4 Pole Thermal adjustable breaker and adjustable Magnetic type complete all as specified and directed of following capacity
(a) 250 AMP, 36 KA
(b) 400 AMP, 36 KA
S&F in renewal 70 watt LED, energy saving, enevironment friendly, long life exclusive innovating dia cast aluminium IP-66 protection, flood light suitable for highway lighting and general purpose including fixing arrangement and fixed on Overhead tank`s pillar complete all as specified and directed. Make- Havells or equivalent in Bajaj/Crompton Greaves
M&L for earthing complete with galvansided steel earth plate electrode of size 600 x 600 x 6.0mm thick directly burried in the ground (Earth pit not less than 2.25 m deep below ground level) with top edge of earth plate not less than 1.50M below the ground level, connected to GI strip of size 32x6mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel, 40mm bore GI pipe medium grade including necessary fittings for protection of earthing strip, watering pipe 20mm bore GI medium grade, concrete chamber in PCC (1:4:8) type D-2 using 40 mm graded stone aggregate, coping shall be in PCC (1:3:6) type C-1 using 20 mm graded stone aggregate and internal surfaces of concrete chamber shall be finished with 12mm thick plaster in CM (1:4), funnel with wire gauge of 22 gauge (0.63 mm) 8 mesh per linear incl 50mm thick cover of RCC (1:2:4) type B-1 using 20mm grade stone aggregate reinforced with 8mm MS deformed bar @ 75 mm C/C both ways, char coal dust and common salt all as shown in electrical plate No. 3 of SSR Part-I (2009) including all necessary excavation & earth work and removal of surplus soil to a distance n. exc 50M and providing connection points with MS bolts & washers as required and connection from earth test point to earth electrode with same GI strip alongwith protection pipe (upto max distance of 7.5 mtr is included in unit rate) complete all as specified and directed.
Taking up 150 mm bore cast iron water mains (including all fittings) with spigot and socket ends and lead joints from trenches/ floors including burning out joints and recovering lead including removal from site complete all as specified and directed.
Taking up 100 mm bore cast iron water mains (including all fittings) with spigot and socket ends and lead joints from trenches/ floors including burning out joints and recovering lead including removal from site complete all as specified and directed.
Relaying of CI/DI pipe size 150mm bore as obtained for item no 74 in trenches including cleaning of pipe line complete all as specified and directed.
Relaying of CI/DI pipe size 100mm bore as obtained for item no 75 in trenches including cleaning of pipe line complete all as specified and directed.
M&L for DI pipes ISI marked of make as specified with spigot and socket ends suitable for tyton joints, centrifugally cast, class K-9, in any length coforming to IS: 8329(2000) as per latest amendments, laid in trenches with & including making rubber gasket joints (Tyton joint) and testing on completion complete all as specified and directed for the following sizes:-
(a) 150 mm bore
(b) 100mm bore
Carryout day to day rectification of water supply complaint such as repair, reconnection and renewal of water supply system complete all as specified and directed.
Note: (a) 01 x Pipe fitter and 02 x helper will be detailed by the contractor for attending above complaints on daily basis. Cost of which shall be deemed to be included in quoted rates. (b) renewal of major items shall be measured and paid under relevant items of this schedule. (c) Pipe fitter and helper so detailed by the contractor will report to MES complaint cell at 0845 hrs morning to receive complaint slip from department and complaints shall be rectified within 08 Hours. If contractor fails to detail above tradesmen a panel recovery@ Rs. 500.00 per day shall be made to contractor and shall be recovered from RAR/ Final bill. (d) Repairing upto 06 Complaints at different water supply system without any other material will be considered as one job.
M/s S.M. Construction
MUKTA AND COMPANY
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .