Supplying erecting and repairing of electrical work and Equipments of municipal council Chalisgaon for year 2022-23

Amount

Supplying erecting and repairing of electrical work and Equipments of municipal council Chalisgaon for year 2022-23

Supplying 1.5 Sq mm wire Bundle (2CORE) 90 Mtr

Supplying 2.5 Sq mm wire Bundle (2CORE) 90 Mtr

Supplying 4 Sq mm wire Bundle (2CORE) 90 Mtr

Supplying 10 Sq mm wire per meter

Supplying mains with 2x1.5 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WGMA/ BW

Supplyin mains with 2x2.5 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WGMA/ BW

Supplying PVC insulated PVC round sheathed 4 sq.mm (56 no. x 0.30 mm dia.) 3 core flexible multi stranded copper Industrial cable for voltage grade up to 1.1 kV

Supplying,cable 2 core 10 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying 6 to 32 A SPMCB suitable to fix in 1 module of modular switch in provided box complete & duly concealed with necessary material and connected.

Supplying 40A to 63A SPMCB suitable to fix in 1 module of modular switch in provided box complete & duly concealed with necessary material and connected.

Providing & erecting 3 Pole MCCB upto 100A, 415V, with short circuit rating 25 kA (Ics=100% of Icu ),adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact and MCCB should have phase barriers both sides, in provided enclosure on iron /GI frame as per specification no. SW-SWR/MCCB

Supplying LED 18W tube light fitting (4 feet) with polycarbonate housing, heat sink, integrated HF electronic driver complete

Supplying Fuse bridges with base HC type fuse links 240V 63A erected on polished wooden block complete

Supplying 4 pole power contactor 63 A with coil voltage of 220/240 V

Supplying 4 pole power contactor 80A-130A with coil voltage of 220/240 V

Supplying 12 V/150Ah tubular battery with battery terminal wire, duly charged complete with 36 months warranty complete

Supplying & erecting 12 V 88 Ah heavy duty plate type Battery with terminal wire duly charged complete suitable for DG set with warrantee for 3 years

Supplying quartz electronic time switch having 24 hour dial to work on 250 V 50 cycle AC having built in rechargeable nickel cadmium batteries to run the time switch on failure of supply having switch contact rating upto 16A to use independently or in conjunction with contactor.

Supplying regular/ standard model ceiling fan of 1400mm. sweep complete erected in position as per specification no. FG-FN/CF

Providing bracket fan 400 mm. sweep A. C. 230 volts 50 cycles 1350 R.P.M. Oscillating type, plastic or metal blades chrome plated guard with regulator and moisture proof treatment to winding and with ‘E’ class insulation.

Supplying, erecting & terminating XLPE armoured cable 4 core 10 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating XLPE armoured cable 4 core 4 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating XLPE armoured cable 4 core 6 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Rewinding motor of the 1200/1400 mm ceiling fan and over hauling including minor repairs lubricating of ball bearings & bush bearing, and replacing condenser, screws etc. Testing of fan for original speed and consumption with guarantee for one year.

Providing servicing of 1/1.5/2/3 TR capacity split/window air conditioning unit complete with all necessary material. Job includes checking of performance of unit, cleaning of filters of indoor unit, cleaning of outdoor unit with blower, checking of electrical connection of indoor as well as outdoor unit and submitting report to Engineer incharge.

Providing annual comprehensive maintenance contract for 1 TR split/window air conditioning unit complete as per terms and conditions. Job includes 1) quarterly servicing 2) on call repair 3) replacement of all spares within 24 hours 4) sending standby manpower for VIP movement. The job excludes sheet metal work and pastic material.

Providing flushing out cooling coil and condensor coil of airconditioner unit refrigerant pipes internally with dry Nitrogen pressure in an approved manner

Providing brazing pipes and checking leakages in the split/ window unit duly with dry nitrogen pressure in an approved manner.

Providing replacement of existing unservicable rotary/scroll compressor of air conditioner 1.5 TR by new one of same capacity with guarantee for one year with provided refrigerant complete.

Providing replacement of unserviceable starting relay for AC unit.

Providing replacement of unserviceable starting/running capacitor for A/C unit.

Providing replacement of unserviceable fan motor capacitor for A/C unit.

Providing replacement of unserviceable PCB for A/C unit upto 3 TR capacity.

Providing repair of of faulty PCB for air conditioning unit upto 3 TR capacity.

Supplying and installing of new fan motor for condenser for air conditioning unit

Supplying and installing of new fan motor for indoor unit of air conditioner up to 3 TR suitable to operate on 230V to 250V AC or 280V to 340V DC supply having 4 to 8 poles as per requirement.

Supplying and installing new fan blade outdoor unit for air conditioning unit.

Providing replacement of blower of indoor unit for air conditioning unit.

Providing replacement of remote of indoor unit for air conditioning unit.

Providing and fixing indoor plastic cabinet with all accessories

Providing vaccumising the airconditioner system to 200 micron and charging with R-22 refrigerant for 1.5TR window/split air conditioning unit.

Supplying, installing, testing and commissioning split type variable speed Inverter technology room Air conditioning unit 1.5 TR Capacity having ISEER minimum 3.50 to maximum 3.99 suitable to operate on 250V, 50 cycles, A.C. supply having 1 no. of air handling unit hiwall / floor mounting type complete with refrigerant R410 A/R32 and copper condenser at position. specification no. APAC/ SAC

Supplying and erecting PVC trunking (PVC casing-ncapping) of size 32 mm with accessories on wall/ceiling as per specification No: WG-MA/CON.

Supplying and erecting UPVC reinforced flexible conduit 31/32 mm in dia. conforming to I.S. with required number of couplings, PVC bushes, check nuts etc. complete.

Supplying and erecting HMS PVC conduit 32 mm dia. with PVC accessories on wall / ceiling as per specification No: WG-MA/CON.

Point wiring for independent plug in 20 mm ISI marked HMS PVC conduit with 1.5 sq.mm (2+1E) FR grade copper wire, flush type switch, earthing and required accessories as per specification No: WG-PW/SW

Wiring for plug on board with Switch socket, copper wiring and earthing as per specification No: WG-PW/SW

Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results as per specification no. EA-EP

Point wiring in PVC trunking (casing-capping) with 1.5sq.mm (2+1E) FR grade copper wire, flush type switch,earthing and required accessories as per specification No: WGPW/SW

Secondary point wiring for additional light/ bell point in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FR / FRLSH grade copper wire with required accessories as per specification No: WG-PW/SW

Supplying & erecting 10-12W, 230V integral type LED Lamp suitable for B-22/E-27 base.

Supplying and erecting fresh air cum exhaust fan of light duty 250 V A.C. 50 cycles 300mm. 1400 RPM rust proof body & blades, wire mesh, duly erected in an approved manner.

Supplying and erecting Ceiling rose / Batten holder /Slanting holder / hanging cord switch / hanging bell push/ pendent holder bakelite base 6A. erected on filled polypropylene board or polished double wooden block/ PVC junction box.

Supplying and erecting ISI mark modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete.

Supplying and erecting flush type shockproof plug socket 6A & 16A (6 pin) with 16A switch combined with indicator lamp and fuse with gang box on wooden board.

Supplying and erecting PVC Surface modular switch box with double mounting plate for 6 modules duly erected.

Supplying and erecting PVC Surface modular switch box with double mounting plate for 613modules duly erected.

Supplying and erecting PVC Surface modular switch box with double mounting plate for 18 modules duly erected.

Supplying, erecting & terminating XPLE armoured cable 4 core 16 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL(As per CSR 21-22 7-1-29)

Supplying & erecting G.I. pipe ‘A’ class 40 mm dia. erected for enclosing XLPE armoured cable on wall/pole as per specification no. CB-CE(As per CSR 21-22 7-6-2)

Supplying and erecting Architectural pole of 4mtr height,pole placed with a aluminium/cast iron embellishment on the bottom & middle section for aesthetic & decorative purpose,pole shall have aluminium/cast iron casting on the base middle and on the joint giving it decorative look,the base aluminium/cast iron casting shall 148OD with a height 180mm the casting will have ring on the top 20mm thickness,the middle Al/cast iron Casting shall be of conical design with bottom section of 145 OD having 3 ring of 15mm each. the conical casting shall taper for 145 OD on bottom to 92mm on top ,the pole with inbuilt junction box to fix 32 amp connectors & 6 amp MCB inside cut window of the bottom pipe with suitable size (as per attached Drawing)(Non DSR item )

Supplying and Erecting attractive/decorative type of bracket with reducer/expander for holding decorative fixture on provided main pole having all the arrangement perpendicular to ground ,the bracket type is the double Arm Shall have span with 1000mm with in the middle made of 8 mm rod with flower leaf design (as per attached Drawing)(Non DSR item )

Supplying and Erecting attractive/decorative type of bracket with reducer/expander for holding decorative fixture on provided main pole having all the arrangement perpendicular to ground ,the bracket type is the single Arm Shall have span with in the middle made of 8 mm rod with flower leaf design (as per attached Drawing)(Non DSR item )

Supplying and Erecting of decorative luminaire made of Spun aluminium body with pressure die-cast heat management(PDCHM) and the IP optical Compartment with high power LED is comprised of deep drawn chemically polished and co-extruded thransformed polycarbonate protector stabilzed agent UV rays Suitable for 40-60 W LED fitting should be hangging type mounting decorative fixture with inbuilt Driver with efficiency >0.9 and having surge protection device of 10 KVA colour temperature 3000K/4000K/5700K natural day light LED,LED to be osaram/ Cree/Bridgelux & driver to be make with philips/Fulham/osaram (as per attached Drawing)(Non DSR item)

Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq.m at 1.5 m depth including supply of steel, concrete, excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 6m to 8m high octagonal /conical GI pole).(As per CSR 21-22 16-3-9)

Supplying and laying (including excavation of suitable width & depth up to 90 cm) 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete(As per CSR 21-22 7-6-9).

Providing pipe type earthing with 40mm. dia. G.l. pipe or 20 mm dia. G.l. Rod complete with all materials as per specification no. EA-EP (As per CSR 21-22 9-1-4)

Supplying and erecting LED Flood light fitting of 90- 100W, including lamp, with PF > 0.95,class IP 65 and above Housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete per specification No FG-ODF/FLS-2 (As per CSR 21-22 2-5-16)

Supplying and erecting LED square / circular 5 to 8W down lighter having pressure die-cast aluminium housing, opal translucent cover, mounting arrangement with board for surface type or spring loaded mounting clips for flush type complete.

Supplying LED concealed type foot / step light with aluminium body for indoor/outdoor application suitable for upto 4W-6W LED including driver and erecting by making necessary arrangement/recess in wall to make it flush with surface.

Supplying LED UP down light with aluminium body for indoor/outdoor application suitable for upto 4W-6W LED including driver and erecting by making necessary arrangement/recess in wall to make it flush with surface.

Supplying and erecting LED flexible strip light 5m length upto 25W conforming IP 65 of any colour with driver complete.

Supplying and erecting GI strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint in an approved manner with joints required. As per specification no EA-EP.

Supplying and erecting electronic type Driver for Outdoor LED fittings upto 25W suitable to operate on 230V A.C. 50 Hz. Having pf>0.95 and THD<10%.

Supplying and erecting electronic type Driver for Outdoor LED fittings upto 26W-45W suitable to operate on 230V A.C. 50 Hz. having pf>0.95 and THD<10%.

Supplying and erecting electronic type Driver for Outdoor LED fittings upto 46W-75W suitable to operate on 230V A.C.50 Hz. having pf>0.95 and THD<10%.

Supplying and erecting electronic type Driver for Outdoor LED fittings upto 76W-100W suitable to operate on 230V A.C.50 Hz. having pf>0.95 and THD<10%.

Supplying and erecting electronic type Driver for Outdoor LED fittings upto 101W-150W suitable to operate on 230V A.C.50 Hz. having pf>0.95 and THD<10%.

Repairing for 18 to 45 W LED flood light with SPD,Shouldering,cleaning etc complete with all required accessories

Repairing for 50 to 75 W LED flood light with SPD,Shouldering,cleaning etc complete with all required accessories

Repairing for76 W to 100wLED flood light with SPD,Shouldering,cleaning etc complete with all required accessories

Repairing for76 W to 150w LED flood light with SPD,Shouldering,cleaning etc complete with all required accessories

Repairing for 100 to 120 W flood light plate with al required accessories

providing for 100 to 120 W flood light plate with al required accessories

providing for 18w to 45 W flood light plate with al required accessories

providing for 46w to 75 W flood light plate with al required accessories

providing for 76w to 90 W flood light plate with al required accessories

Rewinding motor of the 1200/1400 mm ceiling fan and over hauling including minor repairs lubricating of ball bearings & bush bearing, and replacing condenser, screws etc. Testing of fan for original speed and consumption with guarantee for one year.

GOVERNMENT OF MAHARASHTRA PUBLIC WORKS DEPARTMENT (ELECTRICAL WING)CURRENT SCHEDULE OF RATES for 2021-2022(Note :- use of this item in very critical condition for detail Refer DTN)

shri Venketsh Traders Jalgaon

M/s Ingale Electrical