Sirsa Estimate for Repair of Super Sucker Sewer Cleaning Machine at Sirsa Town Distt. Sirsa

Amount

Works Details

Providing and fixing High pressure Jetting Pump having specification i.e. 1 No. triplex plunger, reciprocating pump of Pratissoli make having a flow and pressure rating of 400 LPM (+/- 3%) at 155 bar respectively

Providing and fixing of Hose pipe/Reel of Parker Make with following specifications: Length: 120 m I D: 32 mm (Appx. 1.25 inch) O D: 50 mm (Appx. 2 inch) Max. Working pressure 210 bar Min. Burst Pressure: 490 bar Construction: Thermoplastic Techno-polymer core with a two braided high tensile synthetic fiber pressure reinforcement. Outer cover made of thermoplastic techno polymer.

Providing and fixing of Suction Hose pipe 10 Nos., 150 mm dia., hose sections, each of 3 meters long. 1 No. deep suction tool of 150mm dia., The suction hose shall be of a lightweight, heavy duty, wire reinforced, PVC construction and fitted with a quick-connect coupling male female shall be supplied as a standard accessory

Coupling Hose Adopter 6” Male

Coupling Hose Adopter 6” Female

Providing and fixing of Nozzle for forward Jet (i) Round head Nozzle-1 No. (ii) Bullet Nozzle- 1 No. (iii) Conical head high trust Nozzle – 1No.

Providing and fixing of Nozzle for Reverse Jet i) Round head Nozzle-1 No. ii) Conical head high trust Nozzle – 1No.

Providing and fixing of New Cabin for vehicle No. HR67A9194 complete in all respects.

Providing and fixing of New Air Lever for Dump Tank of Super Sucker Machine

Providing and fixing of 1 Nos. 200mm i/d hose suction &Vacuum pipe 7.00 mtr including male female quick connecting coupling adaptor. The suction hose shall be of a lightweight, heavy duty, wire reinforced, PVC construction.

Providing and fixing of Full Torque Split Shaft PTO drive of TATA make having following specifications: Throughput Torque: 2000 KGM No. of outputs: Two (one main + one auxiliary) PTO Output rations: 1:1 on main shaft and 0.807:1 on auxiliary shaft

Providing and fixing of Mud Guard for complete set of Super Sucker Machine (4 No. vehicles)

Denting, painting and other repair for all vehicles of Super Sucker sewer machine

Routine Service including lubricants, Diesel filters and all consumable items for complete set of vehicles (4 No.) from the TATA Truck agency in presence of PHED official.

Providing and fixing of Check Valve (non-return, plate type) at the blower inlet to prevent backflow of air from the atmosphere to the tank when the equipment is stopped, maintain the vacuum in the sludge tank

Providing and fixing of Safety Valve for 3 plunger 400 LPM High Pressure Jetting Pump made from high quality Brass and stainless-steel valve seats.

Providing and fixing of new brake shoe for suction blower Engine 150 HP

Job work for carriage/transportation of complete set of 4 vehicles from PHED 1, Sirsa to the workshop and back including fuel and other expenses.

Providng and fixing of 1 No. Clear water tank of 4000 Ltr. Storage capacity, made of SS-304 grade with support and base complete in all respect as per the direction of Engineer-in-Charge.

Providing and fixing of new Diesel Engine driven pump set with following specifications Type : Centrifugal. Delivery rating : 275 LPM Drive : Diesel Driven, Single cylinder, rope start, air-cooled- 4 stroke engine. Power : 7.2 HP Make : Kirloskar The delivery of the pump set will be fitted with a 30 meter long flexible hose

Providing and fixing of batter of Capacity 12 V Battery 160-250 Ah (EXIDE/Microtek)

Providing and fixing 1000.20 Radial tyre of MRF/Apollo make complete in all respects.

Miscellaneous repair of 2 No. Dump tanks i.e. Filters, Air Valves, Internal pipe fittings etc. as per direction of Engineer-in-Charge and requirement.

Less old Battery

Less Old tyres

Less old 400 LPM High Pressure Jetting 3 Plunger Pump

Less old cabin

McCROMIK Industries