SPL REPAIR TO BLDG NO CC 99 UNDER GE AWC MHOW

Amount

Dismanling floor,hearth or wall tiling including cement mortar bedding (but not backing),removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

M & L for non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exc 0.11 sqm , in floors etc.set jointed in neat cement sluury and pointed in white or coloured cement to match over & incl 15 mm thick screed bed built in CM 1:6 all as specified and directed

M & L for joint free non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exc 0.18 sqm , in floors etc.set jointed in neat cement sluury and pointed in white or coloured cement to match over & incl 15 mm thick screed bed built in CM 1:6 all as specified and directed

Description same as per Item No. 03.00 but in vertical surface including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M&L vitrified ceramic tiles light shade 09 to 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm screed bed in cement mortar 1:6 complete all as specified and directed

Description same as per Item No. 05.00 but in vertical surface including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M&L glazed ceramic coloured tiles, 300mmx200mm x 7 mm thick on vertical surfaces such as dados , skirting and risers to steps etc. set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick backing coat to receiving to wall tiles in Cement mortar 1:4 complete all as specified and directed.

M&L for glazed ceramic coloured tiles on vertical surfaces 450x350x7 mm / 450x300x7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick backing coat to receiving to wall tiles in Cement mortar 1:4 complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and directed

M&L Granite 20 mm thick(of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking plateforms and like including pointing in white cement(1:2) using marble dust with admixture of pigment to match with shade of granite over & incl 20 mm thick screed bed built in CM 1:4 all as specified

M&L Rounding to edges of stone slabs one edges, such as in steps, cooking platform, and other similar situations for bullnosing / moulding to exposed edges( any type) and polishing to match the adjoining surfaces complete all as specified & directed.

Roughning of surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc.complete all as specified and directed

M&L brushing neat cement slurry with 3.0kg of cement per sqm complete all as specified and directed

M & L 20 - 25 mm thick machine cut Kota stone slab in flooring or treads of steps over and including 20mm thick screed bed in cement mortar 1:4, laid and jointed with grey cement slurry mixed with pigment to match with shade of slab including rubbing complete all as specified and as directed. Note:- The size of Kota stone slab shall not less than 550 mm x 550 mm cut size, except the location where the balance portion remain less than size as specified above.

Description same as per Item No. 14.00 but as in riser of steps, skirting, dado and vertical surfaces including 10 mm thick rendering in CM 1:4, complete all as specified and directed.

M & L for cement concrete 1:4:8 type D-2 (40 mm graded aggregate) in sub base/ mass concrete complete all as specified and directed.

M & L chequred cement concrete tile 20 cm x 20 cm x 25 mm thick, set, jointed and pointed in neat cement slurry as in floor with grey cement and pigment over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

Demolition cement concrete (unreinfoced) of any description and in any position complete all as specified and directed.

M&L 75mm thick PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in plinth protection or similar places, surface finished even and fair without using extra cement complete all as specified and directed.

M & L PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in cills, steps, seismic and other similar bands, plinth courses, string courses, parapets and railing upto 60 cm in height, coping, kneelers, apex stones bed plates, etc and the like including weathering, slightly rounded or chamfered angles and throating, as directed including necessary use and waste of form work complete.

M&L fly ash brick work with modular brick straight or curved on plan exc. 6 m mean radius built in cement mortar 1:6 including demolition of brick work built in cement mortar complete all as specified and directed.

M & L Plastering 15 mm thick in two layers of 10 mm thick in bottom and 5 mm thick with WPC of top layer in Cement Mortar 1:4 on brick wall/cement block wall or concrete surfaces, surfaces finished even and smooth without using extra cement incl taking down of cement plaster any description on brick or stone wall, complete all as specified and as directed. Note:- WPC will be measured and paid separately

Supply only liquid water proofing compound all as specified and directed

M & L rendering 10 mm thick on brick wall/cement block wall or concrete surfaces in cement mortar 1:6, surfaces finished even and smooth without using extra cement incl taking down of cement plaster any description on brick or stone wall, complete all as specified and as directed.

M & L 10 mm thick rendering in cement mortar 1:3 on concrete surfaces as in ceiling surface finish even and smooth without using extra cement incl taking down of cement plaster any description complete all as specified and directed..

M & L Dubbing out average 10 mm thick on irregular/ demolished surface of walls, concrete surface like cantiliver beam , chajjas, lintles, balconies etc in Cement plaster 1: 4 complete all as specified and directed.

M & L for preparation of newly plaster surfaces of ceiling and applying three coat of white wash complete all as specified and directed.

Dismantling PVC water tanks exceeding 500 litres but not exceeding 1000 litres capacity and removing complete all as specified

Dismantling PVC water tanks exceeding 250 litres but not exceeding 500 litres capacity and removing complete all as specified

S&F Rotational moulded poly-ethylene water storage tanks (ISI marked) ( cylinderical vertical with closed top ) 1000 litres capacity ,hoisted and fixed in position complete all as specified.

S&F Rotational moulded poly-ethylene water storage tanks (ISI marked) ( cylinderical vertical with closed top ) 500 litres capacity ,hoisted and fixed in position complete all as specified.

S&F in repair Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball , suitable for 20 mm bore pipe, screwed for iron pipe and fixed. .(Minimum weight 20mm-210 gms.) complete all as specified.

Taking up or down steel tubing 15 mm dia bore and connection including removal from site complete all as specified and directed .

Description same as per Item No. 33.00 but 20 mm bore of pipe

Description same as per Item No. 33.00 but 25 to 32 mm bore of pipe

S & F 15 mm dia bore jointing and testing galvanised steel water tubing medium grade with all fittings such as bend, elbow, socket reducer etc fixed to walls and ceilings as in conceald or flush inside the wall complete all as specified and directed

S & F 20 mm dia bore jointing and testing galvanised steel water tubing medium grade with all fittings such as bend, elbow, socket reducer etc fixed to walls and ceilings or laid in floors, complete all as specified and directed

S & F 25 mm dia bore jointing and testing galvanised steel water tubing medium grade with all fittings such as bend, elbow, socket reducer etc fixed to walls and ceilings or laid in floors, complete all as specified and directed

M & L cutting chases in brick wall for concealed water tubing, pinning in, making good of facings where required and pointing in cement mortar 1:3 to ends or edges etc, cutting not exceeding 10 cm width or girth, complete.

S&F in repair stop /gate valves 25 mm dia cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for GI pipe or for unions and fixed all as directed.

S&F in repair stop /gate valves 20 mm dia cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for GI pipe or for unions and fixed all as directed.

Taking down chowkhats or frame with shutter (without taking off shutter from the frame) exc 1.5 sqm but n.exc 4 sqm each and removal from site ,all as specified and directed

Taking Down shutters of any description exc 1.00 sqm and n.exc 2.00 sqm each incl removal from site all as specified

Taking Down shutters of any description exc 1.00 sqm and n.exc 2.00 sqm each and refixing in same opening after rapair the shutter complete all as specified

M & L 2 nd class hard wood Plain solid , straight chowkhats and frames wrought, framed on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as directed and directed.

S&F 2nd class hard wood 35 mm thick Plain, framed, pannelled shutters (any number of panels), with panels of 12 mm thick veneered particle board medium density, wood particle board with commercial face veneers, complete as specified.

S&F 2nd class hard wood 35 mm thick Glazed and skelton shutters, open rebated and prepared to receive glass, gauze etc, (without sash bars),edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc, size of members of shutters as specified in SSR Part I, Section 8, clause8.24(a) complete all as specified and directed. Note :- Glass pane and wire mesh shall be measured and paid separately in respective supply only item.

S&F 300mm mild steel ordinary rat rail rod pattern springs including roller & roller plate complete all as specifeid and directed

S&F galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.00mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

S&F aluminium anodised barrel tower bolts 200 mm long of extruded section and fixed complete all specified and directed.

S&F aluminium handles, size 150 mm cast type, anodised complete all as specified and directed.

S&F 250 mm long aluminium alloy, anodised sliding door bolt with hasp, staple(bolt type) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy fixed complete all as specified and directed.

M & L 150mm length floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring, fixed to floor complete all as specified and as directed

M & L Preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise description, over 10 cm width or girth apply two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M & L Preparation of old wood painted surfaces of any description, not otherwise description, over 10 cm width or girth apply one coat of synthetic enamel paint complete all as specified and directed.

M & L Preparation of new or previously untreated steel and iron surfaces of any description, not otherwise description, over 10 cm width or girth apply two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer complete all as specified and directed.

M & L Preparation of old steel and iron surfaces of any description, not otherwise description, over 10 cm width or girth apply one coat of synthetic enamel paint complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n.exc 1.5 sqm each and removal from site ,all as specified and directed

S&F factory made Solid PVC Door Frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube, all as specified and directed.

S&F 30 mm thick factory made solid panel PVC door shutter (style) consisting of frame made out of M.S. tubes of 19 gauge thick & size 19mmx19mm for stiles and 15mmx15mm for top & bottom rails. M.S. frame shall have a coat of red oxide primer of approval make and shall be covered with 5 mm thick heat moulded plain colour PVC ‘C’ channel of size 30x50mm forming stiles and 5 mm thick wide pvc sheets for top rail ,lock rail and bottom rail on either side and 10 mm (5mmx2mm) thick having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour 5mm thick PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with 30 mm widex5 mm thick pvc ,sheet suitable PVC sheet beading, and joined together with solvent cement on either side,and additional 5 mm thick pvc stripes of 20 mm width is to be struck on interior side of "C" channel using pvc solvent adhesive complete at site as per specification complete all as specified and as directed.

S&F aluminium handles, size 150 mm cast type, anodised complete all as specified and directed.

S & F aluminium anodised barrel tower bolts 150 mm long of extruded section and fixed complete all specified and directed.

S & F butt hinges, size 100 mm type C-21 extruded aluminium alloy with galvanised mild steel hinge pin, anodised ISI marked complete all as specified and directed

Taking down shutters any description n.exc 1 Sqm each, removal from site, complete all as specified and directed

Dismantling timber scantling 40 sq.cm and over in section, in any position frame work complete all as specified and directed

Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed

S & F 18/19 mm thick Plywood grade BWR, type BB as in cupboard , wardrobe etc.

M & L 0.9 mm thick Decorative laminate type 1, of surface finish, colour and pattern as approved, fixed with approved adhesive over plywood as per manufacturer's instructions complete all as directed and specified.

S&F Aluminium, anodised, barrel tower bolts of extruded section and fixed, 125 mm length of bolt, ISI marked complete all as specified.

S&F butt Hinges, medium weight, cold rolled mild steel, 75 mm size, ISI marked complete all as specified.

S&F aluminium handles, size 150 mm cast type, anodised complete all as specified and directed.

S & F 100 mm length Haps and staple, aluminium anodised , including bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F factory made PVC side laminated shelf /partition of required size consisting of panel of 18mm thick celuka PVC ply and for supporting the hold of shelf /partition and shall provided 3 edges in size 18mm x 18mm as per required length the front side of the edge visible in the front of the shelf / partition to be edge lipped by 18mm width x 1mm thick PVC Sheet of density 600 Kg/Cum manufactured by ISO 9001 - 2015 Cerfified campany , using solvent cement etc.complete as direction of Engr-in-Charge manufacturers specification and drawings.

S & F Stainless steel self closing hinge of 75 mm size for PVC door shutter complete as specified and directed.

S & F 125 mm size MS mat / glossy finish handle complete as specified and dirceted.

S & F rolling hinges for drawer complete as specified and directed.

Complete removal of exisiting wall treatment on old plaster or concrete surface by scraping tin plate, leaned of all laitance , loose material, oil grease by mechanical means such as wire brushing & shot blasting , finally vacum cleaning of all loose solid particals complete all as specified and directed.

M&L for applying 1 mm thick wall care putty on wall on internal old/new wall surfaces as per manufacturerer instruction complete all as specified and as directed

M & L for applying two coats of oil bound distemper over a coat of primer on prepared wall putty surfaces of internal wall all including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as per specified and directed.

M & L preparing of plastered or unplastered surfaces of walls, cornices etc and applying two coats of Dr Fixit Raincoat Elastomeric Acrylic water proof exterior coating or equievalent over one coat of primer of DR Fixit Primesea or equievalent, complete all as specified and directed. Note :- All application shll be done through authorised company applicator as aproved by GE.

M & L preparing old decorated plaster or un-plastered surfaces of ceiling and applying one coat of white wash including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete complete all as specified and as directed.

M & L Preparation of old wall surface and apply one coat of white wash on wall surface including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified and directed.

Demolition of reinforced cement concrete of any descrption and any position as in roofs, floors,beams, landings, chajjas, balconies, cover slabs and similar suspended work complete all as directed.

S & F Joist, channel, angle or tee , square or rectangular sections, fixed indipendently including cutting to dead length where required, notching, drilling, fitting, riveting and/or welding or connecting with bolts and nuts , providing and fitting angle cleats, fish plates, gusset plates etc, complete all as specified and directed.(Fe-410-W(Gde-E-250) quality A).

S & F MS RHS/ SHS Framed work as in grills for balcony, railing for stair case or similar works etc, including cutting to dead length where required, notching, drilling, fitting, riveting and/or welding or connecting with bolts and nuts, or providing and fitting angle cleats, fish plates, gusset plates etc, complete all as specified and directed.

S & F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

S & F Powder coated aluminium sliding glazed windows with three track shutter sliding (two shutters glazed and one shutter wire mesh) shall be two part as upper patr shall be three movable shutter and lower part consist three shutter (one openable in centre and both side fixed type shutter with frosted glass) with following specification and making good the adjacent side of jombs of windows by plastering in CM 1: 3 even and smooth complete etc . shifting of existing cooler stand where required complete all as specified and as directed by Engr-in-charge. (i) Windows frame of cross section 101mm x 44mm x 1.5mm thick. (ii) Three way track for sliding shutters of cross section 91.8mm x 31.75mm x1.1mm thick. (iii) Sliding shutter frame of cross section 40 x 18 x 1mm thick. (iv) 4 mm thick tinted glass superior quality. (v) IDPE Rubber guasket for fixing of glass. (vi) Locking cleats per shutter -01 Nos. (vii) Sliding rollers per shutter - 02 Nos. (viii) Aluminium wire cloth 0.30mm nominal dia of wire and average width of aperture 1.56mm for shutters 01 Nos. (ix) fixing screw for frame with wall per windows- 10 Nos.

S&F powder coated aluminium ventilator cross section 63.5x38.10x1.5mm consisting of two partions upper portion shall have louvers with 3mm thick pin headed glass and aluminium wire cloth 0.30mm nominal dia of wire and average width of aperture 1.56m fixed with aluminium beads and securing on outer face of frame and lower portion of ventilation shall be fixed with 3mm thick pin headed glass with IDPE rubber gasket including aluminium beads, including preparation of jombs all around in CM 1:3 finishing even and smooth complete all as specified and directed.

S & F in repair 25mm dia Stainless steel curtain rod of 1 mm thick fancy type fixed with modren bracket & doms design & sample approved by Engr -in Charge/GE complete all as specified and directed

S&F Stainless steel peg set having 06 Nos spikes fixed to wall complete all as specified and directed

S&F in repair 15 mm dia bore chromium plated 3 in 1 wall mixer non telephonic shower arrangement with connecting legs & wall flanges complete all as specified and as directed.

S&F 15 mm dia bore swan neck wall mount kitchen mixer, brass chromium plated with capstan heads screwed down high pressure with or without letter ‘HOT’ or ‘COLD’ with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and directed.

S & F in repairs Sink with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers,waste pipe and wastes coupling, including bedding in cement mortar to dwarf wall or including fixing cantiliver brackets and connecting union to pipe overall size 915 mm x 460mm bowl size 410 mm x 330 x 160 mm complete all as specified and directed.

S & F in repairs 15 mm bore bib taps long body, chromium plated cast copper alloy long body , screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed.

S & F in repair Bidet spray (Health faucet) with 1 meter tube and holder, complete all as specified and directed.

S & F PVC bath cabinet box type with shutter complete.

S&F in repair CP Toilet paper holder, complete all as specified and directed by Engineer-incharge.

S & F (in repair) brass chromium plated angle Scock 15 mm dia screwed for iron pipe or brass ferrule, complete.

S & F( in repair) 15 mm bore two way bib taps long body, chromium plated cast copper alloy long body , screwed down, screwed for iron pipe or for brass ferrule, complete.

S & F in repairs brass chromium plated tubular towel rail, 20mm dia D type 60 cm long between flanges complete all as specified.

S & F in repair swivel shower rose of chromium plated with or without swivel joints, any size, including fixing to 15mm dia steel pipe for required length or union complete all as specified and directed

S & F in repairs vitreous china wash hand basin white or any colour , flat back of size 550mmx400mm fixed on and including cast iron cantilever bracket, 32mm dia brass waste coupling and 32 mm dia PVC waste pipe complete all as specified and directed.

S&F 15 mm dia bore brass chromium plated swan neck mixer pillar tap with capstan heads screwed down high pressure with or without letter ‘HOT’ or ‘COLD’ with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and directed.

S & F( in repairs) Vitreous chaina wash down water closet pan (pedestal pattern), white including pedestrial pan and trap, including seat cover for pedestial pan and connecting to drain or outgoing pipe and to flushing pipe, antisyphonage pipe etc complete all as specified and directed.

S & F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60cm long fixed to plugs on wall all as specified and directed

S & F in repairs vitreous china squatting pan 'Orissa patern' size 580 mm X 440 mm, white, with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, anti-syphonage pipe, etc complete including making good to floor

S&F in reapir Stainless steel Plate Rack Size 36"x31''X10'' with fixing to wall ,nuts ,bolts /screw complete all as specified

S & F in repairs 10 litres capacity PVC low level cistern ‘ white’ with inlet, float valve and handle including flushing pipe of PVC 32 mm dia and connection to pipes complete all as specified and directed.

S & F in repairs PVC connection 15 mm dia 600 mm long with PTMT nuts at both ends complete all as specified and directed.

S&F in repairs PVC (SWR) 75 mm bore pipes single socketed in any length with rubber ring joints with solvent cement fixed to walls incluidng clamping complete all as specified and directed.

Description same as per Item No. 111.00 but bore of pipe 110 mm.

S & F in repair 110 mm dia bore PVC (SWR) bends any radius with solvent cement joints, fixed to complete all as specified and directed.

Description same as per Item No. 113.00 but bore of pipe 75 mm.

S & F in repair PVC (SWR) nahani trap/floor trap with grating having diameter of outlet 75 mm including joining to waste pipe with solvent cement complete.

S & F SS cockroach trap with grating including joining to waste pipe complete all as specified.

S & F 110 mm bore PVC(SWR) vent cowl including taking out existing unserviceable cowl complete

Description same as per Item No. 117.00 but bore of pipe 75 mm.

S & F in repair 110 mm dia bore PVC (SWR) junction single, single (T) equal or unequal, joints with solvent cement,complete all as specified and directed.

Description same as per Item No. 119.00 but bore of pipe 75 mm.

Taking down eaves gutters and rain water pipes (any size or pattern), including all fitting ,heads,shoes,bends,swan-necks,etc including removal from site all as specified.

S & F PVC pipes 110 mm bore single socketed in any length with rubber ring joint and fixed to walls incluidng clamping complete all as specified and directed.

S & F PVC bends 110 mm bore any radius with solvent cement joints, fixed complete all as specified and directed.

M & L for reparing of RCC projection, chajjas,roofs,facia, colum etc by necessary preparation i.e scrapping ,cutting,chiseling,derusting and cleaning exposed reinforecement, surfaces of damaged, loose RCC surfaces and applying one coat of cement slurry and filling the surfaces with cement concrete (1: 1-1/2: 3) using 12.5 mm graded crushed stone aggregate and reinforeced with welded mesh of weight exc 2Kg per sqm but n.exc 3Kg/sqm with or without facia and finished exc 5sqm each and thickness of RCC using coarse sand in patches area not each and thickness of RCC member n.exc 70mm at any height complete all as specified. Note : - Cost of formwork and welded mesh shall be deemed to be included.

S & F in repair corner shelf of 200 mm size complete. Make : Plumber/ Pearl/ Jaquare complete all as directed and specified.

S & F powder coated aluminium door seal 30mm wide and length as per requirement of site including dust/insect arrestor complete all as specified and directed.

Excavation in trench in soft/loose soil not exceeding 1.5M wide and not exceeding 1.5M in depth for sewage line, manhole etc not exceeding 10 sqm on plan and n.exc.1.50m in depth and getting out in any type of soil complete.

Returning, filling in Soft/Loose soil including spreading, watering and well ramming in layers n. exc 25 cm thick in any type of soil complete.

Removing excavated material to a distance n exc 50M and deposited where directed at a level n. exc 1.5m above the starting point complete.

M & L cement concrete 1:3:6 type C-2 (40 mm graded stone aggregate) concrete bed to 150 mm bore of drain pipes including packing under and haunching against the sides of pipes after they are laid and tested in trenches complete all as specified and directed.

M&L 150 mm internal dia of salt glazed stoneware (SGSW) drain pipes grade ‘A’ laid in trenches & jointed cement mortar 1:1, and including demolition and breaking up drain pipes, complete all as specified and directed.

M & L for Roughening / taking down existing roof treatment surfaces including plaster over old concrete roof by picking, sweeping clean and washing down with water to remove dust etc. all as specified and directed.

M & L Brushing neat cement slurry with 3 Kg of cement per Sqm for bonding of old concrete surface to new concrete/plaster surfaces complete.

M & L Cutting out cracks to 6 mm wide 'V' section in existing roofs or terrace (if cracks > 2.5 mm wide), cleaning out, wetting, grouting with and including chemical compound SUPER LATEX of DR. FIXIT of PIDILITE INDUSTRIES LTD or SBR LATEX of STP LTD,, water and cement in the proportion of (1:4:7) by weight mix or as per manufacturers instructions all as specified and directed complete.

M & L PCC 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) mixed with integral waterproofing chemical PIDIPROOF LW of DR FIXIT of PIDILTE INDUSTRIES LTD or STP No. 1 (LIQUID) of STP LTD @ 200 millilitre per 50 Kg per cement, as in padding on roof surface for correcting / making proper slope on roof, and finishing the surfaces fair and even without using extra cement complete all as specified. Note:- Liquid WPC shall be measured and paid separately.

M & L 10 mm thick rendering in CM (1:3) mixed with integral water proofing chemical compound PIDIPROOF LW of DR FIXIT of PIDILITE INDUSTRIES LTD or STP No 1 (liquid) of STP Ltd @ 200 mililitre per 50 Kg cement as per manufacturers instructions over concrete surface and finishing the surface fair and even without using extra cement complete all as specified.Note:- Liquid WPC shall be measured and paid separately.

Supply only liquid water proofing compound.

M&L Water proofing treatment on "Non approachable / non accessible roof" surface (Horizontal & Vertical surfaces) in following sequence through authorized applicator of the manufacturer all as specified and directed complete. (i) cleaning of new rendered surfaces properly and drying the surfaces. (ii) Applying a coat of oxidised bitumen based solvent primer @ 0.30 Kg / Sqm (iii) Laying 3 mm thick APP modified water proofing membrane with 100 mm over laps sealed and bounded to the surfaces by 'torchon' method.(iv) Applying two coats of bitiminous aluminium paint @ 200 Gram / Sq M (minimum) in two coats .Make incorporated : HYPERPLAS POLYSTER OF IWL (INDIA) LTD or equivalent in Pidilite industrries Ltd /STP Ltd all as specified and as manufacturer instruction complete. as per manufacturers instruction.

M & L for plain aluminium sheeting 0.56mm thick bright finished bent/cut to shape ( for covering parapet top, side of roof projection and other similar works) fixed with flat aluminium 10 x 2 mm and screw PVC raw plug @ 300 C/C distance complete all as specified and as directed.

M&L ATT treating the soil under plinth protection at the rate of 5 litres of emulsion per sqm of surface area complete all as specified and as directed

Demolition of cement concrete (unreinforced) of any description and in any position complete all as specified and directed.

M&L rendering 15 mm thick in CM 1:3 mixing with integral water proofing compound as per manufacturers instruction on concrete/brick surfaces, finished even and smooth without using extra cement all as specified and directed. (Note:WPC will be measured and paid separately)

M & L for appline one prime coat acrylic polymer modified water proofing coating(Brushbabd of FOSROC or equivalent) and over that two coats of acrylic polymer modified two component elastomeric water proofing membrance coating (Brush band of fosroc mate or equivalent) complete all as specified as per manufacturers instruction as directed by engineer-in-charge.Make:- Fosroc,Sika,Dr fixit Note :-1 . This item shall only be executed through level 4 or level 5 certified and authorised applicator of the company. 2. A warranty for 5 yerars in the form of written agreement shall be submitted by the contractor. 3.The rate quoted by the contractor shall include all the provision mention in this item including notes.

M & L PCC 1:5:10 type E-2 using 40 mm graded stone aggregate as in mas concrete complete all as specified and directed.

Taking down carefully copper/alluminium point wiring (light, fan, sockets or power ) complete including all fitings and fixtures such as switches,sockets, ceiling roses, pendens, egulators, light fittings etc, removing matrials to store for taking credit and making good disturbed surfaces complete all as specified and directed.

Taking down old unsv FTL fittings any type complete all as specified and directed .

M&L point wiring with 1.5 sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed FRLSH copper cable, 1100 volts grade, with multi stranded copper conductor drawn through and including non-metallic, rigid non mettalic PVC conduit (medium grade) concealed in wall / ceiling with and including 1.5 sqmm single core PVC insulated, multistranded, unsheathed, FRLSH copper conductor cable as continuous earth continuity conductor (green in colour) with cast Iron / pressed steel modular terminal boxes any size/module, conceiled on walls and fixed by neans of brass screws incl modular cover plates and cover frme any size/module, for mounting or housing switches, socket outlets, fan regulators, etc. including all other fixing accessories for one light / fan / exhaust fan / call bell point controlled by one 5 / 6 Amps switch, complete all as specified and directed.

Description same as per Item No. 147.00 above but for one 3 pin, 5/6 Amps socket outlet point on same board controlled by one, 1 way 5/6 Amps switch.

Description same as per Item No. 147.00 above but for one 3 pin, 5/6 Amps socket outlet point on independent board controlled by one, 1 way 5/6 Amps switch.

Description same as per Item No. 147.00 above but for one light point controlled by one, 2 way 5/6 Amps switch.

M&L point wiring with 2.5 sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed FRLSH copper cable, 1100 volts grade, with multi stranded copper conductor drawn through and including non-metallic, rigid non mettalic PVC conduit (medium grade) concealed in wall / ceiling with and including 2.5 sqmm single core PVC insulated, multistranded, unsheathed, FRLSH copper conductor cable as continuous earth continuity conductor (green in colour)with cast Iron / pressed steel modular terminal boxes any size/module, fixed conceiled in walls by means of brass screws incl modular cover plates and cover frme any size/module, for housing switches, socket outlets, fan regulators, etc. including all other fixing accessories for 15 / 16 Amps socket outlet on independent board, complete all as specified and directed.

S&F Ceiling rose three terminals surface bakelite type, AC, 50 HZ, 230V

S&F modular switch 1 way 6 A , 1 module complete all as specified and directed.

S&F modular switch 2 way 6 A , 1 module complete all as specified and directed.

S&F modular socket 6 Amps 2/3 pin combined 2 module complete all as specified and directed.

S&F switch modular type 16 A, 1 module complete all as specified and directed.

S&F socket modular type multipurposes 6/16 A, 2 module complete all as specified and directed.

S&F modular bell push type 6 A ,1 module complete all as specified and directed.

S&F bell multi music type AC 230 volts single pole complete all as specified and directed.

S&F surface /wall mounted LED batten (other than slim channel type) poly carbonate housing for retrofit LED tube T-8 type upto 1x22 watt, 4 feet long pre wired incl integrated electronic driver complete with all connected accessories all as specified and directed

S&F ultra bright LED poly carbonate tube light 4 feet long 18 to 20 watts with THD less than 15% very high effficiency suited for T-8 tube light luminare with system efficiency 120 lumens per watts, fixture lumen package should be ≥ 2200 lumen. High quality polycarbonate end cap in white finish and snap fitted to the housing complete all as specified and directed.

S&F wall mounted 10 watts LED batten 2 feet long comprising extruded aluminium heat shrink provided for efficient heat dissipation & integrated electronic driver with aluminium housing system efficiency of 110 lumen per watt and lumen package ≥1100 lumen per watts, THD < 15% complete all as specified and directed.

M&L for LED Bulk head fitings of wattage 6 to 13 watts designed for modern homes available with premium quality diffuser for glarefree light and easy to install snapfit installer complete including taking down of old CFL/bulb bulk head fitting, making good of surfaces all as specified and directed.

S&F LED bldg security light fitting 30 watts made up of pressure die cast aluminium housing with acylic cover as diffuser with IP-65 and IK-07 protection, THD < 10% , lumen output ≥ 110 lumen per watt complete all as specified and directed.

S&F decorative , wall mounting , brushed nickel finish fixture with opal glass diffuser suitable with 9 watt LED lamp B 22 base.

S&F MCCB ,DB VTPN wall mounted double door 6 way ,IP 43, IK 09 415 volts with facility to provide MCCB 3 pole 125 Amps 25 KA as incomer and SP/TP MCB's/Isolator as outgoing including removed old U/S DB in the wall again fixing the new DB and wall finising complete all as specified and as directed.

Supply& fix MCB DB, TPN, 4 Way double door , 415 volts capacity, IP 43, IK 07 with facility to provide MCB TPN 32 Amps as incoming and MCB SP 6-32 Amps as outgoing including removed old U/S DB in the wall again fixing the new DB and wall finising complete all as specified and as directed.

S&F MCCB 3 pole 415 V 125 A Hz with rupturing capacity 25KA.

Supply & Fix MCB TP 40 Amps current rating 'C' series 10 KA breaking capacitycomplete all as specified and directed.

Supply & Fix MCB TPN 32 Amps current rating 'C' series 10 KA breaking capacitycomplete all as specified and directed.

Supply & Fix MCB SPN 32 Amps current rating 'C' series 10 KA breaking capacitycomplete all as specified and directed.

Supply & Fix MCB SP 6 to 32 Amps current rating 'C' series 10 KA breaking capacitycomplete all as specified and directed.

Supply and fixing TV socket outlet complete all as specified and as directed

Supply and fixing telephone jack with shutter complete all as specified and as directed

Supply and fixing RJ 45 jack for internet with shutter complete all as specified and as directed

Sub main wiring with 2 single core,6 Sqmm, PVC insulated PVC unsheathed stranded FR LSH copper conductor cable in and including PVC concealed/ surface conduit of earth wire with 1 x 6.0 Sq mm copper cable fixed along with the sub main in PVC conduit and connecting to earth dolly complete including taking down old sub main wiring all as specified and directed.

Supply and fixing sub main wiring with 4 single core,10 Sqmm, PVC insulated PVC unsheathed stranded copper conductor cable in and including PVC concealed/ surface conduit of earth wire with 1 x 10 Sq mm copper cable fixed along with the sub main in PVC conduit and connecting to earth dolly complete including taking down old sub main wiring all as specified and directed.

Taking down existing exhaust fan/ceiling fan of any sweep after disconnecting necessary connection from ceiling rose to fan and deposit to MES store yard complete all as specified and as directed

S&F Exhaust fan non metalic single phase 230 volt of size 250 mm sweep with louver all as specified and as directed.

Supply and fix ceiling fan 1200 mm sweep ,230Volts complete with blades, conopy, down rod complete all as specifeid and as directed.

M&L for painting of ceiling fan 1200 mm sweep complete with synthetic enamel paint by spraying , filling cavities with filler, one coat after cleaning all dust incl hanging into its original position as directed.

S&F Exhaust fan , steel body AC single phase 230 volt of size 300 mm mm sweep complete with blade, frame and louvers all as specified and directed incl making/alteration of hole wherever necessary making good disturbed surface, painting to match with existing surfaces.

Supply and fix Sheet metal enclosure, SPN, with two pin and earth metal plug and socket, 20 Amps, 240 Volts, including one MCB SP 20 Amps complete all as specified and as directed.

Supply , fixing rigid non metallic PVC conduit fixed conceiled/on wall wherever necessary with all connected accessories 20 mm dia for LAN , telephone , and cable TV connections complete all as specified and as directed.

S&F modular fan regulator stepped electronic, modular type 02 module as specifed and directed.

M&L for three phase meter protection box made pout of MS sheet 2 mm thick of size 350 mmx300mmx200mm complete with hinges and 2mm thick MS door with acrylic/glass opening of size 100mmx100mm for meter reading complete incl two coat of synthetic enamel paint over a coat of red oxide primer all as specified and directed.

M&L for Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm thick, buried directly in ground vertically to a depth not less than 2.25 meters deep below ground level with top edge of the plate not less than 1.5 Mtrs below normal ground level connect to galvanised earth lead wire of 4.0 sqmm size by means of bolts, nuts, check nuts and washers of galvanized iron or steel up to 7.5 meter length including connected to earth plate including necessary excavation & earthwork, PCC (1:3:6) type C-1 earth chamber, 40 mm thick RCC cover 1:2:4 mix with 6mm dia nominal reinforcement @ 150 mm c/c both ways etc complete all as shown in electrical plate No 5, connected to earthing test point complete including testing on completion all as specified.

GIRIRAJ CONSTRUCTION AND TRADERS

sunway associates

Goyal Construction

Jamna Constructions