REPAIR / MAINTENANCE OF EXTERNAL ELECTRIC LT DISTRIBUTION SYSTEMAND REPAIR / REPLACEMENT OF INTERNAL WIRING, FITTINGS AND FIXTURES AT KHREUH AND SHER-E-SHALI GRN

Amount

Excavation in trenches not exceeding 1.5 m wide and n.exc. 1.5 m deep for foundation of poles/stay/cable etc including getting out in any type of soil complete all as specified and directed by Engr-in-Charge.

Excavation in trenches beyond 1.5 m wide and n.exc. 3 m deep for foundation of poles/stay etc including getting out in any type of soil complete all as specified and directed by Engr-in-Charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in depth.

Removing excavated material n.exc. 50m and depositing where directed at a level n.exc. 1.5 m above the starting point.

Sand cushioning to cable with dry fine sand in trenches 8 cm below the cable and 15 cm above the cable after laying complete all as specified.

Bricks laid in trenches flat with width equal to length of brick for cable protection well burnt sub class 'B' laid across the cable complete all ad specified.

Plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete complete all as specified.

Plain cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in foundation filling and mass concrete complete all as specified.

Supply and fixing steel tubular swaged pole with cast iron base plate finial tapper plug, bolts nuts and screws and specified type 410-SP-31 ( 9 Mtr long) in truly vertical position 1.5 m length of pole above ground level shall be painted with two coats of synthetic enamel paint in strips of 30 cm width, black and yellow alternatively and painting with two coats of aluminum paint over a coat of red oxide primer on rest part of pole and its connected parts complete all as specified laying GI pipe light grade for cable protection and fixing to existing pole with flat iron clamp 25x3mm including nuts bolts and washers etc complete of 40mm dia including taking out old unserviceable pole complete all as directed by Engr-in-Charge

S & F Pin type insulator porcelain, vitreous, white/ brown or green insulators including one galvanized MS spindle, two galvanized iron washer, GI nut of size 100 mm height and 65mm dia 1100 volts grade including dismantling of old unsv complete all as specified

S & F Shackle type insulators, porcelain, vitreous white/ brown or green including galvanised MS strips, bolt, nuts and washer of size 75mm height and 90mm dia, size of strap section 31x3mm and dia of 12 mm for working pressure 1100 volts grade incl dismantling of old unsv complete all as specified

M & L for Cross arms, bracings, supports, clamps and back plate fabricated from structural steel section including nuts, bolts, washers, welding bending cold or hot, drilling holes for bolts in any shapes size as indicated or directed and inclusive of one primer coat, and one under coat and one finished coat of aluminium paint incl dismantling of old unsv complete all as specified.

Aluminium conductors, reinforced (ACSR) conductor of any size for OH lines including stretching, binding wire ,jumpers, line taps etc including dismantling of old unsv complete all as specified.

Restretching only the ACSR conductor fixed on over head line pole and tightening the ACSR, taking down the conductor from insulators complete with auth sag and rewinding with insulators in proper position after tightening with new aluminium winding wire of dia 2mm all as specified and directed by Engineer-in -Charge.

Stay assembly complete with accessories as shown in electric plate No. 1 and including loop type insulator & stay clamps white brown or green with over all dimensions 65x90mm, clearance of hole 16mm complete all as specified. Note:- Earth work , PCC shall be measured and paid for separately.

M&L in repairs MCCB 4 pole, 415 volts adjustable type, 63 Amps with breaking capacity 35/36 KA complete all as specified.

M&L in repairs MCCB 4 pole, 415 volts adjustable type, 100 Amps with breaking capacity 35/36 KA complete all as specified.

M&L in repairs MCCB 4 pole, 415 volts adjustable type, 160 Amps with breaking capacity 35/36 KA complete all as specified.

M&L in repairs MCCB 4 pole, 415 volts adjustable type, 200 Amps with breaking capacity 35/36 KA complete all as specified.

M&L in repairs MCCB 4 pole, 415 volts adjustable type, 250 Amps with breaking capacity 35/36 KA complete all as specified.

M&L in repairs MCCB 4 pole, 415 volts adjustable type, 400 Amps with breaking capacity 35/36 KA complete all as specified.

M&L in repairs Change over switch on load 415 volts TPN in sheet metal enclosure of capacity 63 Amps complete all as specified.

M&L in repairs Change over switch on load 415 volts TPN in sheet metal enclosure of capacity 100 Amps complete all as specified.

M&L in repairs Change over switch on load 415 volts TPN in sheet metal enclosure of capacity 200 Amps complete all as specified.

M&L in repairs Change over switch on load 415 volts TPN in sheet metal enclosure of capacity 400 Amps complete all as specified.

S&F in repairs 1100 volt grade heavy duty XLPE cable with PVC insulated aluminium conductor served with inner sheathing of PVC tape armoured with galvanized steel strip or wire and overall PVC sheathed of size 16 Sqmm nominal cross section 2 core laid in trenches, fixed to pole or passing through pipes including all necessary clamps, nuts, bolts washers complete all as specified and directed. Note- Earth work and protection work shall be measured and paid separately

Description all as per item No. 26 above but cross sectional area 35 Sqmm 3.5 core complete all as specified and directed.

Description all as per item No. 26 above but cross sectional area 25 Sqmm 3.5 core complete all as specified and directed.

Description all as per item No. 26 above but cross sectional area 95 Sqmm 3.5 core complete all as specified and directed.

Description all as per item No. 26 above but cross sectional area 50 Sqmm 3.5 core complete all as specified and directed.

Taking out from trenches/poles/wall etc LT UG Cable PVC insulated sheathed with multistranded aluminium conductor armoured and relaying after fault rectification duly tested in trenches/Poles/Wall of LT UG Cable of any sizes including Earth work complete all as specified and directed by Engr-in-Charge

M&L cable end heat shrink type jointing kit 1100 Volts for indoor/outdoor termination with jointing material and accessories suitable for 25 Sqmm to 50 Sqmm 3.5/4 core XLPE/PVC armoured aluminium conductor cable complete all as specified and directed by EIC.

M&L cable end heat shrink type jointing kit 1100 Volts for indoor/outdoor termination with jointing material and accessories suitable for 50 Sqmm to 120 Sqmm 3.5 core XLPE/PVC armoured aluminium conductor cable complete all as specified and directed by EIC.

M&L cable end heat shrink type jointing kit 1100 Volts for indoor/outdoor termination with jointing material and accessories suitable for 185 Sqmm to 300 Sqmm 3.5 core XLPE/PVC armoured aluminium conductor cable complete all as specified and directed by EIC.

Supply and fix LT Overhead lines on existing poles with XLPE Insulated AB Cable 3-Core x16 Sqmm + 1 core x 16 Sqmm with bare messenger including accessories like Dead End, Suspension clamp, piercing connector, I -Hook etc including taking down existing O/H conductor and depositing to MES Store yard complete all as specified and directed by Engr-In-Charge

Supply and laying rubber mat 2mtrx1mtrx19mm as per ISI mark for 11 KV Make : JB/Jyoti/Rashtrya or equivalent complete all as specified and directed

Painting of steel tubular electrical poles cross arms channels etc after scrapping the old patchy cracked painted applying one coat of aluminium paint to complete pole,clamps,channel ,cross arms and black strip of 30cm up to 1.5 mtr height on the same including preparation of surfaces complete all as specified. Note: Contractor will ensure shut down on the feeder in writing before commencement of painting work on electrical poles

Trimming of trees branches from electric over head lines and clearing of 2 meter distance horizontal and vertical from outer edge of conductor including removing cut branches 50 Mtr (minimum) away from the place all as directed by Engr-in- Charge. Note: Contractor will ensure shut down on the feeder in writing before commencement of work on electrical lines.

Supply and laying in repairs GI tubing light grade with all fitting laid in trenches or fixed on wall along pole complete for protection of electric cable/strip complete all as specified by Engineer-in-Charge. (a) 50mm dia light grade GI tubing

(b) 40mm dia light grade GI tubing

Supply and replacement of battery charging unit up to 24 volt DC, with automatic cut off facility, with 6 to 24 volt control regulator, volt meter and ammeter all as specified and directed by Engr-in-charge.

Supply in replacement of voltmeter 0-500 volts digital type including taking down old existing unsv all as directed by Engr-in-charge.

Supply in replacement of Ammeter 0-400Amps digital type including taking down old existing unsv all as directed by Engr-in-charge.

S&F in repair CTs for ampermeter including taking down the existing old CTs .

Supply and fixing of new Inverter specification of automatic start 2 KVA/24V Capacity, including 24 months warranty, Upto 21 amp charging current, maximum bulb load -1600 watt and Battery of 150 ah Battery specification- low maintenance robust tubular plates, excellent overcharge tolerance, warranty 24 Months including luminous plastic trolley for single flate battery (Gery colour) including dismantling of old unsv Inverter installed at MES Power house and deposited to the MES Store yard complete all as specified and directed by Engr-in-Charge.Make : Sukam/Microtek/Luminous

Supply & fix in replacement cable PVC insulated flexible aluminium conductor cable of size 2.5 Sqmm single core cut to pieces all as required, drawn into conduit/pipe fixed to wall or pole all as directed by Engr-in-charge.

Taking down old/UNSV fluorescent security light/street lights and deposited with MES stores and S&F LED 30 Watt security light Energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with acrylic cover as diffuser with IP66 protection and impact resistance of IK07 complete all as per directed by EIC. Make Havells Cat Part No ENDURACITYLITEPLATSL30WLED757SASYBOPC or Philips cat part No BRPO22 LED 20CW MR SI PSU GR (or) C&S product code No DRACO/30W cat part No LTESS30W LED

Taking down old/UNSV fluorescent security light/street lights and deposited with MES stores and S&F LED flood light 40 Watt security light fitting pressure die cast aluminium housing with heat resistant toughened glass & IP 65 protection complete all as specified and directed by Engineer - in - Charge. Make Surya Cat Part No SLEFL40WIP65 RFLOOD or Philips cat Part No BVP 120 LED 35 CW FG SI PSU GR (or) C&S Cat product code No ORION-C/50W/W cat part No LTEFC50WHPLED/W

Taking down old/UNSV fluorescent security light /street lights and deposited with MES stores and S&F LED 60 Watt security light new generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing high power LED as lighting source and lens embedded PC cover having top opening separate driver compartment with IP66 protection and impact resistance of IKO7 with 10KV built-in-surge protection device complete all as directed by EIC. Make Havells Cat Part No ENDURAPEARLPLUSSL60WLEDPASYTOPC (or) Philips cat part No BRP 409 LED060 CW HE NR PC SI PSU GR (or) C&S product code No INDUS-i/60W, Cat part No LTESS160WLED

Supply & fix in replacement electronic driver suitable for LED security light 25/30 watt as per required at site Make-Havells /Philips/Bajaj.

Supply & fix in replacement electronic driver suitable for LED security light 45/48 watt as per required at site Make-Havells /Philips/Bajaj.

Taking down old Unserviceable Bldg Sec light fitting and taken as credit including supply & Fix New generation energy saving & environmental friendly long life Versatile pressure die-cast aluminium IP65 roadway luminaries with high power LED as light source along with suitable bracket incl all accessories all as specified and directed by Engr-in-charge. Make: Havells, Cat Part No: LHEWDRP7PN1W025 or equivalent in Bajaj/ Philips

Supply and fixing in repair 1100 volts grade heavy duty cable PVC insulated copper conductor (Solid ) of size 16 Sqmm single core served with inner sheathing of PVC tape and overall PVC sheathed in service connections. complete all as specified by the Engineer in charge. Make- Havells/Gloster/FINOLEX

Supply and fixing in repair 1100 volts grade heavy duty cable PVC insulated copper conductor (Solid ) of size 25 Sqmm single core served with inner sheathing of PVC tape and overall PVC sheathed in service connections. complete all as specified by the Engineer in charge. Make- Havells/Gloster/FINOLEX

S & F in repair aluminium thimbles 1100 volts suitable for 70 Sqmm to 150 Sqmm cable complete all as specified and directed by EIC. Make : Denson/Dowells/Cable Lugs

S & F in repair aluminium thimbles 1100 volts suitable for 25 Sqmm to 50 Sqmm cable complete all as specified and directed by EIC. Make : Denson/Dowells/Cable Lugs

S & F in repair aluminium thimbles 1100 volts suitable for 6 Sqmm to 16 Sqmm cable complete all as specified and directed by EIC. Make :Denson/Dowells/Cable Lugs

S & F in repair smooth finish highly durable ruggedness copper Copper thimbles 1100 volts suitable for 70 Sqmm to 150 Sqmm cable complete all as specified and directed by EIC. Make : Denson/Dowells/Cable Lugs

S & F in repair smooth finish highly durable ruggedness copper thimbles 1100 volts suitable for 25 Sqmm to 50 Sqmm cable complete all as specified and directed by EIC. Make : Denson/Dowells/Cable Lugs

S & F in repair finish highly durable ruggedness copper Copper thimbles 1100 volts suitable for 6 Sqmm to 16 Sqmm cable complete all as specified and directed by EIC. Make : Denson/Dowells/Cable Lugs

Supply, installation, testing and commissioning of Tamper proof single phase 230 volts AC Electronic energy meter of accuracy class-1, Digital type in Polycarbonate body conforming to IS-13779 and CBIP technical report 88 of capacity 10-40 Amps including wooden box for fixing meter and painting the wooden box of matching with existing wall colour incl dismantling of unserviceable meter and deposit to MES store yard complete all as specified and directed by Engr-in-Charge Make: HPL/AE/L&T

Taking down carefully aluminium/copper point wiring (light fan socket or power) complete with fitting such as switches, tube lights, ceiling rose, pendants, regulators, MCB DB, MCB'S, Main switch from control board and making good disturbed surfaces of walls, floor to match with existing specification complete and all as specified keeping aside regulators/ light fitting/ MCBs serviceable/ unserviceable items for reuse with in the same bldg or deposited to MES store yard

Point wiring for one light point/fan point controlled by one switch with 1.5 sqmm PVC FRLS insulated unsheathed copper conductor single core multi strand flexible cable and 1.5 sqmm PVC insulated unsheathed copper conductor single core cable (green color) as earth lead in and including PVC casing and capping/Conduit medium grade of suitable size run on wall/surface with all fittings (ISI Marked) controlled by one switch including CI/MS sunk box of required size or PVC Gang Box all as directed by Engr in Charge & 3mm thick plastic laminated sheet, including cutting chases to wall making good the disturbed surfaces to match with the existing specification complete all as specified. (Make of Cable : L&T, Polycab,Havells )

All as per srl item No-64 here in above but for one 3 pin 5A socket outlet independent controlled by one switch.

All as per srl item No-64 here in above but for one 5A socket outlet on the same board controlled by one switch.

All as per srl item No-64 here in above but for one 3 pin 15 Amps socket outlet independent with 2.5 sqmm PVC insulated unsheathed copper conductor single core multi strand flexible cable and 2.5 Sqmm PVC FRLS insulated unsheathed copper conductor single core cable (green colour) as earth lead.

M&L for sub main wiring with two single core PVC insulated flexible copper conductor cable of size 4 sqmm and one single core PVC insulated flexible copper conductor cable green colour of size 4 Sqmm as earth lead in & including concealed PVC casing capping medium grade 2mm thickness ISI marked or cutting chases to walls for laying conduit and making good the disturbed wall surfaces to match with existing specification incl taking down old unsv complete all as required at site or directed by Engr-in- charge. Make of Cable :Havells/L&T/HPL , Make of conduit: PLaza/Kalinga

M&L for sub main wiring with two single core PVC insulated flexible copper conductor cable of size 6 sqmm and one single core PVC insulated flexible copper conductor cable green colour of size 6 Sqmm as earth lead in & including concealed PVC casing capping medium grade 2mm thickness ISI marked cutting chases to walls for laying conduit and making good the disturbed wall surfaces to match with existing specification incl taking down old unsv complete all as required at site or directed by Engr-in- charge. Make of Cable :Havells/L&T/HPL /polycab

M&L for Switch piano flush button single pole one way 5 amps 240 volts

M&L for Switch Socket combination, 6 pin 5 and 15 amps multi purpose 2 in 01 flush type, 230 volts

M&L for Switch Socket combination 2 in 1, 5 Amps flush type, 230 volts

M&L for Socket 2 in 1, 5 Amps flush type, 230 volts

M&L for Socket 5/15 amps flush type, 230 volts

Ceiling rose surface Bakelite 2 to 3 terminals

Supply and fixing in replacement fan regulator electronic, step type hum free suitable to control speed of fan from 0 to 100% and connecting electrically all as required at site or directed by engineer-in-charge.

S & F Lamp holder insulated body with back plate for batten fittings

S&F bell push flush type 6 Amps 240 Volt

S&F bell/buzzer AC 230 volts single pole

Supply and fixing Plug top 3 pin 15 amps 230 volts Make :Cone /SSK/Anchor/Leader.

Supply and fixing Plug top 3 pin 5 amps 230 volts Make :Cone /SSK/Anchor/Leader.

Supply & fix in repair Rigid non-metallic PVC conduit of size 20 mm dia, exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc

Supply & fix in repair Rigid non-metallic PVC conduit of size 25 mm dia, exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc

Supply & fix in repair medium grade PVC casing and capping of size 20 mm dia, exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc

Supply and Fix PVC Gang box surface type suitable for fixing of 5 pin 15 Amp multipurpose switch socket on wall complete all as specified

Supply and Fix PVC Gang box surface type suitable for fixing of 5 pin 5 Amp multipurpose switch socket on wall complete all as specified

Supply and fix in replacement cable PVC FRLS insulated unsheathed with flexible multistranded copper conductor of size 1.5 Sqmm 1100 Volts grade as per site requirement of existing colour coding adopted . Make of cable L&T/Havells /HPL

Supply and fix in replacement cable PVC FRLS insulated unsheathed with flexible multistranded copper conductor of size 2.5 Sqmm 1100 Volts grade as per site requirement of existing colour coding adopted . Make of cable L&T/Havells /HPL

Supply and laying in repair 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape and overall PVC sheathed twin core 4 sq. mm nominal cross section in service connections

All as per item No 89 herein above but 6 sq.mm twin core

S & F in repair decorative box type mirror light LED 8W fixture with in built electronic driver complete with all accessories prewired and connecting electrically to ceiling rose using PVC FRLS insulated and overall sheathed cable Make-Havells Cat Part No LUMILINEBS9WLED830SPCWH or equivalent in /Philips/Surya

Supply and fix in repair Wall mounted LED Batten, extruded Aluminium heat sink provided for efficient heat dissipation & integrated electronic driver of Lamp type: 18W LED life time of 30000* hours including lamp all as specified and as directed. Make: Philips, Cat Part No: TMC 501 p 1 X T-LED 22W P3241 & ESSENTIAL LED TUBE 1200 MM 18W865 T8 AP 1 (for Tube rod) or equivalent in Havells cat part No ENDURA LINEARNE OBS 20W LED 830SPC WH OR C&S CAT PART NO TARA-E 120W LTDC122 20W LED/WD

Taking down old Unserviceable Bldg Sec light fitting and taken as credit including supply & Fix New generation energy saving & environmental friendly long life Versatile pressure die-cast aluminium IP65 roadway luminaries with high power LED as light source along with suitable bracket incl all accessories all as specified and directed by Engr-in-charge. Make: Havells, Cat Part No: ENDURAPEARLSL25WLED 757SASYTOPC or equivalent in PHILIPS CAT PART NO BRP042 LED 19 CW MR SI PSU GR OR C&S CAT PART NO DRACO/25W LTESS25WLED

Supply, Installation, testing and commissioning in repair of Recess luminary with minimum 70 % lumen maintenance, CRI should be greater than 80, Housing should made of CRCA with opal diffuser. Electronic Driver should be in-built , power factor >0.9 with THD <10%. System consumption should be between 28- 36W. Similar to Philips Cat No : RC380B LED 30S -4000 G4 L60 W60 PSU OD OC or Havells cat part No PLUTONE 02X2 PLR 28W LED 84OS or C&S cat part No CYGNUS/36W/W - LTCRSLM36WATT 2X2 OR CROMPTON CAT PART NO LPL2-36-CDLL 2X2

Taking down the old UNSV Bed lamp fitting and taken as credit including Supply, Installation, testing and commissioning of LED Wall light with system wattage not more than 4W, using 3W for LEDs. The lumen output of LED shall be (Light source) shall not less than 230 lumens. The housing shall be of aluminium and white color coating. The head of the luminaries shall be adjustable type. The beam angle shall be < 50 deg. Lamp lifetime up to: 15,000 hrs. Total lumen output fixture: > 170 lm. Bulb technology: LED, Safety Extra Low Voltage. Mains power: Range 220 V–240 V, 50-60 Hz. IP code: IP20, protection against objects bigger than 12.5 mm, no protection against water. Class of protection: I - earthed. The luminaries shall be integrated type. The Net weight shall not exceed 0.3 kg. make: PHILIPS 56240/31/16 STAR or equivalent in Eglo 93154 Single LED Lamp or HAVELLS/ SYLVANIA 0050990

Supply and fix in repair Wall mounted Endural LED Batten, high efficacy - 1051m/W, Short circuit & Voltage cut off protection, wide operating voltage range of 140V to 270V wide, lumen output of 4000 , System consumption should be between 36-40W including lamp all as specified and as directed. Make: Philips, Cat Part No: BN 308C LED 40S-6500 L120 PSU WH or equivalent in Havells Cat Part No- STOUTPIUS1200BS40W LED 857 SPC WH or Crompton Cat Part No-LCBI-40-TL

Supply and fix in repair wall mounting LED picture/mirror light, aluminum with silver finish, 6W complete all as specified and directed Make :- Philips Commercial code No 30973 , 12 NC code No 919215850143 or equivalent Wipro/CG/Havells

Supply, Installation, testing and commissioning in repair of Surface mounted LED luminary with full glow designed luminary > 30% energy saving, maintenance free, CRI 80, System consumption should be between 28- 36W complete all as specified and directed. The type shall be of 2'x2'.PHILIPS CAT. No. SM 365C LED 32-6500 PSU OD GR or Havells Cat Part No PLUTO SURFACE 2X2 PLS34W LED 84 OS or C&S CAT PART NO . CYGNUS-CS/36W/2X2/W-LTCSP36W LED 2X2

Supply and fix in repair sheet metal enclosure MCB distribution board, double door with IP-43 protection single phase 240 volts 4 way, including suitable size copper bus bar and neutral link make Hager/Merlin Gerin multi-9/Standard/Havells/Legrand fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification.

Supply and fix in repair MCB Distribution board , 240 volts single pole and neutral ,double door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link, 8 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete all as specified and directed. Make: Indoasian Cat part Nol:KSLT0008 or equivalent in Legrand/ ABB

Supply and fix in repair MCB Distribution board , 240 volts single pole and neutral ,double door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link, 12 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete all as specified and directed. Make: Indoasian Cat part Nol:KSLT0012 or equivalent in Legrand/ Havells

S&F in repair MCCB Distribution board, TP&N , vertical , double door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link,415 Volts 4 way fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete including 3 Pole V-Tec MCCB of 100 A rating & 16kA breaking capacity, MCCB pre-fitted at factory all as specified and directed. Make: Indoasian Cat part No KSLTVM04 or equivalent in Legrand/ Havells.

Supply and fix in repair MCCB Distribution board, TP&N , vertical , double door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link,415 Volts 8 way fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete including 3 Pole V-Tec MCCB of 100 A rating & 16kA breaking capacity, MCCB pre-fitted at factory all as specified and directed. Make: Indoasian Cat part Nol:KSLTVM08 or equivalent in Legrand/ Havells

M&L in repair for MCB single pole 240 volts 6 to 32 amps as per site requirement , with rupturing capacity 10 KA as per IS-8828-1996 (IEC-60898), biconnect upper and lower terminals , integrated label holder to ensure circuit identification, make : Hager, Legrand , Schneider (Acti-9)/Havells

M&L in repair for MCB single pole and neutral 240 volts 6 to 32 amps as per site requirement , with rupturing capacity 10 KA as per IS-8828-1996 (IEC-60898), biconnect upper and lower terminals , integrated label holder to ensure circuit identification, make : Legrand/ Schneider (Acti-9)/Havells

M&L in repair for MCB single pole and neutral 240 volts 40 to 63 amps as per site requirement , with rupturing capacity 10 KA as per IS-8828-1996 (IEC-60898), biconnect upper and lower terminals , integrated label holder to ensure circuit identification, make : Hager, Legrand , Schneider (Acti-9)/Havells

Supply & Fix in repair MCB Four pole 415 volts, 40 amps 'C' Curve 10 kA Capacity all as directed. Make: Indoasian Cat part No: 811240 or equivalent in Legrand/ Havells

Supply and fix in repair MCCB four pole , 415 Volt, 100 Amps,25 KA , adjustable thermal & fixed magnetic setting complete all as specified and directed. Make: Indoasian Cat part No: X1125S4Tor equivalent in Havells/Legrand/ ABB

Supply and fix in repair MCCB four pole , 415 Volt, 125 Amps,25 KA , adjustable thermal & fixed magnetic setting complete all as specified and directed. Make: Indoasian Cat part No: X1125S4Tor equivalent in Havells/Legrand/ ABB

Supply and fix in repair MCCB four pole , 415 Volt, 160 Amps,25 KA , adjustable thermal & fixed magnetic setting complete all as specified and directed. Make: Indoasian Cat part No: X1125S4Tor equivalent in Havells/Legrand/ ABB

S&F in repair ventilating fan of size 250 mm sweep white in colour, Plastic body suitable for 230 Volts 50Hz AC supply including making necessary opening for fixing in the location and making good disturbed surface to match with the existing surface all as specified and directed (Note : - Old unsv exhaust fans will be deposited at MES store yard). Make Havells model No : VENTIL AIR DX/Bajaj Model MAXIMA DX/Usha Model : FRESH

Supply and fixing in repair, Metallic body exhaust fan of 300 mm sweep, single phase including necessary addn/altn to accommodate at the existing location or making provision by cutting wall and making good the disturbed surfaces , matching with the existing wall all as specified and directed. (Note : - Old unsv exhaust fans will be deposited at MES store yard). Make: Crompton Greaves/ Havells /USHA

M&L painting of ceiling fan complete , using spray gun, in site with synthetic enamel paint by spraying including filling cavities with filler , one coat after cleaning all dust complete all as specified and directed

Replacement of capacitor 2/3.15 mfd AC 415 volts 50 Hz complete all as specified and directed by Engineer-in-Charge. Make : Asian/Jyoti/Usha /Apcos

Replacement of capacitor 4 mfd AC 415 volts 50 Hz complete all as specified and directed by Engineer-in-Charge. Make : Asian/Jyoti/Usha /Apcos

Replacement of ball bearing for ceiling fan /exhaust fan any size any make complete and all as specified Make : SKF/NBC/ABC.

Replacement of gun metal bush with suitable size, gun metal bush for ceiling fan any make, any size and sweep.

Taking down old heavy model ceiling fan including Supply & Fix 1200 mm sweep ceiling fan of 5 star rating, energy saving model with double ball bearing 230 volts 3 blades white in colour without regulator COMPLETE WITH CANOPY, suitable DOWN ROD all as directed (Note : - Old unsv fans will be deposited at MES store yard). Make: Havells, Type/ Model : SS-390 or equivalent in Usha/ CG

Rewinding of AC ceiling fan/wall mounting fan motor as existing at site any make with super enameled copper winding wire any gauge from 0.315mm to 0.193mm including cutting of old burnt winding. Sleeve work varnishing with `B' class insulation varnish, connection with flexible wire of appropriate size two core copper wire up to connector block qty of copper winding wire not less than 350 grms and not more than 500 grms per fan motor complete and all as specified.

Rewinding of exhaust fan motor any size, from 225 to 400 mm sweep with supper enameled copper wire of any size ranging from 0.500mm to 0.285 mm including necessary cutting of old burnt winding wire, cleaning of slots and provision of necessary threading/sleeve work and taking out connection in lead with PVC copper wire of appropriate size up to connector block complete and all as specified

Taking down carefully geyser 25/35/50 littrs capacity from wall after unscrewing nuts/bolts etc. and again refixing in position after repair and replacement of spare parts including testing complete all as specified and directed by Engr-in-Charge (spare parts shall be measured and paid for separately under respective items)

Removing the Geysers from building & depositing to MES Store yard , Supply and fixing Geyser of 35 Ltrs capacity 5 star rating including nuts, bolts connection pipe and gaskets etc, and fixing in same position and testing all as specified and directed( Old unsv geyser will be deposited at MES Store yard).Make Havells Monza EC or equivalent in Bajaj/CG

Replacement of unserviceable heating element AC 230 Volt of rating 1500W ISI mark as per existing any type complete all as specified and directed by Engr-in-Charge

Replacement of unserviceable heating element AC 230 Volt of rating 2000W ISI mark as per existing any type complete all as specified and directed by Engr-in-Charge

Replacement of unserviceable thermostat switch AC 230 Volt adjustable range from 0-90 degree Celsius complete all as specified and directed by Engr-in-Charge

Replacement of unserviceable Indicator lamp round/square type suitable for geyser 25-50 liters all as per sample AC 230 Volts complete all as specified and directed by Engr-in-Charge

Replacement of flexible PVC connection pipe heavy duty suitable for hot water to bear the temp of 100 degree centigrade with outlet and inlet connection brass adopters , washers of size 450 mm long 15 mm dia bore complete all as specified and directed by Engr-in-Charge

Supply and fixing of LED 7 watt pin type bulb complete all as specified and directed by Engr-in-Charge. Make-Havells/Philips/Bajaj

Supply and fixing in repair Automatic source change over with current limiter 30/20A ACCL complete all as specified and directed by Engr-in-Charge. Make Havells Cat Part No DHABOSN3020 OR Equivalent in Indoasian/L&T

Supply and fixing in repair Change over switch on load 415 volts TPN in sheet metal enclosure of capacity 63Amps Make: Havells/Indoasian/Standard

Supply and fixing in repair Change over switch on load 415 volts TPN in sheet metal enclosure of capacity 100 Amps Make: Havells/Indoasian/Standard

Supply and fixing in repair Change over switch on load 415 volts TPN in sheet metal enclosure of capacity 200 Amps Make: Havells/Indoasian/Standard

Dismantling the old unserviceable main switch and taken as credit including supply and fix new Double break Switch fuse Unit with 03 Nos HBC fuses conforms to IS/IEC 60947-1&3 metal clad Triple pole and neutral link, 415 volt 100 Amps HRC type all as directed. Make: Standard Cat Part No: ISFNTW4100 or equivalent in Havells/ Legrand

Dismantling existing UNSV hylam sheet of any size from boards removing switches etc. Supply and fix hylam sheet 3mm thick including necessary cutting of suitable opening for switches, sockets, regulators, etc refixing of switches, sockets, regulators, etc replacing screws and connecting up and testing.

Supply and replacement of metal clad socket single pole and neutral enclosure with a two pin and earth plug top and socket complete with one single pole MCB 230 Volts 20/32 Amps all as specified and as directed.

Supply and install in repair LED with driver decorative post top energy saving environmental friendly, long life aesthetically designed with symmetrical light distribution complete all as specified and directed Make : - Havells Cat part No RUBYPT25W LED 757PSYMTOPC or C&S Cat Part No cetus/20W LTGLC20WHPLED/W equilvent in Philips/Wipro

Supply and fix Fluorescent tube rod 4' long suitable for 1x36 Watt FTl fitting complete all as specified and directed by Engr-in-Charge Make-Havells /Philips/Bajaj

Replacement of domestic use electronic ballast suitable for 1x36/40 Watt FTL all as directed by Engr-in-Charge. Make: CG/Havells/Bajaj

Supply and fixing in repair Automatic source change over with current limiter 32A 3PHASE ACCL complete all as specified and directed by Engr-in-Charge. Make Havells OR Equivalent in Indoasian/L&T/legrand

Supply and fix in repair LED Bulk Head light fitting ,System consumption should be between 6-10W. Similar to Philips Cat No : WT202W LED 6S NW PSU S2 PC or Havells cat part No RUGBYNE ONFT 10W LED 760 SSYMBOPC

Supply and laying in repair1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape and overall PVC sheathed twin core 10 sq. mm nominal cross section in service connections

Supply and laying in repair 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape and overall PVC sheathed twin core 16 sq. mm nominal cross section in service connections

M&L Plain cement concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in coping including necessary formwork to poles etc complete all as specified.

Earthing complete with galvanised steel earth plate electrode 60 cm x 60cmx6mm thick buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 meters below normal ground level. connecting to the GI wire 4 mm dia by means of bolls, nuts, check nuts and washers of galvanised iron and earth wire protected by provision of GI light grade pipe 15 mm bore including provision of concrete pit in PCC (1:2:4) type B-1 using 20mm graded stone aggregates with 40mm thick cover of RCC (1:2:4) reinforced with XPM weight not less than 4 Kg/Sqm) and frame of angle iron 25x25x6mm with lugs 02 Nos and handle of 6mm dia MS bar made to shape, GI medium grade 20mm bore pipe for watering , perforated at bottom. 1.75 metre long placed on top edge of earth plate. charcoal and common salt filling with fixing arrangement, funnel wire mesh and earth work in soft soil returning filling in and removal of surplus soil to a distance not exceeding 50 meters all as per electrical plate 3 of SSR-2009 Part-I and connecting to earth test point all as specified or indicated including testing on completion. NOTE :- (i) Item of earthing includes cost of 7.5 m long GI wire of size 4 mm dia with protection pipe of 15mm dia GI medium grade, any variation in length shall be adjusted through deviation order based on SSR rates enhanced by 25%. (ii) On testing after completion of earthing if the desired earth resistance is not obtained earthing will be re-done by the contractor at his own risk and cost.

M/S Hilal Builders

M/S AK ENTERPRISES

M/S SHIMAR STAR GLACIER

M/S Alam Construction