TO INCREASE CAPACITY TRANSFORMER AND CONSTRUCTION OF HT LT LINE BY INVITING RUNNING E TENDER UNDER EDD DIBAI.

Amount

fctusl Iyku ds vUrxZr fo|qr forj.k [k.M&fMckbZ {ks=kUrxZr {kerko`f)] Mcyiksy LFkkfir djus] ,p0Vh0@,y0Vh0 ykbZu fuekZ.k] ttZj rkj cnyus] yEcs Lisu esa iksy yxkus ,oa xkfMZax bR;kfn lEcU/kh dk;ZA

Carriage of fallowings from ESC BSR to pit site on kachcha pacaa road including loading and unloading chagres at both ends, required ccompletion of work, distance about to 0 to 70 Km. approx.

Carriage of All line Material from store to j.e store Sub-station as ACSR Weasel conductor, ABC conductor GI Wire, Earth Wire, M.S. Channel, Angle, Stay & Earthig Rods, Barbed Wire. Disc Insulator etc.

Carriage of PCC Pole 8.5 mtr long.

Carriage 63 KVA Transformer

Carriage 100 KVA Transformer

Erection of Single support including complete H.T./L.T. fittings as per RESPO manual and as per direction of Engineer incharge including the cost of labour, T&P and carrier etc. required for proper completion of work.

Erection of Double support including complete H.T./L.T. fittings as per RESPO manual and as per direction of Engineer incharge including the cost of labour, T&P and carrier etc. required for proper completion of work.

Grouting of Single support shall be grouted with cement, sand and birck ballast/stone ballast/stone ballast in ratio 1:4:8 =30x3030 cms. including the cost of Cement, Sand, Brick Ballast/Stone Ballast, etc. as per actual size requirement, as per RESPO manual and as per direction of Engineer in charge including the cost of labour, T&P and carrier etc. required for proper completion of work.

Grouting of Double pole support shall be grouted with cement, sand and birck ballast/stone ballast/stone ballast in ratio 1:4:8 =30x3030 cms. including the cost of Cement, Sand, Brick Ballast/Stone Ballast, etc. as per actual size requirement, as per RESPO manual and as per direction of Engineer in charge including the cost of labour, T&P and carrier etc. required for proper completion of work.

Mounting 63 KVA Transformer

Mounting 100 KVA Transformer

Fixing of Stay rod with Stay wire in proper way with Nozelling.

Grouting of Stays Rods.

Fixing of Earthing Rod complete

Laying, sagging. Stringing and binding and jumpering of ACSR Weisal, rabbit, dog newly erected poles as per RESPO manual and as per direction of Supervising Engineer. It includes the cost of labour, T&P, carrier etc. requried for proper completion of work.

ACSR weasal conductor

Gaurding of 11 kv Road crosing

The following material is required tobe supplied by the contractor.

Holding clamp.

Double pole Clamp.

LT Clamp

Bolts & nut off size.

F clamp

Stay clamp

Stay Insulator

Fabrication of Angle and Channel with drilling hole.

Extra Milage charges and carriage from PCC/ST Pole/TF & other material from each 10 Km.

Above work shall be done as per UPPCL/RESPO Rules.

A K ELECTRICAL ENG WORKS

R & D ENTERPRISES

NEHA ENTERPRISES