CERTAIN B AND R AND E AND M WORKS IN SAND MODEL ROOM CHANDRAGUPTA AND PROVN OF STREET LIGHT AT COOK HOUSE ROAD NEAR OR MESS AT MILIT GIRINAGAR PUNE

B/R PORTION Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

Taking down chowkats or frame of wooden or steel not exc 1.5 Sqm with shutters (without taking of shutter from the frame) complete all as specified and directed.

Taking down chowkats or frame of wooden or steel exc 1.5 Sqm but n.exc 4.0 sqm with shutters (without taking of shutter from the frame) complete all as specified and directed.

M&L for Forming jambs, etc. to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work in CM (1:6) complete all as specified and directed.

M&L for Making good under cills or over arches, lintels and bressummers. including all pinning when necessary in CM (1:6) complete all as specified and directed.

S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the styles & rails with suitable PVC sheet beading, and joined together with solvent cement as per specification complete all as specified and directed.

S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube in opening complete all as specified and directed.

S& F 100 mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed.

S & F 100 mm Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S & F 125 mm Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

M & L for plain cement concrete type D2 (1:4:8) (40 mm graded aggregate) as in foundations, filling and mass concrete etc complete all as specified and directed.

M & L for precast Cement concrete type C1 (1:3:6) (20 mm graded aggregate) as in win- dow or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings including hamfers, weatherings, throat- ing etc. and setting in cement mortar CM (1:6) complete with joints to match complete all as specified and directed.

M & L for rendering 15mm thick on cement concrete block masonry/concrete surfaces in cement mortar 1:4 finished surfaces complete all as specified and directed.

M & L for granite 20 mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in 20 mm thick cement mortar screed (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M & L for 20 mm thick Granite (of any type) work (table rubbed and polished) for wall lining, skirting, dedo etc (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Providing edge moulding to 18-20mm thick stone of counters, vanities etc. including machine polishing to edge to give high gloss finish etc complete all as specified and directed.

M & L for Virified Ceramic tiles dark shade/double charge/ultra charge 08 to 10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and incl 20 mm thick screed in CM (1:6) complete all as specified and directed.

M & L for Virified Ceramic tiles dark shade/double charge/ultra charge 08 to10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in skirting/dedo etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and incl 15 mm thick rendering in CM (1:6) complete all as specified and directed.

Demolition Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.

M&L for 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface any sunk or raised moulding over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh incl anodised aluminium snap grid frame work for false ceiling all as specified and hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed.

M&L for preparation of new wall surface applying two coat of plastic emulsion paint over and incl a coat of priming paint of any description over 10cm girth or width, not otherwise described complete all as specified and directed.

M & L for RCC type B1 (1:2:4) (20 mm graded aggregate) nominl mix as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

S & F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and directed.

S & F 12 mm thick frame less toughned glass door shutter of approved brand and manufacture, including etching glass with all accessories hinges, handle, locking arrengement and making necessary holes etc. for fixing required door fittings complete all as specified and directed.

M & L Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc complete all as specified and directed.

M & L post construction antitermite treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc in apron complete all as specified and directed.

S & F Solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet used instead of plain colour sheet inclusive of solvent cement and fixing at site on PVC frame complete all as specified and directed.

S & F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame complete all as specified and directed.

Taking up or down 15 mm bore steel tubing and connections, including cleaning for refixing or removal complete all as specified and directed.

Taking up or down 20 mm bore steel tubing and connections, including cleaning for refixing or removal complete all as specified and directed.

Supplying and laying of 16 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed.

Supplying and laying of 20 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed.

M&L for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed.

Dismantling exc 250 but n. exc 500 ltrs capacity water tanks complete all as specified and directed.

S & F HDPE 500 ltrs Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed.

S & F 20 mm bore Nipple suitable for HDPE water tank. (Minimum weight 15 mm-38gms/20mm-45gms /25mm- 65gms) complete all as specified and directed.

M & L for Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/2 0 m m - 2 1 0 gms /25mm-455gms/ 40mm - 690 gms) complete all as specified and directed.

S & F in repair PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed.

S & F in repair Rimless Single Piece (Fusion) WC with UF Soft Close Slim Seat Cover, Hinges, Dual Flush Cistern Fitting, Fixing Accessories And Accessories Set, Size: 380x670x765 mm, S Trap- 300 mm complete all as specified and directed. Make - Jaquar or equivalant Cat No - FSS-WHT-29853S300UFSM or equivalent model as per approved list of makes.

S & F in repair 15 mm bore Bib Tap (Straight Line Model) with Wall Flange complete all as specified and directed. Make - Jaquar Cat No - SOL-CHR-6047 or equivalent model as per approved list of makes.

S & F in repair In-wall Stop Valve with Adjustable Wall Flange, Size 15 mm (With Exposed and In-wall parts) complete all as specified and directed. Make - Jaquar Cat No - SOL-CHR-6083 or equivalent model as per approved list of makes.

S & F in repair Round Shape Overhead Shower Single Function 120mm Round Shape Overhead Shower complete all as specified and directed. Make - Jaquar Cat No - OHS-CHR-1789 or equivalent model as per approved list of makes.

S & F in repair Health Faucet Kit (Flexible Hose, Handset & Bracket) complete all as specified and directed. Make - Jaquar Cat No -ALD-573 or equivalent model as per approved list of makes.

S & F in repair 15 mm bore Angle Valve with Wall Flange complete all as specified and directed. Make - Jaquar Cat No -SOL-6053 or equivalent model as per approved list of makes.

S & F in repair Urinal without Sensor with Fixing Accessories, Size: 480 x 300 x 740 mm complete all as specified and directed. Make - Jaquar Cat No -URS-WHT-13255 or equivalent model as per approved list of makes.

S & F in repair 15 mm bore Sink Pillar Tap with Swivel Spout complete all as specified and directed. Make - Jaquar Cat No -SOL-6357 or equivalent model as per approved list of makes.

S & F in repair Thin Rim Table Top Basin,Size: 455x455x110 mm, Shape - Round complete all as specified and directed. Make - Jaquar Cat No -JDS-WHT-25939 or equivalent model as per approved list of makes.

S & F in repair angle cock 2 way with wall flange complete all as specified and directed. Make - Hindware Italian collection starc or equivalant Cat No -F530006 or equivalent model as per approved list of makes.

Taking down plastering on lathing (other than wire-netting), without removing lathing, in cement mortar (one side only measured in cases where both sides are plastered) complete all as specified and directed.

M & L for Injecting low viscosity grade epoxy grout by pressure by epoxy or grouting pump and compressor. Mixing :- Material components shall be as per manufacturerers instructions. Grouting :- fill the grouting gun with resin mix maintain desired pressure at exit (7 to 10 kg /sqcm) by monitoring pressure gauge at exit. Grout the material through prefixed nozzles in the structural elements till its refusal, seal the nozzle with epoxy sealant (EPCO 10 10) after the refusal. Monitor leakages through other nozzles while grouting and seal them as per the requirement. Repeat the process all the nozzles. Complete the penetration at pot life of material, grouting is continued to all the nozzles from bottom to top and not from top to bottom. cleaning the gun and accessories (Valves, pipes and other fixtures) with T-60 thinner / or equivalent as per approved list of make approval. The work should be helmet, safety belt and adequate labour insurance under the supervision of qualified supervisor etc. complete all as specified and directed. NOTE : Gurantee shall be given all as specified.

M & L for Wire netting of galvanised steel wire 1.40mm dia and 25 mm size of mash fixed with tinned tacks of wire staples complete all as specified and directed.

M&L for complete removal of existing treatment on wall and applying two coat Oil bound distemper over a coat of primer complete all as specified and directed.

M & L for Preparing surfaces plastered or unplastered on new surface wall and applying two coat Oil bound distemper over a coat of primer complete all as specified and directed.

E/M PORTION Taking down copper / aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc removing materials for taking credit and making good disturbed surfaces of walls, floors and roofs etc complete all as specified and directed.

Taking down sub main wiring complete including fitting and fixtures, removing materials for taking credit and making good disturbed surfaces of walls, floors, roof etc, complete all as specified and directed.

Taking down carefully unserviceable DBs any type/size With MCCBs/ MCBs/ Isolator etc and disconnecting and making good disturbed surfaces complete all as specified and directed.

M&L Point wiring complete with 1.5 sqmm single core PVC insulated and unsheathed cable 1100 volts, FRLSH grade with multistranded copper conductor ISI marked drawn through heavy duty PVC conduit concealed in walls / roofs / floors / ceiling etc. and including provision of 1.5 sqmm stranded copper conductor cable as earth continuity conductor and connected to common earth dolly including concealed modular flush boxes including Modular box, modular cover plates with frame mounting for housing the switches, socket outlets etc complete all as specified and directed. (a) One light point/fan/exhaust fan point controlled by one way switch.

(b) One 3 pin switch socket outlet point 5 Amps on independent board.

(c) One 3 pin switch socket outlet point 5 Amps on same board with other switch.

All as per item above here in before but with copper conductor cable for one 3 pin socket outlet, 15 amp independent, with cable 3 core X 4 sqmm size complete all as specified and directed.

S & Fix modular switch 1 way 6A, 1 module complete all as specified and directed.

S & Fix modular switch1 way 16A, 1 module complete all as specified and directed.

S & Fix modular socket out let 6A 2/3 on combined 2 module complete all as specified and directed.

S & Fix modular socket out let 6A/16A-2/3 pin combined 2 module complete all as specified and directed.

S & Fix Ceiling rose surface backlite 65x50mm 3 terminals complete all as specified and directed.

S&Fix fan regulator electronic 2 modular type volts AC 50 HZ, 300 Watts, 4step complete all as specified and directed.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S & Fix recessed mounted round down light 30 W LED luminaire environmental friendly, new generation, decorative IP43 LED with white powder coated aluminium housing and pressure die-cast heat sink having high efficiency, energy saving complete fitting with all fixing arrangement complete all as specified and directed.

S & Fix LED focus light fitting 7 W luminaire environmental friendly, new generation, energy saving, decorative IP43 LED focus light using COB LED as light source complete fitting with all fixing arrangement complete all as specified and directed.

S & Fixing of LED Strip 6 W per RM, environmental friendly, new generation, energy saving, decorative IP43 complete fitting with all fixing arrangement complete all as specified and directed.

S & Fix surface mounted round down light 12 W LED luminaire environmental friendly, new generation, decorative IP43 LED with white powder coated aluminium housing and pressure die-cast heat sink having high efficiency, energy saving complete fitting with all fixing arrangement complete all as specified and directed.

Supply and fix exhaust fan in replacement made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete all as specified and directed.

S & Fix of MCCB DB VTPN 6 ways, with metal double door, IP-43 protection suitable for MCCB as incommer and MCB as out going, VTPN DB's 415 volt 3 phase complete with appropriate size copper bus bar and neutral link as required at site and including cutting chases to wall for fixing of DB and making good distrubed wall /surface all as required at site complete all as specified and directed..

S & Fix of MCCB DB VTPN 4 ways, with metal double door, IP -43 protection suitable for MCCB as incommer and MCB as out going, VTPN DB's 415 volt 3 phase complete with appropriate size copper bus bar and neutral link as required at site and including cutting chases to wall for fixing of DB and making good distrubed wall/surface all as required at site complete all as specified and directed.

S & Fix of MCCB Four pole, 415 volts, 100 Ampere, rupturing capacity 25 KA complete all as specified and directed.

S & Fix sheet metal enclosure distribution board SPN, 8 ways 240 volts, with 100 amps rated bus bar, with IP 43 protection and double door, suitable for mounting MCBs all as specified and as directed including taking down old MCB DB complete all as specified and directed.

S & Fix of MCB single pole and neutral, 240 volts, 6 to 40 Ampere, rupturing capacity 10 KA, ‘C’ series complete all as specified and directed.

S & Fix of MCB single pole, 240 volts, 6 to 40 Ampere, rupturing capacity 10 KA, ‘C’ series complete all as specified and directed.

S & Fix Metal plug and socket DB's with MCB 20A SP for AC complete all as specified and directed.

S & Fix TV socket connector modular type fixed on wall conceled and including modular cover plates and modular flush boxes for mounting of TV socket etc complete all as specified and directed.

S & Fix Telephone socket connector RJ 11 modular type fixed on wall conceled and including modular cover plates and modular flush boxes for mounting of Telephone socket etc complete all as specified and directed.

S & F Cover plate with frame for telephone socket RJ-11(Jac type) Modular type, two module with pressed metal flush box made out of 2 mm thick MS sheet complete all as specified and directed.

S & Fix PVC conduit 25 mm size run in wall/ surface for provision for Telephone cable/ TV cable fixed on wall conceled and including dismantling of old pipes, cutting chasis, pinning in and making good to disturbed surfaces etc complete all as specified and directed.

M & L for submain wiring alongwith earth wire with the following sizes of FRLSH PVC insulated copper conductor single core cable , multistranded Concealed and including suitable size of Concealed conduit with its all accessories complete all as specified and directed for the following: (a) 2x4.0 sq mm and 1x4 sq mm as earth wire.

(b) 2x6.0 sq mm and 1x6 sq mm as earth wire.

M&L For Earthing complete with galvanised steel earth plate electrode 60 × 60cm × 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion all as specified nd indicated testing on completion including fill up the earth pit with soil for best result and removal of excavated material from the site complete all as specified and directed. Note :- Earth protection pipe & earthing lead wireupto and including 7.5 m length is deemed included in unit rate quoted by the contractor.

Taking down split type AC capacity 1.5/2.0 ton for throughout checking and servicing of indoor/out door unit, replacing the defective parts of its smooth functioning or taking out compressor unit from the unit duly cutting the copper tubings and taking out the same for replacement all as specified and directed and refixing the same after servicing, gas charging and replacement of defective/wornout part complete all as specified ad directed. Notes :- 1.Spare parts will be measured and paid separately under respective items of Sch, 2. T & P required for lifting /lowering at site is contractor responsibility)

Supply and fixing in replacement of AC compressor suitable for 1.5/2.0 ton capacity air conditioning (type of compressor as per existing) with all accessories duly connecting and soldering/ brazing of copper tubings etc and leak testing and charging of gas etc. complete including testing complete all as specified ad directed.

S & F in replacement of AC copper condenser coil suitable for split type AC 1.5/2.0 TR as per sample complete all as specified ad directed.

S&F in replacement remote suitable for 1.5/2.0 Ton AC complete all as specified ad directed.

Supply and fix suction and discharge copper tubing pipe 3/8" and 5/8" for split type AC including provision of insulation on tubing, PVC insulated flexible multistranded copper cable 3 core 2.5 sqmm complete all as specified ad directed.

M&L for PVC drain pipe for additional length as required on site complete all as specified ad directed.

M&L for core cutting into or through cement concrete slabs,chajjas etc. reinforced for making holes for split AC piping including making good the disturbed surfaces and proper lean cement packing etc complete all as specified ad directed.

Supply, laying and testing cable LT XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size complete all as specified and directed. (a) 185 sq mm 3.5 core

(b) 50 sq mm 3.5 core

Supplying and laying of following size DWC pipe ISI marked along with all accessories etc confirming to IS 14930, part II complete with fitting and cutting, jointing etc. in trench/open, for LT UG cable protection complete all as specified and directed of size:- (a) 80 mm bore

(b) 40 mm bore

Supply and fixing GI tubing (ISI Marked), light grade for cable protection with all necessary fittings as required, laid in trenches, under road/floors or on electric poles complete all as specified and directed of size :- (a) 80 mm bore

(b) 40 mm bore

M&L for road cutting upto 45 cms width and depth 60 to 75 cm for laying GI pipe light grade/ hume pipe for cable protection including returning filling in and making good the disturbed portion to match with the existing roads by cement/ bitumen complete all as specified and directed.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m wide and not exceeding 1.5 m depth and getting out soft / loose soil for laying cables / pipes / erection of poles etc complete all as specified and directed.

Removing excavated material (soil) not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.

Returning filling in soil including spreading levelling watering well ramming in layers not exceeding 25 cm each complete all as specified and directed.

Supply, erecting and fixing in true vertical position, steel tubular swaged pole (410 SP – 31), 9mtr long, complete with cast iron base plate, pole cap / finial taper plug, bolts, nuts and washers, welded reduced section and longitudinal weld throughout entire length of pole with and including necessary earth work in any type of soil and disposal of surplus soil to a distance not exceeding 50 mtr, PCC (1:4:8) type D-2 (using 40 mm graded sand stone aggregate) in the base and foundation upto ground level and PCC (1:2:4) type B-1 (using 20 mm graded black trap/granite/basalt stone aggregate) for coping of the pole including necessary form work including 2 coats of black bituminous paint externally upto planting depth and remaining exterior portion of pole shall be provided with one coat of red oxide primer and two coats of aluminium paint including numbering the poles complete all the metallic surfaces complete all as specified and directed.

Supply and fixing LED street light fitting 60 Watt 230 V AC with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics including 3 core cable connection from light fitting to junction box with IP 65/66 protection complete all as specified and directed.

Supply and laying XLPE insulated, armoured heavy duty electric cable with stranded aluminium conductor, 1100 volts grade, cross-sectional area 10 sqmm, 4 core complete all as specified and directed.

Supply & fixing DWC Pipe heavy duty minimum 32 mm dia of required length for protection of cables complete including necessary MS clamps, nuts, bolts fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F street light bracket in replacement of length 1.20 meter made of GI pipe medium grade 25 mm bore bent to shape to fixed on LT poles including MS clamps nuts bolts etc complete all as specified and directed.

Supply and fixing of street light thermoplastic cable junction box in replacement of size 200 x 140 x 95 mm for outdoor installation with TPN terminal for cable in and out suitable for 4 core cable entry complete all as specified and directed.

Excavation in trenches in soft/loose soil n exc 1.5m wide and n.exc 1.5m in depth and getting out complete all as specified and directed.

Returning, filiing in incl spreading, leveling watering and well ramming excavated soil in layers not exceeding 25 cm thick each, filling back in trenches after cables have been laid and tested complete all as specified and directed.

Removing excavated surplus soil obtained from excavation to a distance not exceeding 1.5 m above the starting point, complete all as specified and directed.

M&L for Road cutting for laying LT cable and make good disturbed surafaces complete all as specified and directed.

Supply and fixing GI tubing (ISI Marked), light grade 32 mm bore for cable protection with all necessary fittings as required, laid in trenches, under road/floors or on electric poles complete all as specified and directed.

Please Enable Macros to View BoQ information