PROVISION OF NEW GD ROOM WITH ATTACHED TOILET CUM BATHROOM AND ALLIED WKS AT 41 VEH COY, TILING AT 08 X OR MD ACCN B-207 TO B-214 AT B BLOCK CONSTRCTION OF TOILET AT NOI UNDER 222 ABOD AT NARANGI MIL STATION UNDER GE NARANGI

Surface dressing not exc 15 cm deep and getting out in soft/loose soil complete all as specified and directed.

Excavation in trenches not exc 1.50 m wide and not exc 1.50 m deep for foundation or for shafts, wells cesspits,man holes etc not exc 10 Sqm on plan and n exc 1.5m in depth and getting out in soft / loose soil complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed.

Removing of excavated soil not exc 50cm & depositing where as directed at a level n.exc 1.5m above starting point complete all as specified and directed.

Material and labour for hardcore of gauge n exc. 63mm with broken stone or boulders, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface.complete all as specified and directed.

Material and labour for sand filling under floors or in foundation including watering and consolidation complete all as specified and directed.

Material and labour for PCC 1:4:8 type D2 (using 40mm grade stone aggregate) as in foundation /mass concrete complete all as specified and directed.

Material and labour PCC 1:3:6 type C0 (using 12.5mm graded stone aggregate ) as in filling of hollow steel frames of any size complete all as specified and directed.

Material and labour for RCC M-25 (20mm graded stone aggregate) design mix as in Foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc, basement slabs, under-reamed piles and mass concrete etc complete all as specified and directed.

Material and labour for RCC M-25 (20mm graded stone aggregate) design mix as in column complete all as specified and directed.

Material and labour for RCC M-25 (20mm graded stone aggregate) design mix as in Beam,cantilevers, lintels complete all as specified and directed.

Material and labour for RCC M-25 (20mm graded stone aggregate) design mix as in slabs wupported on walls, beams balcolies complete all as specified and directed.

Material and labour for RCC M-25 (20mm graded stone aggregate) design mix as in chajjas complete all as specified and directed.

Material and labour for Providing precast cement concrete 1:2:4 type B1 (20mm graded stone aggregate) set in CM 1:4 in landings, cover slabs (for drains, manholes etc.) and similar articles with plain faces complete all as specified and as directed.

Supply only liquid water proofing compound of approved complete all as specified and directed.

Material and labour for brick work with old size sub class 'B' bricks straight or curved on plan exc. 6m mean radius and built in CM 1:6 etc complete all as specified and directed.

Material and labour for brickwork with subclass ‘B’ old sized bricks, straight or curved on plan to any radius in half brick thick walls and built in CM 1:4 etc complete all as specified and directed.

Material and labour for Damp proof course 40 mm thick in cement concrete 1:2:4 type B 0 to horizontal or vertical surfaces including necessary formwork and applying evenly a coat of blown type bitumen at the rate of 1.50 kg per square metre and blinding with clean dry sand @ 0.05 cu. m. per sq. m complete all as specified and as directed.

Material and labour for16-18 mm thick Granite (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window- cills,cooking platforms, working table and like over 20 mm thick screed bed or bedding layer in cement mortar (1:4), including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Material and labour for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed.

Material and labour for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; n. exc 200m thick (Horizontal or sloping) complete all as specified and directed.

Material and labour for formwork to chullah hoods, chajjas, troughs and similar items including edges complete all as specified and directed.

Material and labour for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed.

Material and labour for formwork to sides of pillars, posts, struts, piers, columns, and stanchions complete all as specified and directed.

Supply and fix 2nd class hardwood 35mm thick skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.24 (a); supplied and fitted to chowkats etc complete all as specified and directed.

Supply and fix 30mm thick flush shutters solid core construction with particle board core and plywood face panels commercial type on both side complete all as specified and directed.

Supply and fix Factory Made Solid PVC Moulded Door Shutter, with wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded prelam PVC Sheet on the front face & 2mm prelam PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.

Material and labour for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet & edges will be painted to match with prelam sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing etc complete all as specified and directed.

Refixing wooden or aluminium door shutters of any description not exceeding 2 Sqm each in the same opening after taking down, easing and adjusting including refixing builders hardware, glass etc as required and renewal of unserviceable screws complete all as specified and directed.

Supply and fix 150 mm size aluminum anodised, barrel tower bolts of extruded section etc complete all as specified and directed.

Supply and fix aluminum alloy anodised, sliding door bolts with hasp and staple, (bolt type) and fixing clips of sheets, cast or extruded section and fixing bolt and sliding bolts of extruded section or cast aluminium alloy and fixed 300mm long etc complete all as specified and directed.

Supply and fix 100mm size butt hinges, medium weight, cold rolled mild steel, and fixed etc complete all as specified and directed.

Supply and fix steel helical door spring 300 mm size rat tail rod pattern spring, including roller and roller plate complete all as specified and directed.

Supply and fix 150 mm long extruded anodized aluminum alloy handles, fabricated type, etc complete all as specified and directed.

Supply and fix 100 mm long extruded anodized aluminum alloy handles, fabricated type, etc complete all as specified and directed.

Supply and fix Stainless Steel Curtain Rod 25mm dia/bore (as approved) including fixing stainless steel Bracket(shaped as approved) not less than 80mm long to wall with Screws/ secured with stainless steel side doom(as approved) fitted/tightened on Curtain Rod at both ends with screw including taking down old curtain rod of any description and knob, complete all as specified and as directed.

Supply and fix stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc complete all as specified and directed.

Material and labour for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

Providing and fixing powder coated aluminium (minimum thicknesss of powder coating 50 micron) work for doors, windows, ventilators and partitions (fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make confirming to IS-733 and IS- 1285, fixed with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e at top, bottom and sides with required EPDM complete all as specified and directed.

Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling, C.P. brass/ stainless steel screws, locking arrangement of window, etc all complete all as specified and directed.

Supply and fix Mild steel of conforming to Fe 290 grade E-165 as framed work (Angles ,Flat Iron, square/round bars) with ends of bars shouldred and/or rivetted or forged into spikes for window grills/framed guard bars to the design and pattern of ornamental and intricate as approved etc complete all as speciified and drected.

Material and labour for TMT bar 10mm dia and over cut to length bent to shape required including cranking, bending spirally for hoping for columns hooking ends and binding with & including Mild Steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed

Material and labour for Mild steel TMT bar of 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and as directed.

Supply and fix box type steel windows with side hung shutters both mosquito proof and glazed shutter including projecting type hinges with steel handle and steel peg stay with glazing bars and 12 mm square bar or ground bar of approved design welded to steel window frame dovetailed or welded complete all as specified and as directed.

Supply and fix Steel ventilator with top hung shutter including hinges, steel peg stay, complete with glazing bars, dovetailed or welded etc complete all as specified and as directed.

Material and labour for rolled mild steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S. 1161-1998 grade St.-240 complete all as specified and as directed.

Material and labour for 1.25 mm thick mild steel pressed steel frames of size 125 x 60 mm for doors with double rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and as directed.

Supply and fix mild steel Framed work such as grills, gratings, angle iron, mild steel sheets, mild steel round bar, MS flat iron etc.. for chowkhats or doors shutters or windows etc with ends of bars shouldered and/or riveted, wlded or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and as directed.

Supply and fix Stairs (framed) including stringers, treades, landing, balusters, hand rails etc. including cleats, brackets, etc confirming to Fe 410-W (Gde E-250) complete all as specified and as directed

Supply and fix pre-painted hot dip aluminium zinc alloy metalic coated trapezoidal profile steel sheet 0.50mm thick (total coated thickness), any patteren corresponding to IS 15965: 2012 of durability class 3, four (4) coat atmospheric classification category 3, coating class AZ 150 of an approved colour havingb yield strength of 550MPa as in roof covering/wall cladding, fixed with self tapping screws as complete all as specified and as directed.

Supply and fix pre-painted hot dip aluminium zinc alloy metalic coated trapezoidal profile steel sheet 0.50mm thick (total coated thickness), any patteren corresponding to IS 15965: 2012 of durability class 3, four (4) coat atmospheric classification category 3, coating class AZ 150 of an approved colour havingb yield strength of 550MPa as in roof covering/wall cladding, fixed with self tapping screws as specified and as directed Note: To be executed for provison of ridges and hips, valley etc complete all as specifed and as directed

Material and labour for suspended false ceiling using E-grid 2430, 180 GSM (exposed ceiling suspension system ) of grid size 600mmx600 mm with main runner 32 mm x 24 mm and wall angle 24mm x 24mm using 4mm thick High Pressure stean Crude Everest Non Asbestos Fiber Cement plain Board (E-Board Classic) in & including a grid of GI system duly suspended with 4mm dia GI wire hanger fixed with steel dash fasteners or iron purlin from the roof with adjustment clip providing positions for light fixtures,air conditioning diffuser and ducts ,sprinkler ,smoke detectors etc.The main runners to be secured to structural soffits by hanger @ 1220 mm maximum c/c. the last hanger at the end of each main runner should not be placed at more than 450mm from the adjucent wall,Flush fitting 1220 mm cross tee to be interlocked between main runners @ 610mm c/c,so as to form 600mm x 600 mm grid complete all as specified and directed

Material and labour for 100 mm thick cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate )as in sub base complete all as specified and directed

Material and labour for 75mm thick cement concrete 1:4:8 type D-2, (40mm graded stone aggregate) as in subbase complete all as specified and directed

Material and labour for 25 mm thick PCC (1:2:4) type B0 (using 12.5 mm graded crushed stone aggregate) as in floor finished rough to receive tiles complete all as specified and as directed.

Material and labour for 75 mm thick PCC (1:3:6) type C-1(using 20 mm graded stone aggregated) as in plinth protection complete all as specified and as directed.

Material and labour for Forming Construction joint 30mm deep x 10mm wide filled with sealing compound grade A complete all as specified and as directed.

Material and labour for water proofing treatment to RCC roof slab, including parapet comprising with the following courses of treatment/specification from bottom to top: (i) Taking out old roof tratment and roughening tha same old concrete slab by picking, sweepingc clean and washing down with water to remove dust etc (ii) Screed bed or bedding layer of mortar 15mm thick in CM 1:4 for laying as in roof slab with mixing of WPC and surface finished fare and smooth without using extra cement (WPC shall be measured and paid seperately) (iii) Cleaning the plastered roof surface and applying one coat of cold bituminuous primer @ 0.25 ltr/Sqm confirming ti IS: 3384 -1986 (iv) APP based polymeric menbrane 3mm thick (minimum) weighing 3.5 kg/Sqm reinfiorced with polyster non woven fabric (weighing not less than 160gms/Sqm) shall be less appliedb over bituminous primer as specified above over a application of polymeric membrane shall by torch application. The overlaps shall be minimum 100mm on the teransverese direction and 75mm on longitudinal direction. (v) Applying two coat of aluminium paint over the APP modified membrane @ 0.11Kg/sqm.

Roughening surface of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified and as directed .

Material and labour for glazed ceramic coloured tiles in vertical surface 450X 300X 7mm thick with and including 10mm thick CM 1:4 backing coat, set and jointed in neat cement slurry and pointed in white or colour cement to match etc complete all as specified and as directed.

Material and labour for Non - skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) laid in floors area of each tile exc. 0.11 sqm but n.exc 0.18 sqm, in floors etc. with and incl 15mm thick screed bed in CM 1:6 , set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and as directed.

Material and labour for coloured Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc. with and including 15mm thick screed bed in CM 1:4 ,set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and as directed.

Material and labour for coloured Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in vertical surfaces such as skirting and dado, laid over and including 10 mm thick rendering in CM 1:4. complete all as specified and as directed.

Material and labour for heavy duty endura tiles of size 300 x 300 x 10 mm thick of approved make jointed in neat cement slurry, pointed in white or coloured cement to match colour of tiles, including 20 mm screedbed in CM 1:6, complete all as specified and directed.

Taking down cement plaster of any description on brick or stone walls etc including racking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

Material and labour for 5mm thick rendering in CM 1:3 on concrete surfaces in ceiling finished even and smooth without using extra cement complete all as specified and directed.

Material and labour rendering 15 mm thick on brick walls in CM 1:6 finished even and smooth wiithout using extra cement all as specified and as directed.

Material and labour for 10 mm thick rendering in CM 1:6 on brick/ concrete surfaces and finishing the surfaces even and smooth without using extra cement complete all as specified and as directed.

Material and labour 15mm thick rendering in two layers(10+5mm) externally on brick or concrete surfaces in CM 1:4 mixed with liquid WPC @ 200 ml/50kg by weight of cement or as per manufacturer instructions on top layer, finished even and smooth without using extra cement complete all as specified and directed..

Material and labour for preparation of newly plastered surfaces of wall and applying two coats of acrylic distemper over a coat of primer including 1mm thick wall care putty complete all as specified and as directed.

Material and labour for prepration of newaly plastered surface of wall, applying a coat of wall care putty not less than 1.00 mm thick and two coat of acrylic exterior weather resistant paint (weather proof paint) of tint as approved over one coat of alkli and fungal resistant primer complete all as specified and directed .

Material and labour for preparation of newly plastered surface and applying three coats of white wash on ceiling etc complete all as specified and as directed.

Material and labour for preparation of old distempered surface of wall including cornices etc. by washing, rubbing down,scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and stopping of distempered surfaces and applying one coat of oil emulsion distemper of approved shade on surface of wall complete all as specified and directed.

Material and labour for preparing of old plastered ceiling surface and applying one coats of white wash complete all as specified and directed.

Material and labour for preparation of old painted surface of wood and wood based materials by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots of any discription, not otherwise described, over 10cm in width or girth and applying one coat of synthetic enamel paint, white or tinted complete all as specified and directed.

Material and labour for preparation of old painted surface of steel and iron by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots of any discription, not otherwise described, over 10cm in width or girth and applying one coat of synthetic enamel paint, white or tinted complete all as specified and directed.

Supply and fix 3.00 mm thick sheet glass fixed in window shutters etc complete all as specified and as directed.

Supply and fix 4.00 mm thick figured glass pin headed type fixed in ventillators etc complete all as specified and as directed.

Supply and fix 4mm thick, frosted sheet glass ordinary quality and glazing, with oil putty in Squares n.exc 0.5 Sqm each complete all as specified and as directed.

Supply and fix 12mm thick toughened glass door (both side opened) fixed with steel connectors, top and bottom pivots, stoppers and other fixtures required to fix the door incl all type of locking arrangement, brass handles fancy type 300mm long hole to hole two nos complete all as specified and directed.

Material and labour for preparation of new wood surfaces exc 10 cm width/girth and applying two coats of synthethic enamel paint over a coat of primer etc complete all as specified and directed.

Material and labour for preparation of new steel surfaces exc 10 cm width/girth and applying two coats of synthethic enamel paint over a coat of primer etc complete all as specified and directed.

Material and labour for 15 mm bore of tube medium grade Galvanised steel water tubing with all fittings and fixed complete to walls, cutings or laid in floor including taking steel tubing with connections etc complete all as specified and directed.

Material and labour for 20 mm bore of tube medium grade Galvanised steel water tubing with all fittings and fixed complete to walls, cutings or laid in floor including taking steel tubing with connections etc complete all as specified and directed.

Supply and fix 1000 litres capacity rotational moulded polyethylene water storage tanks with 20mm bore ball brass valves, high pressure, with polyethylene float and fly nut (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I etc complete all as specified and directed.

Supply and fix 15mm bore bib taps, chromium plated cast copper alloy quarter turn long body screwed down, screwed for iron pipe etc complete all as specified and directed.

Supply and fix 15mm bore pillar taps, chromium plated cast copper alloy quarter turn long body screwed down, screwed for iron pipe etc complete all as specified and directed.

Supply and fix 15mm size fancy type chromum plated Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed etc complete all as specified and directed.

Supply and fix conealed stop cock with sheet flange cast copper alloy, screwed down high pressure, with crutch or butterfly handles for 15 mm bore pipe or for unions complete all as specified and directed.

Supply and fix stop valves or two way angle cocks, cast copper alloy concealed type reduced Body with Adjustable Wall Flange screwed down high pressure, screwed both ends for 15 mm bore iron pipe or brass ferrule complete all as specified and directed.

Supply and fix Angle Stop valves, cast copper alloy screwed down, high pressure, with capstain head chromium plated, fancy type, screwed both ends for 15mm bore of iron pipe or for union and fixed all as specified.

Supply and fix Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 mtr long flexible tube and ABS wall hook including making connection and fixing in position complete all as specified and directed.

Supply and fix 20mm bore gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe etc complete all as specified and directed.

Supply and fix 15mm bore chromium plated swivel type shower rose with arms complete all as specified and directed.

Supply and fix fancy type Brass chromium plated 600mm long Towel Rod 'D' type fixed with screws and wooden/plastic cleats etc complete all as specified and directed.

Supply and fix PVC connections 15mm size with PTMT nuts of length 450mm etc complete all as specified and directed.

Supply and fix 32 mm dia PVC waste pipe including necessary coupling complete all as specified and directed.

S & F PVC (SWR) 110 mm pipes single socketed in any length with rubber ring joints , laid in trenches or in floors complete all as specified and directed.

Supply and fix 110mm bore of pipe PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls etc complete all as specified and directed.

Supply and fix 110 mm bore of pipe PVC (SWR) plain bends any radius etc complete all as specified and directed.

Supply and fix 75 mm PVC bore soil waste and vent pipe in any length with or without ears laid in floor complete all as specified and directed.

Supply and fix 75 mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

Supply and fix 75 mm dia PVC (SWR) bends of any radius complete all as specified and directed.

Supply and fix 75mm dia PVC (SWR) vent cowl, complete all as specified and as directed.

Supply and fix Grating doom 100mm dia of stainless steel ( Minimum weight 25gm ) complete all as specified and directed.

Material and labour for PCC 1:4:8 type D-2 ( 40mm graded stone aggregate) as in concrete bed to drain pipe 110/150 mm dia including packing under , and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

Supply and fix PVC (SWR) 110mm bore pipes single socketed, in any length with rubber ring joints, laid in tranches or in floors including haunching complete all as specified and directed.

Material and labour for cement concrete (1:3:6) type C-2 (using 40mm graded crushed stone aggregate) as in concrete bed to drain pipe including packing under and haunching against the sides of pipe after they are laid and tested in cement concrete bore of pipe 110mm complete all as specified and directed.

Material and labour for RCC Septic tank designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, RCC M-30 Design Mix in Walls , Base Slab , Baffle walls and Roof Slab including beams etc with Vent shaft , manhole openings with cover connection etc., complete with effective depth of 1.5 meter and overall depth of 3 meter for 10 user complete all as specified and directed.

Material and labour for Soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 1.2 M dia X 1.5 M effective depth complete all as specified and directed.

Supply and fix 75 mm dia PVC(SWR) floor trap/nanhi trap, plain with grating including jointing with solvent cement complete all as specified and as directed

Supply and fix floor mounted trap EWC rimless bowl with side flush cistern for coupled WC, slim soft close seat cover, hinge signal flush cistern water closet (padestal pattern) including connection to drain (or outgoing pipe) and flushing pipe, anti syphonage pipe, trap set etc complete all as specified and as directed.

Supply and fix Vitreous China bowl urinal flat back, size of 380X405X590 mm white (minimum), along with all fittings like spreader, grating, connection pipe and union for discharge pipe complete all as specified.

Supply and fix vitreous china table top wash hand basin, white/coloured table top size 460X315X135 mm including necessary CP waste coupling suitable for wash hand basins, with long screwed shanks and fly nuts & PVC waste pipe) complete all as specified & directed.

Supply and fix stainless steel soap disc wall mounted fixed to wall with necessary items complete all as specified and directed.

Supply and fix curved urinal glas partition of size 950 mm x 450 mm x 12 mm thick including all necessary fittings to fixed in wall complete all as specified and as directed.

Supply and fix viterous china squatting pan, `Orissa' pattern, size 580 x440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) white coloured etc complete all as specified and as directed.

Supply and fix viterious china wash basin white coloured flat back size 550x400mm, outlet of 32mm bore HDPE outlet pipe with necessary fittings, 32mm bore brass CP waste couplings etc complete all as specified and as directed.

Supply and fix PVC valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle, including brackets etc complete all as specified and as directed.

Supply and fix fancy type Brass chromium plated soap dish fixed with screws and wooden/plastic cleats etc complete all as specified and as directed.

Material and labour for PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and as directed.

Material and labour for point wiring with 1.5 sqmm, single core, PVC insulated and PVC unsheathed FR-LSH cable, 1100 volts grade IS-694 marked, with multistranded copper conductors and earth continuity wire with 1.5 Sqmm copper conductor cable (including connecting to earth dolly) laid/fixed with and including PVC rigid conduit on walls/ceiling (concealed), with MS/PVC terminal boxes fixed flush with wall surface with 3mm thick masonite laminated sheet top cover fixed with brass screw for mounting switches, sockets, regulators etc. including 1.5 sqmm single core PVC insulated and unsheathed copper conductor earth continuity conductor to common earth and connecting to earth dolly for one light or fan point controlled by one 5 Amp switch one way complete all as specified and as directed.

All as per item serial No 123 here-in-before but One 3 pin socket outlet 6 amps on the same board with other switches complete all as specified and as directed.

All as per item serial No 123 here-in-before but One socket outlet 3 pin 6 Amp on independent board complete all as specified and as directed.

All as per item serial No 123 here-in-before but with 2.5 Sqmm single core multistranded copper conductor cable for 6 pin 15 Amp socket outlet on independent board and earth continuity wire with 2.5 sqmm cable complete all as specified and as directed.

Supply and fix switch modular type 6 Amp 240 Volts single one way (ISI marked) complete all as specified and as directed.

Supply and fix modular socket, 6 Amp 2/3 pin combined, 2 module complete all as specified and as directed.

Supply and fix modular switch 1 way 16 amp, 1 module complete all as specified and as directed.

Supply and fix modular socket, 16 Amp 2/3 pin combined, 2 module complete all as specified and as directed.

Supply and fix stepped type modular electronic fan regulator, two module size, flush type complete all as specified and as directed.

Supply and fix ceiling rose, 3 phase/PVC/polycarbonate, isolated body complete all as specified and as directed.

Supply and fix modular lamp holder ,PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

Supply and fix LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative batten type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

Supply and fix LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed/surface type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed.

Supply and fix MCB DB of sheet metal enclosure IP -43 double door SPN 4 way with 200 A rated bus bar and grouted in wall with PCC(1:2:4) type B-1 using 20 mm graded stone aggregate complete all as specified and as directed.

Supply and fix for factory made, sheet steel distribution boards, TPN, 4 Way, IP -43 double door,with provision for FP MCB as incomer and SP MCBs as outgoing complete and grouted in wall with PCC(1:2:4) type B-1 using 20 mm graded stone aggregate complete all as specified and as directed.

Supply and fix MCB Tripple pole & neutral 40 to 100 Amps in accordance with IS/IEC 60898-1, 415 V, 50 Hz,10 kA,C-series rupturing capacity providing in DB complete all as specified and as directed.

Supply and fix MCBs, SP 6 to 32 Amps In accordance with IS/IEC 60898-1, 240 V, 50 Hz, 10 kA ,C-series marked fixing in DBs (DBs catered separately in this Schedule) complete all as specified and as directed.

Supply and fix MCBs, SPN 32 Amps In accordance with IS/IEC 60898-1, 240 V, 50 Hz, 10 kA ,C-series marked fixing in DBs (DBs catered separately in this Schedule) complete all as specified and as directed.

Earthing complete with GI earth plate electrode of size 60cm x 60cm x 6mm buried directly in ground vertically at a depth not less than 2.25 metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level sorrounded from all sides by 15cm thick and packed layer of charcoal dust and common salt fliing in alternate layers etc and connected to and including galvanised earth lead wire 4 mm upto 7.5 mtr by means of bolts, nuts, check nuts and washers made of galvanised iron and protected by light grade 20 mm dia GI pipe connected to main control board and GI pipe medium grade 40 mm bore for watering and including funnel, wire mesh, charcoal salt etc RCC pit cover flush to earth pit 50mm thick reinforced with 8mm TMT bar 100mmC/C and PCC chamber pit with PCC (1:3:6) type C1 (using 20mm graded aggregate) including excavation and earthwork disposal of surplus soil to distance not exceeding 50 metre) and testing after completion all as specified and shown on plate No 3 of SSR Part-I 2009

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm complete all as specified and as directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep, 1400 RPM with blades, and frame and louvers complete all as specified and as directed.

Supply and fixing ceiling fans complete with blades, down rods, and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.

Supply and fixing LED building secruity light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed.

Material and labour for building secruity light bracket made out of 40 mm bore light grade GI Pipe with two sets clamps, with nuts and bolts, bend to shape for fixing street light luminaries all as directed, length of GI Pipe shall not be less than 2.0 mtrs complete all as specified and directed.

Supply and fix steel tubes medium grade galvanised 25 mm bore with all fittings and fixed complete to walls and ceilings and laid in floors complete all as specified and as directed.

Supply and fix Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed 25mm bore complete all as specified and directed

Material and labour for cutting existing steel tubing of 40mm for alterations or additions complete all as specified and directed

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16.0 sq mm 4 core complete all as specified and directed

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10.0 sq mm 2 core complete all as specified and directed

Supply and spreading clean dry river sand in cable trenches as in cable cushioning complete all as specified and as directed. (Note: Punned thickness shall be measured and paid)

Material and labour for bricks sub class ‘B’ brick old size for cable protection laid in flat in trenches over the cable perpendicular to the direction of cable complete all as specified

Please Enable Macros to View BoQ information