REPAIR TO JOINERY, FLOORING, BLOCK MASONRY AND PLASTERING, SANITARY FITTING, ROOF SHEETING (Temp Bldg) at AF Station Carnicobar

Amount

Taking down chowkats or frames with shutters (without taking off shutters from the frame) exc 1.5 sqm but not exc 4 sqm each complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) not exc 1.5 sqm each complete all as specified and as directed.

Taking down and refixing same opening shutter exc.1 sqm and not exc 2 sqm each.

Taking down shutters of any description exc 1 sqm but not exc 2 sqm each complete all as specified and as directed.

S&F second class hard wood plain, straight chowkhats and frames, wrought, framed rebated on the solid rounded or chamfered, put together with glue pinned at joints all as directed

M&L for providing cement concrete type B1 1:2:4 (using 20mm graded stone aggregate) as in bed blocks of holdfast, complete all as specified and as directed.

S&F aluminium frames for doors, windows, ventilators with one or more rebates including joining joining cleats for fixing etc complete all as specified and as directed.

S&F anodised aluminium door shutter, aluminium section weighing 0.55 kg/m including necessary joining cleat, glazing clips, rubber neoprene packing, handle 2 Nos in doors, hinges, anodised aluminium snap beading etc complete all as specified and as directed.

S&F anodised aluminium window and ventilator shutter, side hung type type without sash bars, aluminium section weighing 0.55 kg/m including necessary joining cleat, glazing clips, rubber neoprene packing, anodised aluminium snap beading, scews anodised aluminium fittings such as peg stay 150mm long (01 No), hinges type B-21 100mm long (02 No) suitable handle (01 No) complete all as specified and as directed.

S&F 30 mm thick flush shutters solid core construction with block board core and plywood face panels.complete all as specified and as directed.

S&F 35mm thick second class hard wood plain framed panelled shutters (any no of panels), with panel of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veeners complete all as specified and as directed.

S&F 35mm thick second class hard wood, glazed and skeleton shutters , open redated and prepared to receive glass, gauze etc (with shash bar), edges of framing plain, champered or rounded fitted with cut and mitred beads for securing glas etc size of member of shutters as specified in SSR Part - I

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube as per specification and drawing complete all as specified and as directed.

S&F solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rail. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with a solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either sides and as gap inserts for top and bottom rail panneling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles and rails with suitable PVC sheet beading, and jointed together with solvent cement as per specification and drawing complete all as specified and as directed.

M&L butt hinges 100mm, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type B-21.

M&L extruded aluminium alloy handles 150mm, fabricatede type anodised complete all as specified and as directed.

S&F extruded aluminium alloy handle 100 mm size fabricated type, anodised complete all as specified and as directed.

S&F aluminium alloy, anodised, sliding door bolt of length 300mm with hasp, staple (bolt type) and fixing clip of sheets, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and as directed.

S&F aluminium anodised barrel tower bolt of length 150mm of extruded section complete all as specified and as directed.

S&F aluminium alloy wire cloth 0.45mm nominal dia of wire and average width of operature 1.40mm and fixed with aluminium wire staples

S&F in repairs aluminium alloy wire cloth 0.45mm nominal dia of wire and average width of operature 1.40mm and fixed with aluminium wire staples

S&F aluminium anodised "Deco" grill, DG 102, 100 x 10 mm x 7 mm thick, approved design for windows/ventilators with F/U channel complete all as specified and directed (Note : F/U channel will be measured and paid seperately)

M&L for preparation of new or previously untreated wood surfaces of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint (ordinary tint) over a coat of pink primer complete all as specified and as directed

S&F aluminium (Die cast body) Door closer hydraulically regulated, designation No 2, universal type, suitable for door shutters 701 to 850mm in width and of weight between 36 ro 60 Kg complete all as specified and as directed

S&F in repairs aluminium (Die cast body) Door closer hydraulically regulated, designation No 2, universal type, suitable for door shutters 701 to 850mm in width and of weight between 36 ro 60 Kg complete all as specified and as directed

S&F 100mm size stainless steel in built mortice lock 4 leavers for aluminium shutter complete all as specified and as directed

S&F300mm, Mild steel ordinary rat tail rod pattern springs including roller and roller plate fixed to door, complete all as specified and directed.

M&L for prelaminated particle board 12mm thick interior grade, prlaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws in aluminium works complete all as specified and as directed

S&F frosted glass 5.5mm thick ordinary quality and glazing with oil and putty in square not exc 0.5 sqm in each pane complete all as specified and as directed.

Hacking out glass old broken (any thickness, quality or description) from wooden frames, stone brick, concrete. Surrounding glazed with oil putty or fixed with beads complete all as specified.

S&F glass 5.5mm thick ordinary quality and glazing with oil and putty in square not exc 0.5 sqm in each pane complete all as specified and as directed.

S&F sheet glass 3mm thick, ordinary quality and glazing with oil putty in squares not ecx 0.5 sqm each complete all as specified and as directed

S&F solar control flim 50 micron reflective type sticked to glass panes as per instructions of manufacturer's complete all as specified and as directed

S&F IInd class hardwood beads, straight (any size) for glazed or gauzed joinery, renewed, including mitres etc.. and removing old beads to store complete all as specified and as directed.

S&F 2nd class hard wood weather boarding clean sawn, thickness 20 to 25mm and redated on thick edge to give 20mm lap as in eaves board,complete all as specified and as directed.

S&F double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium allloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and as directed.

S&F Decorative/Fency type certain rods brackets of Aluminium/brass alloy suitable for 20mm dia aluminium alloys decorative certain rod/pipe.(AS per sample kept in GE's Office)

S&F Decorative/Fency type curtain rods of Aluminium/brass alloy suitable of 19mm dia. (AS per sample kept in GE's Office)

Dismantling timber fillets, rails, posts, rafters, purlins, etc. under 40 Sqcm in section complete all as specified and as directed.

S&F second class hardwood plain fillets square, rectangular, or triangular in section, (sectional area exc 13 sqcm but not exc 25 sqcm) clean sawn, secured with nails or brads complete all as specified and as directed.

Dismantling walls and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/ slabs / blankets any thickness including cover fillets complete all as specified and as directed.

S&F anodised aluminium snap grid frame (with minimum 15 micron uniform anodic coating) size of 605mm x 605mm consisting of Tee/Angle section, size 40 x 40 x 2mm as approved make confirming to IS-733 in frame of false ceiling including aluminium cleat with necessary CP brass/stainless steel shunk screws. Aluminium perimeter angles fixed to wall/wooden frame at centre to centre and fixing frames to level adjusting anchors 8mm dia GI wire with hook in Tee members at 1.5m centre to centre fixed to steel trussed roof complete all as specified and as directed.

S&F 4mm thick Non Asbestos boards, ordinary type and fixed to timber/aluminium frame work with screw/nail complete all as specified and as directed.

Taking down cement plaster on brick or stone wall etc including racking out joints hacking for key scrubbing down with water complete all as specified and as directed.

Rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces of wall finished even and smooth (without using extra cement) complete all as specified and as directed.

Rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces of wall finished even and smooth (without using extra cement) complete all as specified and as directed.

M&L for preparation of new surfaces of wall and applying two coat of oil bound distempering over one coat of primer including chalk whiting complete all as specified and as directed.

M&L for preparation of new plastered surface of wall and applying two coats of antifungal acrylic emulsion paint over a coat of acrylic emulsion primer complete all as specified and as directed

Taking down eaves gutters and rain water pipes (any size or pattern) including all fittings, heads, shoes,bends,swan-necks, etc.including cleaning or re-fixing or removal to store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed

S&F 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall .complete all as specified and as directed.

S&F Stainless steel coat peg set of five with suitable SS base plate complete all as specified and as directed.

Demolition of PCC in ground floors and paving not exc 15cm thickness (below or above ground level)

Taking up or down steel water tubing and connection 15 mm dia complete all as specified and as directed.

Taking up or down steel water tubing and connection 20 mm dia complete all as specified and as directed.

S&F steel tubes, medium grade 15mm bore galvanised with all fittings and fixed complete to walls and ceiling or laid in floors

S&F steel tubes, medium grade 20mm bore galvanised with all fittings and fixed complete to walls and ceiling or laid in floors

Refixing 15 mm old steel tubing and connections in new or old position (walls,ceiling,floors, etc.)complete all as specified and as directed.

Refixing 20mm old steel tubing and connections in new or old position (walls,ceiling,floors, etc.)complete all as specified and as directed.

S&F in repair vitreous china squatting 'Orisa' pattern, size 580mm x 440mm white with integral foot rest (excluding flushing cistern and flush pipe) complete trap, connection to drain, flushing pipe, complete all as specified and directed

S&F in repair European type WC (Pedestal pattern) complete including pedestal pan and trap including connection to drain, flushing pipe, seat cover (excluding fixing bolt, flushing cistern complete all as specified and directed

Supply only PVC 10 ltr flushing cistern valveless, syphonic action type, low level, white ,with inlet, ball valve, float and handle including brackets complete all as specified and directed.

S&F in repair Flush pipe of polyethylene of low or high density or PVC 32 mm dia, for low level cistern

S&F in repair Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed.

S&F in repair Vitreous China wash basin, white, flat back, size 630x450mm excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and directed.

S&F concealed angle cock 15mm bore, fancy type, chromium plated, with long shank and cup (concealed type) screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or unions and fixed complete all as specified and as directed

Supply only CP fancy type pillar taps suitable for 15mm dia pipe, cast copper alloy, with capstan heads,screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and directed.

Supply ,fix in repair CP fancy type pillar taps suitable for 15mm dia pipe, cast copper alloy, with capstan heads,screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and directed.

S&F in repair CP fancy type stop valves suitable for 15mm dia pipe, cast copper alloy, screwed down,high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S&F in repairs CP shower roses 125mm with or without swivel joints including fixing to steel pipe or union complete all as specified and as directed complete all as specified and as directed.

S&F in repair CP fancy type bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

S&F in repair PVC Connections 15mm size 600mm long with PTMT nuts complete all as specified and as directed.

S&F in repair Waste coupling 32mm bore for wash hand basin cast copper alloy complete all as specified and as directed.

S&F in repair PVC waste pipe 32mm dia 90cm long for WHB complete all as specified and as directed.

S&F in repair PVC waste pipe 32mm dia with 40mm dia reducer, 90cm long for urinal outlet with 4 Nos screws for fixing pipes complete all as specified and as directed.

S&F in repair SS grating 110mm dia with waste pipe hole complete all as specified and as directed.

S&F in repair SS grating 75mm dia with waste pipe hole complete all as specified and as directed.

S&F in repair SS grating 110mm dia without waste pipe hole complete all as specified and as directed.

S&F in repair SS grating 75mm dia without waste pipe hole complete all as specified and as directed.

S&F in repair SS soap dish (fancy type) approximated size 160 x 160 x 90 mm complete as specified and directed.

S&F in repairs, towel rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 190 gms)

Demolition of brick work / stone boulder / PCC block masonary, built in cement mortar or cement lime mortar including all quoins, arches pillars, etc but excluding ashlar facing, dressed stone works, precast concrete articles and precast concrete block wallings complete all as specified and as directed.

M&L for providing precast cement concrete 1:3:6 block masonary with solid blocks, exc 10cm in width and setting in cement mortar 1:6 complete all as specified and as directed.

Dismantling floor, wall hearth or tilling including cement mortar bedding but not backing, removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

S&F non skid coloured ceramic tiles 7 to 8 mm thick, area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm screed bed in CM 1:6 complete all as specified and as directed.

S&F coloured glazed ceramic tiles of size 350 x 250 x 7/450x350x7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match including rendering 10mm thick in cement plaster in cement mortar 1:4 complete all as specified and as directed.

M&L Vetrified Ceramic tiles 10mm thick light shade (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match, light shade, incl 15 mm thick screed bed in CM (1:6) complete all as specifeid and directed.

S&F cast iron floor trap 75mm outlet dia with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise specifically provided for complete all as specified and as directed.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings

S&F prepainted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength 550 MPA as in roof covering in roof covering incudingl ridge fixed with self tapping screws / L type or J type hook as specified.

All as per Ser Item No 91 above but as in ridge/flashing board of width or girth not less than 610mm.

All as per item No 91 above but fixing only. Note : Coloured Pre-coated/Pre-painted, Galvalume aluminiumitems shall be reused as obtained serviceable from item No 90 complete all as specified and as directed.

M&L for MS work as in Wind Tie in roof and MS structural works in trusses,etc with screwed ends including nuts,washers and mild steel plates for walls chimneys,roofs Fe 410-0 or Fe 310-0 complete all as specified .arches etc any kind rods and straining bolts complete all as specified & directed

M&L for preparation of new or previously untreated surfaces of steel and iron of any description over 10cm in width or girth not other wise described and applying two coat of synthetic eamel paint over a coat of red oxide primer (ordinary tint) complete all as specified and as directed

S&F in repair 15mm bib tap standard of PTMT any colour fancy type long body high pressure screwed for iron pipe and fixed (minimum weight 15 mm- 105 gms) etc complete all as specified and directed.

S&F in rep 15mm Pillar tap standard of PTMT any colour fancy type long body high pressure screwed for iron pipe and fixed (minimum weight 15 mm- 105 gms) etc complete all as specified and directed.

Dismantling timber scantlings 40 sq.cm and over in section in any position complete all as specified and as directed.

S&F steel work in tabular truss including special shaped washer etc complete using ERW or induction butt welded tubes confirming to IS-1161-1979 of grade St-240 complete all as specified and as directed.

M&L for cement concrete 75 mm thick 1:3:6 type C-2 (40mm graded aggregate) and finishing the surface even & smooth without using extra cement as in flooring complete all as specified and directed

kakolil trade agencies

M/s Gurunath Construction

M/s Ramesh Lal