SPL REP TO BLDG NO T-04 T- 49 OF CCPU AND SPL REPAIR/ IMPROVEMENT OF TOILET BLOCK OF BLDG NO T-35 AT HQ CENTRAL COMD CAMP AND ADDN/ALTN OF WINDOWS VENTILATORS AND ALLIED WORK AT BLDG NO P-148 (OFFRS MESS) AT 6/11 GR AND PROVN OF STORAGE WATER HEATER

Amount

Dismantling asbestos cement (corrugated, semi corrugated etc) sheets & ridge in roof coverings complete all as specified and directed.

Dismantling timber scantling from unframed work 40 sqcm and over in section in any position complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description complete all as specified and directed.

S & F 0.50 mm thick pre-painted galvalume aluminium zinc coating galvanised iron based corrugated steel sheet with side lap and end lap of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wallself tapping screws complete all as specified and directed.

S & F 0.50 mm thick Pre-painted galvalume aluminum zinc coating GIbased Plain steel sheet / Ridge any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S&F rolled mild steel in roof trusses, (framed), trussed purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee,angle,channel or flat sections ) including distance pieces, cleats etc. conforming to Fe-410-W(Gde.E-250) quality-B complete all as specified and directed.

M&L structural Steel work in tubular trusses including special shaped washer etc complete using one or more tubes or induction butt welded tubes conforming to IS:1161-1979 grade St.-240 complete all as specified and directed.

Excavating in post holes in soft / Loose Sols (orsimilar holes) each n exc 0.5 cu. m, getting out, returning, complete all as specified and directed.

M & L for PCC 1:2:4,Type B2 using 40mm graded stone aggregate as in foundations, filling and mass concrete completed all as specified and directed.

M&L for brick work with fly ash bricks, old size, straight or curved on plan exceeding 6 mtr mean radius and built in cement mortar 1:6 complete all as specified and directed.

M&L for brick work with fly ash bricks, old size, straight or curved on plan exceeding 6 mtr mean radius and built in cement mortar 1:6 including demolition of brick work built in cement mortar including precast concrete articles complete all as specified and directed.

M&L for brick work with fly ash bricks, old size, straight or curved on plan exceeding 6 mtr mean radius and built in cement mortar 1:4 including demolition of brick work built in cement mortar including precast concrete articles complete all as specified and directed.

Dismantling wall/ceiling/cupboards boards complete all as specified and directed.

S&F suspended false ceiling with "E" Board / V-Board grid suspended ceiling grid system of grid size 600 x 600mm with GI frame work of main runner 38 x 24mm sheet thickness 0.4mm, cross tee 28 x 24mm sheet thickness 0.3mm and wall angle 24 x 24 x 0.3mm using 4mm thick high pressure steam cured classic variant E-Board, designer pattern to be placed in the grid suspended by 2 x 2mm (cross ) dia GI wire at distance n. exc 1.2m center to center with butterfly clips including preparation of surface complete all as specified and directed.

M & L for 75 mm thick PCC 1:3:6 type C-2 (using 20 mm graded stone aggregate) as in plinth protection, surface finished even and smooth without using extra cement, laid in panels n exc 3 mtr long ,including demolition of cement concrete (unreinforced) in ground floor and paving n exc 15cm thicknes and below or above ground level complete all as specified and directed

M&L for premium quality joint free non skid ceramic tiles, coloured, superior quality, 7 to 8mm thick, (square/ rectangular), area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 and dismantling of existing tiles complete all as specified and directed.

M&L for non skid ceramic tiles, coloured, superior quality, 7 to 8mm thick, (square/ rectangular) area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 and dismantling of existing tiles complete all as specified and directed.

M & L for glazed ceramic colour tiles of size (300 x 450mm) x 7-8mm thick in walls etc, set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles as in skirting/dados over and including 10mm thick backing coat in CM 1:4 complete all as specified and directed

S&F vitrified tiles, coloured, superior quality 10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 and dismantling of existing tiles complete all as specified and directed.

S&F vitrified tiles, coloured, superior quality 10mm thick (square/ rectangular) polished, in vertical surfaces etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 and dismantling of existing tiles complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc.

M & L for PCC 1:2:4, type B0 as in padding, coping or levelling coarse for filling undulations or depression on roof and for platform for mounting service tank complete all as specified and directed

M & L for 25mm thick PCC 1:2:4 type B1(using 20mm graded stone aggregate) as in leveling course etc. complete all as specified and directed

M&L Reinforced Cement Concrete 1:2:4 type B1 using 20 mm graded crushed hard granite stone aggregrate as in slab supported on walls, beams and columns in floors, roofs, landings,in selves etc incl necessary form work complete all as directed.

M&L for providing precast RCC 1:2:4 type B-1 using 20mm graded mechanically crushed stone agg as in cover slab for man holes, drains, soak well etc and similar articles etc, set in CM 1:4 with plain faces including chamfered weathering throating etc incl necessary form work and including demolition of old reinforced concrete of any description in any postion not otherwise specifically provided far complete all as specified and directed.

M & L for Mild steel TMT bars 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips. complete all as specified and directed.

M & L for Machine cut kota stone slab flooring 20-25mm thick over and including screed bed or bedding layer 20 mm thick in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing.complete all as specified and directed

M & L for Machine cut kota stone slab 20-25mm thick in treads and riser of steps, skirting, dado and pillar etc over and including 10 mm thick bedding layer or backing coat in CM 1:3 laid and jointed with grey cement slurry and pointed with grey cement mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed

M&L 18-20 mm thick granite stone slab, machine cut and polished as in cooking platform, bedded and jointed with grey cement slurry and pointed with white cement (1:2) using marble dust with admixture of pigment to match the shade of granite stone, laid over and including 20mm thick screed bed in cement mortar 1:4, including rubbing, rubbing, grinding, making hole for gas pipe line /oval type WHB and including making sandwitch moulding to edges including dismantling of existing stone slabs complete all as specified and directed.

M & L for 18-20mm thick both side polished Granite stone slab partition including polishing exposed edges, cutting chases in wall and inserting and fixing partition in cement mortar 1:4 as in urinal partitions complete all as specified and directed.

Labour only rounding to edges of stone slabs one edge, such as in steps, cooking plateform and other similar situations complete all as speciifed and directed.

Taking down chowkhat frame with shutter (without taking out shutter from the frame) n exc 1.50 Sqm and removing from sites complete all as specified and directed.

Taking down chawkhat frame with shutter (without taking out shutter from the frame) exc 1.50 Sqm but n. exc 4 sqm each and removing from site complete all as specified and directed.

Taking down anodised aluminium door shutters, side hung or fixed type exc 1.5 sqm and n. exc 4 sqm and refixing in same opening after repairing including necessary jointing cleats, glazing clips, rubber packing, screws etc and with existing anodised aluminium snap beading, screws anodised aluminium fittings such as hinges type B-21, 125mm long anodised section complete including floor door spring hydaulically regulated complete all as specified and directed.

Taking down Aluminium partition fixed type with frame complete all as specified and and Refixing with necessary repair in same opening and making good complete all as specified and directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65 x 100 mm mprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 mm2 and resistance to spread of flame of Class A category with property of being mite/borer proof,water/ moisture proof and fire retardant 152 SECTION 8 and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length omplete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).complete all as specified and directed. Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65 x 125 mm mprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 mm2 and resistance to spread of flame of Class A category with property of being mite/borer proof,water/ moisture proof and fire retardant 152 SECTION 8 and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length omplete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).complete all as specified and directed. Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made

S & F in Anodised aluminium powder coating (minimum thickness of powder coating 50 micron) frame for doors, windows , ventilators with one or more rebates including joining cleat for fixing etccomplete all as specified and directed.

S & F powder coating anodised aluminium glazed side hung /Sliding type door shutter with frame using section 100 x 44mm x 1.5 mm thick with standard door section having style, top rail, lock rail as 83 x 44 x 1.5mm where as bottom rail will be made up of 100 x 44 x 1.5mm including 5mm thick plain sheet glass ordinary quality (Modi/Atul) including all necessary suitable wheel rollers, handle, hinges, screw, jointing cleats, rubber packing, Aluminium snap beading and one No 200mm long Aluminium tower bolt, 100 mm long 3 Nos Aluminium hinges B-21 type and one No Mortice lock 100mm size 4 lever (vertical type) and hydraulic door closure for each shutter complete all as specified and directed.

S&F powder coated (minimum thickness of powder coating 50 micron) anodized aluminum window shutter three track sliding type three track section having frame size Bottom with outer 92 x 45.50 x 1.50 (section code 20617), Top & side 92 x 31.75 x 1.50 (section code 20831) and aluminum section of shutter Top & bottom size 40 x 18 x 1.55 (section code 20736), interlock size 40 x 18 x 1.45 (section code 20737) side/middle size 40 x 18 x 1.55 (section code 20738) including necessary joining cleats, glazing clips, glazing clips rubber backing, anodized aluminum snap beading screw anodized aluminum fitting complete and including glazing by using 5 mm thick plain sheet glass and stainless steel wire mesh of dia 0.36 mm and aperture 1.4 mm complete all as specified and as directed. Refer drg No LZ/C-TD/151 sheet No 1/2 and 2/2. Note:- 1. Glazed shutters glass thickness not less than 5.00 mm and SS wire mesh shutter with SS wire mesh Grade 304 (SS) as approved by GE shall deemed to be included in quoted rate and No extra payment will be made separately. 2. No extra payment for variation in section will be made for section profiles of higher sizes.

S&F Framed work such as Anodised aluminium grills,(anodised transprant or dyed to required shade according to IS 1868 with minimum anodic coating off grade AC 15 ) of approced design/pattern with approved standard sanction and fixed to the existing window frame with c.p brass /stainless steel screw @ 200 mm centre to centre including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening all complete all as per direction of engr in charge

S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30 mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately)

Supply and Fixed Providing 30mm thick FACTORY MADE WIRE MESH SOLID WPC DOOR SHUTTER consisting of Density 650 Kg /Cbm Manufactured by an ISO-9001-2015 certified Company , Door to be panelled with SS mosquito Mesh and XTN aluminium Mesh for additional strength and safety purpose. (confirming as per IS:4020). The door should be water proof, termite proof, fire retardant and having screw holding capacity. Door to be fixed to frame with 3 nos. M.S powder coated butt hinges size 100mm*25mm*2mm and 32mm long steel screws drilled suitable to pass through both the walls of the M.S tube.Other hardwares should be fixed with 19*6mm size steel screws etc. Complete as per direction of Engineer-in -charge, manufacturer's specification & drawings.complete all as specified and directed by Engr -In - Charge. approved by Engr -in -charge.

S & F 19mm thick factory made 100% solid WPC flush shutter (for cupboard and vanity etc) made from co-extruded three layer rigid foamsheet single extruded with 0.8 to 1mm thick outer layer having density not less than 1400Kg/Cum and density of center core not less than 600 Kg/Cum, with prelamination on both front (decorative) and back (white) side manufactured by and ISO 9001.2015 certified company complete all asspecified and directed.

S & F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4 mm fixed with stainless steel wire staples or with necessary beads complete all as specified and directed.

Material and Labour for 4 mm thick plain sheet glass ordinary quality including glazing with putty area n.exc 0.5 sqm in each pane complete all as specified and directed.

Supply and Fixed Box type steel window comprise of tubler frame &double shutters made out of 1.2mm thick MS sheet tube facing made single size shutter , glass, glaged shutter (glass panes and wire mesh only shall be made and paid seprately ) with side hung shutter,with steel handle steel, peg stay peg stay steel, dovetailed or welded including two nos of Tower bolt 150mm for each leaf and 10mm sq bars grills at specing as shown on drawing or directed by Engr - in - charge welded to FI frame work including other fitting hinges handles ,tarrd hold fast, PCC block etc complete all as specified and directed by Engr -In - Charge. approved by Engr -in -charge.

Material and Labour for preparation of new or previously untreated surface of steel surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed

Material and Labour for preparation of old surface of steel of any description over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed

Material and Labour for preparation of new surface of wood or wood based materials of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed

S & F 150mm long alumunium anodised barrel tower bolts of extruded section complete all as specified and directed

S&F 150 mm long Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified

S&F 250 mm long Brass, sliding door bolt with sand or die-cast brass hasp,staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete, all as specified.

S&F 8 to 10 mm dia anchor fastner of lentgh ecx 75 mm but n. exc 150 long including drilling holes in concrete/masonary walls/ stucture using electrically operated drill machine compete all as specified and directed at site.Note-Rate quoted includes cost of one 3 mm thick GI washer and one hexagonal GI nut per bolt.

S & F stainless steel Butt hinges "medium weight" steel 100mm size as directed.

S & F MS Butt hinges "medium weight" steel 100mm size as directed.

Supply and fixing 100mm size hasp and staple aluminium anodised including bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F Auto concealed Hinges SS size 103mmx64mmx28mm suitable for cabinet and wardrobe complete all as specified and directed

S & F alumunium handle fabricated type anodised 150mm long as directed.

S & F Brass handle fabricated type 150mm long as directed.

S & F Brass handle fabricated type 75mm long as directed.

S & F in repair Aluminium (Die cast) body Door closer hydraulically regulated designation No 3 universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed

S & F aluminum alloy anodized sliding door bolt 250mm long with hasp and staple (bolt type) and fixing clip of sheet and cast in extruded section and fixing bolts and sliding bolt of extruded section complete all as specified.

Demolition of Cement concrete (unreinforcde) in ground floor and paving n exc 15cm thicknes and below or above ground level complete all as specified directed

M & L for 75mm thick PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base etc. complete all as specified and directed

M&L for Providing and laying 60mm thick factorymade chamfered edge cement concrete paver block of M-35 grade with approved colour,design & pattern as in footparth, parks,lawns, drive ways or light traffic parking etc.,ength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand;

M & L Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in with grey cement & no pigments over Screed bed or bedding layer of mortar 15 mm thick in Cement mortar 1: 4 for laying floor finishes complete all as specified and directed.

S & F for rotational moulded double layered polyethylene water storage tank cylindrical, hoisted & fixed in position all as specified capacity 500 ltrs including dismantling of tank including 20mm dia ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball & fixed complete all as specified and directed.

S & F in repair glass corner shelves fancy type 6mm thick 250x250mm size and fixed over CP brass brackets all as specified and directed by Engineer-in-charge.

S & F in Soap dish CP any size complete all as specified and directed.

S&F angle valve/ stop valve 15mm bore, fancy type, cast copper alloy, chromium plated with long shank and cup screwed down, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

Supply and fix Gun metal gate valve with iron wheel hand screwed both ends, complete for size 15 mm bore including connecting materials complete all as specified and as directed

M & L Health faucet Brass chromium plated suitable for 15 mm dia pipe with 1.25 metre long flaxible tube and ABS wall hook including making connection and fixed in position complete all as specified and directed.

S & F in repairs 15mm bore, fancy type shower rose, chromium plated complete all as specified and directed.

S & F in repair 15mm bore PVC connection 450mm long with PTMT nuts and washer as directed.

S & F in repair for CP bib taps 15mm fancy type Chromium Plated cast copper alloy with crutch or butterfly handle complete all as specified.

S & F for CP bib taps 15mm fancy type Chromium Plated cast copper alloy with crutch or butterfly handle complete all as specified.

S & F in repairs Tubular Towel Rail 20mm dia. 'D' type, 600mm long of CP fixed with and including Chromimum plated brass screws and wooden/plastic cleats.

S & F in repair looking mirror fancy type decorative pattern 8 to 10 mm thick fixed on wall with stainless steel studs complete all as specified and directed.

S & F in repair PVC valveless syphonic action dule type type flushing cistern, low level white with inlet ball valve, float and handle including brackets complete all as specified and directed.

S & F in repairs vitreous china wash hand basin white flat back size 550x400mm incl 02 Nos angle iron bracket 40x40x5mm bracket CP waste coupling,and 32mm dia PVC waste pipe, complete all as specified and directed.

S&F in repair Vitreous China squatting pan, 'Orissa pattern', size 580x440mm, white, with integral foot rests including PVC 'P' or 'S' trap, excluding flushing cistern and flush pipe, including connection to trap and flushing pipe etc. and making good to floor complete all as specified and directed.

S&F in repair vitreous china under counter type Wash basin, white, oval shape of size 555x425mmx195mm including CP waste coupling and 32mm dia waste pipe etc. complete all as specified and directed.

S & F in Repair Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) basin only including connections to flushing pipe and outgoing pipes, spreader fixed in repairs complete all as specified and directed.

S & F GI tubing 15mm dia medium grade galvanised with all fittings fixed to wall and in floor including taking dowm complete all as specified and directed

S & F GI tubing 20mm dia medium grade galvanised with all fittings fixed to wall and in floor including taking down complete all as specified and directed.

Taking down and Refixing 15mm old steel tubing and connections in new or old positions (walls, ceiling, floor etc) including fittings (new or old serviceable) required complete all as specified and directed.

Taking down and Refixing 20mm old steel tubing and connections in new or old positions (walls, ceiling, floor etc) including fittings (new or old serviceable) required complete all as specified and directed.

M & L for cutting and chaseing in brick wall for concealed GI tubing and making good in CM 1:4 n.exc 10 cm in girth complete all as specified and directed

S & F in repair 100 mm dia Nahani trap with grating including jointing to waste pipe fixed in cement concrete complete all as specified and directed.

S & F in repair 75 mm dia Nahani trap with grating including jointing to waste pipe fixed in cement concrete complete all as specified and directed.

S&Fixed in repair of vitreous china water closet pedastal pattern with seat cover white and flushing pipe 32 mm di for low level flushing cistern (excluding flushing cistern & flush pipe).complete all as specified and directed

S & F in repair for 15 mm bore CP pillar taps fancy type screwed down high pressure with long shanks and fly nuts screwed for iron pipe Hot or Cold with long screwed and fixed complete all as specified and directed

S & F in repairs stop cock (concealed type) cast copper alloy screwed down high pressure with crutch or butterfly handles screwed both ends for iron pipes or for unions and fixed of 15mm bore complete all as specified and directed.

S & F in repair Stainless steel curtain rod of 25mm dia of as approved e includingSS bracket/wall to wall including latto on each end complete all as specified and directed.

M & L for 15 mm thick rendering in CM (1:6 ) on fair faces of brick wall or concrete surfaces finished even and smooth complete all as specified and directed.

M&L, 15mm thick rendering in CM (1:6) on fair faces of brick/concrete surfaces, finished even and fair complete with including taking down cement plaster complete all speciified and directed.

M&L, 15mm thick rendering in CM (1:4) on fair faces of brick/concrete surfaces, finished even and fair complete all speciified and directed.

M&L for applying three coats of white wash on walls including preparation of new surface complete all as specified and directed.

M&L for applying two coats of white wash on walls including preparation of old surface complete all as specified and directed.

Complete removal of existing treatment of wall ( any number of layers ) complete all as specified and directed.

M&L for preparation of old surface of walls and applying two coats of cement base paint complete all as specified and directed.

M&L for preparation of new surface of walls and applying two coats of cement base paint complete all as specified and directed.

M & L Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. complete all as specified and directed

M&L 1 mm thickwhite putty on wall (two or more coats)complete all as specified and directed

M & L for preparation of old treated surface of wall and applying one coat of oil bound distemper complete all as specified and directed.

M & L for prepration of old surface of walls by washing rubbing and applying Two coat of cement based paint over a coat of over a coat of alkali resistant priming paint complete all as specified and directed. .

M & L for prepration of New surface of walls and applying Two coat of cement based paint over a coat of over a coat of alkali resistant priming paint complete all as specified.and directed.

M & L for PCC 1 : 4 : 8 type D2 Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; internal dia of pipe 150mm complete all as specified and directed.

M & L for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors internal dia of pipe 110mm complete all as specified and directed.

M & L for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors internal dia of pipe 150mm complete all as specified and directed.

S & F PVC Pipes 75 mm bore single socketed in , any length in trenches or in floors including braking of pipe. Excavation etc complete all as specified and directed.

M & L for Plain Cement concrete Type D2 1:4:8 (40 mm graded stone aggregate) as in foundations, filling and mass and sloping floor concrete complete all as specified and directed

M & L for Plain Cement concrete Type C2 1:3:6 (40 mm graded stone aggregate) as in as in surface channel , benching of mamhole/drain including necessary form work /mould etc complet all as specified and directed

Cutting into existing man holes for connection new drains internal dia of pipe 150 mm, making good to pipe and rendering cutting out existing benching for and forming branch channels (1/2 round or 3/4 section) min cement concrete 1 : 2 : 4 type B1 smooth finished and reforming benching complete all as specified and directed.

M&L for cleaning of sewer line 100 mm , 150mm , 200mm bore pipe, of any depth, of any location, manhole of any depth, section, size between the sewer lines sewer line to septic tank/soak well/sump well by means of sewage sucking machine or by way of any other suitable means including disludging foreign material, sand, ashes, fibre, silt, grease, night soil, etc and removing the taken out sludge/material out side MD land by any means/source keeping the sewage line functional of the pipe lines, complete all as specified and directed.

Demolition of old unserviceable septic tank filling with earth /demolished material and provn of septic tank for 100 users , excavation in any type of soil , ,PCC 1: 4 : 8 below foundation , Brick work in CM 1 : 4 , RCC Slab M-25 baffle wall including vent Shaft manhole opening as shown on drg & disposal of material up to a distance of 50mtr and making necessary connection after cutting into existing sewer line/manhole to make it functional complete all as specified and directed. Drg No TD/750, Sheet No 1/1,1/2

Soakage wells excavation in any type of soil, foundation in PCC 1:3:6 walls of honey combed masonary with top ring of concrete including intercepting chamber and screen chamber made of brick masonary inCM,RCC cover slab M-25 in SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 2.4m dia x 3.0 M effective depth complete all as specified and directed Drg No TD/576 sheet 1/1, 1/2

S&F 1 st class Hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered,put together with glue pinned at joints, supplied and fixed

S&F 1 st class Hard wood 35 MM thick glazed and skeleton shutters, dvided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, with edges of sash bars and framing moulded any numbers open rebated and prepared to receive glass,gauze, etc. (without sash bars), edges of framing plain,chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats

M & L for preparation of new or previously untreted Surfaces of any description, over 10cm in width or girth applying a under coating with finishing coat of synthetic varnish complete all as specified and directed.

Taking down carefully copper/aluminium point wiring(light, fan,socket or power) complete with fittings such as switches, sockets, ceiling rose,fan regulators, sketch light fittings, and making good the disturbed surface of walls and floors etc as directed.

Taking down carefully main switches DB's/ MCB DB's and making good the disturbed surfaces of walls as directed.

Taking down carefully copper/aluminium sub main wiring/ service connection including teak wood batten/ conduit and making good the disturbed surface of walls as directed.

M&L, Point wiring for One light/fan point controlled by one switch using approved colour coding as per IS (Red, Black and Green for single phase circuits), with multi-stranded copper conductor 1.5 Sq. mm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLS cable 1100 volts grade, ISI-694 marked with valid CML No. in and including medium grade PVC concealed conduit and conduit accessories concealed in wall/roof/floor etc, ISI marked with valid CML No.(IS-9537-1983 for conduits and IS:3419:1976 for conduit accessories), with mild steel/pressed steel sunken boxes (with earth dolly) duly painted with two coats of anti corrosive paint/aluminium paint over a coat of red oxide primer internally, and two coats of black bituminous paint over a coat of red oxide primer externally, covered with 3 mm thick plastic laminated sheet cover for fixing of switches, sockets and fan regulators etc, including PVC insulated multi-stranded copper conductor 1.5 Sqmm nominal cross sectional area single core F.R.L.S. cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed.

All as item no 125 One socket outlet point 5 Amp on an independent board

All as item no 125 but on the same board with other switch.

All as item no 125 herein before but using 2.5 sqmm , PVC insulated, stranded copper conductor single core cable for one 3 pin 15/20 Amp socket out let point on an independent board.

S & F switch piano flush button single pole one way 5 Amp 240 volt complete as directed.

All as item no 129 but using 15 Amps complete all as specified.

Supply and fix socket outlet 2 in 1 , 3 pin, 06 & 16 Amp , flush type , 230 volt complete all as specified and directed. switch piano flush type, 16 Amp, single pole, one way, 230 Volt complete all as specified & directed.

S & F socket outlet flush type 5 pin 5 Amps 240 volts complete as directed

S & F ceiling rose surface bakelight two to three terminal complete as directed

S&F angle type holder insulated body with back plate suitable for batten fittings as directed.

S&F fan regulator electronic, step up socket type, 230 volt and conection complete all as directed

Supply and fixing in repairs LED lamp 7/9 watt, complete all as specified and as directed.

Supply and fixing wall/surface mounting luminaires (Mirror Light) integrated LED Batten( 2 feet) 10/12 W, 6500 K, 230V ,100 lumens/watt,with extruded aluminium housing & integrated electronic driver complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrangements all as per specified and directed by Engr-in-charge.

Supply and Fixing wall/surface mounting luminaires integrated LED Batten 20 W, 6000 K,100 lumens/watt , 230V with extruded Aluminium housing 4 feet long with frosted PMMA/PC diffuser & integrated electronic driver complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrangements all as per specified and directed by Engr-in-charge.

S&F in repairs of reccessed type square LED 10/12W downlighter 6500K 2.5 KV inbuit surg protection minimum 110 lumens/watt, 50k burning hours aliminium PDC all as per specified and directed.

S&F in repairs of surface type square LED 10/12W downlighter 6500K 2.5 KV inbuit surg protection minimum 110 lumens/watt, 50k burning hours aliminium PDC all as per specified and directed.

Supply & fixing bulk head light fitting made from cast aluminium body with heat resistance pressure die cast housing, IP-65 protection cover suitable for bulk head fitting integrated type 6.5 W LED, 6000K , 105 lumens/watt including inbuilt electronic driver complete all as specified and as directed.

S&F in repair LED Building security light 24/25 Watt with high power LED source (>110lumen/watt) PDC housing, IP65 and IK 07 with 4 KV inbuilt surge protection potted driver including Electrical connection with PVC three core copper flexible wire & all necessary fixing accessories such as bracket of GI pipe light grade 40 mm dia 0.60 mtr long bend to shape as per suitable size along with all accessories, fixed on wall including bolts & nuts.

S&F in repair super bright LED (2X2), 36 W, 6000 K recess mounting with high efficent LED source with all electric connetion arrangement all as per specified and directed.

M&L for two single core PVC insulated FRLS cable 6 sq mm nominal cross sectional area stranded copper conductor and one single core green PVC insulated 6.0 sqmm stranded copper conductor earth continuity FRLS cable drawn through PVC conduit 20/25 mm dia including all conduit and fixing accessaries concealed in wall including cutting chases in wall and making good disturbed surface to match of walls /ceiling complete. (Note-The cost of PVC pipe and accessoried shall be deemed to be included in the quoted rate)

M&L for two single core PVC insulated FRLS cable 4 sq mm nominal cross sectional area stranded copper conductor and one single core green PVC insulated 4.0 sqmm stranded copper conductor earth continuity FRLS cable drawn through PVC conduit 20/25mm dia including all conduit and fixing accessaries concealed in wall including cutting chases in wall and making good disturbed surface to match of walls /ceiling complete. (Note-The cost of PVC pipe and accessoried shall be deemed to be included in the quoted rate)

M&L for sub main wiring with 2.5 Sqmm nominal cross sectional area, two single core, 1100 volt grade multistranded, PVC insulated, unsheathed, FRLS copper conductor cable with and including continuous earth wire of size 2.5 Sqmm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed , FRLS copper cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit accessories concealed into wall by cutting fo chases in wall and making good to the disturbed surfaces to match the existing surface, sunken box, hylem sheet suitable for fixing of 15 Amp swith and socket complete all as specified and directied.

S & F MCB DB TPN 4 Way (Vertical Type) double door, for mounting, MCBs, isolator, ELCBs etc factory made, confirming to IS: 13032 fabricated out of CRCA sheet not less than 1.2 mm thick fitted with DIN channel, neutral link and 200 Amps rated bus bar , DBs shall be semi glossy finished with epoxy polyester based powder paint sprayed and backed at high temperature, between powder paint process the sheet steel having to go through the anti rust conditioning in not less than seven tank process to ensure smooth finish and protection against corrosion atmosphere. The DBs shall be double door type with hinged door with locking arrangement. The DBs shall be of same make as MCBs /Isolator. DB shall also be provided with label marking indicating the incoming and outgoing circuits on all way as specified. The DBs shall be of IP 42 protection class.

S&F in repairs MCCB 4 Pole, 415 V, fixed type, 100 Amps with breaking capacity 16 KA complete as directed.

S&F in replacement sheet metal enclosure for DB’s when MCB, to be used, SPN, 12 ways 240 volt with 200 Amps rated bus bar made out 1.2mm thick double door complete all as specified. (MCB required to be fixed shall be paid for separately under respective items of this Schedule ‘A’)

S&F MCB SPN 32 to 63 Amp 240 volts 10 KA breaking capacity complete as directed.

S&F MCB SP 10 to 32 Amp 240 volts 10 KA breaking capacity as directed.

Supply and fixing modular ac box power unit with socket plug top and MCBs with a two pin and one pin for earth plug and socket complete with one single pole MCB 20 Amp complete all as specified.

S&F BLDC ceiling fan 1200 mm sweep with powder coated aluminium blades min air delivery 220 m³ /min, power consumption 26/28 watt, star rating (BEE) 5 star, 350 RPM with down road as per site requirement along with connected accessories incl provn of connection with three core flexible copper cod of size 1.5 sqmm from ceiling rose to fan min 2 year product warranty and 05 year motor warranty including disconnecting and taking down old unserviceable ceiling fan and deposited in AGE E/M (W) store (yard) complete all as specified and directed.

Supply and fixing exhaust/fresh air fan 230/240 V of size 250 mm sweep (PVC body) 1100-1325 RPM with louvers including provn of flexible three core cable from ceiling rose to terminal for making connection , fitting on wall including all necessary fixing accessories complate all as specified and as directed.

Supply & Fixing of stationery storage type electric BEE five star rated Hot Water Geyser of capacity 25 Ltr to operate on 230 volt AC supply,vertical type, white in colour, working pressure min 08 Mpa with glass lined coated tank, magnesium anode, adjustable thermostat, enamel coated incology heating element 2 KW, ABS plastic body,incl 15 Amp plug top, 230 volds, 50 Hz, Product warrancy-2 years, Heating element warranty -4 years, Inner Tank warranty -7 years, including 2/4 Nos full threaded fastnar of size 100 x 10mm with nuts and 2 Nos washer complete all as specified and directed.

S & F 600 mm long steel connection pipe hot series with both side nut with rubber washer suitable for 25 Ltr geysers all as specified and directed.

M & L for cutting GI pipes and reducing to required length of dia 20/15 mm bore and inserting Tee of suitable size complete all as specified and as directed

Supply, laying and testing XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 35 Sq mm 3.5 core complete all as specified and directed.

Supply, laying and testing XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 Sq mm 2.0 core complete all as specified and directed.

Excavation in trenches in soft/loose soil n.exc 1.5M wide and n. exc 1.5 M depth and getting out, including framing bottom surface for laying cables and all as specified

Returning, filling in soil watering and ramming into layers of 25cm after laying of cable all as specified and directed.

Removal of excavated soil to a distance n. exc 50M and depositing where directed at a level not exc 1.5M above the starting point complete all as specified and directed.

Removal of excavated soil to a distance exc 250 but n. exc 500M and depositing where directed at a level not exc 1.5M above the starting point complete all as specified and directed.

M&L for sand cushioning to UG cables (8 cm deep before laying of cable and 15cm deep over the cable) all as specified and directed

Supply & Laying sub class `B’ bricks old sizes over the HT/LT cable laid flat for protection of cable all as specified and directed.

M & L for Earthing complete with glavanised steel earth plate elactrode 600x600x6 mm thick buried directly in ground with top edge of the plate not less 1.5 mtr deep below with top edge of the plate not less 1.5 mtr deep below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of nut , bolt, check nut and washer of galvanised iron or of steel, earth lead protected by 15 mm dia GI pipe light grade watering pipe 20 mm dia GI light grade GI wire meshed funnel alternate layer of charcoal and salt PCC chamber , reassed for and including RCC cover including all necessary excavation and earth work, earth wire connected to main switch board, testing the earthing after completion all as specified and shown in electric plate no 5 of MES SSR Pt-I 2009 print and as directed.

suniltraders

M/s SKP CONSTRUCTION